mirror of
https://github.com/torvalds/linux.git
synced 2024-11-16 09:02:00 +00:00
61a091827e
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (97 commits) USB: qcserial: add device id for HP devices USB: isp1760: Add a delay before reading the SKIPMAP registers in isp1760-hcd.c USB: allow malformed LANGID descriptors USB: pxa27x_udc: typo fixes and code cleanups USB: gadget: gadget zero uses new suspend/resume hooks USB: gadget: composite device-level suspend/resume hooks USB: r8a66597-hcd: suspend/resume support USB: more u32 conversion after transfer_buffer_length and actual_length USB: Fix cp2101 USB serial device driver termios functions for console use USB: CP2101 New Device ID USB: ipaq: handle 4 endpoint devices USB: S3C: Move usb-control.h to platform include USB: ohci-hcd: Add ARCH_S3C24XX to the ohci-s3c2410.c glue USB: pedantic: spelling correction in comment for ch9.h USB: host: fix sparse warning: Using plain integer as NULL pointer USB: ohci-s3c2410: fix name of bus clock USB: ohci-s3c2410: remove <mach/hardware.h> include USB: serial: rename cp2101 driver to cp210x USB: CP2101 Reduce Error Logging USB: CP2101 Support AN205 baud rates ...
1569 lines
37 KiB
C
1569 lines
37 KiB
C
/*
|
|
* driver/usb/gadget/imx_udc.c
|
|
*
|
|
* Copyright (C) 2005 Mike Lee <eemike@gmail.com>
|
|
* Copyright (C) 2008 Darius Augulis <augulis.darius@gmail.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/module.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/list.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/device.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/timer.h>
|
|
|
|
#include <linux/usb/ch9.h>
|
|
#include <linux/usb/gadget.h>
|
|
|
|
#include <mach/usb.h>
|
|
#include <mach/hardware.h>
|
|
|
|
#include "imx_udc.h"
|
|
|
|
static const char driver_name[] = "imx_udc";
|
|
static const char ep0name[] = "ep0";
|
|
|
|
void ep0_chg_stat(const char *label, struct imx_udc_struct *imx_usb,
|
|
enum ep0_state stat);
|
|
|
|
/*******************************************************************************
|
|
* IMX UDC hardware related functions
|
|
*******************************************************************************
|
|
*/
|
|
|
|
void imx_udc_enable(struct imx_udc_struct *imx_usb)
|
|
{
|
|
int temp = __raw_readl(imx_usb->base + USB_CTRL);
|
|
__raw_writel(temp | CTRL_FE_ENA | CTRL_AFE_ENA,
|
|
imx_usb->base + USB_CTRL);
|
|
imx_usb->gadget.speed = USB_SPEED_FULL;
|
|
}
|
|
|
|
void imx_udc_disable(struct imx_udc_struct *imx_usb)
|
|
{
|
|
int temp = __raw_readl(imx_usb->base + USB_CTRL);
|
|
|
|
__raw_writel(temp & ~(CTRL_FE_ENA | CTRL_AFE_ENA),
|
|
imx_usb->base + USB_CTRL);
|
|
|
|
ep0_chg_stat(__func__, imx_usb, EP0_IDLE);
|
|
imx_usb->gadget.speed = USB_SPEED_UNKNOWN;
|
|
}
|
|
|
|
void imx_udc_reset(struct imx_udc_struct *imx_usb)
|
|
{
|
|
int temp = __raw_readl(imx_usb->base + USB_ENAB);
|
|
|
|
/* set RST bit */
|
|
__raw_writel(temp | ENAB_RST, imx_usb->base + USB_ENAB);
|
|
|
|
/* wait RST bit to clear */
|
|
do {} while (__raw_readl(imx_usb->base + USB_ENAB) & ENAB_RST);
|
|
|
|
/* wait CFG bit to assert */
|
|
do {} while (!(__raw_readl(imx_usb->base + USB_DADR) & DADR_CFG));
|
|
|
|
/* udc module is now ready */
|
|
}
|
|
|
|
void imx_udc_config(struct imx_udc_struct *imx_usb)
|
|
{
|
|
u8 ep_conf[5];
|
|
u8 i, j, cfg;
|
|
struct imx_ep_struct *imx_ep;
|
|
|
|
/* wait CFG bit to assert */
|
|
do {} while (!(__raw_readl(imx_usb->base + USB_DADR) & DADR_CFG));
|
|
|
|
/* Download the endpoint buffer for endpoint 0. */
|
|
for (j = 0; j < 5; j++) {
|
|
i = (j == 2 ? imx_usb->imx_ep[0].fifosize : 0x00);
|
|
__raw_writeb(i, imx_usb->base + USB_DDAT);
|
|
do {} while (__raw_readl(imx_usb->base + USB_DADR) & DADR_BSY);
|
|
}
|
|
|
|
/* Download the endpoint buffers for endpoints 1-5.
|
|
* We specify two configurations, one interface
|
|
*/
|
|
for (cfg = 1; cfg < 3; cfg++) {
|
|
for (i = 1; i < IMX_USB_NB_EP; i++) {
|
|
imx_ep = &imx_usb->imx_ep[i];
|
|
/* EP no | Config no */
|
|
ep_conf[0] = (i << 4) | (cfg << 2);
|
|
/* Type | Direction */
|
|
ep_conf[1] = (imx_ep->bmAttributes << 3) |
|
|
(EP_DIR(imx_ep) << 2);
|
|
/* Max packet size */
|
|
ep_conf[2] = imx_ep->fifosize;
|
|
/* TRXTYP */
|
|
ep_conf[3] = 0xC0;
|
|
/* FIFO no */
|
|
ep_conf[4] = i;
|
|
|
|
D_INI(imx_usb->dev,
|
|
"<%s> ep%d_conf[%d]:"
|
|
"[%02x-%02x-%02x-%02x-%02x]\n",
|
|
__func__, i, cfg,
|
|
ep_conf[0], ep_conf[1], ep_conf[2],
|
|
ep_conf[3], ep_conf[4]);
|
|
|
|
for (j = 0; j < 5; j++) {
|
|
__raw_writeb(ep_conf[j],
|
|
imx_usb->base + USB_DDAT);
|
|
do {} while (__raw_readl(imx_usb->base
|
|
+ USB_DADR)
|
|
& DADR_BSY);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* wait CFG bit to clear */
|
|
do {} while (__raw_readl(imx_usb->base + USB_DADR) & DADR_CFG);
|
|
}
|
|
|
|
void imx_udc_init_irq(struct imx_udc_struct *imx_usb)
|
|
{
|
|
int i;
|
|
|
|
/* Mask and clear all irqs */
|
|
__raw_writel(0xFFFFFFFF, imx_usb->base + USB_MASK);
|
|
__raw_writel(0xFFFFFFFF, imx_usb->base + USB_INTR);
|
|
for (i = 0; i < IMX_USB_NB_EP; i++) {
|
|
__raw_writel(0x1FF, imx_usb->base + USB_EP_MASK(i));
|
|
__raw_writel(0x1FF, imx_usb->base + USB_EP_INTR(i));
|
|
}
|
|
|
|
/* Enable USB irqs */
|
|
__raw_writel(INTR_MSOF | INTR_FRAME_MATCH, imx_usb->base + USB_MASK);
|
|
|
|
/* Enable EP0 irqs */
|
|
__raw_writel(0x1FF & ~(EPINTR_DEVREQ | EPINTR_MDEVREQ | EPINTR_EOT
|
|
| EPINTR_EOF | EPINTR_FIFO_EMPTY | EPINTR_FIFO_FULL),
|
|
imx_usb->base + USB_EP_MASK(0));
|
|
}
|
|
|
|
void imx_udc_init_ep(struct imx_udc_struct *imx_usb)
|
|
{
|
|
int i, max, temp;
|
|
struct imx_ep_struct *imx_ep;
|
|
for (i = 0; i < IMX_USB_NB_EP; i++) {
|
|
imx_ep = &imx_usb->imx_ep[i];
|
|
switch (imx_ep->fifosize) {
|
|
case 8:
|
|
max = 0;
|
|
break;
|
|
case 16:
|
|
max = 1;
|
|
break;
|
|
case 32:
|
|
max = 2;
|
|
break;
|
|
case 64:
|
|
max = 3;
|
|
break;
|
|
default:
|
|
max = 1;
|
|
break;
|
|
}
|
|
temp = (EP_DIR(imx_ep) << 7) | (max << 5)
|
|
| (imx_ep->bmAttributes << 3);
|
|
__raw_writel(temp, imx_usb->base + USB_EP_STAT(i));
|
|
__raw_writel(temp | EPSTAT_FLUSH,
|
|
imx_usb->base + USB_EP_STAT(i));
|
|
D_INI(imx_usb->dev, "<%s> ep%d_stat %08x\n", __func__, i,
|
|
__raw_readl(imx_usb->base + USB_EP_STAT(i)));
|
|
}
|
|
}
|
|
|
|
void imx_udc_init_fifo(struct imx_udc_struct *imx_usb)
|
|
{
|
|
int i, temp;
|
|
struct imx_ep_struct *imx_ep;
|
|
for (i = 0; i < IMX_USB_NB_EP; i++) {
|
|
imx_ep = &imx_usb->imx_ep[i];
|
|
|
|
/* Fifo control */
|
|
temp = EP_DIR(imx_ep) ? 0x0B000000 : 0x0F000000;
|
|
__raw_writel(temp, imx_usb->base + USB_EP_FCTRL(i));
|
|
D_INI(imx_usb->dev, "<%s> ep%d_fctrl %08x\n", __func__, i,
|
|
__raw_readl(imx_usb->base + USB_EP_FCTRL(i)));
|
|
|
|
/* Fifo alarm */
|
|
temp = (i ? imx_ep->fifosize / 2 : 0);
|
|
__raw_writel(temp, imx_usb->base + USB_EP_FALRM(i));
|
|
D_INI(imx_usb->dev, "<%s> ep%d_falrm %08x\n", __func__, i,
|
|
__raw_readl(imx_usb->base + USB_EP_FALRM(i)));
|
|
}
|
|
}
|
|
|
|
static void imx_udc_init(struct imx_udc_struct *imx_usb)
|
|
{
|
|
/* Reset UDC */
|
|
imx_udc_reset(imx_usb);
|
|
|
|
/* Download config to enpoint buffer */
|
|
imx_udc_config(imx_usb);
|
|
|
|
/* Setup interrups */
|
|
imx_udc_init_irq(imx_usb);
|
|
|
|
/* Setup endpoints */
|
|
imx_udc_init_ep(imx_usb);
|
|
|
|
/* Setup fifos */
|
|
imx_udc_init_fifo(imx_usb);
|
|
}
|
|
|
|
void imx_ep_irq_enable(struct imx_ep_struct *imx_ep)
|
|
{
|
|
|
|
int i = EP_NO(imx_ep);
|
|
|
|
__raw_writel(0x1FF, imx_ep->imx_usb->base + USB_EP_MASK(i));
|
|
__raw_writel(0x1FF, imx_ep->imx_usb->base + USB_EP_INTR(i));
|
|
__raw_writel(0x1FF & ~(EPINTR_EOT | EPINTR_EOF),
|
|
imx_ep->imx_usb->base + USB_EP_MASK(i));
|
|
}
|
|
|
|
void imx_ep_irq_disable(struct imx_ep_struct *imx_ep)
|
|
{
|
|
|
|
int i = EP_NO(imx_ep);
|
|
|
|
__raw_writel(0x1FF, imx_ep->imx_usb->base + USB_EP_MASK(i));
|
|
__raw_writel(0x1FF, imx_ep->imx_usb->base + USB_EP_INTR(i));
|
|
}
|
|
|
|
int imx_ep_empty(struct imx_ep_struct *imx_ep)
|
|
{
|
|
struct imx_udc_struct *imx_usb = imx_ep->imx_usb;
|
|
|
|
return __raw_readl(imx_usb->base + USB_EP_FSTAT(EP_NO(imx_ep)))
|
|
& FSTAT_EMPTY;
|
|
}
|
|
|
|
unsigned imx_fifo_bcount(struct imx_ep_struct *imx_ep)
|
|
{
|
|
struct imx_udc_struct *imx_usb = imx_ep->imx_usb;
|
|
|
|
return (__raw_readl(imx_usb->base + USB_EP_STAT(EP_NO(imx_ep)))
|
|
& EPSTAT_BCOUNT) >> 16;
|
|
}
|
|
|
|
void imx_flush(struct imx_ep_struct *imx_ep)
|
|
{
|
|
struct imx_udc_struct *imx_usb = imx_ep->imx_usb;
|
|
|
|
int temp = __raw_readl(imx_usb->base + USB_EP_STAT(EP_NO(imx_ep)));
|
|
__raw_writel(temp | EPSTAT_FLUSH,
|
|
imx_usb->base + USB_EP_STAT(EP_NO(imx_ep)));
|
|
}
|
|
|
|
void imx_ep_stall(struct imx_ep_struct *imx_ep)
|
|
{
|
|
struct imx_udc_struct *imx_usb = imx_ep->imx_usb;
|
|
int temp, i;
|
|
|
|
D_ERR(imx_usb->dev,
|
|
"<%s> Forced stall on %s\n", __func__, imx_ep->ep.name);
|
|
|
|
imx_flush(imx_ep);
|
|
|
|
/* Special care for ep0 */
|
|
if (!EP_NO(imx_ep)) {
|
|
temp = __raw_readl(imx_usb->base + USB_CTRL);
|
|
__raw_writel(temp | CTRL_CMDOVER | CTRL_CMDERROR,
|
|
imx_usb->base + USB_CTRL);
|
|
do { } while (__raw_readl(imx_usb->base + USB_CTRL)
|
|
& CTRL_CMDOVER);
|
|
temp = __raw_readl(imx_usb->base + USB_CTRL);
|
|
__raw_writel(temp & ~CTRL_CMDERROR, imx_usb->base + USB_CTRL);
|
|
}
|
|
else {
|
|
temp = __raw_readl(imx_usb->base + USB_EP_STAT(EP_NO(imx_ep)));
|
|
__raw_writel(temp | EPSTAT_STALL,
|
|
imx_usb->base + USB_EP_STAT(EP_NO(imx_ep)));
|
|
|
|
for (i = 0; i < 100; i ++) {
|
|
temp = __raw_readl(imx_usb->base
|
|
+ USB_EP_STAT(EP_NO(imx_ep)));
|
|
if (!(temp & EPSTAT_STALL))
|
|
break;
|
|
udelay(20);
|
|
}
|
|
if (i == 100)
|
|
D_ERR(imx_usb->dev, "<%s> Non finished stall on %s\n",
|
|
__func__, imx_ep->ep.name);
|
|
}
|
|
}
|
|
|
|
static int imx_udc_get_frame(struct usb_gadget *_gadget)
|
|
{
|
|
struct imx_udc_struct *imx_usb = container_of(_gadget,
|
|
struct imx_udc_struct, gadget);
|
|
|
|
return __raw_readl(imx_usb->base + USB_FRAME) & 0x7FF;
|
|
}
|
|
|
|
static int imx_udc_wakeup(struct usb_gadget *_gadget)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
/*******************************************************************************
|
|
* USB request control functions
|
|
*******************************************************************************
|
|
*/
|
|
|
|
static void ep_add_request(struct imx_ep_struct *imx_ep,
|
|
struct imx_request *req)
|
|
{
|
|
if (unlikely(!req))
|
|
return;
|
|
|
|
req->in_use = 1;
|
|
list_add_tail(&req->queue, &imx_ep->queue);
|
|
}
|
|
|
|
static void ep_del_request(struct imx_ep_struct *imx_ep,
|
|
struct imx_request *req)
|
|
{
|
|
if (unlikely(!req))
|
|
return;
|
|
|
|
list_del_init(&req->queue);
|
|
req->in_use = 0;
|
|
}
|
|
|
|
static void done(struct imx_ep_struct *imx_ep,
|
|
struct imx_request *req, int status)
|
|
{
|
|
ep_del_request(imx_ep, req);
|
|
|
|
if (likely(req->req.status == -EINPROGRESS))
|
|
req->req.status = status;
|
|
else
|
|
status = req->req.status;
|
|
|
|
if (status && status != -ESHUTDOWN)
|
|
D_ERR(imx_ep->imx_usb->dev,
|
|
"<%s> complete %s req %p stat %d len %u/%u\n", __func__,
|
|
imx_ep->ep.name, &req->req, status,
|
|
req->req.actual, req->req.length);
|
|
|
|
req->req.complete(&imx_ep->ep, &req->req);
|
|
}
|
|
|
|
static void nuke(struct imx_ep_struct *imx_ep, int status)
|
|
{
|
|
struct imx_request *req;
|
|
|
|
while (!list_empty(&imx_ep->queue)) {
|
|
req = list_entry(imx_ep->queue.next, struct imx_request, queue);
|
|
done(imx_ep, req, status);
|
|
}
|
|
}
|
|
|
|
/*******************************************************************************
|
|
* Data tansfer over USB functions
|
|
*******************************************************************************
|
|
*/
|
|
static int read_packet(struct imx_ep_struct *imx_ep, struct imx_request *req)
|
|
{
|
|
u8 *buf;
|
|
int bytes_ep, bufferspace, count, i;
|
|
|
|
bytes_ep = imx_fifo_bcount(imx_ep);
|
|
bufferspace = req->req.length - req->req.actual;
|
|
|
|
buf = req->req.buf + req->req.actual;
|
|
prefetchw(buf);
|
|
|
|
if (unlikely(imx_ep_empty(imx_ep)))
|
|
count = 0; /* zlp */
|
|
else
|
|
count = min(bytes_ep, bufferspace);
|
|
|
|
for (i = count; i > 0; i--)
|
|
*buf++ = __raw_readb(imx_ep->imx_usb->base
|
|
+ USB_EP_FDAT0(EP_NO(imx_ep)));
|
|
req->req.actual += count;
|
|
|
|
return count;
|
|
}
|
|
|
|
static int write_packet(struct imx_ep_struct *imx_ep, struct imx_request *req)
|
|
{
|
|
u8 *buf;
|
|
int length, count, temp;
|
|
|
|
buf = req->req.buf + req->req.actual;
|
|
prefetch(buf);
|
|
|
|
length = min(req->req.length - req->req.actual, (u32)imx_ep->fifosize);
|
|
|
|
if (imx_fifo_bcount(imx_ep) + length > imx_ep->fifosize) {
|
|
D_TRX(imx_ep->imx_usb->dev, "<%s> packet overfill %s fifo\n",
|
|
__func__, imx_ep->ep.name);
|
|
return -1;
|
|
}
|
|
|
|
req->req.actual += length;
|
|
count = length;
|
|
|
|
if (!count && req->req.zero) { /* zlp */
|
|
temp = __raw_readl(imx_ep->imx_usb->base
|
|
+ USB_EP_STAT(EP_NO(imx_ep)));
|
|
__raw_writel(temp | EPSTAT_ZLPS, imx_ep->imx_usb->base
|
|
+ USB_EP_STAT(EP_NO(imx_ep)));
|
|
D_TRX(imx_ep->imx_usb->dev, "<%s> zero packet\n", __func__);
|
|
return 0;
|
|
}
|
|
|
|
while (count--) {
|
|
if (count == 0) { /* last byte */
|
|
temp = __raw_readl(imx_ep->imx_usb->base
|
|
+ USB_EP_FCTRL(EP_NO(imx_ep)));
|
|
__raw_writel(temp | FCTRL_WFR, imx_ep->imx_usb->base
|
|
+ USB_EP_FCTRL(EP_NO(imx_ep)));
|
|
}
|
|
__raw_writeb(*buf++,
|
|
imx_ep->imx_usb->base + USB_EP_FDAT0(EP_NO(imx_ep)));
|
|
}
|
|
|
|
return length;
|
|
}
|
|
|
|
static int read_fifo(struct imx_ep_struct *imx_ep, struct imx_request *req)
|
|
{
|
|
int bytes = 0,
|
|
count,
|
|
completed = 0;
|
|
|
|
while (__raw_readl(imx_ep->imx_usb->base + USB_EP_FSTAT(EP_NO(imx_ep)))
|
|
& FSTAT_FR) {
|
|
count = read_packet(imx_ep, req);
|
|
bytes += count;
|
|
|
|
completed = (count != imx_ep->fifosize);
|
|
if (completed || req->req.actual == req->req.length) {
|
|
completed = 1;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (completed || !req->req.length) {
|
|
done(imx_ep, req, 0);
|
|
D_REQ(imx_ep->imx_usb->dev, "<%s> %s req<%p> %s\n",
|
|
__func__, imx_ep->ep.name, req,
|
|
completed ? "completed" : "not completed");
|
|
if (!EP_NO(imx_ep))
|
|
ep0_chg_stat(__func__, imx_ep->imx_usb, EP0_IDLE);
|
|
}
|
|
|
|
D_TRX(imx_ep->imx_usb->dev, "<%s> bytes read: %d\n", __func__, bytes);
|
|
|
|
return completed;
|
|
}
|
|
|
|
static int write_fifo(struct imx_ep_struct *imx_ep, struct imx_request *req)
|
|
{
|
|
int bytes = 0,
|
|
count,
|
|
completed = 0;
|
|
|
|
while (!completed) {
|
|
count = write_packet(imx_ep, req);
|
|
if (count < 0)
|
|
break; /* busy */
|
|
bytes += count;
|
|
|
|
/* last packet "must be" short (or a zlp) */
|
|
completed = (count != imx_ep->fifosize);
|
|
|
|
if (unlikely(completed)) {
|
|
done(imx_ep, req, 0);
|
|
D_REQ(imx_ep->imx_usb->dev, "<%s> %s req<%p> %s\n",
|
|
__func__, imx_ep->ep.name, req,
|
|
completed ? "completed" : "not completed");
|
|
if (!EP_NO(imx_ep))
|
|
ep0_chg_stat(__func__,
|
|
imx_ep->imx_usb, EP0_IDLE);
|
|
}
|
|
}
|
|
|
|
D_TRX(imx_ep->imx_usb->dev, "<%s> bytes sent: %d\n", __func__, bytes);
|
|
|
|
return completed;
|
|
}
|
|
|
|
/*******************************************************************************
|
|
* Endpoint handlers
|
|
*******************************************************************************
|
|
*/
|
|
static int handle_ep(struct imx_ep_struct *imx_ep)
|
|
{
|
|
struct imx_request *req;
|
|
int completed = 0;
|
|
|
|
do {
|
|
if (!list_empty(&imx_ep->queue))
|
|
req = list_entry(imx_ep->queue.next,
|
|
struct imx_request, queue);
|
|
else {
|
|
D_REQ(imx_ep->imx_usb->dev, "<%s> no request on %s\n",
|
|
__func__, imx_ep->ep.name);
|
|
return 0;
|
|
}
|
|
|
|
if (EP_DIR(imx_ep)) /* to host */
|
|
completed = write_fifo(imx_ep, req);
|
|
else /* to device */
|
|
completed = read_fifo(imx_ep, req);
|
|
|
|
dump_ep_stat(__func__, imx_ep);
|
|
|
|
} while (completed);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int handle_ep0(struct imx_ep_struct *imx_ep)
|
|
{
|
|
struct imx_request *req = NULL;
|
|
int ret = 0;
|
|
|
|
if (!list_empty(&imx_ep->queue)) {
|
|
req = list_entry(imx_ep->queue.next, struct imx_request, queue);
|
|
|
|
switch (imx_ep->imx_usb->ep0state) {
|
|
|
|
case EP0_IN_DATA_PHASE: /* GET_DESCRIPTOR */
|
|
write_fifo(imx_ep, req);
|
|
break;
|
|
case EP0_OUT_DATA_PHASE: /* SET_DESCRIPTOR */
|
|
read_fifo(imx_ep, req);
|
|
break;
|
|
default:
|
|
D_EP0(imx_ep->imx_usb->dev,
|
|
"<%s> ep0 i/o, odd state %d\n",
|
|
__func__, imx_ep->imx_usb->ep0state);
|
|
ep_del_request(imx_ep, req);
|
|
ret = -EL2HLT;
|
|
break;
|
|
}
|
|
}
|
|
|
|
else
|
|
D_ERR(imx_ep->imx_usb->dev, "<%s> no request on %s\n",
|
|
__func__, imx_ep->ep.name);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void handle_ep0_devreq(struct imx_udc_struct *imx_usb)
|
|
{
|
|
struct imx_ep_struct *imx_ep = &imx_usb->imx_ep[0];
|
|
union {
|
|
struct usb_ctrlrequest r;
|
|
u8 raw[8];
|
|
u32 word[2];
|
|
} u;
|
|
int temp, i;
|
|
|
|
nuke(imx_ep, -EPROTO);
|
|
|
|
/* read SETUP packet */
|
|
for (i = 0; i < 2; i++) {
|
|
if (imx_ep_empty(imx_ep)) {
|
|
D_ERR(imx_usb->dev,
|
|
"<%s> no setup packet received\n", __func__);
|
|
goto stall;
|
|
}
|
|
u.word[i] = __raw_readl(imx_usb->base
|
|
+ USB_EP_FDAT(EP_NO(imx_ep)));
|
|
}
|
|
|
|
temp = imx_ep_empty(imx_ep);
|
|
while (!imx_ep_empty(imx_ep)) {
|
|
i = __raw_readl(imx_usb->base + USB_EP_FDAT(EP_NO(imx_ep)));
|
|
D_ERR(imx_usb->dev,
|
|
"<%s> wrong to have extra bytes for setup : 0x%08x\n",
|
|
__func__, i);
|
|
}
|
|
if (!temp)
|
|
goto stall;
|
|
|
|
le16_to_cpus(&u.r.wValue);
|
|
le16_to_cpus(&u.r.wIndex);
|
|
le16_to_cpus(&u.r.wLength);
|
|
|
|
D_REQ(imx_usb->dev, "<%s> SETUP %02x.%02x v%04x i%04x l%04x\n",
|
|
__func__, u.r.bRequestType, u.r.bRequest,
|
|
u.r.wValue, u.r.wIndex, u.r.wLength);
|
|
|
|
if (imx_usb->set_config) {
|
|
/* NACK the host by using CMDOVER */
|
|
temp = __raw_readl(imx_usb->base + USB_CTRL);
|
|
__raw_writel(temp | CTRL_CMDOVER, imx_usb->base + USB_CTRL);
|
|
|
|
D_ERR(imx_usb->dev,
|
|
"<%s> set config req is pending, NACK the host\n",
|
|
__func__);
|
|
return;
|
|
}
|
|
|
|
if (u.r.bRequestType & USB_DIR_IN)
|
|
ep0_chg_stat(__func__, imx_usb, EP0_IN_DATA_PHASE);
|
|
else
|
|
ep0_chg_stat(__func__, imx_usb, EP0_OUT_DATA_PHASE);
|
|
|
|
i = imx_usb->driver->setup(&imx_usb->gadget, &u.r);
|
|
if (i < 0) {
|
|
D_ERR(imx_usb->dev, "<%s> device setup error %d\n",
|
|
__func__, i);
|
|
goto stall;
|
|
}
|
|
|
|
return;
|
|
stall:
|
|
D_ERR(imx_usb->dev, "<%s> protocol STALL\n", __func__);
|
|
imx_ep_stall(imx_ep);
|
|
ep0_chg_stat(__func__, imx_usb, EP0_STALL);
|
|
return;
|
|
}
|
|
|
|
/*******************************************************************************
|
|
* USB gadget callback functions
|
|
*******************************************************************************
|
|
*/
|
|
|
|
static int imx_ep_enable(struct usb_ep *usb_ep,
|
|
const struct usb_endpoint_descriptor *desc)
|
|
{
|
|
struct imx_ep_struct *imx_ep = container_of(usb_ep,
|
|
struct imx_ep_struct, ep);
|
|
struct imx_udc_struct *imx_usb = imx_ep->imx_usb;
|
|
unsigned long flags;
|
|
|
|
if (!usb_ep
|
|
|| !desc
|
|
|| !EP_NO(imx_ep)
|
|
|| desc->bDescriptorType != USB_DT_ENDPOINT
|
|
|| imx_ep->bEndpointAddress != desc->bEndpointAddress) {
|
|
D_ERR(imx_usb->dev,
|
|
"<%s> bad ep or descriptor\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (imx_ep->bmAttributes != desc->bmAttributes) {
|
|
D_ERR(imx_usb->dev,
|
|
"<%s> %s type mismatch\n", __func__, usb_ep->name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (imx_ep->fifosize < le16_to_cpu(desc->wMaxPacketSize)) {
|
|
D_ERR(imx_usb->dev,
|
|
"<%s> bad %s maxpacket\n", __func__, usb_ep->name);
|
|
return -ERANGE;
|
|
}
|
|
|
|
if (!imx_usb->driver || imx_usb->gadget.speed == USB_SPEED_UNKNOWN) {
|
|
D_ERR(imx_usb->dev, "<%s> bogus device state\n", __func__);
|
|
return -ESHUTDOWN;
|
|
}
|
|
|
|
local_irq_save(flags);
|
|
|
|
imx_ep->stopped = 0;
|
|
imx_flush(imx_ep);
|
|
imx_ep_irq_enable(imx_ep);
|
|
|
|
local_irq_restore(flags);
|
|
|
|
D_EPX(imx_usb->dev, "<%s> ENABLED %s\n", __func__, usb_ep->name);
|
|
return 0;
|
|
}
|
|
|
|
static int imx_ep_disable(struct usb_ep *usb_ep)
|
|
{
|
|
struct imx_ep_struct *imx_ep = container_of(usb_ep,
|
|
struct imx_ep_struct, ep);
|
|
unsigned long flags;
|
|
|
|
if (!usb_ep || !EP_NO(imx_ep) || !list_empty(&imx_ep->queue)) {
|
|
D_ERR(imx_ep->imx_usb->dev, "<%s> %s can not be disabled\n",
|
|
__func__, usb_ep ? imx_ep->ep.name : NULL);
|
|
return -EINVAL;
|
|
}
|
|
|
|
local_irq_save(flags);
|
|
|
|
imx_ep->stopped = 1;
|
|
nuke(imx_ep, -ESHUTDOWN);
|
|
imx_flush(imx_ep);
|
|
imx_ep_irq_disable(imx_ep);
|
|
|
|
local_irq_restore(flags);
|
|
|
|
D_EPX(imx_ep->imx_usb->dev,
|
|
"<%s> DISABLED %s\n", __func__, usb_ep->name);
|
|
return 0;
|
|
}
|
|
|
|
static struct usb_request *imx_ep_alloc_request
|
|
(struct usb_ep *usb_ep, gfp_t gfp_flags)
|
|
{
|
|
struct imx_request *req;
|
|
|
|
req = kzalloc(sizeof *req, gfp_flags);
|
|
if (!req || !usb_ep)
|
|
return 0;
|
|
|
|
INIT_LIST_HEAD(&req->queue);
|
|
req->in_use = 0;
|
|
|
|
return &req->req;
|
|
}
|
|
|
|
static void imx_ep_free_request
|
|
(struct usb_ep *usb_ep, struct usb_request *usb_req)
|
|
{
|
|
struct imx_request *req;
|
|
|
|
req = container_of(usb_req, struct imx_request, req);
|
|
WARN_ON(!list_empty(&req->queue));
|
|
kfree(req);
|
|
}
|
|
|
|
static int imx_ep_queue
|
|
(struct usb_ep *usb_ep, struct usb_request *usb_req, gfp_t gfp_flags)
|
|
{
|
|
struct imx_ep_struct *imx_ep;
|
|
struct imx_udc_struct *imx_usb;
|
|
struct imx_request *req;
|
|
unsigned long flags;
|
|
int ret = 0;
|
|
|
|
imx_ep = container_of(usb_ep, struct imx_ep_struct, ep);
|
|
imx_usb = imx_ep->imx_usb;
|
|
req = container_of(usb_req, struct imx_request, req);
|
|
|
|
/*
|
|
Special care on IMX udc.
|
|
Ignore enqueue when after set configuration from the
|
|
host. This assume all gadget drivers reply set
|
|
configuration with the next ep0 req enqueue.
|
|
*/
|
|
if (imx_usb->set_config && !EP_NO(imx_ep)) {
|
|
imx_usb->set_config = 0;
|
|
D_ERR(imx_usb->dev,
|
|
"<%s> gadget reply set config\n", __func__);
|
|
return 0;
|
|
}
|
|
|
|
if (unlikely(!usb_req || !req || !usb_req->complete || !usb_req->buf)) {
|
|
D_ERR(imx_usb->dev, "<%s> bad params\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (unlikely(!usb_ep || !imx_ep)) {
|
|
D_ERR(imx_usb->dev, "<%s> bad ep\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!imx_usb->driver || imx_usb->gadget.speed == USB_SPEED_UNKNOWN) {
|
|
D_ERR(imx_usb->dev, "<%s> bogus device state\n", __func__);
|
|
return -ESHUTDOWN;
|
|
}
|
|
|
|
/* Debug */
|
|
D_REQ(imx_usb->dev, "<%s> ep%d %s request for [%d] bytes\n",
|
|
__func__, EP_NO(imx_ep),
|
|
((!EP_NO(imx_ep) && imx_ep->imx_usb->ep0state
|
|
== EP0_IN_DATA_PHASE)
|
|
|| (EP_NO(imx_ep) && EP_DIR(imx_ep)))
|
|
? "IN" : "OUT", usb_req->length);
|
|
dump_req(__func__, imx_ep, usb_req);
|
|
|
|
if (imx_ep->stopped) {
|
|
usb_req->status = -ESHUTDOWN;
|
|
return -ESHUTDOWN;
|
|
}
|
|
|
|
if (req->in_use) {
|
|
D_ERR(imx_usb->dev,
|
|
"<%s> refusing to queue req %p (already queued)\n",
|
|
__func__, req);
|
|
return 0;
|
|
}
|
|
|
|
local_irq_save(flags);
|
|
|
|
usb_req->status = -EINPROGRESS;
|
|
usb_req->actual = 0;
|
|
|
|
ep_add_request(imx_ep, req);
|
|
|
|
if (!EP_NO(imx_ep))
|
|
ret = handle_ep0(imx_ep);
|
|
else
|
|
ret = handle_ep(imx_ep);
|
|
|
|
local_irq_restore(flags);
|
|
return ret;
|
|
}
|
|
|
|
static int imx_ep_dequeue(struct usb_ep *usb_ep, struct usb_request *usb_req)
|
|
{
|
|
|
|
struct imx_ep_struct *imx_ep = container_of
|
|
(usb_ep, struct imx_ep_struct, ep);
|
|
struct imx_request *req;
|
|
unsigned long flags;
|
|
|
|
if (unlikely(!usb_ep || !EP_NO(imx_ep))) {
|
|
D_ERR(imx_ep->imx_usb->dev, "<%s> bad ep\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
local_irq_save(flags);
|
|
|
|
/* make sure it's actually queued on this endpoint */
|
|
list_for_each_entry(req, &imx_ep->queue, queue) {
|
|
if (&req->req == usb_req)
|
|
break;
|
|
}
|
|
if (&req->req != usb_req) {
|
|
local_irq_restore(flags);
|
|
return -EINVAL;
|
|
}
|
|
|
|
done(imx_ep, req, -ECONNRESET);
|
|
|
|
local_irq_restore(flags);
|
|
return 0;
|
|
}
|
|
|
|
static int imx_ep_set_halt(struct usb_ep *usb_ep, int value)
|
|
{
|
|
struct imx_ep_struct *imx_ep = container_of
|
|
(usb_ep, struct imx_ep_struct, ep);
|
|
unsigned long flags;
|
|
|
|
if (unlikely(!usb_ep || !EP_NO(imx_ep))) {
|
|
D_ERR(imx_ep->imx_usb->dev, "<%s> bad ep\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
local_irq_save(flags);
|
|
|
|
if ((imx_ep->bEndpointAddress & USB_DIR_IN)
|
|
&& !list_empty(&imx_ep->queue)) {
|
|
local_irq_restore(flags);
|
|
return -EAGAIN;
|
|
}
|
|
|
|
imx_ep_stall(imx_ep);
|
|
|
|
local_irq_restore(flags);
|
|
|
|
D_EPX(imx_ep->imx_usb->dev, "<%s> %s halt\n", __func__, usb_ep->name);
|
|
return 0;
|
|
}
|
|
|
|
static int imx_ep_fifo_status(struct usb_ep *usb_ep)
|
|
{
|
|
struct imx_ep_struct *imx_ep = container_of
|
|
(usb_ep, struct imx_ep_struct, ep);
|
|
|
|
if (!usb_ep) {
|
|
D_ERR(imx_ep->imx_usb->dev, "<%s> bad ep\n", __func__);
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (imx_ep->imx_usb->gadget.speed == USB_SPEED_UNKNOWN)
|
|
return 0;
|
|
else
|
|
return imx_fifo_bcount(imx_ep);
|
|
}
|
|
|
|
static void imx_ep_fifo_flush(struct usb_ep *usb_ep)
|
|
{
|
|
struct imx_ep_struct *imx_ep = container_of
|
|
(usb_ep, struct imx_ep_struct, ep);
|
|
unsigned long flags;
|
|
|
|
local_irq_save(flags);
|
|
|
|
if (!usb_ep || !EP_NO(imx_ep) || !list_empty(&imx_ep->queue)) {
|
|
D_ERR(imx_ep->imx_usb->dev, "<%s> bad ep\n", __func__);
|
|
local_irq_restore(flags);
|
|
return;
|
|
}
|
|
|
|
/* toggle and halt bits stay unchanged */
|
|
imx_flush(imx_ep);
|
|
|
|
local_irq_restore(flags);
|
|
}
|
|
|
|
static struct usb_ep_ops imx_ep_ops = {
|
|
.enable = imx_ep_enable,
|
|
.disable = imx_ep_disable,
|
|
|
|
.alloc_request = imx_ep_alloc_request,
|
|
.free_request = imx_ep_free_request,
|
|
|
|
.queue = imx_ep_queue,
|
|
.dequeue = imx_ep_dequeue,
|
|
|
|
.set_halt = imx_ep_set_halt,
|
|
.fifo_status = imx_ep_fifo_status,
|
|
.fifo_flush = imx_ep_fifo_flush,
|
|
};
|
|
|
|
/*******************************************************************************
|
|
* USB endpoint control functions
|
|
*******************************************************************************
|
|
*/
|
|
|
|
void ep0_chg_stat(const char *label,
|
|
struct imx_udc_struct *imx_usb, enum ep0_state stat)
|
|
{
|
|
D_EP0(imx_usb->dev, "<%s> from %15s to %15s\n",
|
|
label, state_name[imx_usb->ep0state], state_name[stat]);
|
|
|
|
if (imx_usb->ep0state == stat)
|
|
return;
|
|
|
|
imx_usb->ep0state = stat;
|
|
}
|
|
|
|
static void usb_init_data(struct imx_udc_struct *imx_usb)
|
|
{
|
|
struct imx_ep_struct *imx_ep;
|
|
u8 i;
|
|
|
|
/* device/ep0 records init */
|
|
INIT_LIST_HEAD(&imx_usb->gadget.ep_list);
|
|
INIT_LIST_HEAD(&imx_usb->gadget.ep0->ep_list);
|
|
ep0_chg_stat(__func__, imx_usb, EP0_IDLE);
|
|
|
|
/* basic endpoint records init */
|
|
for (i = 0; i < IMX_USB_NB_EP; i++) {
|
|
imx_ep = &imx_usb->imx_ep[i];
|
|
|
|
if (i) {
|
|
list_add_tail(&imx_ep->ep.ep_list,
|
|
&imx_usb->gadget.ep_list);
|
|
imx_ep->stopped = 1;
|
|
} else
|
|
imx_ep->stopped = 0;
|
|
|
|
INIT_LIST_HEAD(&imx_ep->queue);
|
|
}
|
|
}
|
|
|
|
static void udc_stop_activity(struct imx_udc_struct *imx_usb,
|
|
struct usb_gadget_driver *driver)
|
|
{
|
|
struct imx_ep_struct *imx_ep;
|
|
int i;
|
|
|
|
if (imx_usb->gadget.speed == USB_SPEED_UNKNOWN)
|
|
driver = NULL;
|
|
|
|
/* prevent new request submissions, kill any outstanding requests */
|
|
for (i = 1; i < IMX_USB_NB_EP; i++) {
|
|
imx_ep = &imx_usb->imx_ep[i];
|
|
imx_flush(imx_ep);
|
|
imx_ep->stopped = 1;
|
|
imx_ep_irq_disable(imx_ep);
|
|
nuke(imx_ep, -ESHUTDOWN);
|
|
}
|
|
|
|
imx_usb->cfg = 0;
|
|
imx_usb->intf = 0;
|
|
imx_usb->alt = 0;
|
|
|
|
if (driver)
|
|
driver->disconnect(&imx_usb->gadget);
|
|
}
|
|
|
|
/*******************************************************************************
|
|
* Interrupt handlers
|
|
*******************************************************************************
|
|
*/
|
|
|
|
/*
|
|
* Called when timer expires.
|
|
* Timer is started when CFG_CHG is received.
|
|
*/
|
|
static void handle_config(unsigned long data)
|
|
{
|
|
struct imx_udc_struct *imx_usb = (void *)data;
|
|
struct usb_ctrlrequest u;
|
|
int temp, cfg, intf, alt;
|
|
|
|
local_irq_disable();
|
|
|
|
temp = __raw_readl(imx_usb->base + USB_STAT);
|
|
cfg = (temp & STAT_CFG) >> 5;
|
|
intf = (temp & STAT_INTF) >> 3;
|
|
alt = temp & STAT_ALTSET;
|
|
|
|
D_REQ(imx_usb->dev,
|
|
"<%s> orig config C=%d, I=%d, A=%d / "
|
|
"req config C=%d, I=%d, A=%d\n",
|
|
__func__, imx_usb->cfg, imx_usb->intf, imx_usb->alt,
|
|
cfg, intf, alt);
|
|
|
|
if (cfg == 1 || cfg == 2) {
|
|
|
|
if (imx_usb->cfg != cfg) {
|
|
u.bRequest = USB_REQ_SET_CONFIGURATION;
|
|
u.bRequestType = USB_DIR_OUT |
|
|
USB_TYPE_STANDARD |
|
|
USB_RECIP_DEVICE;
|
|
u.wValue = cfg;
|
|
u.wIndex = 0;
|
|
u.wLength = 0;
|
|
imx_usb->cfg = cfg;
|
|
imx_usb->driver->setup(&imx_usb->gadget, &u);
|
|
|
|
}
|
|
if (imx_usb->intf != intf || imx_usb->alt != alt) {
|
|
u.bRequest = USB_REQ_SET_INTERFACE;
|
|
u.bRequestType = USB_DIR_OUT |
|
|
USB_TYPE_STANDARD |
|
|
USB_RECIP_INTERFACE;
|
|
u.wValue = alt;
|
|
u.wIndex = intf;
|
|
u.wLength = 0;
|
|
imx_usb->intf = intf;
|
|
imx_usb->alt = alt;
|
|
imx_usb->driver->setup(&imx_usb->gadget, &u);
|
|
}
|
|
}
|
|
|
|
imx_usb->set_config = 0;
|
|
|
|
local_irq_enable();
|
|
}
|
|
|
|
static irqreturn_t imx_udc_irq(int irq, void *dev)
|
|
{
|
|
struct imx_udc_struct *imx_usb = dev;
|
|
int intr = __raw_readl(imx_usb->base + USB_INTR);
|
|
int temp;
|
|
|
|
if (intr & (INTR_WAKEUP | INTR_SUSPEND | INTR_RESUME | INTR_RESET_START
|
|
| INTR_RESET_STOP | INTR_CFG_CHG)) {
|
|
dump_intr(__func__, intr, imx_usb->dev);
|
|
dump_usb_stat(__func__, imx_usb);
|
|
}
|
|
|
|
if (!imx_usb->driver)
|
|
goto end_irq;
|
|
|
|
if (intr & INTR_SOF) {
|
|
/* Copy from Freescale BSP.
|
|
We must enable SOF intr and set CMDOVER.
|
|
Datasheet don't specifiy this action, but it
|
|
is done in Freescale BSP, so just copy it.
|
|
*/
|
|
if (imx_usb->ep0state == EP0_IDLE) {
|
|
temp = __raw_readl(imx_usb->base + USB_CTRL);
|
|
__raw_writel(temp | CTRL_CMDOVER,
|
|
imx_usb->base + USB_CTRL);
|
|
}
|
|
}
|
|
|
|
if (intr & INTR_CFG_CHG) {
|
|
/* A workaround of serious IMX UDC bug.
|
|
Handling of CFG_CHG should be delayed for some time, because
|
|
IMX does not NACK the host when CFG_CHG interrupt is pending.
|
|
There is no time to handle current CFG_CHG
|
|
if next CFG_CHG or SETUP packed is send immediately.
|
|
We have to clear CFG_CHG, start the timer and
|
|
NACK the host by setting CTRL_CMDOVER
|
|
if it sends any SETUP packet.
|
|
When timer expires, handler is called to handle configuration
|
|
changes. While CFG_CHG is not handled (set_config=1),
|
|
we must NACK the host to every SETUP packed.
|
|
This delay prevents from going out of sync with host.
|
|
*/
|
|
__raw_writel(INTR_CFG_CHG, imx_usb->base + USB_INTR);
|
|
imx_usb->set_config = 1;
|
|
mod_timer(&imx_usb->timer, jiffies + 5);
|
|
goto end_irq;
|
|
}
|
|
|
|
if (intr & INTR_WAKEUP) {
|
|
if (imx_usb->gadget.speed == USB_SPEED_UNKNOWN
|
|
&& imx_usb->driver && imx_usb->driver->resume)
|
|
imx_usb->driver->resume(&imx_usb->gadget);
|
|
imx_usb->set_config = 0;
|
|
del_timer(&imx_usb->timer);
|
|
imx_usb->gadget.speed = USB_SPEED_FULL;
|
|
}
|
|
|
|
if (intr & INTR_SUSPEND) {
|
|
if (imx_usb->gadget.speed != USB_SPEED_UNKNOWN
|
|
&& imx_usb->driver && imx_usb->driver->suspend)
|
|
imx_usb->driver->suspend(&imx_usb->gadget);
|
|
imx_usb->set_config = 0;
|
|
del_timer(&imx_usb->timer);
|
|
imx_usb->gadget.speed = USB_SPEED_UNKNOWN;
|
|
}
|
|
|
|
if (intr & INTR_RESET_START) {
|
|
__raw_writel(intr, imx_usb->base + USB_INTR);
|
|
udc_stop_activity(imx_usb, imx_usb->driver);
|
|
imx_usb->set_config = 0;
|
|
del_timer(&imx_usb->timer);
|
|
imx_usb->gadget.speed = USB_SPEED_UNKNOWN;
|
|
}
|
|
|
|
if (intr & INTR_RESET_STOP)
|
|
imx_usb->gadget.speed = USB_SPEED_FULL;
|
|
|
|
end_irq:
|
|
__raw_writel(intr, imx_usb->base + USB_INTR);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t imx_udc_ctrl_irq(int irq, void *dev)
|
|
{
|
|
struct imx_udc_struct *imx_usb = dev;
|
|
struct imx_ep_struct *imx_ep = &imx_usb->imx_ep[0];
|
|
int intr = __raw_readl(imx_usb->base + USB_EP_INTR(0));
|
|
|
|
dump_ep_intr(__func__, 0, intr, imx_usb->dev);
|
|
|
|
if (!imx_usb->driver) {
|
|
__raw_writel(intr, imx_usb->base + USB_EP_INTR(0));
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/* DEVREQ has highest priority */
|
|
if (intr & (EPINTR_DEVREQ | EPINTR_MDEVREQ))
|
|
handle_ep0_devreq(imx_usb);
|
|
/* Seem i.MX is missing EOF interrupt sometimes.
|
|
* Therefore we don't monitor EOF.
|
|
* We call handle_ep0() only if a request is queued for ep0.
|
|
*/
|
|
else if (!list_empty(&imx_ep->queue))
|
|
handle_ep0(imx_ep);
|
|
|
|
__raw_writel(intr, imx_usb->base + USB_EP_INTR(0));
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t imx_udc_bulk_irq(int irq, void *dev)
|
|
{
|
|
struct imx_udc_struct *imx_usb = dev;
|
|
struct imx_ep_struct *imx_ep = &imx_usb->imx_ep[irq - USBD_INT0];
|
|
int intr = __raw_readl(imx_usb->base + USB_EP_INTR(EP_NO(imx_ep)));
|
|
|
|
dump_ep_intr(__func__, irq - USBD_INT0, intr, imx_usb->dev);
|
|
|
|
if (!imx_usb->driver) {
|
|
__raw_writel(intr, imx_usb->base + USB_EP_INTR(EP_NO(imx_ep)));
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
handle_ep(imx_ep);
|
|
|
|
__raw_writel(intr, imx_usb->base + USB_EP_INTR(EP_NO(imx_ep)));
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
irq_handler_t intr_handler(int i)
|
|
{
|
|
switch (i) {
|
|
case 0:
|
|
return imx_udc_ctrl_irq;
|
|
case 1:
|
|
case 2:
|
|
case 3:
|
|
case 4:
|
|
case 5:
|
|
return imx_udc_bulk_irq;
|
|
default:
|
|
return imx_udc_irq;
|
|
}
|
|
}
|
|
|
|
/*******************************************************************************
|
|
* Static defined IMX UDC structure
|
|
*******************************************************************************
|
|
*/
|
|
|
|
static const struct usb_gadget_ops imx_udc_ops = {
|
|
.get_frame = imx_udc_get_frame,
|
|
.wakeup = imx_udc_wakeup,
|
|
};
|
|
|
|
static struct imx_udc_struct controller = {
|
|
.gadget = {
|
|
.ops = &imx_udc_ops,
|
|
.ep0 = &controller.imx_ep[0].ep,
|
|
.name = driver_name,
|
|
.dev = {
|
|
.init_name = "gadget",
|
|
},
|
|
},
|
|
|
|
.imx_ep[0] = {
|
|
.ep = {
|
|
.name = ep0name,
|
|
.ops = &imx_ep_ops,
|
|
.maxpacket = 32,
|
|
},
|
|
.imx_usb = &controller,
|
|
.fifosize = 32,
|
|
.bEndpointAddress = 0,
|
|
.bmAttributes = USB_ENDPOINT_XFER_CONTROL,
|
|
},
|
|
.imx_ep[1] = {
|
|
.ep = {
|
|
.name = "ep1in-bulk",
|
|
.ops = &imx_ep_ops,
|
|
.maxpacket = 64,
|
|
},
|
|
.imx_usb = &controller,
|
|
.fifosize = 64,
|
|
.bEndpointAddress = USB_DIR_IN | 1,
|
|
.bmAttributes = USB_ENDPOINT_XFER_BULK,
|
|
},
|
|
.imx_ep[2] = {
|
|
.ep = {
|
|
.name = "ep2out-bulk",
|
|
.ops = &imx_ep_ops,
|
|
.maxpacket = 64,
|
|
},
|
|
.imx_usb = &controller,
|
|
.fifosize = 64,
|
|
.bEndpointAddress = USB_DIR_OUT | 2,
|
|
.bmAttributes = USB_ENDPOINT_XFER_BULK,
|
|
},
|
|
.imx_ep[3] = {
|
|
.ep = {
|
|
.name = "ep3out-bulk",
|
|
.ops = &imx_ep_ops,
|
|
.maxpacket = 32,
|
|
},
|
|
.imx_usb = &controller,
|
|
.fifosize = 32,
|
|
.bEndpointAddress = USB_DIR_OUT | 3,
|
|
.bmAttributes = USB_ENDPOINT_XFER_BULK,
|
|
},
|
|
.imx_ep[4] = {
|
|
.ep = {
|
|
.name = "ep4in-int",
|
|
.ops = &imx_ep_ops,
|
|
.maxpacket = 32,
|
|
},
|
|
.imx_usb = &controller,
|
|
.fifosize = 32,
|
|
.bEndpointAddress = USB_DIR_IN | 4,
|
|
.bmAttributes = USB_ENDPOINT_XFER_INT,
|
|
},
|
|
.imx_ep[5] = {
|
|
.ep = {
|
|
.name = "ep5out-int",
|
|
.ops = &imx_ep_ops,
|
|
.maxpacket = 32,
|
|
},
|
|
.imx_usb = &controller,
|
|
.fifosize = 32,
|
|
.bEndpointAddress = USB_DIR_OUT | 5,
|
|
.bmAttributes = USB_ENDPOINT_XFER_INT,
|
|
},
|
|
};
|
|
|
|
/*******************************************************************************
|
|
* USB gadged driver functions
|
|
*******************************************************************************
|
|
*/
|
|
int usb_gadget_register_driver(struct usb_gadget_driver *driver)
|
|
{
|
|
struct imx_udc_struct *imx_usb = &controller;
|
|
int retval;
|
|
|
|
if (!driver
|
|
|| driver->speed < USB_SPEED_FULL
|
|
|| !driver->bind
|
|
|| !driver->disconnect
|
|
|| !driver->setup)
|
|
return -EINVAL;
|
|
if (!imx_usb)
|
|
return -ENODEV;
|
|
if (imx_usb->driver)
|
|
return -EBUSY;
|
|
|
|
/* first hook up the driver ... */
|
|
imx_usb->driver = driver;
|
|
imx_usb->gadget.dev.driver = &driver->driver;
|
|
|
|
retval = device_add(&imx_usb->gadget.dev);
|
|
if (retval)
|
|
goto fail;
|
|
retval = driver->bind(&imx_usb->gadget);
|
|
if (retval) {
|
|
D_ERR(imx_usb->dev, "<%s> bind to driver %s --> error %d\n",
|
|
__func__, driver->driver.name, retval);
|
|
device_del(&imx_usb->gadget.dev);
|
|
|
|
goto fail;
|
|
}
|
|
|
|
D_INI(imx_usb->dev, "<%s> registered gadget driver '%s'\n",
|
|
__func__, driver->driver.name);
|
|
|
|
imx_udc_enable(imx_usb);
|
|
|
|
return 0;
|
|
fail:
|
|
imx_usb->driver = NULL;
|
|
imx_usb->gadget.dev.driver = NULL;
|
|
return retval;
|
|
}
|
|
EXPORT_SYMBOL(usb_gadget_register_driver);
|
|
|
|
int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
|
|
{
|
|
struct imx_udc_struct *imx_usb = &controller;
|
|
|
|
if (!imx_usb)
|
|
return -ENODEV;
|
|
if (!driver || driver != imx_usb->driver || !driver->unbind)
|
|
return -EINVAL;
|
|
|
|
udc_stop_activity(imx_usb, driver);
|
|
imx_udc_disable(imx_usb);
|
|
del_timer(&imx_usb->timer);
|
|
|
|
driver->unbind(&imx_usb->gadget);
|
|
imx_usb->gadget.dev.driver = NULL;
|
|
imx_usb->driver = NULL;
|
|
|
|
device_del(&imx_usb->gadget.dev);
|
|
|
|
D_INI(imx_usb->dev, "<%s> unregistered gadget driver '%s'\n",
|
|
__func__, driver->driver.name);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(usb_gadget_unregister_driver);
|
|
|
|
/*******************************************************************************
|
|
* Module functions
|
|
*******************************************************************************
|
|
*/
|
|
|
|
static int __init imx_udc_probe(struct platform_device *pdev)
|
|
{
|
|
struct imx_udc_struct *imx_usb = &controller;
|
|
struct resource *res;
|
|
struct imxusb_platform_data *pdata;
|
|
struct clk *clk;
|
|
void __iomem *base;
|
|
int ret = 0;
|
|
int i, res_size;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!res) {
|
|
dev_err(&pdev->dev, "can't get device resources\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
pdata = pdev->dev.platform_data;
|
|
if (!pdata) {
|
|
dev_err(&pdev->dev, "driver needs platform data\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
res_size = res->end - res->start + 1;
|
|
if (!request_mem_region(res->start, res_size, res->name)) {
|
|
dev_err(&pdev->dev, "can't allocate %d bytes at %d address\n",
|
|
res_size, res->start);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
if (pdata->init) {
|
|
ret = pdata->init(&pdev->dev);
|
|
if (ret)
|
|
goto fail0;
|
|
}
|
|
|
|
base = ioremap(res->start, res_size);
|
|
if (!base) {
|
|
dev_err(&pdev->dev, "ioremap failed\n");
|
|
ret = -EIO;
|
|
goto fail1;
|
|
}
|
|
|
|
clk = clk_get(NULL, "usbd_clk");
|
|
if (IS_ERR(clk)) {
|
|
ret = PTR_ERR(clk);
|
|
dev_err(&pdev->dev, "can't get USB clock\n");
|
|
goto fail2;
|
|
}
|
|
clk_enable(clk);
|
|
|
|
if (clk_get_rate(clk) != 48000000) {
|
|
D_INI(&pdev->dev,
|
|
"Bad USB clock (%d Hz), changing to 48000000 Hz\n",
|
|
(int)clk_get_rate(clk));
|
|
if (clk_set_rate(clk, 48000000)) {
|
|
dev_err(&pdev->dev,
|
|
"Unable to set correct USB clock (48MHz)\n");
|
|
ret = -EIO;
|
|
goto fail3;
|
|
}
|
|
}
|
|
|
|
for (i = 0; i < IMX_USB_NB_EP + 1; i++) {
|
|
imx_usb->usbd_int[i] = platform_get_irq(pdev, i);
|
|
if (imx_usb->usbd_int[i] < 0) {
|
|
dev_err(&pdev->dev, "can't get irq number\n");
|
|
ret = -ENODEV;
|
|
goto fail3;
|
|
}
|
|
}
|
|
|
|
for (i = 0; i < IMX_USB_NB_EP + 1; i++) {
|
|
ret = request_irq(imx_usb->usbd_int[i], intr_handler(i),
|
|
IRQF_DISABLED, driver_name, imx_usb);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "can't get irq %i, err %d\n",
|
|
imx_usb->usbd_int[i], ret);
|
|
for (--i; i >= 0; i--)
|
|
free_irq(imx_usb->usbd_int[i], imx_usb);
|
|
goto fail3;
|
|
}
|
|
}
|
|
|
|
imx_usb->res = res;
|
|
imx_usb->base = base;
|
|
imx_usb->clk = clk;
|
|
imx_usb->dev = &pdev->dev;
|
|
|
|
device_initialize(&imx_usb->gadget.dev);
|
|
|
|
imx_usb->gadget.dev.parent = &pdev->dev;
|
|
imx_usb->gadget.dev.dma_mask = pdev->dev.dma_mask;
|
|
|
|
platform_set_drvdata(pdev, imx_usb);
|
|
|
|
usb_init_data(imx_usb);
|
|
imx_udc_init(imx_usb);
|
|
|
|
init_timer(&imx_usb->timer);
|
|
imx_usb->timer.function = handle_config;
|
|
imx_usb->timer.data = (unsigned long)imx_usb;
|
|
|
|
return 0;
|
|
|
|
fail3:
|
|
clk_put(clk);
|
|
clk_disable(clk);
|
|
fail2:
|
|
iounmap(base);
|
|
fail1:
|
|
if (pdata->exit)
|
|
pdata->exit(&pdev->dev);
|
|
fail0:
|
|
release_mem_region(res->start, res_size);
|
|
return ret;
|
|
}
|
|
|
|
static int __exit imx_udc_remove(struct platform_device *pdev)
|
|
{
|
|
struct imx_udc_struct *imx_usb = platform_get_drvdata(pdev);
|
|
struct imxusb_platform_data *pdata = pdev->dev.platform_data;
|
|
int i;
|
|
|
|
imx_udc_disable(imx_usb);
|
|
del_timer(&imx_usb->timer);
|
|
|
|
for (i = 0; i < IMX_USB_NB_EP + 1; i++)
|
|
free_irq(imx_usb->usbd_int[i], imx_usb);
|
|
|
|
clk_put(imx_usb->clk);
|
|
clk_disable(imx_usb->clk);
|
|
iounmap(imx_usb->base);
|
|
|
|
release_mem_region(imx_usb->res->start,
|
|
imx_usb->res->end - imx_usb->res->start + 1);
|
|
|
|
if (pdata->exit)
|
|
pdata->exit(&pdev->dev);
|
|
|
|
platform_set_drvdata(pdev, NULL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*----------------------------------------------------------------------------*/
|
|
|
|
#ifdef CONFIG_PM
|
|
#define imx_udc_suspend NULL
|
|
#define imx_udc_resume NULL
|
|
#else
|
|
#define imx_udc_suspend NULL
|
|
#define imx_udc_resume NULL
|
|
#endif
|
|
|
|
/*----------------------------------------------------------------------------*/
|
|
|
|
static struct platform_driver udc_driver = {
|
|
.driver = {
|
|
.name = driver_name,
|
|
.owner = THIS_MODULE,
|
|
},
|
|
.remove = __exit_p(imx_udc_remove),
|
|
.suspend = imx_udc_suspend,
|
|
.resume = imx_udc_resume,
|
|
};
|
|
|
|
static int __init udc_init(void)
|
|
{
|
|
return platform_driver_probe(&udc_driver, imx_udc_probe);
|
|
}
|
|
module_init(udc_init);
|
|
|
|
static void __exit udc_exit(void)
|
|
{
|
|
platform_driver_unregister(&udc_driver);
|
|
}
|
|
module_exit(udc_exit);
|
|
|
|
MODULE_DESCRIPTION("IMX USB Device Controller driver");
|
|
MODULE_AUTHOR("Darius Augulis <augulis.darius@gmail.com>");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:imx_udc");
|