mirror of
https://github.com/torvalds/linux.git
synced 2024-11-16 00:52:01 +00:00
db5824dd3d
This patch removes the code which disables 100Mbps advertising when the ks8842 is accessed via timberdale. At higher speed it's good to be nice to the internal state machine of timberdale by acking interrupts. That is done by a write to the interrupt ack register (IAR). Signed-off-by: Richard Röjfors <richard.rojfors@pelagicore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
862 lines
22 KiB
C
862 lines
22 KiB
C
/*
|
|
* ks8842.c timberdale KS8842 ethernet driver
|
|
* Copyright (c) 2009 Intel Corporation
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
/* Supports:
|
|
* The Micrel KS8842 behind the timberdale FPGA
|
|
* The genuine Micrel KS8841/42 device with ISA 16/32bit bus interface
|
|
*/
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/ks8842.h>
|
|
|
|
#define DRV_NAME "ks8842"
|
|
|
|
/* Timberdale specific Registers */
|
|
#define REG_TIMB_RST 0x1c
|
|
#define REG_TIMB_FIFO 0x20
|
|
#define REG_TIMB_ISR 0x24
|
|
#define REG_TIMB_IER 0x28
|
|
#define REG_TIMB_IAR 0x2C
|
|
#define REQ_TIMB_DMA_RESUME 0x30
|
|
|
|
/* KS8842 registers */
|
|
|
|
#define REG_SELECT_BANK 0x0e
|
|
|
|
/* bank 0 registers */
|
|
#define REG_QRFCR 0x04
|
|
|
|
/* bank 2 registers */
|
|
#define REG_MARL 0x00
|
|
#define REG_MARM 0x02
|
|
#define REG_MARH 0x04
|
|
|
|
/* bank 3 registers */
|
|
#define REG_GRR 0x06
|
|
|
|
/* bank 16 registers */
|
|
#define REG_TXCR 0x00
|
|
#define REG_TXSR 0x02
|
|
#define REG_RXCR 0x04
|
|
#define REG_TXMIR 0x08
|
|
#define REG_RXMIR 0x0A
|
|
|
|
/* bank 17 registers */
|
|
#define REG_TXQCR 0x00
|
|
#define REG_RXQCR 0x02
|
|
#define REG_TXFDPR 0x04
|
|
#define REG_RXFDPR 0x06
|
|
#define REG_QMU_DATA_LO 0x08
|
|
#define REG_QMU_DATA_HI 0x0A
|
|
|
|
/* bank 18 registers */
|
|
#define REG_IER 0x00
|
|
#define IRQ_LINK_CHANGE 0x8000
|
|
#define IRQ_TX 0x4000
|
|
#define IRQ_RX 0x2000
|
|
#define IRQ_RX_OVERRUN 0x0800
|
|
#define IRQ_TX_STOPPED 0x0200
|
|
#define IRQ_RX_STOPPED 0x0100
|
|
#define IRQ_RX_ERROR 0x0080
|
|
#define ENABLED_IRQS (IRQ_LINK_CHANGE | IRQ_TX | IRQ_RX | IRQ_RX_STOPPED | \
|
|
IRQ_TX_STOPPED | IRQ_RX_OVERRUN | IRQ_RX_ERROR)
|
|
#define REG_ISR 0x02
|
|
#define REG_RXSR 0x04
|
|
#define RXSR_VALID 0x8000
|
|
#define RXSR_BROADCAST 0x80
|
|
#define RXSR_MULTICAST 0x40
|
|
#define RXSR_UNICAST 0x20
|
|
#define RXSR_FRAMETYPE 0x08
|
|
#define RXSR_TOO_LONG 0x04
|
|
#define RXSR_RUNT 0x02
|
|
#define RXSR_CRC_ERROR 0x01
|
|
#define RXSR_ERROR (RXSR_TOO_LONG | RXSR_RUNT | RXSR_CRC_ERROR)
|
|
|
|
/* bank 32 registers */
|
|
#define REG_SW_ID_AND_ENABLE 0x00
|
|
#define REG_SGCR1 0x02
|
|
#define REG_SGCR2 0x04
|
|
#define REG_SGCR3 0x06
|
|
|
|
/* bank 39 registers */
|
|
#define REG_MACAR1 0x00
|
|
#define REG_MACAR2 0x02
|
|
#define REG_MACAR3 0x04
|
|
|
|
/* bank 45 registers */
|
|
#define REG_P1MBCR 0x00
|
|
#define REG_P1MBSR 0x02
|
|
|
|
/* bank 46 registers */
|
|
#define REG_P2MBCR 0x00
|
|
#define REG_P2MBSR 0x02
|
|
|
|
/* bank 48 registers */
|
|
#define REG_P1CR2 0x02
|
|
|
|
/* bank 49 registers */
|
|
#define REG_P1CR4 0x02
|
|
#define REG_P1SR 0x04
|
|
|
|
/* flags passed by platform_device for configuration */
|
|
#define MICREL_KS884X 0x01 /* 0=Timeberdale(FPGA), 1=Micrel */
|
|
#define KS884X_16BIT 0x02 /* 1=16bit, 0=32bit */
|
|
|
|
struct ks8842_adapter {
|
|
void __iomem *hw_addr;
|
|
int irq;
|
|
unsigned long conf_flags; /* copy of platform_device config */
|
|
struct tasklet_struct tasklet;
|
|
spinlock_t lock; /* spinlock to be interrupt safe */
|
|
struct work_struct timeout_work;
|
|
struct net_device *netdev;
|
|
};
|
|
|
|
static inline void ks8842_select_bank(struct ks8842_adapter *adapter, u16 bank)
|
|
{
|
|
iowrite16(bank, adapter->hw_addr + REG_SELECT_BANK);
|
|
}
|
|
|
|
static inline void ks8842_write8(struct ks8842_adapter *adapter, u16 bank,
|
|
u8 value, int offset)
|
|
{
|
|
ks8842_select_bank(adapter, bank);
|
|
iowrite8(value, adapter->hw_addr + offset);
|
|
}
|
|
|
|
static inline void ks8842_write16(struct ks8842_adapter *adapter, u16 bank,
|
|
u16 value, int offset)
|
|
{
|
|
ks8842_select_bank(adapter, bank);
|
|
iowrite16(value, adapter->hw_addr + offset);
|
|
}
|
|
|
|
static inline void ks8842_enable_bits(struct ks8842_adapter *adapter, u16 bank,
|
|
u16 bits, int offset)
|
|
{
|
|
u16 reg;
|
|
ks8842_select_bank(adapter, bank);
|
|
reg = ioread16(adapter->hw_addr + offset);
|
|
reg |= bits;
|
|
iowrite16(reg, adapter->hw_addr + offset);
|
|
}
|
|
|
|
static inline void ks8842_clear_bits(struct ks8842_adapter *adapter, u16 bank,
|
|
u16 bits, int offset)
|
|
{
|
|
u16 reg;
|
|
ks8842_select_bank(adapter, bank);
|
|
reg = ioread16(adapter->hw_addr + offset);
|
|
reg &= ~bits;
|
|
iowrite16(reg, adapter->hw_addr + offset);
|
|
}
|
|
|
|
static inline void ks8842_write32(struct ks8842_adapter *adapter, u16 bank,
|
|
u32 value, int offset)
|
|
{
|
|
ks8842_select_bank(adapter, bank);
|
|
iowrite32(value, adapter->hw_addr + offset);
|
|
}
|
|
|
|
static inline u8 ks8842_read8(struct ks8842_adapter *adapter, u16 bank,
|
|
int offset)
|
|
{
|
|
ks8842_select_bank(adapter, bank);
|
|
return ioread8(adapter->hw_addr + offset);
|
|
}
|
|
|
|
static inline u16 ks8842_read16(struct ks8842_adapter *adapter, u16 bank,
|
|
int offset)
|
|
{
|
|
ks8842_select_bank(adapter, bank);
|
|
return ioread16(adapter->hw_addr + offset);
|
|
}
|
|
|
|
static inline u32 ks8842_read32(struct ks8842_adapter *adapter, u16 bank,
|
|
int offset)
|
|
{
|
|
ks8842_select_bank(adapter, bank);
|
|
return ioread32(adapter->hw_addr + offset);
|
|
}
|
|
|
|
static void ks8842_reset(struct ks8842_adapter *adapter)
|
|
{
|
|
if (adapter->conf_flags & MICREL_KS884X) {
|
|
ks8842_write16(adapter, 3, 1, REG_GRR);
|
|
msleep(10);
|
|
iowrite16(0, adapter->hw_addr + REG_GRR);
|
|
} else {
|
|
/* The KS8842 goes haywire when doing softare reset
|
|
* a work around in the timberdale IP is implemented to
|
|
* do a hardware reset instead
|
|
ks8842_write16(adapter, 3, 1, REG_GRR);
|
|
msleep(10);
|
|
iowrite16(0, adapter->hw_addr + REG_GRR);
|
|
*/
|
|
iowrite32(0x1, adapter->hw_addr + REG_TIMB_RST);
|
|
msleep(20);
|
|
}
|
|
}
|
|
|
|
static void ks8842_update_link_status(struct net_device *netdev,
|
|
struct ks8842_adapter *adapter)
|
|
{
|
|
/* check the status of the link */
|
|
if (ks8842_read16(adapter, 45, REG_P1MBSR) & 0x4) {
|
|
netif_carrier_on(netdev);
|
|
netif_wake_queue(netdev);
|
|
} else {
|
|
netif_stop_queue(netdev);
|
|
netif_carrier_off(netdev);
|
|
}
|
|
}
|
|
|
|
static void ks8842_enable_tx(struct ks8842_adapter *adapter)
|
|
{
|
|
ks8842_enable_bits(adapter, 16, 0x01, REG_TXCR);
|
|
}
|
|
|
|
static void ks8842_disable_tx(struct ks8842_adapter *adapter)
|
|
{
|
|
ks8842_clear_bits(adapter, 16, 0x01, REG_TXCR);
|
|
}
|
|
|
|
static void ks8842_enable_rx(struct ks8842_adapter *adapter)
|
|
{
|
|
ks8842_enable_bits(adapter, 16, 0x01, REG_RXCR);
|
|
}
|
|
|
|
static void ks8842_disable_rx(struct ks8842_adapter *adapter)
|
|
{
|
|
ks8842_clear_bits(adapter, 16, 0x01, REG_RXCR);
|
|
}
|
|
|
|
static void ks8842_reset_hw(struct ks8842_adapter *adapter)
|
|
{
|
|
/* reset the HW */
|
|
ks8842_reset(adapter);
|
|
|
|
/* Enable QMU Transmit flow control / transmit padding / Transmit CRC */
|
|
ks8842_write16(adapter, 16, 0x000E, REG_TXCR);
|
|
|
|
/* enable the receiver, uni + multi + broadcast + flow ctrl
|
|
+ crc strip */
|
|
ks8842_write16(adapter, 16, 0x8 | 0x20 | 0x40 | 0x80 | 0x400,
|
|
REG_RXCR);
|
|
|
|
/* TX frame pointer autoincrement */
|
|
ks8842_write16(adapter, 17, 0x4000, REG_TXFDPR);
|
|
|
|
/* RX frame pointer autoincrement */
|
|
ks8842_write16(adapter, 17, 0x4000, REG_RXFDPR);
|
|
|
|
/* RX 2 kb high watermark */
|
|
ks8842_write16(adapter, 0, 0x1000, REG_QRFCR);
|
|
|
|
/* aggresive back off in half duplex */
|
|
ks8842_enable_bits(adapter, 32, 1 << 8, REG_SGCR1);
|
|
|
|
/* enable no excessive collison drop */
|
|
ks8842_enable_bits(adapter, 32, 1 << 3, REG_SGCR2);
|
|
|
|
/* Enable port 1 force flow control / back pressure / transmit / recv */
|
|
ks8842_write16(adapter, 48, 0x1E07, REG_P1CR2);
|
|
|
|
/* restart port auto-negotiation */
|
|
ks8842_enable_bits(adapter, 49, 1 << 13, REG_P1CR4);
|
|
|
|
/* Enable the transmitter */
|
|
ks8842_enable_tx(adapter);
|
|
|
|
/* Enable the receiver */
|
|
ks8842_enable_rx(adapter);
|
|
|
|
/* clear all interrupts */
|
|
ks8842_write16(adapter, 18, 0xffff, REG_ISR);
|
|
|
|
/* enable interrupts */
|
|
ks8842_write16(adapter, 18, ENABLED_IRQS, REG_IER);
|
|
|
|
/* enable the switch */
|
|
ks8842_write16(adapter, 32, 0x1, REG_SW_ID_AND_ENABLE);
|
|
}
|
|
|
|
static void ks8842_read_mac_addr(struct ks8842_adapter *adapter, u8 *dest)
|
|
{
|
|
int i;
|
|
u16 mac;
|
|
|
|
for (i = 0; i < ETH_ALEN; i++)
|
|
dest[ETH_ALEN - i - 1] = ks8842_read8(adapter, 2, REG_MARL + i);
|
|
|
|
if (adapter->conf_flags & MICREL_KS884X) {
|
|
/*
|
|
the sequence of saving mac addr between MAC and Switch is
|
|
different.
|
|
*/
|
|
|
|
mac = ks8842_read16(adapter, 2, REG_MARL);
|
|
ks8842_write16(adapter, 39, mac, REG_MACAR3);
|
|
mac = ks8842_read16(adapter, 2, REG_MARM);
|
|
ks8842_write16(adapter, 39, mac, REG_MACAR2);
|
|
mac = ks8842_read16(adapter, 2, REG_MARH);
|
|
ks8842_write16(adapter, 39, mac, REG_MACAR1);
|
|
} else {
|
|
|
|
/* make sure the switch port uses the same MAC as the QMU */
|
|
mac = ks8842_read16(adapter, 2, REG_MARL);
|
|
ks8842_write16(adapter, 39, mac, REG_MACAR1);
|
|
mac = ks8842_read16(adapter, 2, REG_MARM);
|
|
ks8842_write16(adapter, 39, mac, REG_MACAR2);
|
|
mac = ks8842_read16(adapter, 2, REG_MARH);
|
|
ks8842_write16(adapter, 39, mac, REG_MACAR3);
|
|
}
|
|
}
|
|
|
|
static void ks8842_write_mac_addr(struct ks8842_adapter *adapter, u8 *mac)
|
|
{
|
|
unsigned long flags;
|
|
unsigned i;
|
|
|
|
spin_lock_irqsave(&adapter->lock, flags);
|
|
for (i = 0; i < ETH_ALEN; i++) {
|
|
ks8842_write8(adapter, 2, mac[ETH_ALEN - i - 1], REG_MARL + i);
|
|
if (!(adapter->conf_flags & MICREL_KS884X))
|
|
ks8842_write8(adapter, 39, mac[ETH_ALEN - i - 1],
|
|
REG_MACAR1 + i);
|
|
}
|
|
|
|
if (adapter->conf_flags & MICREL_KS884X) {
|
|
/*
|
|
the sequence of saving mac addr between MAC and Switch is
|
|
different.
|
|
*/
|
|
|
|
u16 mac;
|
|
|
|
mac = ks8842_read16(adapter, 2, REG_MARL);
|
|
ks8842_write16(adapter, 39, mac, REG_MACAR3);
|
|
mac = ks8842_read16(adapter, 2, REG_MARM);
|
|
ks8842_write16(adapter, 39, mac, REG_MACAR2);
|
|
mac = ks8842_read16(adapter, 2, REG_MARH);
|
|
ks8842_write16(adapter, 39, mac, REG_MACAR1);
|
|
}
|
|
spin_unlock_irqrestore(&adapter->lock, flags);
|
|
}
|
|
|
|
static inline u16 ks8842_tx_fifo_space(struct ks8842_adapter *adapter)
|
|
{
|
|
return ks8842_read16(adapter, 16, REG_TXMIR) & 0x1fff;
|
|
}
|
|
|
|
static int ks8842_tx_frame(struct sk_buff *skb, struct net_device *netdev)
|
|
{
|
|
struct ks8842_adapter *adapter = netdev_priv(netdev);
|
|
int len = skb->len;
|
|
|
|
netdev_dbg(netdev, "%s: len %u head %p data %p tail %p end %p\n",
|
|
__func__, skb->len, skb->head, skb->data,
|
|
skb_tail_pointer(skb), skb_end_pointer(skb));
|
|
|
|
/* check FIFO buffer space, we need space for CRC and command bits */
|
|
if (ks8842_tx_fifo_space(adapter) < len + 8)
|
|
return NETDEV_TX_BUSY;
|
|
|
|
if (adapter->conf_flags & KS884X_16BIT) {
|
|
u16 *ptr16 = (u16 *)skb->data;
|
|
ks8842_write16(adapter, 17, 0x8000 | 0x100, REG_QMU_DATA_LO);
|
|
ks8842_write16(adapter, 17, (u16)len, REG_QMU_DATA_HI);
|
|
netdev->stats.tx_bytes += len;
|
|
|
|
/* copy buffer */
|
|
while (len > 0) {
|
|
iowrite16(*ptr16++, adapter->hw_addr + REG_QMU_DATA_LO);
|
|
iowrite16(*ptr16++, adapter->hw_addr + REG_QMU_DATA_HI);
|
|
len -= sizeof(u32);
|
|
}
|
|
} else {
|
|
|
|
u32 *ptr = (u32 *)skb->data;
|
|
u32 ctrl;
|
|
/* the control word, enable IRQ, port 1 and the length */
|
|
ctrl = 0x8000 | 0x100 | (len << 16);
|
|
ks8842_write32(adapter, 17, ctrl, REG_QMU_DATA_LO);
|
|
|
|
netdev->stats.tx_bytes += len;
|
|
|
|
/* copy buffer */
|
|
while (len > 0) {
|
|
iowrite32(*ptr, adapter->hw_addr + REG_QMU_DATA_LO);
|
|
len -= sizeof(u32);
|
|
ptr++;
|
|
}
|
|
}
|
|
|
|
/* enqueue packet */
|
|
ks8842_write16(adapter, 17, 1, REG_TXQCR);
|
|
|
|
dev_kfree_skb(skb);
|
|
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
static void ks8842_rx_frame(struct net_device *netdev,
|
|
struct ks8842_adapter *adapter)
|
|
{
|
|
u32 status;
|
|
int len;
|
|
|
|
if (adapter->conf_flags & KS884X_16BIT) {
|
|
status = ks8842_read16(adapter, 17, REG_QMU_DATA_LO);
|
|
len = ks8842_read16(adapter, 17, REG_QMU_DATA_HI);
|
|
netdev_dbg(netdev, "%s - rx_data: status: %x\n",
|
|
__func__, status);
|
|
} else {
|
|
status = ks8842_read32(adapter, 17, REG_QMU_DATA_LO);
|
|
len = (status >> 16) & 0x7ff;
|
|
status &= 0xffff;
|
|
netdev_dbg(netdev, "%s - rx_data: status: %x\n",
|
|
__func__, status);
|
|
}
|
|
|
|
/* check the status */
|
|
if ((status & RXSR_VALID) && !(status & RXSR_ERROR)) {
|
|
struct sk_buff *skb = netdev_alloc_skb_ip_align(netdev, len);
|
|
|
|
netdev_dbg(netdev, "%s, got package, len: %d\n", __func__, len);
|
|
if (skb) {
|
|
|
|
netdev->stats.rx_packets++;
|
|
netdev->stats.rx_bytes += len;
|
|
if (status & RXSR_MULTICAST)
|
|
netdev->stats.multicast++;
|
|
|
|
if (adapter->conf_flags & KS884X_16BIT) {
|
|
u16 *data16 = (u16 *)skb_put(skb, len);
|
|
ks8842_select_bank(adapter, 17);
|
|
while (len > 0) {
|
|
*data16++ = ioread16(adapter->hw_addr +
|
|
REG_QMU_DATA_LO);
|
|
*data16++ = ioread16(adapter->hw_addr +
|
|
REG_QMU_DATA_HI);
|
|
len -= sizeof(u32);
|
|
}
|
|
} else {
|
|
u32 *data = (u32 *)skb_put(skb, len);
|
|
|
|
ks8842_select_bank(adapter, 17);
|
|
while (len > 0) {
|
|
*data++ = ioread32(adapter->hw_addr +
|
|
REG_QMU_DATA_LO);
|
|
len -= sizeof(u32);
|
|
}
|
|
}
|
|
skb->protocol = eth_type_trans(skb, netdev);
|
|
netif_rx(skb);
|
|
} else
|
|
netdev->stats.rx_dropped++;
|
|
} else {
|
|
netdev_dbg(netdev, "RX error, status: %x\n", status);
|
|
netdev->stats.rx_errors++;
|
|
if (status & RXSR_TOO_LONG)
|
|
netdev->stats.rx_length_errors++;
|
|
if (status & RXSR_CRC_ERROR)
|
|
netdev->stats.rx_crc_errors++;
|
|
if (status & RXSR_RUNT)
|
|
netdev->stats.rx_frame_errors++;
|
|
}
|
|
|
|
/* set high watermark to 3K */
|
|
ks8842_clear_bits(adapter, 0, 1 << 12, REG_QRFCR);
|
|
|
|
/* release the frame */
|
|
ks8842_write16(adapter, 17, 0x01, REG_RXQCR);
|
|
|
|
/* set high watermark to 2K */
|
|
ks8842_enable_bits(adapter, 0, 1 << 12, REG_QRFCR);
|
|
}
|
|
|
|
void ks8842_handle_rx(struct net_device *netdev, struct ks8842_adapter *adapter)
|
|
{
|
|
u16 rx_data = ks8842_read16(adapter, 16, REG_RXMIR) & 0x1fff;
|
|
netdev_dbg(netdev, "%s Entry - rx_data: %d\n", __func__, rx_data);
|
|
while (rx_data) {
|
|
ks8842_rx_frame(netdev, adapter);
|
|
rx_data = ks8842_read16(adapter, 16, REG_RXMIR) & 0x1fff;
|
|
}
|
|
}
|
|
|
|
void ks8842_handle_tx(struct net_device *netdev, struct ks8842_adapter *adapter)
|
|
{
|
|
u16 sr = ks8842_read16(adapter, 16, REG_TXSR);
|
|
netdev_dbg(netdev, "%s - entry, sr: %x\n", __func__, sr);
|
|
netdev->stats.tx_packets++;
|
|
if (netif_queue_stopped(netdev))
|
|
netif_wake_queue(netdev);
|
|
}
|
|
|
|
void ks8842_handle_rx_overrun(struct net_device *netdev,
|
|
struct ks8842_adapter *adapter)
|
|
{
|
|
netdev_dbg(netdev, "%s: entry\n", __func__);
|
|
netdev->stats.rx_errors++;
|
|
netdev->stats.rx_fifo_errors++;
|
|
}
|
|
|
|
void ks8842_tasklet(unsigned long arg)
|
|
{
|
|
struct net_device *netdev = (struct net_device *)arg;
|
|
struct ks8842_adapter *adapter = netdev_priv(netdev);
|
|
u16 isr;
|
|
unsigned long flags;
|
|
u16 entry_bank;
|
|
|
|
/* read current bank to be able to set it back */
|
|
spin_lock_irqsave(&adapter->lock, flags);
|
|
entry_bank = ioread16(adapter->hw_addr + REG_SELECT_BANK);
|
|
spin_unlock_irqrestore(&adapter->lock, flags);
|
|
|
|
isr = ks8842_read16(adapter, 18, REG_ISR);
|
|
netdev_dbg(netdev, "%s - ISR: 0x%x\n", __func__, isr);
|
|
|
|
/* Ack */
|
|
ks8842_write16(adapter, 18, isr, REG_ISR);
|
|
|
|
if (!(adapter->conf_flags & MICREL_KS884X))
|
|
/* Ack in the timberdale IP as well */
|
|
iowrite32(0x1, adapter->hw_addr + REG_TIMB_IAR);
|
|
|
|
if (!netif_running(netdev))
|
|
return;
|
|
|
|
if (isr & IRQ_LINK_CHANGE)
|
|
ks8842_update_link_status(netdev, adapter);
|
|
|
|
if (isr & (IRQ_RX | IRQ_RX_ERROR))
|
|
ks8842_handle_rx(netdev, adapter);
|
|
|
|
if (isr & IRQ_TX)
|
|
ks8842_handle_tx(netdev, adapter);
|
|
|
|
if (isr & IRQ_RX_OVERRUN)
|
|
ks8842_handle_rx_overrun(netdev, adapter);
|
|
|
|
if (isr & IRQ_TX_STOPPED) {
|
|
ks8842_disable_tx(adapter);
|
|
ks8842_enable_tx(adapter);
|
|
}
|
|
|
|
if (isr & IRQ_RX_STOPPED) {
|
|
ks8842_disable_rx(adapter);
|
|
ks8842_enable_rx(adapter);
|
|
}
|
|
|
|
/* re-enable interrupts, put back the bank selection register */
|
|
spin_lock_irqsave(&adapter->lock, flags);
|
|
ks8842_write16(adapter, 18, ENABLED_IRQS, REG_IER);
|
|
iowrite16(entry_bank, adapter->hw_addr + REG_SELECT_BANK);
|
|
spin_unlock_irqrestore(&adapter->lock, flags);
|
|
}
|
|
|
|
static irqreturn_t ks8842_irq(int irq, void *devid)
|
|
{
|
|
struct net_device *netdev = devid;
|
|
struct ks8842_adapter *adapter = netdev_priv(netdev);
|
|
u16 isr;
|
|
u16 entry_bank = ioread16(adapter->hw_addr + REG_SELECT_BANK);
|
|
irqreturn_t ret = IRQ_NONE;
|
|
|
|
isr = ks8842_read16(adapter, 18, REG_ISR);
|
|
netdev_dbg(netdev, "%s - ISR: 0x%x\n", __func__, isr);
|
|
|
|
if (isr) {
|
|
/* disable IRQ */
|
|
ks8842_write16(adapter, 18, 0x00, REG_IER);
|
|
|
|
/* schedule tasklet */
|
|
tasklet_schedule(&adapter->tasklet);
|
|
|
|
ret = IRQ_HANDLED;
|
|
}
|
|
|
|
iowrite16(entry_bank, adapter->hw_addr + REG_SELECT_BANK);
|
|
|
|
return ret;
|
|
}
|
|
|
|
|
|
/* Netdevice operations */
|
|
|
|
static int ks8842_open(struct net_device *netdev)
|
|
{
|
|
struct ks8842_adapter *adapter = netdev_priv(netdev);
|
|
int err;
|
|
|
|
netdev_dbg(netdev, "%s - entry\n", __func__);
|
|
|
|
/* reset the HW */
|
|
ks8842_reset_hw(adapter);
|
|
|
|
ks8842_write_mac_addr(adapter, netdev->dev_addr);
|
|
|
|
ks8842_update_link_status(netdev, adapter);
|
|
|
|
err = request_irq(adapter->irq, ks8842_irq, IRQF_SHARED, DRV_NAME,
|
|
netdev);
|
|
if (err) {
|
|
pr_err("Failed to request IRQ: %d: %d\n", adapter->irq, err);
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ks8842_close(struct net_device *netdev)
|
|
{
|
|
struct ks8842_adapter *adapter = netdev_priv(netdev);
|
|
|
|
netdev_dbg(netdev, "%s - entry\n", __func__);
|
|
|
|
cancel_work_sync(&adapter->timeout_work);
|
|
|
|
/* free the irq */
|
|
free_irq(adapter->irq, netdev);
|
|
|
|
/* disable the switch */
|
|
ks8842_write16(adapter, 32, 0x0, REG_SW_ID_AND_ENABLE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static netdev_tx_t ks8842_xmit_frame(struct sk_buff *skb,
|
|
struct net_device *netdev)
|
|
{
|
|
int ret;
|
|
struct ks8842_adapter *adapter = netdev_priv(netdev);
|
|
|
|
netdev_dbg(netdev, "%s: entry\n", __func__);
|
|
|
|
ret = ks8842_tx_frame(skb, netdev);
|
|
|
|
if (ks8842_tx_fifo_space(adapter) < netdev->mtu + 8)
|
|
netif_stop_queue(netdev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ks8842_set_mac(struct net_device *netdev, void *p)
|
|
{
|
|
struct ks8842_adapter *adapter = netdev_priv(netdev);
|
|
struct sockaddr *addr = p;
|
|
char *mac = (u8 *)addr->sa_data;
|
|
|
|
netdev_dbg(netdev, "%s: entry\n", __func__);
|
|
|
|
if (!is_valid_ether_addr(addr->sa_data))
|
|
return -EADDRNOTAVAIL;
|
|
|
|
memcpy(netdev->dev_addr, mac, netdev->addr_len);
|
|
|
|
ks8842_write_mac_addr(adapter, mac);
|
|
return 0;
|
|
}
|
|
|
|
static void ks8842_tx_timeout_work(struct work_struct *work)
|
|
{
|
|
struct ks8842_adapter *adapter =
|
|
container_of(work, struct ks8842_adapter, timeout_work);
|
|
struct net_device *netdev = adapter->netdev;
|
|
unsigned long flags;
|
|
|
|
netdev_dbg(netdev, "%s: entry\n", __func__);
|
|
|
|
spin_lock_irqsave(&adapter->lock, flags);
|
|
/* disable interrupts */
|
|
ks8842_write16(adapter, 18, 0, REG_IER);
|
|
ks8842_write16(adapter, 18, 0xFFFF, REG_ISR);
|
|
|
|
netif_stop_queue(netdev);
|
|
|
|
spin_unlock_irqrestore(&adapter->lock, flags);
|
|
|
|
ks8842_reset_hw(adapter);
|
|
|
|
ks8842_write_mac_addr(adapter, netdev->dev_addr);
|
|
|
|
ks8842_update_link_status(netdev, adapter);
|
|
}
|
|
|
|
static void ks8842_tx_timeout(struct net_device *netdev)
|
|
{
|
|
struct ks8842_adapter *adapter = netdev_priv(netdev);
|
|
|
|
netdev_dbg(netdev, "%s: entry\n", __func__);
|
|
|
|
schedule_work(&adapter->timeout_work);
|
|
}
|
|
|
|
static const struct net_device_ops ks8842_netdev_ops = {
|
|
.ndo_open = ks8842_open,
|
|
.ndo_stop = ks8842_close,
|
|
.ndo_start_xmit = ks8842_xmit_frame,
|
|
.ndo_set_mac_address = ks8842_set_mac,
|
|
.ndo_tx_timeout = ks8842_tx_timeout,
|
|
.ndo_validate_addr = eth_validate_addr
|
|
};
|
|
|
|
static const struct ethtool_ops ks8842_ethtool_ops = {
|
|
.get_link = ethtool_op_get_link,
|
|
};
|
|
|
|
static int __devinit ks8842_probe(struct platform_device *pdev)
|
|
{
|
|
int err = -ENOMEM;
|
|
struct resource *iomem;
|
|
struct net_device *netdev;
|
|
struct ks8842_adapter *adapter;
|
|
struct ks8842_platform_data *pdata = pdev->dev.platform_data;
|
|
u16 id;
|
|
unsigned i;
|
|
|
|
iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!request_mem_region(iomem->start, resource_size(iomem), DRV_NAME))
|
|
goto err_mem_region;
|
|
|
|
netdev = alloc_etherdev(sizeof(struct ks8842_adapter));
|
|
if (!netdev)
|
|
goto err_alloc_etherdev;
|
|
|
|
SET_NETDEV_DEV(netdev, &pdev->dev);
|
|
|
|
adapter = netdev_priv(netdev);
|
|
adapter->netdev = netdev;
|
|
INIT_WORK(&adapter->timeout_work, ks8842_tx_timeout_work);
|
|
adapter->hw_addr = ioremap(iomem->start, resource_size(iomem));
|
|
adapter->conf_flags = iomem->flags;
|
|
|
|
if (!adapter->hw_addr)
|
|
goto err_ioremap;
|
|
|
|
adapter->irq = platform_get_irq(pdev, 0);
|
|
if (adapter->irq < 0) {
|
|
err = adapter->irq;
|
|
goto err_get_irq;
|
|
}
|
|
|
|
tasklet_init(&adapter->tasklet, ks8842_tasklet, (unsigned long)netdev);
|
|
spin_lock_init(&adapter->lock);
|
|
|
|
netdev->netdev_ops = &ks8842_netdev_ops;
|
|
netdev->ethtool_ops = &ks8842_ethtool_ops;
|
|
|
|
/* Check if a mac address was given */
|
|
i = netdev->addr_len;
|
|
if (pdata) {
|
|
for (i = 0; i < netdev->addr_len; i++)
|
|
if (pdata->macaddr[i] != 0)
|
|
break;
|
|
|
|
if (i < netdev->addr_len)
|
|
/* an address was passed, use it */
|
|
memcpy(netdev->dev_addr, pdata->macaddr,
|
|
netdev->addr_len);
|
|
}
|
|
|
|
if (i == netdev->addr_len) {
|
|
ks8842_read_mac_addr(adapter, netdev->dev_addr);
|
|
|
|
if (!is_valid_ether_addr(netdev->dev_addr))
|
|
random_ether_addr(netdev->dev_addr);
|
|
}
|
|
|
|
id = ks8842_read16(adapter, 32, REG_SW_ID_AND_ENABLE);
|
|
|
|
strcpy(netdev->name, "eth%d");
|
|
err = register_netdev(netdev);
|
|
if (err)
|
|
goto err_register;
|
|
|
|
platform_set_drvdata(pdev, netdev);
|
|
|
|
pr_info("Found chip, family: 0x%x, id: 0x%x, rev: 0x%x\n",
|
|
(id >> 8) & 0xff, (id >> 4) & 0xf, (id >> 1) & 0x7);
|
|
|
|
return 0;
|
|
|
|
err_register:
|
|
err_get_irq:
|
|
iounmap(adapter->hw_addr);
|
|
err_ioremap:
|
|
free_netdev(netdev);
|
|
err_alloc_etherdev:
|
|
release_mem_region(iomem->start, resource_size(iomem));
|
|
err_mem_region:
|
|
return err;
|
|
}
|
|
|
|
static int __devexit ks8842_remove(struct platform_device *pdev)
|
|
{
|
|
struct net_device *netdev = platform_get_drvdata(pdev);
|
|
struct ks8842_adapter *adapter = netdev_priv(netdev);
|
|
struct resource *iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
|
|
unregister_netdev(netdev);
|
|
tasklet_kill(&adapter->tasklet);
|
|
iounmap(adapter->hw_addr);
|
|
free_netdev(netdev);
|
|
release_mem_region(iomem->start, resource_size(iomem));
|
|
platform_set_drvdata(pdev, NULL);
|
|
return 0;
|
|
}
|
|
|
|
|
|
static struct platform_driver ks8842_platform_driver = {
|
|
.driver = {
|
|
.name = DRV_NAME,
|
|
.owner = THIS_MODULE,
|
|
},
|
|
.probe = ks8842_probe,
|
|
.remove = ks8842_remove,
|
|
};
|
|
|
|
static int __init ks8842_init(void)
|
|
{
|
|
return platform_driver_register(&ks8842_platform_driver);
|
|
}
|
|
|
|
static void __exit ks8842_exit(void)
|
|
{
|
|
platform_driver_unregister(&ks8842_platform_driver);
|
|
}
|
|
|
|
module_init(ks8842_init);
|
|
module_exit(ks8842_exit);
|
|
|
|
MODULE_DESCRIPTION("Timberdale KS8842 ethernet driver");
|
|
MODULE_AUTHOR("Mocean Laboratories <info@mocean-labs.com>");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_ALIAS("platform:ks8842");
|
|
|