Mark Brown e8eef82b2c regulator: Provide a selector based set_voltage_sel() operation ... Many regulator drivers implement voltage setting by looping through a table of possible values, normally because the set of available voltages can't be mapped onto selectors with simple calcuation. Factor out these loops by providing a variant of set_voltage() which takes a selector rather than a voltage range as an argument and implementing a loop through the available selectors in the core. This is not going to be suitable for use with all devices as when the regulator voltage can be mapped onto selector values with a simple calculation the linear scan through the available values will be more expensive than just doing the calculation, especially for regulators that provide fine grained voltage control. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>		2011-01-12 14:33:04 +00:00
..
88pm8607.c	regulator: Report actual configured voltage to set_voltage()	2011-01-12 14:32:59 +00:00
ab3100.c	regulator: Report actual configured voltage to set_voltage()	2011-01-12 14:32:59 +00:00
ab8500.c	regulators: Removed macros for initialization of ab8500 regulators	2011-01-12 14:33:03 +00:00
ad5398.c	i2c: Remove obsolete cleanup for clientdata	2010-09-30 14:14:22 +02:00
bq24022.c	Regulators: ab3100/bq24022: add a missing .owner field in regulator_desc	2010-05-25 10:16:02 +01:00
core.c	regulator: Provide a selector based set_voltage_sel() operation	2011-01-12 14:33:04 +00:00
da903x.c	regulator: Report actual configured voltage to set_voltage()	2011-01-12 14:32:59 +00:00
dummy.c	regulator: Provide optional dummy regulator for consumers	2010-03-03 14:49:26 +00:00
dummy.h	regulator: fix build when CONFIG_REGULATOR_DUMMY=n	2010-10-28 22:40:32 +01:00
fixed.c	include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h	2010-03-30 22:02:32 +09:00
isl6271a-regulator.c	regulator: Report actual configured voltage to set_voltage()	2011-01-12 14:32:59 +00:00
Kconfig	regulator: Allow modular build of mc13xxx-core	2011-01-12 14:33:03 +00:00
lp3971.c	regulator: Report actual configured voltage to set_voltage()	2011-01-12 14:32:59 +00:00
lp3972.c	regulator: Report actual configured voltage to set_voltage()	2011-01-12 14:32:59 +00:00
Makefile	regulator: support PMIC mc13892	2011-01-12 14:33:03 +00:00
max1586.c	regulator: Report actual configured voltage to set_voltage()	2011-01-12 14:32:59 +00:00
max8649.c	regulator: Report actual configured voltage to set_voltage()	2011-01-12 14:32:59 +00:00
max8660.c	regulator: Report actual configured voltage to set_voltage()	2011-01-12 14:32:59 +00:00
max8925-regulator.c	regulator: Report actual configured voltage to set_voltage()	2011-01-12 14:32:59 +00:00
max8952.c	regulator: Report actual configured voltage to set_voltage()	2011-01-12 14:32:59 +00:00
max8998.c	regulator: Fix prototype for MAX8998 buck set_voltage()	2011-01-12 14:33:01 +00:00
mc13xxx-regulator-core.c	regulator: Allow modular build of mc13xxx-core	2011-01-12 14:33:03 +00:00
mc13xxx.h	make mc13783 regulator code generic	2011-01-12 14:33:03 +00:00
mc13783-regulator.c	make mc13783 regulator code generic	2011-01-12 14:33:03 +00:00
mc13892-regulator.c	regulator: support PMIC mc13892	2011-01-12 14:33:03 +00:00
pcap-regulator.c	regulator: Fix typo in PCAP regulator_set_voltage()	2011-01-12 14:33:00 +00:00
pcf50633-regulator.c	regulator: Report actual configured voltage to set_voltage()	2011-01-12 14:32:59 +00:00
tps6507x-regulator.c	regulator: Report actual configured voltage to set_voltage()	2011-01-12 14:32:59 +00:00
tps6524x-regulator.c	regulator: add driver for tps6524x regulator	2011-01-12 14:33:02 +00:00
tps6586x-regulator.c	regulator: Report actual configured voltage to set_voltage()	2011-01-12 14:32:59 +00:00
tps65023-regulator.c	regulator: Report actual configured voltage to set_voltage()	2011-01-12 14:32:59 +00:00
twl-regulator.c	regulator: Report actual configured voltage to set_voltage()	2011-01-12 14:32:59 +00:00
userspace-consumer.c	include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h	2010-03-30 22:02:32 +09:00
virtual.c	include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h	2010-03-30 22:02:32 +09:00
wm831x-dcdc.c	regulator: Convert WM831x drivers to use get_voltage_sel()	2011-01-12 14:33:02 +00:00
wm831x-isink.c	include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h	2010-03-30 22:02:32 +09:00
wm831x-ldo.c	regulator: Convert WM831x drivers to use get_voltage_sel()	2011-01-12 14:33:02 +00:00
wm8350-regulator.c	regulator: Convert WM835x to use get_voltage_sel()	2011-01-12 14:33:04 +00:00
wm8400-regulator.c	regulator: Report actual configured voltage to set_voltage()	2011-01-12 14:32:59 +00:00
wm8994-regulator.c	regulator: Convert WM8994 to use get_voltage_sel()	2011-01-12 14:33:04 +00:00