mirror of
https://github.com/torvalds/linux.git
synced 2024-11-14 16:12:02 +00:00
b24413180f
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
122 lines
3.6 KiB
C
122 lines
3.6 KiB
C
/* SPDX-License-Identifier: GPL-2.0 */
|
|
#ifndef __ATMEL_CLASSD_H_
|
|
#define __ATMEL_CLASSD_H_
|
|
|
|
#define CLASSD_CR 0x00000000
|
|
#define CLASSD_CR_RESET 0x1
|
|
|
|
#define CLASSD_MR 0x00000004
|
|
|
|
#define CLASSD_MR_LEN_DIS 0x0
|
|
#define CLASSD_MR_LEN_EN 0x1
|
|
#define CLASSD_MR_LEN_MASK (0x1 << 0)
|
|
#define CLASSD_MR_LEN_SHIFT (0)
|
|
|
|
#define CLASSD_MR_LMUTE_DIS 0x0
|
|
#define CLASSD_MR_LMUTE_EN 0x1
|
|
#define CLASSD_MR_LMUTE_SHIFT (0x1)
|
|
#define CLASSD_MR_LMUTE_MASK (0x1 << 1)
|
|
|
|
#define CLASSD_MR_REN_DIS 0x0
|
|
#define CLASSD_MR_REN_EN 0x1
|
|
#define CLASSD_MR_REN_MASK (0x1 << 4)
|
|
#define CLASSD_MR_REN_SHIFT (4)
|
|
|
|
#define CLASSD_MR_RMUTE_DIS 0x0
|
|
#define CLASSD_MR_RMUTE_EN 0x1
|
|
#define CLASSD_MR_RMUTE_SHIFT (0x5)
|
|
#define CLASSD_MR_RMUTE_MASK (0x1 << 5)
|
|
|
|
#define CLASSD_MR_PWMTYP_SINGLE 0x0
|
|
#define CLASSD_MR_PWMTYP_DIFF 0x1
|
|
#define CLASSD_MR_PWMTYP_MASK (0x1 << 8)
|
|
#define CLASSD_MR_PWMTYP_SHIFT (8)
|
|
|
|
#define CLASSD_MR_NON_OVERLAP_DIS 0x0
|
|
#define CLASSD_MR_NON_OVERLAP_EN 0x1
|
|
#define CLASSD_MR_NON_OVERLAP_MASK (0x1 << 16)
|
|
#define CLASSD_MR_NON_OVERLAP_SHIFT (16)
|
|
|
|
#define CLASSD_MR_NOVR_VAL_5NS 0x0
|
|
#define CLASSD_MR_NOVR_VAL_10NS 0x1
|
|
#define CLASSD_MR_NOVR_VAL_15NS 0x2
|
|
#define CLASSD_MR_NOVR_VAL_20NS 0x3
|
|
#define CLASSD_MR_NOVR_VAL_MASK (0x3 << 20)
|
|
#define CLASSD_MR_NOVR_VAL_SHIFT (20)
|
|
|
|
#define CLASSD_INTPMR 0x00000008
|
|
|
|
#define CLASSD_INTPMR_ATTL_MASK (0x3f << 0)
|
|
#define CLASSD_INTPMR_ATTL_SHIFT (0)
|
|
#define CLASSD_INTPMR_ATTR_MASK (0x3f << 8)
|
|
#define CLASSD_INTPMR_ATTR_SHIFT (8)
|
|
|
|
#define CLASSD_INTPMR_DSP_CLK_FREQ_12M288 0x0
|
|
#define CLASSD_INTPMR_DSP_CLK_FREQ_11M2896 0x1
|
|
#define CLASSD_INTPMR_DSP_CLK_FREQ_MASK (0x1 << 16)
|
|
#define CLASSD_INTPMR_DSP_CLK_FREQ_SHIFT (16)
|
|
|
|
#define CLASSD_INTPMR_DEEMP_DIS 0x0
|
|
#define CLASSD_INTPMR_DEEMP_EN 0x1
|
|
#define CLASSD_INTPMR_DEEMP_MASK (0x1 << 18)
|
|
#define CLASSD_INTPMR_DEEMP_SHIFT (18)
|
|
|
|
#define CLASSD_INTPMR_SWAP_LEFT_ON_LSB 0x0
|
|
#define CLASSD_INTPMR_SWAP_RIGHT_ON_LSB 0x1
|
|
#define CLASSD_INTPMR_SWAP_MASK (0x1 << 19)
|
|
#define CLASSD_INTPMR_SWAP_SHIFT (19)
|
|
|
|
#define CLASSD_INTPMR_FRAME_8K 0x0
|
|
#define CLASSD_INTPMR_FRAME_16K 0x1
|
|
#define CLASSD_INTPMR_FRAME_32K 0x2
|
|
#define CLASSD_INTPMR_FRAME_48K 0x3
|
|
#define CLASSD_INTPMR_FRAME_96K 0x4
|
|
#define CLASSD_INTPMR_FRAME_22K 0x5
|
|
#define CLASSD_INTPMR_FRAME_44K 0x6
|
|
#define CLASSD_INTPMR_FRAME_88K 0x7
|
|
#define CLASSD_INTPMR_FRAME_MASK (0x7 << 20)
|
|
#define CLASSD_INTPMR_FRAME_SHIFT (20)
|
|
|
|
#define CLASSD_INTPMR_EQCFG_FLAT 0x0
|
|
#define CLASSD_INTPMR_EQCFG_B_BOOST_12 0x1
|
|
#define CLASSD_INTPMR_EQCFG_B_BOOST_6 0x2
|
|
#define CLASSD_INTPMR_EQCFG_B_CUT_12 0x3
|
|
#define CLASSD_INTPMR_EQCFG_B_CUT_6 0x4
|
|
#define CLASSD_INTPMR_EQCFG_M_BOOST_3 0x5
|
|
#define CLASSD_INTPMR_EQCFG_M_BOOST_8 0x6
|
|
#define CLASSD_INTPMR_EQCFG_M_CUT_3 0x7
|
|
#define CLASSD_INTPMR_EQCFG_M_CUT_8 0x8
|
|
#define CLASSD_INTPMR_EQCFG_T_BOOST_12 0x9
|
|
#define CLASSD_INTPMR_EQCFG_T_BOOST_6 0xa
|
|
#define CLASSD_INTPMR_EQCFG_T_CUT_12 0xb
|
|
#define CLASSD_INTPMR_EQCFG_T_CUT_6 0xc
|
|
#define CLASSD_INTPMR_EQCFG_SHIFT (24)
|
|
|
|
#define CLASSD_INTPMR_MONO_DIS 0x0
|
|
#define CLASSD_INTPMR_MONO_EN 0x1
|
|
#define CLASSD_INTPMR_MONO_MASK (0x1 << 28)
|
|
#define CLASSD_INTPMR_MONO_SHIFT (28)
|
|
|
|
#define CLASSD_INTPMR_MONO_MODE_MIX 0x0
|
|
#define CLASSD_INTPMR_MONO_MODE_SAT 0x1
|
|
#define CLASSD_INTPMR_MONO_MODE_LEFT 0x2
|
|
#define CLASSD_INTPMR_MONO_MODE_RIGHT 0x3
|
|
#define CLASSD_INTPMR_MONO_MODE_MASK (0x3 << 29)
|
|
#define CLASSD_INTPMR_MONO_MODE_SHIFT (29)
|
|
|
|
#define CLASSD_INTSR 0x0000000c
|
|
|
|
#define CLASSD_THR 0x00000010
|
|
|
|
#define CLASSD_IER 0x00000014
|
|
|
|
#define CLASSD_IDR 0x00000018
|
|
|
|
#define CLASSD_IMR 0x0000001c
|
|
|
|
#define CLASSD_ISR 0x00000020
|
|
|
|
#define CLASSD_WPMR 0x000000e4
|
|
|
|
#endif
|