linux/drivers/md/md-multipath.c
Christoph Hellwig 21cf866145 writeback: remove bdi->congested_fn
Except for pktdvd, the only places setting congested bits are file
systems that allocate their own backing_dev_info structures.  And
pktdvd is a deprecated driver that isn't useful in stack setup
either.  So remove the dead congested_fn stacking infrastructure.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Song Liu <song@kernel.org>
Acked-by: David Sterba <dsterba@suse.com>
[axboe: fixup unused variables in bcache/request.c]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-08 17:20:46 -06:00

478 lines
12 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* multipath.c : Multiple Devices driver for Linux
*
* Copyright (C) 1999, 2000, 2001 Ingo Molnar, Red Hat
*
* Copyright (C) 1996, 1997, 1998 Ingo Molnar, Miguel de Icaza, Gadi Oxman
*
* MULTIPATH management functions.
*
* derived from raid1.c.
*/
#include <linux/blkdev.h>
#include <linux/module.h>
#include <linux/raid/md_u.h>
#include <linux/seq_file.h>
#include <linux/slab.h>
#include "md.h"
#include "md-multipath.h"
#define MAX_WORK_PER_DISK 128
#define NR_RESERVED_BUFS 32
static int multipath_map (struct mpconf *conf)
{
int i, disks = conf->raid_disks;
/*
* Later we do read balancing on the read side
* now we use the first available disk.
*/
rcu_read_lock();
for (i = 0; i < disks; i++) {
struct md_rdev *rdev = rcu_dereference(conf->multipaths[i].rdev);
if (rdev && test_bit(In_sync, &rdev->flags) &&
!test_bit(Faulty, &rdev->flags)) {
atomic_inc(&rdev->nr_pending);
rcu_read_unlock();
return i;
}
}
rcu_read_unlock();
pr_crit_ratelimited("multipath_map(): no more operational IO paths?\n");
return (-1);
}
static void multipath_reschedule_retry (struct multipath_bh *mp_bh)
{
unsigned long flags;
struct mddev *mddev = mp_bh->mddev;
struct mpconf *conf = mddev->private;
spin_lock_irqsave(&conf->device_lock, flags);
list_add(&mp_bh->retry_list, &conf->retry_list);
spin_unlock_irqrestore(&conf->device_lock, flags);
md_wakeup_thread(mddev->thread);
}
/*
* multipath_end_bh_io() is called when we have finished servicing a multipathed
* operation and are ready to return a success/failure code to the buffer
* cache layer.
*/
static void multipath_end_bh_io(struct multipath_bh *mp_bh, blk_status_t status)
{
struct bio *bio = mp_bh->master_bio;
struct mpconf *conf = mp_bh->mddev->private;
bio->bi_status = status;
bio_endio(bio);
mempool_free(mp_bh, &conf->pool);
}
static void multipath_end_request(struct bio *bio)
{
struct multipath_bh *mp_bh = bio->bi_private;
struct mpconf *conf = mp_bh->mddev->private;
struct md_rdev *rdev = conf->multipaths[mp_bh->path].rdev;
if (!bio->bi_status)
multipath_end_bh_io(mp_bh, 0);
else if (!(bio->bi_opf & REQ_RAHEAD)) {
/*
* oops, IO error:
*/
char b[BDEVNAME_SIZE];
md_error (mp_bh->mddev, rdev);
pr_info("multipath: %s: rescheduling sector %llu\n",
bdevname(rdev->bdev,b),
(unsigned long long)bio->bi_iter.bi_sector);
multipath_reschedule_retry(mp_bh);
} else
multipath_end_bh_io(mp_bh, bio->bi_status);
rdev_dec_pending(rdev, conf->mddev);
}
static bool multipath_make_request(struct mddev *mddev, struct bio * bio)
{
struct mpconf *conf = mddev->private;
struct multipath_bh * mp_bh;
struct multipath_info *multipath;
if (unlikely(bio->bi_opf & REQ_PREFLUSH)
&& md_flush_request(mddev, bio))
return true;
mp_bh = mempool_alloc(&conf->pool, GFP_NOIO);
mp_bh->master_bio = bio;
mp_bh->mddev = mddev;
mp_bh->path = multipath_map(conf);
if (mp_bh->path < 0) {
bio_io_error(bio);
mempool_free(mp_bh, &conf->pool);
return true;
}
multipath = conf->multipaths + mp_bh->path;
bio_init(&mp_bh->bio, NULL, 0);
__bio_clone_fast(&mp_bh->bio, bio);
mp_bh->bio.bi_iter.bi_sector += multipath->rdev->data_offset;
bio_set_dev(&mp_bh->bio, multipath->rdev->bdev);
mp_bh->bio.bi_opf |= REQ_FAILFAST_TRANSPORT;
mp_bh->bio.bi_end_io = multipath_end_request;
mp_bh->bio.bi_private = mp_bh;
mddev_check_writesame(mddev, &mp_bh->bio);
mddev_check_write_zeroes(mddev, &mp_bh->bio);
submit_bio_noacct(&mp_bh->bio);
return true;
}
static void multipath_status(struct seq_file *seq, struct mddev *mddev)
{
struct mpconf *conf = mddev->private;
int i;
seq_printf (seq, " [%d/%d] [", conf->raid_disks,
conf->raid_disks - mddev->degraded);
rcu_read_lock();
for (i = 0; i < conf->raid_disks; i++) {
struct md_rdev *rdev = rcu_dereference(conf->multipaths[i].rdev);
seq_printf (seq, "%s", rdev && test_bit(In_sync, &rdev->flags) ? "U" : "_");
}
rcu_read_unlock();
seq_putc(seq, ']');
}
/*
* Careful, this can execute in IRQ contexts as well!
*/
static void multipath_error (struct mddev *mddev, struct md_rdev *rdev)
{
struct mpconf *conf = mddev->private;
char b[BDEVNAME_SIZE];
if (conf->raid_disks - mddev->degraded <= 1) {
/*
* Uh oh, we can do nothing if this is our last path, but
* first check if this is a queued request for a device
* which has just failed.
*/
pr_warn("multipath: only one IO path left and IO error.\n");
/* leave it active... it's all we have */
return;
}
/*
* Mark disk as unusable
*/
if (test_and_clear_bit(In_sync, &rdev->flags)) {
unsigned long flags;
spin_lock_irqsave(&conf->device_lock, flags);
mddev->degraded++;
spin_unlock_irqrestore(&conf->device_lock, flags);
}
set_bit(Faulty, &rdev->flags);
set_bit(MD_SB_CHANGE_DEVS, &mddev->sb_flags);
pr_err("multipath: IO failure on %s, disabling IO path.\n"
"multipath: Operation continuing on %d IO paths.\n",
bdevname(rdev->bdev, b),
conf->raid_disks - mddev->degraded);
}
static void print_multipath_conf (struct mpconf *conf)
{
int i;
struct multipath_info *tmp;
pr_debug("MULTIPATH conf printout:\n");
if (!conf) {
pr_debug("(conf==NULL)\n");
return;
}
pr_debug(" --- wd:%d rd:%d\n", conf->raid_disks - conf->mddev->degraded,
conf->raid_disks);
for (i = 0; i < conf->raid_disks; i++) {
char b[BDEVNAME_SIZE];
tmp = conf->multipaths + i;
if (tmp->rdev)
pr_debug(" disk%d, o:%d, dev:%s\n",
i,!test_bit(Faulty, &tmp->rdev->flags),
bdevname(tmp->rdev->bdev,b));
}
}
static int multipath_add_disk(struct mddev *mddev, struct md_rdev *rdev)
{
struct mpconf *conf = mddev->private;
int err = -EEXIST;
int path;
struct multipath_info *p;
int first = 0;
int last = mddev->raid_disks - 1;
if (rdev->raid_disk >= 0)
first = last = rdev->raid_disk;
print_multipath_conf(conf);
for (path = first; path <= last; path++)
if ((p=conf->multipaths+path)->rdev == NULL) {
disk_stack_limits(mddev->gendisk, rdev->bdev,
rdev->data_offset << 9);
err = md_integrity_add_rdev(rdev, mddev);
if (err)
break;
spin_lock_irq(&conf->device_lock);
mddev->degraded--;
rdev->raid_disk = path;
set_bit(In_sync, &rdev->flags);
spin_unlock_irq(&conf->device_lock);
rcu_assign_pointer(p->rdev, rdev);
err = 0;
break;
}
print_multipath_conf(conf);
return err;
}
static int multipath_remove_disk(struct mddev *mddev, struct md_rdev *rdev)
{
struct mpconf *conf = mddev->private;
int err = 0;
int number = rdev->raid_disk;
struct multipath_info *p = conf->multipaths + number;
print_multipath_conf(conf);
if (rdev == p->rdev) {
if (test_bit(In_sync, &rdev->flags) ||
atomic_read(&rdev->nr_pending)) {
pr_warn("hot-remove-disk, slot %d is identified but is still operational!\n", number);
err = -EBUSY;
goto abort;
}
p->rdev = NULL;
if (!test_bit(RemoveSynchronized, &rdev->flags)) {
synchronize_rcu();
if (atomic_read(&rdev->nr_pending)) {
/* lost the race, try later */
err = -EBUSY;
p->rdev = rdev;
goto abort;
}
}
err = md_integrity_register(mddev);
}
abort:
print_multipath_conf(conf);
return err;
}
/*
* This is a kernel thread which:
*
* 1. Retries failed read operations on working multipaths.
* 2. Updates the raid superblock when problems encounter.
* 3. Performs writes following reads for array syncronising.
*/
static void multipathd(struct md_thread *thread)
{
struct mddev *mddev = thread->mddev;
struct multipath_bh *mp_bh;
struct bio *bio;
unsigned long flags;
struct mpconf *conf = mddev->private;
struct list_head *head = &conf->retry_list;
md_check_recovery(mddev);
for (;;) {
char b[BDEVNAME_SIZE];
spin_lock_irqsave(&conf->device_lock, flags);
if (list_empty(head))
break;
mp_bh = list_entry(head->prev, struct multipath_bh, retry_list);
list_del(head->prev);
spin_unlock_irqrestore(&conf->device_lock, flags);
bio = &mp_bh->bio;
bio->bi_iter.bi_sector = mp_bh->master_bio->bi_iter.bi_sector;
if ((mp_bh->path = multipath_map (conf))<0) {
pr_err("multipath: %s: unrecoverable IO read error for block %llu\n",
bio_devname(bio, b),
(unsigned long long)bio->bi_iter.bi_sector);
multipath_end_bh_io(mp_bh, BLK_STS_IOERR);
} else {
pr_err("multipath: %s: redirecting sector %llu to another IO path\n",
bio_devname(bio, b),
(unsigned long long)bio->bi_iter.bi_sector);
*bio = *(mp_bh->master_bio);
bio->bi_iter.bi_sector +=
conf->multipaths[mp_bh->path].rdev->data_offset;
bio_set_dev(bio, conf->multipaths[mp_bh->path].rdev->bdev);
bio->bi_opf |= REQ_FAILFAST_TRANSPORT;
bio->bi_end_io = multipath_end_request;
bio->bi_private = mp_bh;
submit_bio_noacct(bio);
}
}
spin_unlock_irqrestore(&conf->device_lock, flags);
}
static sector_t multipath_size(struct mddev *mddev, sector_t sectors, int raid_disks)
{
WARN_ONCE(sectors || raid_disks,
"%s does not support generic reshape\n", __func__);
return mddev->dev_sectors;
}
static int multipath_run (struct mddev *mddev)
{
struct mpconf *conf;
int disk_idx;
struct multipath_info *disk;
struct md_rdev *rdev;
int working_disks;
int ret;
if (md_check_no_bitmap(mddev))
return -EINVAL;
if (mddev->level != LEVEL_MULTIPATH) {
pr_warn("multipath: %s: raid level not set to multipath IO (%d)\n",
mdname(mddev), mddev->level);
goto out;
}
/*
* copy the already verified devices into our private MULTIPATH
* bookkeeping area. [whatever we allocate in multipath_run(),
* should be freed in multipath_free()]
*/
conf = kzalloc(sizeof(struct mpconf), GFP_KERNEL);
mddev->private = conf;
if (!conf)
goto out;
conf->multipaths = kcalloc(mddev->raid_disks,
sizeof(struct multipath_info),
GFP_KERNEL);
if (!conf->multipaths)
goto out_free_conf;
working_disks = 0;
rdev_for_each(rdev, mddev) {
disk_idx = rdev->raid_disk;
if (disk_idx < 0 ||
disk_idx >= mddev->raid_disks)
continue;
disk = conf->multipaths + disk_idx;
disk->rdev = rdev;
disk_stack_limits(mddev->gendisk, rdev->bdev,
rdev->data_offset << 9);
if (!test_bit(Faulty, &rdev->flags))
working_disks++;
}
conf->raid_disks = mddev->raid_disks;
conf->mddev = mddev;
spin_lock_init(&conf->device_lock);
INIT_LIST_HEAD(&conf->retry_list);
if (!working_disks) {
pr_warn("multipath: no operational IO paths for %s\n",
mdname(mddev));
goto out_free_conf;
}
mddev->degraded = conf->raid_disks - working_disks;
ret = mempool_init_kmalloc_pool(&conf->pool, NR_RESERVED_BUFS,
sizeof(struct multipath_bh));
if (ret)
goto out_free_conf;
mddev->thread = md_register_thread(multipathd, mddev,
"multipath");
if (!mddev->thread)
goto out_free_conf;
pr_info("multipath: array %s active with %d out of %d IO paths\n",
mdname(mddev), conf->raid_disks - mddev->degraded,
mddev->raid_disks);
/*
* Ok, everything is just fine now
*/
md_set_array_sectors(mddev, multipath_size(mddev, 0, 0));
if (md_integrity_register(mddev))
goto out_free_conf;
return 0;
out_free_conf:
mempool_exit(&conf->pool);
kfree(conf->multipaths);
kfree(conf);
mddev->private = NULL;
out:
return -EIO;
}
static void multipath_free(struct mddev *mddev, void *priv)
{
struct mpconf *conf = priv;
mempool_exit(&conf->pool);
kfree(conf->multipaths);
kfree(conf);
}
static struct md_personality multipath_personality =
{
.name = "multipath",
.level = LEVEL_MULTIPATH,
.owner = THIS_MODULE,
.make_request = multipath_make_request,
.run = multipath_run,
.free = multipath_free,
.status = multipath_status,
.error_handler = multipath_error,
.hot_add_disk = multipath_add_disk,
.hot_remove_disk= multipath_remove_disk,
.size = multipath_size,
};
static int __init multipath_init (void)
{
return register_md_personality (&multipath_personality);
}
static void __exit multipath_exit (void)
{
unregister_md_personality (&multipath_personality);
}
module_init(multipath_init);
module_exit(multipath_exit);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("simple multi-path personality for MD");
MODULE_ALIAS("md-personality-7"); /* MULTIPATH */
MODULE_ALIAS("md-multipath");
MODULE_ALIAS("md-level--4");