mirror of
https://github.com/torvalds/linux.git
synced 2024-11-14 08:02:07 +00:00
a140986fd0
The driver doesn't have a struct of_device_id table but supported devices are registered via Device Trees. This is working on the assumption that a I2C device registered via OF will always match a legacy I2C device ID and that the MODALIAS reported will always be of the form i2c:<device>. But this could change in the future so the correct approach is to have an OF device ID table if the devices are registered via OF. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
340 lines
8.6 KiB
C
340 lines
8.6 KiB
C
/*
|
|
* ads1015.c - lm_sensors driver for ads1015 12-bit 4-input ADC
|
|
* (C) Copyright 2010
|
|
* Dirk Eibach, Guntermann & Drunck GmbH <eibach@gdsys.de>
|
|
*
|
|
* Based on the ads7828 driver by Steve Hardy.
|
|
*
|
|
* Datasheet available at: http://focus.ti.com/lit/ds/symlink/ads1015.pdf
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/hwmon.h>
|
|
#include <linux/hwmon-sysfs.h>
|
|
#include <linux/err.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of.h>
|
|
|
|
#include <linux/i2c/ads1015.h>
|
|
|
|
/* ADS1015 registers */
|
|
enum {
|
|
ADS1015_CONVERSION = 0,
|
|
ADS1015_CONFIG = 1,
|
|
};
|
|
|
|
/* PGA fullscale voltages in mV */
|
|
static const unsigned int fullscale_table[8] = {
|
|
6144, 4096, 2048, 1024, 512, 256, 256, 256 };
|
|
|
|
/* Data rates in samples per second */
|
|
static const unsigned int data_rate_table_1015[8] = {
|
|
128, 250, 490, 920, 1600, 2400, 3300, 3300
|
|
};
|
|
|
|
static const unsigned int data_rate_table_1115[8] = {
|
|
8, 16, 32, 64, 128, 250, 475, 860
|
|
};
|
|
|
|
#define ADS1015_DEFAULT_CHANNELS 0xff
|
|
#define ADS1015_DEFAULT_PGA 2
|
|
#define ADS1015_DEFAULT_DATA_RATE 4
|
|
|
|
enum ads1015_chips {
|
|
ads1015,
|
|
ads1115,
|
|
};
|
|
|
|
struct ads1015_data {
|
|
struct device *hwmon_dev;
|
|
struct mutex update_lock; /* mutex protect updates */
|
|
struct ads1015_channel_data channel_data[ADS1015_CHANNELS];
|
|
enum ads1015_chips id;
|
|
};
|
|
|
|
static int ads1015_read_adc(struct i2c_client *client, unsigned int channel)
|
|
{
|
|
u16 config;
|
|
struct ads1015_data *data = i2c_get_clientdata(client);
|
|
unsigned int pga = data->channel_data[channel].pga;
|
|
unsigned int data_rate = data->channel_data[channel].data_rate;
|
|
unsigned int conversion_time_ms;
|
|
const unsigned int * const rate_table = data->id == ads1115 ?
|
|
data_rate_table_1115 : data_rate_table_1015;
|
|
int res;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
|
|
/* get channel parameters */
|
|
res = i2c_smbus_read_word_swapped(client, ADS1015_CONFIG);
|
|
if (res < 0)
|
|
goto err_unlock;
|
|
config = res;
|
|
conversion_time_ms = DIV_ROUND_UP(1000, rate_table[data_rate]);
|
|
|
|
/* setup and start single conversion */
|
|
config &= 0x001f;
|
|
config |= (1 << 15) | (1 << 8);
|
|
config |= (channel & 0x0007) << 12;
|
|
config |= (pga & 0x0007) << 9;
|
|
config |= (data_rate & 0x0007) << 5;
|
|
|
|
res = i2c_smbus_write_word_swapped(client, ADS1015_CONFIG, config);
|
|
if (res < 0)
|
|
goto err_unlock;
|
|
|
|
/* wait until conversion finished */
|
|
msleep(conversion_time_ms);
|
|
res = i2c_smbus_read_word_swapped(client, ADS1015_CONFIG);
|
|
if (res < 0)
|
|
goto err_unlock;
|
|
config = res;
|
|
if (!(config & (1 << 15))) {
|
|
/* conversion not finished in time */
|
|
res = -EIO;
|
|
goto err_unlock;
|
|
}
|
|
|
|
res = i2c_smbus_read_word_swapped(client, ADS1015_CONVERSION);
|
|
|
|
err_unlock:
|
|
mutex_unlock(&data->update_lock);
|
|
return res;
|
|
}
|
|
|
|
static int ads1015_reg_to_mv(struct i2c_client *client, unsigned int channel,
|
|
s16 reg)
|
|
{
|
|
struct ads1015_data *data = i2c_get_clientdata(client);
|
|
unsigned int pga = data->channel_data[channel].pga;
|
|
int fullscale = fullscale_table[pga];
|
|
const int mask = data->id == ads1115 ? 0x7fff : 0x7ff0;
|
|
|
|
return DIV_ROUND_CLOSEST(reg * fullscale, mask);
|
|
}
|
|
|
|
/* sysfs callback function */
|
|
static ssize_t show_in(struct device *dev, struct device_attribute *da,
|
|
char *buf)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
int res;
|
|
int index = attr->index;
|
|
|
|
res = ads1015_read_adc(client, index);
|
|
if (res < 0)
|
|
return res;
|
|
|
|
return sprintf(buf, "%d\n", ads1015_reg_to_mv(client, index, res));
|
|
}
|
|
|
|
static const struct sensor_device_attribute ads1015_in[] = {
|
|
SENSOR_ATTR(in0_input, S_IRUGO, show_in, NULL, 0),
|
|
SENSOR_ATTR(in1_input, S_IRUGO, show_in, NULL, 1),
|
|
SENSOR_ATTR(in2_input, S_IRUGO, show_in, NULL, 2),
|
|
SENSOR_ATTR(in3_input, S_IRUGO, show_in, NULL, 3),
|
|
SENSOR_ATTR(in4_input, S_IRUGO, show_in, NULL, 4),
|
|
SENSOR_ATTR(in5_input, S_IRUGO, show_in, NULL, 5),
|
|
SENSOR_ATTR(in6_input, S_IRUGO, show_in, NULL, 6),
|
|
SENSOR_ATTR(in7_input, S_IRUGO, show_in, NULL, 7),
|
|
};
|
|
|
|
/*
|
|
* Driver interface
|
|
*/
|
|
|
|
static int ads1015_remove(struct i2c_client *client)
|
|
{
|
|
struct ads1015_data *data = i2c_get_clientdata(client);
|
|
int k;
|
|
|
|
hwmon_device_unregister(data->hwmon_dev);
|
|
for (k = 0; k < ADS1015_CHANNELS; ++k)
|
|
device_remove_file(&client->dev, &ads1015_in[k].dev_attr);
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_OF
|
|
static int ads1015_get_channels_config_of(struct i2c_client *client)
|
|
{
|
|
struct ads1015_data *data = i2c_get_clientdata(client);
|
|
struct device_node *node;
|
|
|
|
if (!client->dev.of_node
|
|
|| !of_get_next_child(client->dev.of_node, NULL))
|
|
return -EINVAL;
|
|
|
|
for_each_child_of_node(client->dev.of_node, node) {
|
|
u32 pval;
|
|
unsigned int channel;
|
|
unsigned int pga = ADS1015_DEFAULT_PGA;
|
|
unsigned int data_rate = ADS1015_DEFAULT_DATA_RATE;
|
|
|
|
if (of_property_read_u32(node, "reg", &pval)) {
|
|
dev_err(&client->dev, "invalid reg on %s\n",
|
|
node->full_name);
|
|
continue;
|
|
}
|
|
|
|
channel = pval;
|
|
if (channel >= ADS1015_CHANNELS) {
|
|
dev_err(&client->dev,
|
|
"invalid channel index %d on %s\n",
|
|
channel, node->full_name);
|
|
continue;
|
|
}
|
|
|
|
if (!of_property_read_u32(node, "ti,gain", &pval)) {
|
|
pga = pval;
|
|
if (pga > 6) {
|
|
dev_err(&client->dev, "invalid gain on %s\n",
|
|
node->full_name);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
if (!of_property_read_u32(node, "ti,datarate", &pval)) {
|
|
data_rate = pval;
|
|
if (data_rate > 7) {
|
|
dev_err(&client->dev,
|
|
"invalid data_rate on %s\n",
|
|
node->full_name);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
data->channel_data[channel].enabled = true;
|
|
data->channel_data[channel].pga = pga;
|
|
data->channel_data[channel].data_rate = data_rate;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static void ads1015_get_channels_config(struct i2c_client *client)
|
|
{
|
|
unsigned int k;
|
|
struct ads1015_data *data = i2c_get_clientdata(client);
|
|
struct ads1015_platform_data *pdata = dev_get_platdata(&client->dev);
|
|
|
|
/* prefer platform data */
|
|
if (pdata) {
|
|
memcpy(data->channel_data, pdata->channel_data,
|
|
sizeof(data->channel_data));
|
|
return;
|
|
}
|
|
|
|
#ifdef CONFIG_OF
|
|
if (!ads1015_get_channels_config_of(client))
|
|
return;
|
|
#endif
|
|
|
|
/* fallback on default configuration */
|
|
for (k = 0; k < ADS1015_CHANNELS; ++k) {
|
|
data->channel_data[k].enabled = true;
|
|
data->channel_data[k].pga = ADS1015_DEFAULT_PGA;
|
|
data->channel_data[k].data_rate = ADS1015_DEFAULT_DATA_RATE;
|
|
}
|
|
}
|
|
|
|
static int ads1015_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct ads1015_data *data;
|
|
int err;
|
|
unsigned int k;
|
|
|
|
data = devm_kzalloc(&client->dev, sizeof(struct ads1015_data),
|
|
GFP_KERNEL);
|
|
if (!data)
|
|
return -ENOMEM;
|
|
|
|
if (client->dev.of_node)
|
|
data->id = (enum ads1015_chips)
|
|
of_device_get_match_data(&client->dev);
|
|
else
|
|
data->id = id->driver_data;
|
|
i2c_set_clientdata(client, data);
|
|
mutex_init(&data->update_lock);
|
|
|
|
/* build sysfs attribute group */
|
|
ads1015_get_channels_config(client);
|
|
for (k = 0; k < ADS1015_CHANNELS; ++k) {
|
|
if (!data->channel_data[k].enabled)
|
|
continue;
|
|
err = device_create_file(&client->dev, &ads1015_in[k].dev_attr);
|
|
if (err)
|
|
goto exit_remove;
|
|
}
|
|
|
|
data->hwmon_dev = hwmon_device_register(&client->dev);
|
|
if (IS_ERR(data->hwmon_dev)) {
|
|
err = PTR_ERR(data->hwmon_dev);
|
|
goto exit_remove;
|
|
}
|
|
|
|
return 0;
|
|
|
|
exit_remove:
|
|
for (k = 0; k < ADS1015_CHANNELS; ++k)
|
|
device_remove_file(&client->dev, &ads1015_in[k].dev_attr);
|
|
return err;
|
|
}
|
|
|
|
static const struct i2c_device_id ads1015_id[] = {
|
|
{ "ads1015", ads1015},
|
|
{ "ads1115", ads1115},
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, ads1015_id);
|
|
|
|
static const struct of_device_id ads1015_of_match[] = {
|
|
{
|
|
.compatible = "ti,ads1015",
|
|
.data = (void *)ads1015
|
|
},
|
|
{
|
|
.compatible = "ti,ads1115",
|
|
.data = (void *)ads1115
|
|
},
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, ads1015_of_match);
|
|
|
|
static struct i2c_driver ads1015_driver = {
|
|
.driver = {
|
|
.name = "ads1015",
|
|
.of_match_table = of_match_ptr(ads1015_of_match),
|
|
},
|
|
.probe = ads1015_probe,
|
|
.remove = ads1015_remove,
|
|
.id_table = ads1015_id,
|
|
};
|
|
|
|
module_i2c_driver(ads1015_driver);
|
|
|
|
MODULE_AUTHOR("Dirk Eibach <eibach@gdsys.de>");
|
|
MODULE_DESCRIPTION("ADS1015 driver");
|
|
MODULE_LICENSE("GPL");
|