Ben Dooks e44df332f3 clk: shmobile: fix setting paretn clock rate ... If the driver needs to change a clock rate, then it must be propogated through the MSTP clock to the parent clock (such as shdi0 -> sd0). Without this we cannot up-rate default clocks which are really slow (such as the mmcif1 which defaults to 12MHz where it could be running at 97MHz) Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>		2014-04-02 11:31:05 -07:00
..
clk-div6.c	clk: shmobile: div6: use proper description in kernel doc	2014-02-25 00:26:37 -08:00
clk-emev2.c	clk: emev2: Add support for emev2 SMU clocks with DT	2013-12-14 13:17:55 +09:00
clk-mstp.c	clk: shmobile: fix setting paretn clock rate	2014-04-02 11:31:05 -07:00
clk-rcar-gen2.c	clk: shmobile: rcar-gen2: fix lb/sd0/sd1/sdh clock parent to pll1	2014-03-31 17:06:28 -07:00
clk-rz.c	clk: shmobile: add CPG driver for rz-platforms	2014-03-20 18:22:36 -07:00
Makefile	clk: shmobile: add CPG driver for rz-platforms	2014-03-20 18:22:36 -07:00