mirror of
https://github.com/torvalds/linux.git
synced 2024-11-16 09:02:00 +00:00
1da177e4c3
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
40 lines
1.8 KiB
Plaintext
40 lines
1.8 KiB
Plaintext
Itsy is a research project done by the Western Research Lab, and Systems
|
|
Research Center in Palo Alto, CA. The Itsy project is one of several
|
|
research projects at Compaq that are related to pocket computing.
|
|
|
|
For more information, see:
|
|
|
|
http://www.research.digital.com/wrl/itsy/index.html
|
|
|
|
Notes on initial 2.4 Itsy support (8/27/2000) :
|
|
The port was done on an Itsy version 1.5 machine with a daughtercard with
|
|
64 Meg of DRAM and 32 Meg of Flash. The initial work includes support for
|
|
serial console (to see what you're doing). No other devices have been
|
|
enabled.
|
|
|
|
To build, do a "make menuconfig" (or xmenuconfig) and select Itsy support.
|
|
Disable Flash and LCD support. and then do a make zImage.
|
|
Finally, you will need to cd to arch/arm/boot/tools and execute a make there
|
|
to build the params-itsy program used to boot the kernel.
|
|
|
|
In order to install the port of 2.4 to the itsy, You will need to set the
|
|
configuration parameters in the monitor as follows:
|
|
Arg 1:0x08340000, Arg2: 0xC0000000, Arg3:18 (0x12), Arg4:0
|
|
Make sure the start-routine address is set to 0x00060000.
|
|
|
|
Next, flash the params-itsy program to 0x00060000 ("p 1 0x00060000" in the
|
|
flash menu) Flash the kernel in arch/arm/boot/zImage into 0x08340000
|
|
("p 1 0x00340000"). Finally flash an initial ramdisk into 0xC8000000
|
|
("p 2 0x0") We used ramdisk-2-30.gz from the 0.11 version directory on
|
|
handhelds.org.
|
|
|
|
The serial connection we established was at:
|
|
8-bit data, no parity, 1 stop bit(s), 115200.00 b/s. in the monitor, in the
|
|
params-itsy program, and in the kernel itself. This can be changed, but
|
|
not easily. The monitor parameters are easily changed, the params program
|
|
setup is assembly outl's, and the kernel is a configuration item specific to
|
|
the itsy. (i.e. grep for CONFIG_SA1100_ITSY and you'll find where it is.)
|
|
|
|
|
|
This should get you a properly booting 2.4 kernel on the itsy.
|