mirror of
https://github.com/torvalds/linux.git
synced 2024-11-11 06:31:49 +00:00
b4178ab58a
paride_register() returns 1 on success, 0 on failure and module init
code looks like
static int __init foo_init(void)
{
return paride_register(&foo) - 1;
}
which is not what one get used to. Converted to usual 0/-E convention.
In case of kbic driver, unwind registration. It was just
return (paride_register(&k951)||paride_register(&k971))-1;
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
314 lines
7.3 KiB
C
314 lines
7.3 KiB
C
/*
|
|
frpw.c (c) 1996-8 Grant R. Guenther <grant@torque.net>
|
|
Under the terms of the GNU General Public License
|
|
|
|
frpw.c is a low-level protocol driver for the Freecom "Power"
|
|
parallel port IDE adapter.
|
|
|
|
Some applications of this adapter may require a "printer" reset
|
|
prior to loading the driver. This can be done by loading and
|
|
unloading the "lp" driver, or it can be done by this driver
|
|
if you define FRPW_HARD_RESET. The latter is not recommended
|
|
as it may upset devices on other ports.
|
|
|
|
*/
|
|
|
|
/* Changes:
|
|
|
|
1.01 GRG 1998.05.06 init_proto, release_proto
|
|
fix chip detect
|
|
added EPP-16 and EPP-32
|
|
1.02 GRG 1998.09.23 added hard reset to initialisation process
|
|
1.03 GRG 1998.12.14 made hard reset conditional
|
|
|
|
*/
|
|
|
|
#define FRPW_VERSION "1.03"
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/types.h>
|
|
#include <linux/wait.h>
|
|
#include <asm/io.h>
|
|
|
|
#include "paride.h"
|
|
|
|
#define cec4 w2(0xc);w2(0xe);w2(0xe);w2(0xc);w2(4);w2(4);w2(4);
|
|
#define j44(l,h) (((l>>4)&0x0f)|(h&0xf0))
|
|
|
|
/* cont = 0 - access the IDE register file
|
|
cont = 1 - access the IDE command set
|
|
*/
|
|
|
|
static int cont_map[2] = { 0x08, 0x10 };
|
|
|
|
static int frpw_read_regr( PIA *pi, int cont, int regr )
|
|
|
|
{ int h,l,r;
|
|
|
|
r = regr + cont_map[cont];
|
|
|
|
w2(4);
|
|
w0(r); cec4;
|
|
w2(6); l = r1();
|
|
w2(4); h = r1();
|
|
w2(4);
|
|
|
|
return j44(l,h);
|
|
|
|
}
|
|
|
|
static void frpw_write_regr( PIA *pi, int cont, int regr, int val)
|
|
|
|
{ int r;
|
|
|
|
r = regr + cont_map[cont];
|
|
|
|
w2(4); w0(r); cec4;
|
|
w0(val);
|
|
w2(5);w2(7);w2(5);w2(4);
|
|
}
|
|
|
|
static void frpw_read_block_int( PIA *pi, char * buf, int count, int regr )
|
|
|
|
{ int h, l, k, ph;
|
|
|
|
switch(pi->mode) {
|
|
|
|
case 0: w2(4); w0(regr); cec4;
|
|
for (k=0;k<count;k++) {
|
|
w2(6); l = r1();
|
|
w2(4); h = r1();
|
|
buf[k] = j44(l,h);
|
|
}
|
|
w2(4);
|
|
break;
|
|
|
|
case 1: ph = 2;
|
|
w2(4); w0(regr + 0xc0); cec4;
|
|
w0(0xff);
|
|
for (k=0;k<count;k++) {
|
|
w2(0xa4 + ph);
|
|
buf[k] = r0();
|
|
ph = 2 - ph;
|
|
}
|
|
w2(0xac); w2(0xa4); w2(4);
|
|
break;
|
|
|
|
case 2: w2(4); w0(regr + 0x80); cec4;
|
|
for (k=0;k<count;k++) buf[k] = r4();
|
|
w2(0xac); w2(0xa4);
|
|
w2(4);
|
|
break;
|
|
|
|
case 3: w2(4); w0(regr + 0x80); cec4;
|
|
for (k=0;k<count-2;k++) buf[k] = r4();
|
|
w2(0xac); w2(0xa4);
|
|
buf[count-2] = r4();
|
|
buf[count-1] = r4();
|
|
w2(4);
|
|
break;
|
|
|
|
case 4: w2(4); w0(regr + 0x80); cec4;
|
|
for (k=0;k<(count/2)-1;k++) ((u16 *)buf)[k] = r4w();
|
|
w2(0xac); w2(0xa4);
|
|
buf[count-2] = r4();
|
|
buf[count-1] = r4();
|
|
w2(4);
|
|
break;
|
|
|
|
case 5: w2(4); w0(regr + 0x80); cec4;
|
|
for (k=0;k<(count/4)-1;k++) ((u32 *)buf)[k] = r4l();
|
|
buf[count-4] = r4();
|
|
buf[count-3] = r4();
|
|
w2(0xac); w2(0xa4);
|
|
buf[count-2] = r4();
|
|
buf[count-1] = r4();
|
|
w2(4);
|
|
break;
|
|
|
|
}
|
|
}
|
|
|
|
static void frpw_read_block( PIA *pi, char * buf, int count)
|
|
|
|
{ frpw_read_block_int(pi,buf,count,0x08);
|
|
}
|
|
|
|
static void frpw_write_block( PIA *pi, char * buf, int count )
|
|
|
|
{ int k;
|
|
|
|
switch(pi->mode) {
|
|
|
|
case 0:
|
|
case 1:
|
|
case 2: w2(4); w0(8); cec4; w2(5);
|
|
for (k=0;k<count;k++) {
|
|
w0(buf[k]);
|
|
w2(7);w2(5);
|
|
}
|
|
w2(4);
|
|
break;
|
|
|
|
case 3: w2(4); w0(0xc8); cec4; w2(5);
|
|
for (k=0;k<count;k++) w4(buf[k]);
|
|
w2(4);
|
|
break;
|
|
|
|
case 4: w2(4); w0(0xc8); cec4; w2(5);
|
|
for (k=0;k<count/2;k++) w4w(((u16 *)buf)[k]);
|
|
w2(4);
|
|
break;
|
|
|
|
case 5: w2(4); w0(0xc8); cec4; w2(5);
|
|
for (k=0;k<count/4;k++) w4l(((u32 *)buf)[k]);
|
|
w2(4);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void frpw_connect ( PIA *pi )
|
|
|
|
{ pi->saved_r0 = r0();
|
|
pi->saved_r2 = r2();
|
|
w2(4);
|
|
}
|
|
|
|
static void frpw_disconnect ( PIA *pi )
|
|
|
|
{ w2(4); w0(0x20); cec4;
|
|
w0(pi->saved_r0);
|
|
w2(pi->saved_r2);
|
|
}
|
|
|
|
/* Stub logic to see if PNP string is available - used to distinguish
|
|
between the Xilinx and ASIC implementations of the Freecom adapter.
|
|
*/
|
|
|
|
static int frpw_test_pnp ( PIA *pi )
|
|
|
|
/* returns chip_type: 0 = Xilinx, 1 = ASIC */
|
|
|
|
{ int olddelay, a, b;
|
|
|
|
#ifdef FRPW_HARD_RESET
|
|
w0(0); w2(8); udelay(50); w2(0xc); /* parallel bus reset */
|
|
mdelay(1500);
|
|
#endif
|
|
|
|
olddelay = pi->delay;
|
|
pi->delay = 10;
|
|
|
|
pi->saved_r0 = r0();
|
|
pi->saved_r2 = r2();
|
|
|
|
w2(4); w0(4); w2(6); w2(7);
|
|
a = r1() & 0xff; w2(4); b = r1() & 0xff;
|
|
w2(0xc); w2(0xe); w2(4);
|
|
|
|
pi->delay = olddelay;
|
|
w0(pi->saved_r0);
|
|
w2(pi->saved_r2);
|
|
|
|
return ((~a&0x40) && (b&0x40));
|
|
}
|
|
|
|
/* We use the pi->private to remember the result of the PNP test.
|
|
To make this work, private = port*2 + chip. Yes, I know it's
|
|
a hack :-(
|
|
*/
|
|
|
|
static int frpw_test_proto( PIA *pi, char * scratch, int verbose )
|
|
|
|
{ int j, k, r;
|
|
int e[2] = {0,0};
|
|
|
|
if ((pi->private>>1) != pi->port)
|
|
pi->private = frpw_test_pnp(pi) + 2*pi->port;
|
|
|
|
if (((pi->private%2) == 0) && (pi->mode > 2)) {
|
|
if (verbose)
|
|
printk("%s: frpw: Xilinx does not support mode %d\n",
|
|
pi->device, pi->mode);
|
|
return 1;
|
|
}
|
|
|
|
if (((pi->private%2) == 1) && (pi->mode == 2)) {
|
|
if (verbose)
|
|
printk("%s: frpw: ASIC does not support mode 2\n",
|
|
pi->device);
|
|
return 1;
|
|
}
|
|
|
|
frpw_connect(pi);
|
|
for (j=0;j<2;j++) {
|
|
frpw_write_regr(pi,0,6,0xa0+j*0x10);
|
|
for (k=0;k<256;k++) {
|
|
frpw_write_regr(pi,0,2,k^0xaa);
|
|
frpw_write_regr(pi,0,3,k^0x55);
|
|
if (frpw_read_regr(pi,0,2) != (k^0xaa)) e[j]++;
|
|
}
|
|
}
|
|
frpw_disconnect(pi);
|
|
|
|
frpw_connect(pi);
|
|
frpw_read_block_int(pi,scratch,512,0x10);
|
|
r = 0;
|
|
for (k=0;k<128;k++) if (scratch[k] != k) r++;
|
|
frpw_disconnect(pi);
|
|
|
|
if (verbose) {
|
|
printk("%s: frpw: port 0x%x, chip %ld, mode %d, test=(%d,%d,%d)\n",
|
|
pi->device,pi->port,(pi->private%2),pi->mode,e[0],e[1],r);
|
|
}
|
|
|
|
return (r || (e[0] && e[1]));
|
|
}
|
|
|
|
|
|
static void frpw_log_adapter( PIA *pi, char * scratch, int verbose )
|
|
|
|
{ char *mode_string[6] = {"4-bit","8-bit","EPP",
|
|
"EPP-8","EPP-16","EPP-32"};
|
|
|
|
printk("%s: frpw %s, Freecom (%s) adapter at 0x%x, ", pi->device,
|
|
FRPW_VERSION,((pi->private%2) == 0)?"Xilinx":"ASIC",pi->port);
|
|
printk("mode %d (%s), delay %d\n",pi->mode,
|
|
mode_string[pi->mode],pi->delay);
|
|
|
|
}
|
|
|
|
static struct pi_protocol frpw = {
|
|
.owner = THIS_MODULE,
|
|
.name = "frpw",
|
|
.max_mode = 6,
|
|
.epp_first = 2,
|
|
.default_delay = 2,
|
|
.max_units = 1,
|
|
.write_regr = frpw_write_regr,
|
|
.read_regr = frpw_read_regr,
|
|
.write_block = frpw_write_block,
|
|
.read_block = frpw_read_block,
|
|
.connect = frpw_connect,
|
|
.disconnect = frpw_disconnect,
|
|
.test_proto = frpw_test_proto,
|
|
.log_adapter = frpw_log_adapter,
|
|
};
|
|
|
|
static int __init frpw_init(void)
|
|
{
|
|
return paride_register(&frpw);
|
|
}
|
|
|
|
static void __exit frpw_exit(void)
|
|
{
|
|
paride_unregister(&frpw);
|
|
}
|
|
|
|
MODULE_LICENSE("GPL");
|
|
module_init(frpw_init)
|
|
module_exit(frpw_exit)
|