mirror of
https://github.com/torvalds/linux.git
synced 2024-11-11 06:31:49 +00:00
f2918ad89d
I noticed that this has been missing for quite some time so I decided it was about time to document it. Signed-off-by: Felipe Balbi <balbi@ti.com>
94 lines
2.4 KiB
Plaintext
94 lines
2.4 KiB
Plaintext
What: /sys/class/udc/<udc>/a_alt_hnp_support
|
|
Date: June 2011
|
|
KernelVersion: 3.1
|
|
Contact: Felipe Balbi <balbi@kernel.org>
|
|
Description:
|
|
Indicates if an OTG A-Host supports HNP at an alternate port.
|
|
Users:
|
|
|
|
What: /sys/class/udc/<udc>/a_hnp_support
|
|
Date: June 2011
|
|
KernelVersion: 3.1
|
|
Contact: Felipe Balbi <balbi@kernel.org>
|
|
Description:
|
|
Indicates if an OTG A-Host supports HNP at this port.
|
|
Users:
|
|
|
|
What: /sys/class/udc/<udc>/b_hnp_enable
|
|
Date: June 2011
|
|
KernelVersion: 3.1
|
|
Contact: Felipe Balbi <balbi@kernel.org>
|
|
Description:
|
|
Indicates if an OTG A-Host enabled HNP support.
|
|
Users:
|
|
|
|
What: /sys/class/udc/<udc>/current_speed
|
|
Date: June 2011
|
|
KernelVersion: 3.1
|
|
Contact: Felipe Balbi <balbi@kernel.org>
|
|
Description:
|
|
Indicates the current negotiated speed at this port.
|
|
Users:
|
|
|
|
What: /sys/class/udc/<udc>/is_a_peripheral
|
|
Date: June 2011
|
|
KernelVersion: 3.1
|
|
Contact: Felipe Balbi <balbi@kernel.org>
|
|
Description:
|
|
Indicates that this port is the default Host on an OTG session
|
|
but HNP was used to switch roles.
|
|
Users:
|
|
|
|
What: /sys/class/udc/<udc>/is_otg
|
|
Date: June 2011
|
|
KernelVersion: 3.1
|
|
Contact: Felipe Balbi <balbi@kernel.org>
|
|
Description:
|
|
Indicates that this port support OTG.
|
|
Users:
|
|
|
|
What: /sys/class/udc/<udc>/maximum_speed
|
|
Date: June 2011
|
|
KernelVersion: 3.1
|
|
Contact: Felipe Balbi <balbi@kernel.org>
|
|
Description:
|
|
Indicates the maximum USB speed supported by this port.
|
|
Users:
|
|
|
|
What: /sys/class/udc/<udc>/maximum_speed
|
|
Date: June 2011
|
|
KernelVersion: 3.1
|
|
Contact: Felipe Balbi <balbi@kernel.org>
|
|
Description:
|
|
Indicates the maximum USB speed supported by this port.
|
|
Users:
|
|
|
|
What: /sys/class/udc/<udc>/soft_connect
|
|
Date: June 2011
|
|
KernelVersion: 3.1
|
|
Contact: Felipe Balbi <balbi@kernel.org>
|
|
Description:
|
|
Allows users to disconnect data pullup resistors thus causing a
|
|
logical disconnection from the USB Host.
|
|
Users:
|
|
|
|
What: /sys/class/udc/<udc>/srp
|
|
Date: June 2011
|
|
KernelVersion: 3.1
|
|
Contact: Felipe Balbi <balbi@kernel.org>
|
|
Description:
|
|
Allows users to manually start Session Request Protocol.
|
|
Users:
|
|
|
|
What: /sys/class/udc/<udc>/state
|
|
Date: June 2011
|
|
KernelVersion: 3.1
|
|
Contact: Felipe Balbi <balbi@kernel.org>
|
|
Description:
|
|
Indicates current state of the USB Device Controller. Valid
|
|
states are: 'not-attached', 'attached', 'powered',
|
|
'reconnecting', 'unauthenticated', 'default', 'addressed',
|
|
'configured', and 'suspended'; however not all USB Device
|
|
Controllers support reporting all states.
|
|
Users:
|