mirror of
https://github.com/torvalds/linux.git
synced 2024-11-18 10:01:43 +00:00
8349304d12
For the vast majority of CardType[card->typ] uses (but not all!), the string is constant for each driver. Therefore, we may replace CardType[card->typ] with the actual string describing the driver, making each printk() a bit more simple. This also has the nice, intended side effect of greatly reducing external references to hisax global CardType[]. This will be of value once the ISDN drivers are converted to the ISA/PCI/PNP hotplug APIs. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
436 lines
12 KiB
C
436 lines
12 KiB
C
/* $Id: bkm_a8.c,v 1.22.2.4 2004/01/15 14:02:34 keil Exp $
|
|
*
|
|
* low level stuff for Scitel Quadro (4*S0, passive)
|
|
*
|
|
* Author Roland Klabunde
|
|
* Copyright by Roland Klabunde <R.Klabunde@Berkom.de>
|
|
*
|
|
* This software may be used and distributed according to the terms
|
|
* of the GNU General Public License, incorporated herein by reference.
|
|
*
|
|
*/
|
|
|
|
|
|
#include <linux/init.h>
|
|
#include "hisax.h"
|
|
#include "isac.h"
|
|
#include "ipac.h"
|
|
#include "hscx.h"
|
|
#include "isdnl1.h"
|
|
#include <linux/pci.h>
|
|
#include "bkm_ax.h"
|
|
|
|
#define ATTEMPT_PCI_REMAPPING /* Required for PLX rev 1 */
|
|
|
|
static const char sct_quadro_revision[] = "$Revision: 1.22.2.4 $";
|
|
|
|
static const char *sct_quadro_subtypes[] =
|
|
{
|
|
"",
|
|
"#1",
|
|
"#2",
|
|
"#3",
|
|
"#4"
|
|
};
|
|
|
|
|
|
#define wordout(addr,val) outw(val,addr)
|
|
#define wordin(addr) inw(addr)
|
|
|
|
static inline u_char
|
|
readreg(unsigned int ale, unsigned int adr, u_char off)
|
|
{
|
|
register u_char ret;
|
|
wordout(ale, off);
|
|
ret = wordin(adr) & 0xFF;
|
|
return (ret);
|
|
}
|
|
|
|
static inline void
|
|
readfifo(unsigned int ale, unsigned int adr, u_char off, u_char * data, int size)
|
|
{
|
|
int i;
|
|
wordout(ale, off);
|
|
for (i = 0; i < size; i++)
|
|
data[i] = wordin(adr) & 0xFF;
|
|
}
|
|
|
|
|
|
static inline void
|
|
writereg(unsigned int ale, unsigned int adr, u_char off, u_char data)
|
|
{
|
|
wordout(ale, off);
|
|
wordout(adr, data);
|
|
}
|
|
|
|
static inline void
|
|
writefifo(unsigned int ale, unsigned int adr, u_char off, u_char * data, int size)
|
|
{
|
|
int i;
|
|
wordout(ale, off);
|
|
for (i = 0; i < size; i++)
|
|
wordout(adr, data[i]);
|
|
}
|
|
|
|
/* Interface functions */
|
|
|
|
static u_char
|
|
ReadISAC(struct IsdnCardState *cs, u_char offset)
|
|
{
|
|
return (readreg(cs->hw.ax.base, cs->hw.ax.data_adr, offset | 0x80));
|
|
}
|
|
|
|
static void
|
|
WriteISAC(struct IsdnCardState *cs, u_char offset, u_char value)
|
|
{
|
|
writereg(cs->hw.ax.base, cs->hw.ax.data_adr, offset | 0x80, value);
|
|
}
|
|
|
|
static void
|
|
ReadISACfifo(struct IsdnCardState *cs, u_char * data, int size)
|
|
{
|
|
readfifo(cs->hw.ax.base, cs->hw.ax.data_adr, 0x80, data, size);
|
|
}
|
|
|
|
static void
|
|
WriteISACfifo(struct IsdnCardState *cs, u_char * data, int size)
|
|
{
|
|
writefifo(cs->hw.ax.base, cs->hw.ax.data_adr, 0x80, data, size);
|
|
}
|
|
|
|
|
|
static u_char
|
|
ReadHSCX(struct IsdnCardState *cs, int hscx, u_char offset)
|
|
{
|
|
return (readreg(cs->hw.ax.base, cs->hw.ax.data_adr, offset + (hscx ? 0x40 : 0)));
|
|
}
|
|
|
|
static void
|
|
WriteHSCX(struct IsdnCardState *cs, int hscx, u_char offset, u_char value)
|
|
{
|
|
writereg(cs->hw.ax.base, cs->hw.ax.data_adr, offset + (hscx ? 0x40 : 0), value);
|
|
}
|
|
|
|
/* Set the specific ipac to active */
|
|
static void
|
|
set_ipac_active(struct IsdnCardState *cs, u_int active)
|
|
{
|
|
/* set irq mask */
|
|
writereg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_MASK,
|
|
active ? 0xc0 : 0xff);
|
|
}
|
|
|
|
/*
|
|
* fast interrupt HSCX stuff goes here
|
|
*/
|
|
|
|
#define READHSCX(cs, nr, reg) readreg(cs->hw.ax.base, \
|
|
cs->hw.ax.data_adr, reg + (nr ? 0x40 : 0))
|
|
#define WRITEHSCX(cs, nr, reg, data) writereg(cs->hw.ax.base, \
|
|
cs->hw.ax.data_adr, reg + (nr ? 0x40 : 0), data)
|
|
#define READHSCXFIFO(cs, nr, ptr, cnt) readfifo(cs->hw.ax.base, \
|
|
cs->hw.ax.data_adr, (nr ? 0x40 : 0), ptr, cnt)
|
|
#define WRITEHSCXFIFO(cs, nr, ptr, cnt) writefifo(cs->hw.ax.base, \
|
|
cs->hw.ax.data_adr, (nr ? 0x40 : 0), ptr, cnt)
|
|
|
|
#include "hscx_irq.c"
|
|
|
|
static irqreturn_t
|
|
bkm_interrupt_ipac(int intno, void *dev_id)
|
|
{
|
|
struct IsdnCardState *cs = dev_id;
|
|
u_char ista, val, icnt = 5;
|
|
u_long flags;
|
|
|
|
spin_lock_irqsave(&cs->lock, flags);
|
|
ista = readreg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_ISTA);
|
|
if (!(ista & 0x3f)) { /* not this IPAC */
|
|
spin_unlock_irqrestore(&cs->lock, flags);
|
|
return IRQ_NONE;
|
|
}
|
|
Start_IPAC:
|
|
if (cs->debug & L1_DEB_IPAC)
|
|
debugl1(cs, "IPAC ISTA %02X", ista);
|
|
if (ista & 0x0f) {
|
|
val = readreg(cs->hw.ax.base, cs->hw.ax.data_adr, HSCX_ISTA + 0x40);
|
|
if (ista & 0x01)
|
|
val |= 0x01;
|
|
if (ista & 0x04)
|
|
val |= 0x02;
|
|
if (ista & 0x08)
|
|
val |= 0x04;
|
|
if (val) {
|
|
hscx_int_main(cs, val);
|
|
}
|
|
}
|
|
if (ista & 0x20) {
|
|
val = 0xfe & readreg(cs->hw.ax.base, cs->hw.ax.data_adr, ISAC_ISTA | 0x80);
|
|
if (val) {
|
|
isac_interrupt(cs, val);
|
|
}
|
|
}
|
|
if (ista & 0x10) {
|
|
val = 0x01;
|
|
isac_interrupt(cs, val);
|
|
}
|
|
ista = readreg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_ISTA);
|
|
if ((ista & 0x3f) && icnt) {
|
|
icnt--;
|
|
goto Start_IPAC;
|
|
}
|
|
if (!icnt)
|
|
printk(KERN_WARNING "HiSax: Scitel Quadro (%s) IRQ LOOP\n",
|
|
sct_quadro_subtypes[cs->subtyp]);
|
|
writereg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_MASK, 0xFF);
|
|
writereg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_MASK, 0xC0);
|
|
spin_unlock_irqrestore(&cs->lock, flags);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void
|
|
release_io_sct_quadro(struct IsdnCardState *cs)
|
|
{
|
|
release_region(cs->hw.ax.base & 0xffffffc0, 128);
|
|
if (cs->subtyp == SCT_1)
|
|
release_region(cs->hw.ax.plx_adr, 64);
|
|
}
|
|
|
|
static void
|
|
enable_bkm_int(struct IsdnCardState *cs, unsigned bEnable)
|
|
{
|
|
if (cs->typ == ISDN_CTYPE_SCT_QUADRO) {
|
|
if (bEnable)
|
|
wordout(cs->hw.ax.plx_adr + 0x4C, (wordin(cs->hw.ax.plx_adr + 0x4C) | 0x41));
|
|
else
|
|
wordout(cs->hw.ax.plx_adr + 0x4C, (wordin(cs->hw.ax.plx_adr + 0x4C) & ~0x41));
|
|
}
|
|
}
|
|
|
|
static void
|
|
reset_bkm(struct IsdnCardState *cs)
|
|
{
|
|
if (cs->subtyp == SCT_1) {
|
|
wordout(cs->hw.ax.plx_adr + 0x50, (wordin(cs->hw.ax.plx_adr + 0x50) & ~4));
|
|
mdelay(10);
|
|
/* Remove the soft reset */
|
|
wordout(cs->hw.ax.plx_adr + 0x50, (wordin(cs->hw.ax.plx_adr + 0x50) | 4));
|
|
mdelay(10);
|
|
}
|
|
}
|
|
|
|
static int
|
|
BKM_card_msg(struct IsdnCardState *cs, int mt, void *arg)
|
|
{
|
|
u_long flags;
|
|
|
|
switch (mt) {
|
|
case CARD_RESET:
|
|
spin_lock_irqsave(&cs->lock, flags);
|
|
/* Disable ints */
|
|
set_ipac_active(cs, 0);
|
|
enable_bkm_int(cs, 0);
|
|
reset_bkm(cs);
|
|
spin_unlock_irqrestore(&cs->lock, flags);
|
|
return (0);
|
|
case CARD_RELEASE:
|
|
/* Sanity */
|
|
spin_lock_irqsave(&cs->lock, flags);
|
|
set_ipac_active(cs, 0);
|
|
enable_bkm_int(cs, 0);
|
|
spin_unlock_irqrestore(&cs->lock, flags);
|
|
release_io_sct_quadro(cs);
|
|
return (0);
|
|
case CARD_INIT:
|
|
spin_lock_irqsave(&cs->lock, flags);
|
|
cs->debug |= L1_DEB_IPAC;
|
|
set_ipac_active(cs, 1);
|
|
inithscxisac(cs, 3);
|
|
/* Enable ints */
|
|
enable_bkm_int(cs, 1);
|
|
spin_unlock_irqrestore(&cs->lock, flags);
|
|
return (0);
|
|
case CARD_TEST:
|
|
return (0);
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
static int __devinit
|
|
sct_alloc_io(u_int adr, u_int len)
|
|
{
|
|
if (!request_region(adr, len, "scitel")) {
|
|
printk(KERN_WARNING
|
|
"HiSax: Scitel port %#x-%#x already in use\n",
|
|
adr, adr + len);
|
|
return (1);
|
|
}
|
|
return(0);
|
|
}
|
|
|
|
static struct pci_dev *dev_a8 __devinitdata = NULL;
|
|
static u16 sub_vendor_id __devinitdata = 0;
|
|
static u16 sub_sys_id __devinitdata = 0;
|
|
static u_char pci_bus __devinitdata = 0;
|
|
static u_char pci_device_fn __devinitdata = 0;
|
|
static u_char pci_irq __devinitdata = 0;
|
|
|
|
int __devinit
|
|
setup_sct_quadro(struct IsdnCard *card)
|
|
{
|
|
struct IsdnCardState *cs = card->cs;
|
|
char tmp[64];
|
|
u_int found = 0;
|
|
u_int pci_ioaddr1, pci_ioaddr2, pci_ioaddr3, pci_ioaddr4, pci_ioaddr5;
|
|
|
|
strcpy(tmp, sct_quadro_revision);
|
|
printk(KERN_INFO "HiSax: T-Berkom driver Rev. %s\n", HiSax_getrev(tmp));
|
|
if (cs->typ == ISDN_CTYPE_SCT_QUADRO) {
|
|
cs->subtyp = SCT_1; /* Preset */
|
|
} else
|
|
return (0);
|
|
|
|
/* Identify subtype by para[0] */
|
|
if (card->para[0] >= SCT_1 && card->para[0] <= SCT_4)
|
|
cs->subtyp = card->para[0];
|
|
else {
|
|
printk(KERN_WARNING "HiSax: Scitel Quadro: Invalid "
|
|
"subcontroller in configuration, default to 1\n");
|
|
return (0);
|
|
}
|
|
if ((cs->subtyp != SCT_1) && ((sub_sys_id != PCI_DEVICE_ID_BERKOM_SCITEL_QUADRO) ||
|
|
(sub_vendor_id != PCI_VENDOR_ID_BERKOM)))
|
|
return (0);
|
|
if (cs->subtyp == SCT_1) {
|
|
while ((dev_a8 = pci_find_device(PCI_VENDOR_ID_PLX,
|
|
PCI_DEVICE_ID_PLX_9050, dev_a8))) {
|
|
|
|
sub_vendor_id = dev_a8->subsystem_vendor;
|
|
sub_sys_id = dev_a8->subsystem_device;
|
|
if ((sub_sys_id == PCI_DEVICE_ID_BERKOM_SCITEL_QUADRO) &&
|
|
(sub_vendor_id == PCI_VENDOR_ID_BERKOM)) {
|
|
if (pci_enable_device(dev_a8))
|
|
return(0);
|
|
pci_ioaddr1 = pci_resource_start(dev_a8, 1);
|
|
pci_irq = dev_a8->irq;
|
|
pci_bus = dev_a8->bus->number;
|
|
pci_device_fn = dev_a8->devfn;
|
|
found = 1;
|
|
break;
|
|
}
|
|
}
|
|
if (!found) {
|
|
printk(KERN_WARNING "HiSax: Scitel Quadro (%s): "
|
|
"Card not found\n",
|
|
sct_quadro_subtypes[cs->subtyp]);
|
|
return (0);
|
|
}
|
|
#ifdef ATTEMPT_PCI_REMAPPING
|
|
/* HACK: PLX revision 1 bug: PLX address bit 7 must not be set */
|
|
if ((pci_ioaddr1 & 0x80) && (dev_a8->revision == 1)) {
|
|
printk(KERN_WARNING "HiSax: Scitel Quadro (%s): "
|
|
"PLX rev 1, remapping required!\n",
|
|
sct_quadro_subtypes[cs->subtyp]);
|
|
/* Restart PCI negotiation */
|
|
pci_write_config_dword(dev_a8, PCI_BASE_ADDRESS_1, (u_int) - 1);
|
|
/* Move up by 0x80 byte */
|
|
pci_ioaddr1 += 0x80;
|
|
pci_ioaddr1 &= PCI_BASE_ADDRESS_IO_MASK;
|
|
pci_write_config_dword(dev_a8, PCI_BASE_ADDRESS_1, pci_ioaddr1);
|
|
dev_a8->resource[ 1].start = pci_ioaddr1;
|
|
}
|
|
#endif /* End HACK */
|
|
}
|
|
if (!pci_irq) { /* IRQ range check ?? */
|
|
printk(KERN_WARNING "HiSax: Scitel Quadro (%s): No IRQ\n",
|
|
sct_quadro_subtypes[cs->subtyp]);
|
|
return (0);
|
|
}
|
|
pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_1, &pci_ioaddr1);
|
|
pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_2, &pci_ioaddr2);
|
|
pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_3, &pci_ioaddr3);
|
|
pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_4, &pci_ioaddr4);
|
|
pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_5, &pci_ioaddr5);
|
|
if (!pci_ioaddr1 || !pci_ioaddr2 || !pci_ioaddr3 || !pci_ioaddr4 || !pci_ioaddr5) {
|
|
printk(KERN_WARNING "HiSax: Scitel Quadro (%s): "
|
|
"No IO base address(es)\n",
|
|
sct_quadro_subtypes[cs->subtyp]);
|
|
return (0);
|
|
}
|
|
pci_ioaddr1 &= PCI_BASE_ADDRESS_IO_MASK;
|
|
pci_ioaddr2 &= PCI_BASE_ADDRESS_IO_MASK;
|
|
pci_ioaddr3 &= PCI_BASE_ADDRESS_IO_MASK;
|
|
pci_ioaddr4 &= PCI_BASE_ADDRESS_IO_MASK;
|
|
pci_ioaddr5 &= PCI_BASE_ADDRESS_IO_MASK;
|
|
/* Take over */
|
|
cs->irq = pci_irq;
|
|
cs->irq_flags |= IRQF_SHARED;
|
|
/* pci_ioaddr1 is unique to all subdevices */
|
|
/* pci_ioaddr2 is for the fourth subdevice only */
|
|
/* pci_ioaddr3 is for the third subdevice only */
|
|
/* pci_ioaddr4 is for the second subdevice only */
|
|
/* pci_ioaddr5 is for the first subdevice only */
|
|
cs->hw.ax.plx_adr = pci_ioaddr1;
|
|
/* Enter all ipac_base addresses */
|
|
switch(cs->subtyp) {
|
|
case 1:
|
|
cs->hw.ax.base = pci_ioaddr5 + 0x00;
|
|
if (sct_alloc_io(pci_ioaddr1, 128))
|
|
return(0);
|
|
if (sct_alloc_io(pci_ioaddr5, 64))
|
|
return(0);
|
|
/* disable all IPAC */
|
|
writereg(pci_ioaddr5, pci_ioaddr5 + 4,
|
|
IPAC_MASK, 0xFF);
|
|
writereg(pci_ioaddr4 + 0x08, pci_ioaddr4 + 0x0c,
|
|
IPAC_MASK, 0xFF);
|
|
writereg(pci_ioaddr3 + 0x10, pci_ioaddr3 + 0x14,
|
|
IPAC_MASK, 0xFF);
|
|
writereg(pci_ioaddr2 + 0x20, pci_ioaddr2 + 0x24,
|
|
IPAC_MASK, 0xFF);
|
|
break;
|
|
case 2:
|
|
cs->hw.ax.base = pci_ioaddr4 + 0x08;
|
|
if (sct_alloc_io(pci_ioaddr4, 64))
|
|
return(0);
|
|
break;
|
|
case 3:
|
|
cs->hw.ax.base = pci_ioaddr3 + 0x10;
|
|
if (sct_alloc_io(pci_ioaddr3, 64))
|
|
return(0);
|
|
break;
|
|
case 4:
|
|
cs->hw.ax.base = pci_ioaddr2 + 0x20;
|
|
if (sct_alloc_io(pci_ioaddr2, 64))
|
|
return(0);
|
|
break;
|
|
}
|
|
/* For isac and hscx data path */
|
|
cs->hw.ax.data_adr = cs->hw.ax.base + 4;
|
|
|
|
printk(KERN_INFO "HiSax: Scitel Quadro (%s) configured at "
|
|
"0x%.4lX, 0x%.4lX, 0x%.4lX and IRQ %d\n",
|
|
sct_quadro_subtypes[cs->subtyp],
|
|
cs->hw.ax.plx_adr,
|
|
cs->hw.ax.base,
|
|
cs->hw.ax.data_adr,
|
|
cs->irq);
|
|
|
|
test_and_set_bit(HW_IPAC, &cs->HW_Flags);
|
|
|
|
cs->readisac = &ReadISAC;
|
|
cs->writeisac = &WriteISAC;
|
|
cs->readisacfifo = &ReadISACfifo;
|
|
cs->writeisacfifo = &WriteISACfifo;
|
|
|
|
cs->BC_Read_Reg = &ReadHSCX;
|
|
cs->BC_Write_Reg = &WriteHSCX;
|
|
cs->BC_Send_Data = &hscx_fill_fifo;
|
|
cs->cardmsg = &BKM_card_msg;
|
|
cs->irq_func = &bkm_interrupt_ipac;
|
|
|
|
printk(KERN_INFO "HiSax: Scitel Quadro (%s): IPAC Version %d\n",
|
|
sct_quadro_subtypes[cs->subtyp],
|
|
readreg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_ID));
|
|
return (1);
|
|
}
|