linux/drivers/regulator/max77686.c
Linus Torvalds e6b5be2be4 Driver core patches for 3.19-rc1
Here's the set of driver core patches for 3.19-rc1.
 
 They are dominated by the removal of the .owner field in platform
 drivers.  They touch a lot of files, but they are "simple" changes, just
 removing a line in a structure.
 
 Other than that, a few minor driver core and debugfs changes.  There are
 some ath9k patches coming in through this tree that have been acked by
 the wireless maintainers as they relied on the debugfs changes.
 
 Everything has been in linux-next for a while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlSOD20ACgkQMUfUDdst+ylLPACg2QrW1oHhdTMT9WI8jihlHVRM
 53kAoLeteByQ3iVwWurwwseRPiWa8+MI
 =OVRS
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core update from Greg KH:
 "Here's the set of driver core patches for 3.19-rc1.

  They are dominated by the removal of the .owner field in platform
  drivers.  They touch a lot of files, but they are "simple" changes,
  just removing a line in a structure.

  Other than that, a few minor driver core and debugfs changes.  There
  are some ath9k patches coming in through this tree that have been
  acked by the wireless maintainers as they relied on the debugfs
  changes.

  Everything has been in linux-next for a while"

* tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits)
  Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries"
  fs: debugfs: add forward declaration for struct device type
  firmware class: Deletion of an unnecessary check before the function call "vunmap"
  firmware loader: fix hung task warning dump
  devcoredump: provide a one-way disable function
  device: Add dev_<level>_once variants
  ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries
  ath: use seq_file api for ath9k debugfs files
  debugfs: add helper function to create device related seq_file
  drivers/base: cacheinfo: remove noisy error boot message
  Revert "core: platform: add warning if driver has no owner"
  drivers: base: support cpu cache information interface to userspace via sysfs
  drivers: base: add cpu_device_create to support per-cpu devices
  topology: replace custom attribute macros with standard DEVICE_ATTR*
  cpumask: factor out show_cpumap into separate helper function
  driver core: Fix unbalanced device reference in drivers_probe
  driver core: fix race with userland in device_add()
  sysfs/kernfs: make read requests on pre-alloc files use the buffer.
  sysfs/kernfs: allow attributes to request write buffer be pre-allocated.
  fs: sysfs: return EGBIG on write if offset is larger than file size
  ...
2014-12-14 16:10:09 -08:00

511 lines
15 KiB
C

/*
* max77686.c - Regulator driver for the Maxim 77686
*
* Copyright (C) 2012 Samsung Electronics
* Chiwoong Byun <woong.byun@smasung.com>
* Jonghwa Lee <jonghwa3.lee@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* This driver is based on max8997.c
*/
#include <linux/kernel.h>
#include <linux/bug.h>
#include <linux/err.h>
#include <linux/gpio.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/of_regulator.h>
#include <linux/mfd/max77686.h>
#include <linux/mfd/max77686-private.h>
#define MAX77686_LDO_MINUV 800000
#define MAX77686_LDO_UVSTEP 50000
#define MAX77686_LDO_LOW_MINUV 800000
#define MAX77686_LDO_LOW_UVSTEP 25000
#define MAX77686_BUCK_MINUV 750000
#define MAX77686_BUCK_UVSTEP 50000
#define MAX77686_RAMP_DELAY 100000 /* uV/us */
#define MAX77686_DVS_RAMP_DELAY 27500 /* uV/us */
#define MAX77686_DVS_MINUV 600000
#define MAX77686_DVS_UVSTEP 12500
/*
* Values used for configuring LDOs and bucks.
* Forcing low power mode: LDO1, 3-5, 9, 13, 17-26
*/
#define MAX77686_LDO_LOWPOWER 0x1
/*
* On/off controlled by PWRREQ:
* - LDO2, 6-8, 10-12, 14-16
* - buck[1234]
*/
#define MAX77686_OFF_PWRREQ 0x1
/* Low power mode controlled by PWRREQ: All LDOs */
#define MAX77686_LDO_LOWPOWER_PWRREQ 0x2
/* Forcing low power mode: buck[234] */
#define MAX77686_BUCK_LOWPOWER 0x2
#define MAX77686_NORMAL 0x3
#define MAX77686_OPMODE_SHIFT 6
#define MAX77686_OPMODE_BUCK234_SHIFT 4
#define MAX77686_OPMODE_MASK 0x3
#define MAX77686_VSEL_MASK 0x3F
#define MAX77686_DVS_VSEL_MASK 0xFF
#define MAX77686_RAMP_RATE_MASK 0xC0
#define MAX77686_REGULATORS MAX77686_REG_MAX
#define MAX77686_LDOS 26
enum max77686_ramp_rate {
RAMP_RATE_13P75MV,
RAMP_RATE_27P5MV,
RAMP_RATE_55MV,
RAMP_RATE_NO_CTRL, /* 100mV/us */
};
struct max77686_data {
/* Array indexed by regulator id */
unsigned int opmode[MAX77686_REGULATORS];
};
static unsigned int max77686_get_opmode_shift(int id)
{
switch (id) {
case MAX77686_BUCK1:
case MAX77686_BUCK5 ... MAX77686_BUCK9:
return 0;
case MAX77686_BUCK2 ... MAX77686_BUCK4:
return MAX77686_OPMODE_BUCK234_SHIFT;
default:
/* all LDOs */
return MAX77686_OPMODE_SHIFT;
}
}
/* Some BUCKs and LDOs supports Normal[ON/OFF] mode during suspend */
static int max77686_set_suspend_disable(struct regulator_dev *rdev)
{
unsigned int val, shift;
struct max77686_data *max77686 = rdev_get_drvdata(rdev);
int ret, id = rdev_get_id(rdev);
shift = max77686_get_opmode_shift(id);
val = MAX77686_OFF_PWRREQ;
ret = regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
rdev->desc->enable_mask, val << shift);
if (ret)
return ret;
max77686->opmode[id] = val;
return 0;
}
/* Some LDOs supports [LPM/Normal]ON mode during suspend state */
static int max77686_set_suspend_mode(struct regulator_dev *rdev,
unsigned int mode)
{
struct max77686_data *max77686 = rdev_get_drvdata(rdev);
unsigned int val;
int ret, id = rdev_get_id(rdev);
/* BUCK[5-9] doesn't support this feature */
if (id >= MAX77686_BUCK5)
return 0;
switch (mode) {
case REGULATOR_MODE_IDLE: /* ON in LP Mode */
val = MAX77686_LDO_LOWPOWER_PWRREQ;
break;
case REGULATOR_MODE_NORMAL: /* ON in Normal Mode */
val = MAX77686_NORMAL;
break;
default:
pr_warn("%s: regulator_suspend_mode : 0x%x not supported\n",
rdev->desc->name, mode);
return -EINVAL;
}
ret = regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
rdev->desc->enable_mask,
val << MAX77686_OPMODE_SHIFT);
if (ret)
return ret;
max77686->opmode[id] = val;
return 0;
}
/* Some LDOs supports LPM-ON/OFF/Normal-ON mode during suspend state */
static int max77686_ldo_set_suspend_mode(struct regulator_dev *rdev,
unsigned int mode)
{
unsigned int val;
struct max77686_data *max77686 = rdev_get_drvdata(rdev);
int ret;
switch (mode) {
case REGULATOR_MODE_STANDBY: /* switch off */
val = MAX77686_OFF_PWRREQ;
break;
case REGULATOR_MODE_IDLE: /* ON in LP Mode */
val = MAX77686_LDO_LOWPOWER_PWRREQ;
break;
case REGULATOR_MODE_NORMAL: /* ON in Normal Mode */
val = MAX77686_NORMAL;
break;
default:
pr_warn("%s: regulator_suspend_mode : 0x%x not supported\n",
rdev->desc->name, mode);
return -EINVAL;
}
ret = regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
rdev->desc->enable_mask,
val << MAX77686_OPMODE_SHIFT);
if (ret)
return ret;
max77686->opmode[rdev_get_id(rdev)] = val;
return 0;
}
static int max77686_enable(struct regulator_dev *rdev)
{
struct max77686_data *max77686 = rdev_get_drvdata(rdev);
unsigned int shift;
int id = rdev_get_id(rdev);
shift = max77686_get_opmode_shift(id);
if (max77686->opmode[id] == MAX77686_OFF_PWRREQ)
max77686->opmode[id] = MAX77686_NORMAL;
return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
rdev->desc->enable_mask,
max77686->opmode[id] << shift);
}
static int max77686_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
{
unsigned int ramp_value = RAMP_RATE_NO_CTRL;
switch (ramp_delay) {
case 1 ... 13750:
ramp_value = RAMP_RATE_13P75MV;
break;
case 13751 ... 27500:
ramp_value = RAMP_RATE_27P5MV;
break;
case 27501 ... 55000:
ramp_value = RAMP_RATE_55MV;
break;
case 55001 ... 100000:
break;
default:
pr_warn("%s: ramp_delay: %d not supported, setting 100000\n",
rdev->desc->name, ramp_delay);
}
return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
MAX77686_RAMP_RATE_MASK, ramp_value << 6);
}
static struct regulator_ops max77686_ops = {
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
.is_enabled = regulator_is_enabled_regmap,
.enable = max77686_enable,
.disable = regulator_disable_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
.set_suspend_mode = max77686_set_suspend_mode,
};
static struct regulator_ops max77686_ldo_ops = {
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
.is_enabled = regulator_is_enabled_regmap,
.enable = max77686_enable,
.disable = regulator_disable_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
.set_suspend_mode = max77686_ldo_set_suspend_mode,
.set_suspend_disable = max77686_set_suspend_disable,
};
static struct regulator_ops max77686_buck1_ops = {
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
.is_enabled = regulator_is_enabled_regmap,
.enable = max77686_enable,
.disable = regulator_disable_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
.set_suspend_disable = max77686_set_suspend_disable,
};
static struct regulator_ops max77686_buck_dvs_ops = {
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
.is_enabled = regulator_is_enabled_regmap,
.enable = max77686_enable,
.disable = regulator_disable_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
.set_ramp_delay = max77686_set_ramp_delay,
.set_suspend_disable = max77686_set_suspend_disable,
};
#define regulator_desc_ldo(num) { \
.name = "LDO"#num, \
.of_match = of_match_ptr("LDO"#num), \
.regulators_node = of_match_ptr("voltage-regulators"), \
.id = MAX77686_LDO##num, \
.ops = &max77686_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.min_uV = MAX77686_LDO_MINUV, \
.uV_step = MAX77686_LDO_UVSTEP, \
.ramp_delay = MAX77686_RAMP_DELAY, \
.n_voltages = MAX77686_VSEL_MASK + 1, \
.vsel_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \
.vsel_mask = MAX77686_VSEL_MASK, \
.enable_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \
.enable_mask = MAX77686_OPMODE_MASK \
<< MAX77686_OPMODE_SHIFT, \
}
#define regulator_desc_lpm_ldo(num) { \
.name = "LDO"#num, \
.of_match = of_match_ptr("LDO"#num), \
.regulators_node = of_match_ptr("voltage-regulators"), \
.id = MAX77686_LDO##num, \
.ops = &max77686_ldo_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.min_uV = MAX77686_LDO_MINUV, \
.uV_step = MAX77686_LDO_UVSTEP, \
.ramp_delay = MAX77686_RAMP_DELAY, \
.n_voltages = MAX77686_VSEL_MASK + 1, \
.vsel_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \
.vsel_mask = MAX77686_VSEL_MASK, \
.enable_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \
.enable_mask = MAX77686_OPMODE_MASK \
<< MAX77686_OPMODE_SHIFT, \
}
#define regulator_desc_ldo_low(num) { \
.name = "LDO"#num, \
.of_match = of_match_ptr("LDO"#num), \
.regulators_node = of_match_ptr("voltage-regulators"), \
.id = MAX77686_LDO##num, \
.ops = &max77686_ldo_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.min_uV = MAX77686_LDO_LOW_MINUV, \
.uV_step = MAX77686_LDO_LOW_UVSTEP, \
.ramp_delay = MAX77686_RAMP_DELAY, \
.n_voltages = MAX77686_VSEL_MASK + 1, \
.vsel_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \
.vsel_mask = MAX77686_VSEL_MASK, \
.enable_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \
.enable_mask = MAX77686_OPMODE_MASK \
<< MAX77686_OPMODE_SHIFT, \
}
#define regulator_desc_ldo1_low(num) { \
.name = "LDO"#num, \
.of_match = of_match_ptr("LDO"#num), \
.regulators_node = of_match_ptr("voltage-regulators"), \
.id = MAX77686_LDO##num, \
.ops = &max77686_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.min_uV = MAX77686_LDO_LOW_MINUV, \
.uV_step = MAX77686_LDO_LOW_UVSTEP, \
.ramp_delay = MAX77686_RAMP_DELAY, \
.n_voltages = MAX77686_VSEL_MASK + 1, \
.vsel_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \
.vsel_mask = MAX77686_VSEL_MASK, \
.enable_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \
.enable_mask = MAX77686_OPMODE_MASK \
<< MAX77686_OPMODE_SHIFT, \
}
#define regulator_desc_buck(num) { \
.name = "BUCK"#num, \
.of_match = of_match_ptr("BUCK"#num), \
.regulators_node = of_match_ptr("voltage-regulators"), \
.id = MAX77686_BUCK##num, \
.ops = &max77686_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.min_uV = MAX77686_BUCK_MINUV, \
.uV_step = MAX77686_BUCK_UVSTEP, \
.ramp_delay = MAX77686_RAMP_DELAY, \
.n_voltages = MAX77686_VSEL_MASK + 1, \
.vsel_reg = MAX77686_REG_BUCK5OUT + (num - 5) * 2, \
.vsel_mask = MAX77686_VSEL_MASK, \
.enable_reg = MAX77686_REG_BUCK5CTRL + (num - 5) * 2, \
.enable_mask = MAX77686_OPMODE_MASK, \
}
#define regulator_desc_buck1(num) { \
.name = "BUCK"#num, \
.of_match = of_match_ptr("BUCK"#num), \
.regulators_node = of_match_ptr("voltage-regulators"), \
.id = MAX77686_BUCK##num, \
.ops = &max77686_buck1_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.min_uV = MAX77686_BUCK_MINUV, \
.uV_step = MAX77686_BUCK_UVSTEP, \
.ramp_delay = MAX77686_RAMP_DELAY, \
.n_voltages = MAX77686_VSEL_MASK + 1, \
.vsel_reg = MAX77686_REG_BUCK1OUT, \
.vsel_mask = MAX77686_VSEL_MASK, \
.enable_reg = MAX77686_REG_BUCK1CTRL, \
.enable_mask = MAX77686_OPMODE_MASK, \
}
#define regulator_desc_buck_dvs(num) { \
.name = "BUCK"#num, \
.of_match = of_match_ptr("BUCK"#num), \
.regulators_node = of_match_ptr("voltage-regulators"), \
.id = MAX77686_BUCK##num, \
.ops = &max77686_buck_dvs_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.min_uV = MAX77686_DVS_MINUV, \
.uV_step = MAX77686_DVS_UVSTEP, \
.ramp_delay = MAX77686_DVS_RAMP_DELAY, \
.n_voltages = MAX77686_DVS_VSEL_MASK + 1, \
.vsel_reg = MAX77686_REG_BUCK2DVS1 + (num - 2) * 10, \
.vsel_mask = MAX77686_DVS_VSEL_MASK, \
.enable_reg = MAX77686_REG_BUCK2CTRL1 + (num - 2) * 10, \
.enable_mask = MAX77686_OPMODE_MASK \
<< MAX77686_OPMODE_BUCK234_SHIFT, \
}
static const struct regulator_desc regulators[] = {
regulator_desc_ldo1_low(1),
regulator_desc_ldo_low(2),
regulator_desc_ldo(3),
regulator_desc_ldo(4),
regulator_desc_ldo(5),
regulator_desc_ldo_low(6),
regulator_desc_ldo_low(7),
regulator_desc_ldo_low(8),
regulator_desc_ldo(9),
regulator_desc_lpm_ldo(10),
regulator_desc_lpm_ldo(11),
regulator_desc_lpm_ldo(12),
regulator_desc_ldo(13),
regulator_desc_lpm_ldo(14),
regulator_desc_ldo_low(15),
regulator_desc_lpm_ldo(16),
regulator_desc_ldo(17),
regulator_desc_ldo(18),
regulator_desc_ldo(19),
regulator_desc_ldo(20),
regulator_desc_ldo(21),
regulator_desc_ldo(22),
regulator_desc_ldo(23),
regulator_desc_ldo(24),
regulator_desc_ldo(25),
regulator_desc_ldo(26),
regulator_desc_buck1(1),
regulator_desc_buck_dvs(2),
regulator_desc_buck_dvs(3),
regulator_desc_buck_dvs(4),
regulator_desc_buck(5),
regulator_desc_buck(6),
regulator_desc_buck(7),
regulator_desc_buck(8),
regulator_desc_buck(9),
};
static int max77686_pmic_probe(struct platform_device *pdev)
{
struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent);
struct max77686_data *max77686;
int i;
struct regulator_config config = { };
dev_dbg(&pdev->dev, "%s\n", __func__);
max77686 = devm_kzalloc(&pdev->dev, sizeof(struct max77686_data),
GFP_KERNEL);
if (!max77686)
return -ENOMEM;
config.dev = iodev->dev;
config.regmap = iodev->regmap;
config.driver_data = max77686;
platform_set_drvdata(pdev, max77686);
for (i = 0; i < MAX77686_REGULATORS; i++) {
struct regulator_dev *rdev;
int id = regulators[i].id;
max77686->opmode[id] = MAX77686_NORMAL;
rdev = devm_regulator_register(&pdev->dev,
&regulators[i], &config);
if (IS_ERR(rdev)) {
int ret = PTR_ERR(rdev);
dev_err(&pdev->dev,
"regulator init failed for %d: %d\n", i, ret);
return ret;
}
}
return 0;
}
static const struct platform_device_id max77686_pmic_id[] = {
{"max77686-pmic", 0},
{ },
};
MODULE_DEVICE_TABLE(platform, max77686_pmic_id);
static struct platform_driver max77686_pmic_driver = {
.driver = {
.name = "max77686-pmic",
},
.probe = max77686_pmic_probe,
.id_table = max77686_pmic_id,
};
static int __init max77686_pmic_init(void)
{
return platform_driver_register(&max77686_pmic_driver);
}
subsys_initcall(max77686_pmic_init);
static void __exit max77686_pmic_cleanup(void)
{
platform_driver_unregister(&max77686_pmic_driver);
}
module_exit(max77686_pmic_cleanup);
MODULE_DESCRIPTION("MAXIM 77686 Regulator Driver");
MODULE_AUTHOR("Chiwoong Byun <woong.byun@samsung.com>");
MODULE_LICENSE("GPL");