mirror of
https://github.com/torvalds/linux.git
synced 2024-11-11 14:42:24 +00:00
4954578efb
if "chip_id" is wrong or "dev->cfg.clock_out" is invalid, the i2c model is still loaded. It will cause "kernel NULL pointer dereference" oops when the i2c model remove. returning the err code will prevent the i2c model load. Signed-off-by: Nibble Max <nibble.max@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
580 lines
12 KiB
C
580 lines
12 KiB
C
/*
|
|
* Montage M88TS2022 silicon tuner driver
|
|
*
|
|
* Copyright (C) 2013 Antti Palosaari <crope@iki.fi>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* Some calculations are taken from existing TS2020 driver.
|
|
*/
|
|
|
|
#include "m88ts2022_priv.h"
|
|
|
|
static int m88ts2022_cmd(struct m88ts2022_dev *dev, int op, int sleep, u8 reg,
|
|
u8 mask, u8 val, u8 *reg_val)
|
|
{
|
|
int ret, i;
|
|
unsigned int utmp;
|
|
struct m88ts2022_reg_val reg_vals[] = {
|
|
{0x51, 0x1f - op},
|
|
{0x51, 0x1f},
|
|
{0x50, 0x00 + op},
|
|
{0x50, 0x00},
|
|
};
|
|
|
|
for (i = 0; i < 2; i++) {
|
|
dev_dbg(&dev->client->dev,
|
|
"i=%d op=%02x reg=%02x mask=%02x val=%02x\n",
|
|
i, op, reg, mask, val);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(reg_vals); i++) {
|
|
ret = regmap_write(dev->regmap, reg_vals[i].reg,
|
|
reg_vals[i].val);
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
|
|
usleep_range(sleep * 1000, sleep * 10000);
|
|
|
|
ret = regmap_read(dev->regmap, reg, &utmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
if ((utmp & mask) != val)
|
|
break;
|
|
}
|
|
|
|
if (reg_val)
|
|
*reg_val = utmp;
|
|
err:
|
|
return ret;
|
|
}
|
|
|
|
static int m88ts2022_set_params(struct dvb_frontend *fe)
|
|
{
|
|
struct m88ts2022_dev *dev = fe->tuner_priv;
|
|
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
|
|
int ret;
|
|
unsigned int utmp, frequency_khz, frequency_offset_khz, f_3db_hz;
|
|
unsigned int f_ref_khz, f_vco_khz, div_ref, div_out, pll_n, gdiv28;
|
|
u8 buf[3], u8tmp, cap_code, lpf_gm, lpf_mxdiv, div_max, div_min;
|
|
u16 u16tmp;
|
|
|
|
dev_dbg(&dev->client->dev,
|
|
"frequency=%d symbol_rate=%d rolloff=%d\n",
|
|
c->frequency, c->symbol_rate, c->rolloff);
|
|
/*
|
|
* Integer-N PLL synthesizer
|
|
* kHz is used for all calculations to keep calculations within 32-bit
|
|
*/
|
|
f_ref_khz = DIV_ROUND_CLOSEST(dev->cfg.clock, 1000);
|
|
div_ref = DIV_ROUND_CLOSEST(f_ref_khz, 2000);
|
|
|
|
if (c->symbol_rate < 5000000)
|
|
frequency_offset_khz = 3000; /* 3 MHz */
|
|
else
|
|
frequency_offset_khz = 0;
|
|
|
|
frequency_khz = c->frequency + frequency_offset_khz;
|
|
|
|
if (frequency_khz < 1103000) {
|
|
div_out = 4;
|
|
u8tmp = 0x1b;
|
|
} else {
|
|
div_out = 2;
|
|
u8tmp = 0x0b;
|
|
}
|
|
|
|
buf[0] = u8tmp;
|
|
buf[1] = 0x40;
|
|
ret = regmap_bulk_write(dev->regmap, 0x10, buf, 2);
|
|
if (ret)
|
|
goto err;
|
|
|
|
f_vco_khz = frequency_khz * div_out;
|
|
pll_n = f_vco_khz * div_ref / f_ref_khz;
|
|
pll_n += pll_n % 2;
|
|
dev->frequency_khz = pll_n * f_ref_khz / div_ref / div_out;
|
|
|
|
if (pll_n < 4095)
|
|
u16tmp = pll_n - 1024;
|
|
else if (pll_n < 6143)
|
|
u16tmp = pll_n + 1024;
|
|
else
|
|
u16tmp = pll_n + 3072;
|
|
|
|
buf[0] = (u16tmp >> 8) & 0x3f;
|
|
buf[1] = (u16tmp >> 0) & 0xff;
|
|
buf[2] = div_ref - 8;
|
|
ret = regmap_bulk_write(dev->regmap, 0x01, buf, 3);
|
|
if (ret)
|
|
goto err;
|
|
|
|
dev_dbg(&dev->client->dev,
|
|
"frequency=%u offset=%d f_vco_khz=%u pll_n=%u div_ref=%u div_out=%u\n",
|
|
dev->frequency_khz, dev->frequency_khz - c->frequency,
|
|
f_vco_khz, pll_n, div_ref, div_out);
|
|
|
|
ret = m88ts2022_cmd(dev, 0x10, 5, 0x15, 0x40, 0x00, NULL);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = regmap_read(dev->regmap, 0x14, &utmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
utmp &= 0x7f;
|
|
if (utmp < 64) {
|
|
ret = regmap_update_bits(dev->regmap, 0x10, 0x80, 0x80);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = regmap_write(dev->regmap, 0x11, 0x6f);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = m88ts2022_cmd(dev, 0x10, 5, 0x15, 0x40, 0x00, NULL);
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
|
|
ret = regmap_read(dev->regmap, 0x14, &utmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
utmp &= 0x1f;
|
|
if (utmp > 19) {
|
|
ret = regmap_update_bits(dev->regmap, 0x10, 0x02, 0x00);
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
|
|
ret = m88ts2022_cmd(dev, 0x08, 5, 0x3c, 0xff, 0x00, NULL);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = regmap_write(dev->regmap, 0x25, 0x00);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = regmap_write(dev->regmap, 0x27, 0x70);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = regmap_write(dev->regmap, 0x41, 0x09);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = regmap_write(dev->regmap, 0x08, 0x0b);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* filters */
|
|
gdiv28 = DIV_ROUND_CLOSEST(f_ref_khz * 1694U, 1000000U);
|
|
|
|
ret = regmap_write(dev->regmap, 0x04, gdiv28);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = m88ts2022_cmd(dev, 0x04, 2, 0x26, 0xff, 0x00, &u8tmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
cap_code = u8tmp & 0x3f;
|
|
|
|
ret = regmap_write(dev->regmap, 0x41, 0x0d);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = m88ts2022_cmd(dev, 0x04, 2, 0x26, 0xff, 0x00, &u8tmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
u8tmp &= 0x3f;
|
|
cap_code = (cap_code + u8tmp) / 2;
|
|
gdiv28 = gdiv28 * 207 / (cap_code * 2 + 151);
|
|
div_max = gdiv28 * 135 / 100;
|
|
div_min = gdiv28 * 78 / 100;
|
|
div_max = clamp_val(div_max, 0U, 63U);
|
|
|
|
f_3db_hz = mult_frac(c->symbol_rate, 135, 200);
|
|
f_3db_hz += 2000000U + (frequency_offset_khz * 1000U);
|
|
f_3db_hz = clamp(f_3db_hz, 7000000U, 40000000U);
|
|
|
|
#define LPF_COEFF 3200U
|
|
lpf_gm = DIV_ROUND_CLOSEST(f_3db_hz * gdiv28, LPF_COEFF * f_ref_khz);
|
|
lpf_gm = clamp_val(lpf_gm, 1U, 23U);
|
|
|
|
lpf_mxdiv = DIV_ROUND_CLOSEST(lpf_gm * LPF_COEFF * f_ref_khz, f_3db_hz);
|
|
if (lpf_mxdiv < div_min)
|
|
lpf_mxdiv = DIV_ROUND_CLOSEST(++lpf_gm * LPF_COEFF * f_ref_khz, f_3db_hz);
|
|
lpf_mxdiv = clamp_val(lpf_mxdiv, 0U, div_max);
|
|
|
|
ret = regmap_write(dev->regmap, 0x04, lpf_mxdiv);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = regmap_write(dev->regmap, 0x06, lpf_gm);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = m88ts2022_cmd(dev, 0x04, 2, 0x26, 0xff, 0x00, &u8tmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
cap_code = u8tmp & 0x3f;
|
|
|
|
ret = regmap_write(dev->regmap, 0x41, 0x09);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = m88ts2022_cmd(dev, 0x04, 2, 0x26, 0xff, 0x00, &u8tmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
u8tmp &= 0x3f;
|
|
cap_code = (cap_code + u8tmp) / 2;
|
|
|
|
u8tmp = cap_code | 0x80;
|
|
ret = regmap_write(dev->regmap, 0x25, u8tmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = regmap_write(dev->regmap, 0x27, 0x30);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = regmap_write(dev->regmap, 0x08, 0x09);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = m88ts2022_cmd(dev, 0x01, 20, 0x21, 0xff, 0x00, NULL);
|
|
if (ret)
|
|
goto err;
|
|
err:
|
|
if (ret)
|
|
dev_dbg(&dev->client->dev, "failed=%d\n", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int m88ts2022_init(struct dvb_frontend *fe)
|
|
{
|
|
struct m88ts2022_dev *dev = fe->tuner_priv;
|
|
int ret, i;
|
|
u8 u8tmp;
|
|
static const struct m88ts2022_reg_val reg_vals[] = {
|
|
{0x7d, 0x9d},
|
|
{0x7c, 0x9a},
|
|
{0x7a, 0x76},
|
|
{0x3b, 0x01},
|
|
{0x63, 0x88},
|
|
{0x61, 0x85},
|
|
{0x22, 0x30},
|
|
{0x30, 0x40},
|
|
{0x20, 0x23},
|
|
{0x24, 0x02},
|
|
{0x12, 0xa0},
|
|
};
|
|
|
|
dev_dbg(&dev->client->dev, "\n");
|
|
|
|
ret = regmap_write(dev->regmap, 0x00, 0x01);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = regmap_write(dev->regmap, 0x00, 0x03);
|
|
if (ret)
|
|
goto err;
|
|
|
|
switch (dev->cfg.clock_out) {
|
|
case M88TS2022_CLOCK_OUT_DISABLED:
|
|
u8tmp = 0x60;
|
|
break;
|
|
case M88TS2022_CLOCK_OUT_ENABLED:
|
|
u8tmp = 0x70;
|
|
ret = regmap_write(dev->regmap, 0x05, dev->cfg.clock_out_div);
|
|
if (ret)
|
|
goto err;
|
|
break;
|
|
case M88TS2022_CLOCK_OUT_ENABLED_XTALOUT:
|
|
u8tmp = 0x6c;
|
|
break;
|
|
default:
|
|
goto err;
|
|
}
|
|
|
|
ret = regmap_write(dev->regmap, 0x42, u8tmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
if (dev->cfg.loop_through)
|
|
u8tmp = 0xec;
|
|
else
|
|
u8tmp = 0x6c;
|
|
|
|
ret = regmap_write(dev->regmap, 0x62, u8tmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(reg_vals); i++) {
|
|
ret = regmap_write(dev->regmap, reg_vals[i].reg, reg_vals[i].val);
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
err:
|
|
if (ret)
|
|
dev_dbg(&dev->client->dev, "failed=%d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static int m88ts2022_sleep(struct dvb_frontend *fe)
|
|
{
|
|
struct m88ts2022_dev *dev = fe->tuner_priv;
|
|
int ret;
|
|
|
|
dev_dbg(&dev->client->dev, "\n");
|
|
|
|
ret = regmap_write(dev->regmap, 0x00, 0x00);
|
|
if (ret)
|
|
goto err;
|
|
err:
|
|
if (ret)
|
|
dev_dbg(&dev->client->dev, "failed=%d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static int m88ts2022_get_frequency(struct dvb_frontend *fe, u32 *frequency)
|
|
{
|
|
struct m88ts2022_dev *dev = fe->tuner_priv;
|
|
|
|
dev_dbg(&dev->client->dev, "\n");
|
|
|
|
*frequency = dev->frequency_khz;
|
|
return 0;
|
|
}
|
|
|
|
static int m88ts2022_get_if_frequency(struct dvb_frontend *fe, u32 *frequency)
|
|
{
|
|
struct m88ts2022_dev *dev = fe->tuner_priv;
|
|
|
|
dev_dbg(&dev->client->dev, "\n");
|
|
|
|
*frequency = 0; /* Zero-IF */
|
|
return 0;
|
|
}
|
|
|
|
static int m88ts2022_get_rf_strength(struct dvb_frontend *fe, u16 *strength)
|
|
{
|
|
struct m88ts2022_dev *dev = fe->tuner_priv;
|
|
int ret;
|
|
u16 gain, u16tmp;
|
|
unsigned int utmp, gain1, gain2, gain3;
|
|
|
|
ret = regmap_read(dev->regmap, 0x3d, &utmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
gain1 = (utmp >> 0) & 0x1f;
|
|
gain1 = clamp(gain1, 0U, 15U);
|
|
|
|
ret = regmap_read(dev->regmap, 0x21, &utmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
gain2 = (utmp >> 0) & 0x1f;
|
|
gain2 = clamp(gain2, 2U, 16U);
|
|
|
|
ret = regmap_read(dev->regmap, 0x66, &utmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
gain3 = (utmp >> 3) & 0x07;
|
|
gain3 = clamp(gain3, 0U, 6U);
|
|
|
|
gain = gain1 * 265 + gain2 * 338 + gain3 * 285;
|
|
|
|
/* scale value to 0x0000-0xffff */
|
|
u16tmp = (0xffff - gain);
|
|
u16tmp = clamp_val(u16tmp, 59000U, 61500U);
|
|
|
|
*strength = (u16tmp - 59000) * 0xffff / (61500 - 59000);
|
|
err:
|
|
if (ret)
|
|
dev_dbg(&dev->client->dev, "failed=%d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static const struct dvb_tuner_ops m88ts2022_tuner_ops = {
|
|
.info = {
|
|
.name = "Montage M88TS2022",
|
|
.frequency_min = 950000,
|
|
.frequency_max = 2150000,
|
|
},
|
|
|
|
.init = m88ts2022_init,
|
|
.sleep = m88ts2022_sleep,
|
|
.set_params = m88ts2022_set_params,
|
|
|
|
.get_frequency = m88ts2022_get_frequency,
|
|
.get_if_frequency = m88ts2022_get_if_frequency,
|
|
.get_rf_strength = m88ts2022_get_rf_strength,
|
|
};
|
|
|
|
static int m88ts2022_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct m88ts2022_config *cfg = client->dev.platform_data;
|
|
struct dvb_frontend *fe = cfg->fe;
|
|
struct m88ts2022_dev *dev;
|
|
int ret;
|
|
u8 u8tmp;
|
|
unsigned int utmp;
|
|
static const struct regmap_config regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
};
|
|
|
|
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
|
|
if (!dev) {
|
|
ret = -ENOMEM;
|
|
dev_err(&client->dev, "kzalloc() failed\n");
|
|
goto err;
|
|
}
|
|
|
|
memcpy(&dev->cfg, cfg, sizeof(struct m88ts2022_config));
|
|
dev->client = client;
|
|
dev->regmap = devm_regmap_init_i2c(client, ®map_config);
|
|
if (IS_ERR(dev->regmap)) {
|
|
ret = PTR_ERR(dev->regmap);
|
|
goto err;
|
|
}
|
|
|
|
/* check if the tuner is there */
|
|
ret = regmap_read(dev->regmap, 0x00, &utmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
if ((utmp & 0x03) == 0x00) {
|
|
ret = regmap_write(dev->regmap, 0x00, 0x01);
|
|
if (ret)
|
|
goto err;
|
|
|
|
usleep_range(2000, 50000);
|
|
}
|
|
|
|
ret = regmap_write(dev->regmap, 0x00, 0x03);
|
|
if (ret)
|
|
goto err;
|
|
|
|
usleep_range(2000, 50000);
|
|
|
|
ret = regmap_read(dev->regmap, 0x00, &utmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
dev_dbg(&dev->client->dev, "chip_id=%02x\n", utmp);
|
|
|
|
switch (utmp) {
|
|
case 0xc3:
|
|
case 0x83:
|
|
break;
|
|
default:
|
|
ret = -ENODEV;
|
|
goto err;
|
|
}
|
|
|
|
switch (dev->cfg.clock_out) {
|
|
case M88TS2022_CLOCK_OUT_DISABLED:
|
|
u8tmp = 0x60;
|
|
break;
|
|
case M88TS2022_CLOCK_OUT_ENABLED:
|
|
u8tmp = 0x70;
|
|
ret = regmap_write(dev->regmap, 0x05, dev->cfg.clock_out_div);
|
|
if (ret)
|
|
goto err;
|
|
break;
|
|
case M88TS2022_CLOCK_OUT_ENABLED_XTALOUT:
|
|
u8tmp = 0x6c;
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
|
|
ret = regmap_write(dev->regmap, 0x42, u8tmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
if (dev->cfg.loop_through)
|
|
u8tmp = 0xec;
|
|
else
|
|
u8tmp = 0x6c;
|
|
|
|
ret = regmap_write(dev->regmap, 0x62, u8tmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* sleep */
|
|
ret = regmap_write(dev->regmap, 0x00, 0x00);
|
|
if (ret)
|
|
goto err;
|
|
|
|
dev_info(&dev->client->dev, "Montage M88TS2022 successfully identified\n");
|
|
|
|
fe->tuner_priv = dev;
|
|
memcpy(&fe->ops.tuner_ops, &m88ts2022_tuner_ops,
|
|
sizeof(struct dvb_tuner_ops));
|
|
|
|
i2c_set_clientdata(client, dev);
|
|
return 0;
|
|
err:
|
|
dev_dbg(&client->dev, "failed=%d\n", ret);
|
|
kfree(dev);
|
|
return ret;
|
|
}
|
|
|
|
static int m88ts2022_remove(struct i2c_client *client)
|
|
{
|
|
struct m88ts2022_dev *dev = i2c_get_clientdata(client);
|
|
struct dvb_frontend *fe = dev->cfg.fe;
|
|
|
|
dev_dbg(&client->dev, "\n");
|
|
|
|
memset(&fe->ops.tuner_ops, 0, sizeof(struct dvb_tuner_ops));
|
|
fe->tuner_priv = NULL;
|
|
kfree(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id m88ts2022_id[] = {
|
|
{"m88ts2022", 0},
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, m88ts2022_id);
|
|
|
|
static struct i2c_driver m88ts2022_driver = {
|
|
.driver = {
|
|
.owner = THIS_MODULE,
|
|
.name = "m88ts2022",
|
|
},
|
|
.probe = m88ts2022_probe,
|
|
.remove = m88ts2022_remove,
|
|
.id_table = m88ts2022_id,
|
|
};
|
|
|
|
module_i2c_driver(m88ts2022_driver);
|
|
|
|
MODULE_DESCRIPTION("Montage M88TS2022 silicon tuner driver");
|
|
MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
|
|
MODULE_LICENSE("GPL");
|