Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-20 11:01:38 +00:00
Code Issues Packages Projects Releases Wiki Activity
da4a0f764a
linux/arch/arm/mach-omap2
History
Andy Green b235e00783 OMAP2+: Common CPU DIE ID reading code reads wrong registers for OMAP4430 
This adapts the register offsets used to read the CPU DIE ID registers
when run on 44XX so they match what is in the OMAP4430 Reference Manual
page 269

Signed-off-by: Andy Green <andy.green@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-03-14 11:12:54 -07:00
..
include/mach TI816X: Add low level debug support 2011-02-16 08:31:53 -08:00
board-2430sdp.c Merge branches 'devel-iommu-mailbox', 'devel-mcbsp', 'devel-board' and 'devel-hsmmc' into omap-for-linus 2011-03-02 17:11:18 -08:00
board-3430sdp.c Merge branches 'devel-iommu-mailbox', 'devel-mcbsp', 'devel-board' and 'devel-hsmmc' into omap-for-linus 2011-03-02 17:11:18 -08:00
board-3630sdp.c omap2+: Minimize board specific init_early calls 2011-02-25 10:19:21 -08:00
board-4430sdp.c Merge branches 'devel-iommu-mailbox', 'devel-mcbsp', 'devel-board' and 'devel-hsmmc' into omap-for-linus 2011-03-02 17:11:18 -08:00
board-am3517crane.c omap2+: Minimize board specific init_early calls 2011-02-25 10:19:21 -08:00
board-am3517evm.c audio : AM3517 : Adding i2c info for AIC23 codec 2011-03-08 15:20:41 -08:00
board-apollon.c omap2+: Minimize board specific init_early calls 2011-02-25 10:19:21 -08:00
board-cm-t35.c omap2+: Minimize board specific init_early calls 2011-02-25 10:19:21 -08:00
board-cm-t3517.c omap2+: Minimize board specific init_early calls 2011-02-25 10:19:21 -08:00
board-devkit8000.c Merge branches 'devel-iommu-mailbox', 'devel-mcbsp', 'devel-board' and 'devel-hsmmc' into omap-for-linus 2011-03-02 17:11:18 -08:00
board-flash.c omap: Fix compile if MTD_NAND_OMAP2 is not selected 2011-02-25 10:19:21 -08:00
board-flash.h omap3630: nand: fix device size to work in polled mode 2011-02-17 15:32:52 -08:00
board-generic.c omap2+: Minimize board specific init_early calls 2011-02-25 10:19:21 -08:00
board-h4.c omap: Fix H4 init_irq to not call h4_init_flash 2011-03-10 09:51:29 -08:00
board-igep0020.c Merge branches 'devel-iommu-mailbox', 'devel-mcbsp', 'devel-board' and 'devel-hsmmc' into omap-for-linus 2011-03-02 17:11:18 -08:00
board-igep0030.c OMAP: hsmmc: Rename the device and driver 2011-03-01 13:13:27 -08:00
board-ldp.c ldp: Fix regulator mapping for ads7846 TS controller 2011-03-02 16:45:50 -08:00
board-n8x0.c omap: mmc: split out init for 2420 2011-03-01 13:12:55 -08:00
board-omap3beagle.c omap: Remove unnecessary twl4030_codec_audio settings from board files 2011-03-02 17:01:14 -08:00
board-omap3evm.c Merge branches 'devel-iommu-mailbox', 'devel-mcbsp', 'devel-board' and 'devel-hsmmc' into omap-for-linus 2011-03-02 17:11:18 -08:00
board-omap3logic.c ARM: OMAP2: use early init hook 2011-02-14 15:40:20 -08:00
board-omap3pandora.c Merge branches 'devel-iommu-mailbox', 'devel-mcbsp', 'devel-board' and 'devel-hsmmc' into omap-for-linus 2011-03-02 17:11:18 -08:00
board-omap3stalker.c omap: Remove unnecessary twl4030_codec_audio settings from board files 2011-03-02 17:01:14 -08:00
board-omap3touchbook.c omap: Remove unnecessary twl4030_codec_audio settings from board files 2011-03-02 17:01:14 -08:00
board-omap4panda.c Merge branches 'devel-iommu-mailbox', 'devel-mcbsp', 'devel-board' and 'devel-hsmmc' into omap-for-linus 2011-03-02 17:11:18 -08:00
board-overo.c omap: Remove unnecessary twl4030_codec_audio settings from board files 2011-03-02 17:01:14 -08:00
board-rm680.c OMAP: hsmmc: Rename the device and driver 2011-03-01 13:13:27 -08:00
board-rx51-peripherals.c Merge branches 'devel-iommu-mailbox', 'devel-mcbsp', 'devel-board' and 'devel-hsmmc' into omap-for-linus 2011-03-02 17:11:18 -08:00
board-rx51-video.c OMAP2, 3: DSS2: board files: replace platform_device_register with omap_display_init() 2011-02-23 09:34:25 +02:00
board-rx51.c omap2+: Minimize board specific init_early calls 2011-02-25 10:19:21 -08:00
board-ti8168evm.c omap2+: Minimize board specific init_early calls 2011-02-25 10:19:21 -08:00
board-zoom-debugboard.c OMAP2plus: Fix static function warnings 2010-10-08 10:02:49 -07:00
board-zoom-display.c OMAP2, 3: DSS2: board files: replace platform_device_register with omap_display_init() 2011-02-23 09:34:25 +02:00
board-zoom-peripherals.c Merge branches 'devel-iommu-mailbox', 'devel-mcbsp', 'devel-board' and 'devel-hsmmc' into omap-for-linus 2011-03-02 17:11:18 -08:00
board-zoom.c omap3630: nand: fix device size to work in polled mode 2011-02-17 15:32:52 -08:00
clkt2xxx_apll.c OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" 2010-12-21 21:05:14 -07:00
clkt2xxx_dpllcore.c OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" 2010-12-21 21:05:14 -07:00
clkt2xxx_osc.c OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
clkt2xxx_sys.c OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
clkt2xxx_virt_prcm_set.c OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" 2010-12-21 21:05:14 -07:00
clkt34xx_dpll3m2.c OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clkt_clksel.c arm: omap2: clksel: fix compile warningOrganization: Texas Instruments\n 2011-02-16 17:49:35 -08:00
clkt_dpll.c OMAP2/3: clock: fix fint calculation for DPLL_FREQSEL 2011-02-22 20:00:47 -07:00
clock2xxx.c OMAP2/3 clock: combine OMAP2 & 3 boot-time MPU rate change code 2010-02-24 17:45:15 -07:00
clock2xxx.h omap: Start using CONFIG_SOC_OMAP 2011-01-27 16:39:40 -08:00
clock3xxx_data.c OMAP: hsmmc: Rename the device and driver 2011-03-01 13:13:27 -08:00
clock3xxx.c OMAP3: clock: fix incorrect rate display when switching MPU rate at boot 2010-12-21 21:08:14 -07:00
clock3xxx.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock34xx.c OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
clock34xx.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock36xx.c OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock36xx.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock44xx_data.c OMAP: hsmmc: Rename the device and driver 2011-03-01 13:13:27 -08:00
clock44xx.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock2420_data.c Merge branch 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 2011-01-07 13:16:28 -08:00
clock2430_data.c OMAP: hsmmc: Rename the device and driver 2011-03-01 13:13:27 -08:00
clock2430.c OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
clock3517.c OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
clock3517.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock_common_data.c OMAP3 clock: rename RATE_IN_343X, RATE_IN_3430ES2 to match reality 2010-05-20 12:31:07 -06:00
clock.c OMAP2+: clockdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:15 -07:00
clock.h OMAP: clock: fix configuration of J-Type DPLLs to work for OMAP3 and OMAP4 2010-12-21 21:31:43 -07:00
clockdomain.c OMAP4: clockdomain: bypass unimplemented wake-up dependency functions on OMAP4 2011-01-18 12:36:53 -07:00
clockdomain.h omap2plus: clockdomain: Trivial fix for build break because of clktrctrl_mask 2011-01-07 13:33:08 -08:00
clockdomains2xxx_3xxx_data.c omap: Start using CONFIG_SOC_OMAP 2011-01-27 16:39:40 -08:00
clockdomains44xx_data.c OMAP: PRCM: remove duplicated headers 2011-01-18 12:36:53 -07:00
cm1_44xx.h OMAP4: CM instances: add clockdomain register offsets 2010-12-21 21:05:15 -07:00
cm2_44xx.h OMAP4: CM instances: add clockdomain register offsets 2010-12-21 21:05:15 -07:00
cm2xxx_3xxx.c OMAP2/3: clockdomain: remove unneeded .clkstctrl_reg, remove some direct CM register accesses 2010-12-21 21:05:15 -07:00
cm2xxx_3xxx.h OMAP2/3: clockdomain: remove unneeded .clkstctrl_reg, remove some direct CM register accesses 2010-12-21 21:05:15 -07:00
cm44xx.c OMAP4: PRCM: add OMAP4-specific accessor/mutator functions 2010-12-21 21:05:14 -07:00
cm44xx.h OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
cm-regbits-24xx.h OMAP2/3: clockdomain: remove unneeded .clkstctrl_reg, remove some direct CM register accesses 2010-12-21 21:05:15 -07:00
cm-regbits-34xx.h OMAP4: clockdomains: add OMAP4 PRCM data and OMAP4 support 2010-12-21 21:05:15 -07:00
cm-regbits-44xx.h OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
cm.h OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
cminst44xx.c OMAP4: clockdomains: add OMAP4 PRCM data and OMAP4 support 2010-12-21 21:05:15 -07:00
cminst44xx.h OMAP4: clockdomains: add OMAP4 PRCM data and OMAP4 support 2010-12-21 21:05:15 -07:00
common.c Merge branches 'devel-cleanup', 'devel-board', 'devel-early-init' and 'devel-ti816x' into omap-for-linus 2011-02-16 11:32:38 -08:00
control.c OMAP3: control/PM: move padconf save code to mach-omap2/control.c 2010-12-21 21:05:16 -07:00
control.h TI816X: Update common OMAP machine specific sources 2011-02-16 08:31:39 -08:00
cpuidle34xx.c Merge branch 'idle-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6 2011-01-13 20:15:18 -08:00
devices.c OMAP4: Initialise the l3 device with the hwmod data. 2011-03-09 17:23:57 +05:30
display.c OMAP2, 3: DSS2: Create new file display.c for central dss driver registration. 2011-02-23 09:33:27 +02:00
dma.c arch/arm/mach-omap2/dma.c: Convert IS_ERR result to PTR_ERR 2011-01-27 16:25:35 -08:00
dpll3xxx.c Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 2011-01-06 19:13:58 -08:00
dsp.c OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" 2010-12-21 21:05:14 -07:00
emu.c omap2/3: Fix initcalls for multi-omap 2010-02-15 09:27:05 -08:00
gpio.c OMAP2+: GPIO: device registration 2010-12-07 16:26:57 -08:00
gpmc-nand.c omap3630: nand: fix device size to work in polled mode 2011-02-17 15:32:52 -08:00
gpmc-onenand.c OMAP: OneNAND: let boards determine OneNAND frequency 2011-02-17 15:44:46 -08:00
gpmc-smc91x.c omap: use smc91x_platdata to setup smc91x 2009-12-11 16:16:33 -08:00
gpmc-smsc911x.c ARM: OMAP3LOGIC: Add generic smsc911x support when connected to GPMC 2010-09-28 11:39:18 -07:00
gpmc.c omap3: nand: configurable fifo threshold to gain the throughput 2011-02-17 15:32:54 -08:00
hsmmc.c OMAP: hsmmc: Rename the device and driver 2011-03-01 13:13:27 -08:00
hsmmc.h Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 2010-10-25 13:46:56 -07:00
hwspinlock.c omap: add hwspinlock device 2011-02-17 09:52:43 -08:00
i2c.c omap: mux: Convert 2420 platform init code to use new mux code 2010-07-05 16:31:40 +03:00
id.c OMAP2+: Common CPU DIE ID reading code reads wrong registers for OMAP4430 2011-03-14 11:12:54 -07:00
io.c omap: gpmc: enable irq mode in gpmc 2011-02-17 15:32:53 -08:00
io.h OMAP: plat-omap: Fix static function warnings 2010-10-08 10:12:38 -07:00
iommu2.c omap: IOMMU: add support to callback during fault handling 2011-02-24 14:23:17 -08:00
irq.c Merge branches 'devel-cleanup', 'devel-board', 'devel-early-init' and 'devel-ti816x' into omap-for-linus 2011-02-16 11:32:38 -08:00
Kconfig omap: select REGULATOR_FIXED_VOLTAGE by default for panda and sdp4430 2011-02-22 08:37:03 -08:00
mailbox.c Merge branches 'devel-iommu-mailbox', 'devel-mcbsp', 'devel-board' and 'devel-hsmmc' into omap-for-linus 2011-03-02 17:11:18 -08:00
Makefile OMAP4: l3: Introduce l3-interconnect error handling driver 2011-03-09 17:23:58 +05:30
Makefile.boot
mcbsp.c OMAP: McBSP: APIs to pass DMA params from McBSP driver to client drivers 2011-02-24 13:03:52 -08:00
mux34xx.c omap3|4: mux: make local structures static 2011-01-06 19:58:28 -08:00
mux34xx.h omap: mux: Add 36xx CBP package support 2009-12-11 16:16:33 -08:00
mux44xx.c omap3|4: mux: make local structures static 2011-01-06 19:58:28 -08:00
mux44xx.h OMAP4: mux: Add CBS package data for OMAP4430 ES2 2010-11-17 12:01:52 +01:00
mux2420.c OMAP: mux: Add __func__ macro to pr_xxx macros 2010-11-17 12:01:54 +01:00
mux2420.h omap: mux: Add data for 2420 2010-07-05 16:31:36 +03:00
mux2430.c OMAP: mux: Add __func__ macro to pr_xxx macros 2010-11-17 12:01:54 +01:00
mux2430.h omap: mux: Add data for 2430 2010-07-05 16:31:36 +03:00
mux.c mach-omap2: mux: world-writable debugfs files 2011-02-04 12:08:06 -08:00
mux.h omap2+: Add struct omap_board_data and use it for platform level serial init 2010-12-22 18:42:35 -08:00
omap4-common.c Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 2011-01-06 19:13:58 -08:00
omap44xx-smc.S omap4: Add smc API to read AuxCoreBoot0 register 2010-08-02 13:18:18 +03:00
omap_hwmod_3xxx_data.c Merge branch 'omap-l3-for-next' of git://dev.omapzoom.org/pub/scm/santosh/kernel-omap4-base into omap-for-linus 2011-03-09 13:15:49 -08:00
omap_hwmod_44xx_data.c OMAP4: hwmod_data: Add address space and irq in L3 hwmod. 2011-03-09 17:23:57 +05:30
omap_hwmod_2420_data.c OMAP2/3: VENC hwmod: add OCPIF_SWSUP_IDLE flag to interface 2011-03-09 13:03:15 -08:00
omap_hwmod_2430_data.c OMAP2/3: VENC hwmod: add OCPIF_SWSUP_IDLE flag to interface 2011-03-09 13:03:15 -08:00
omap_hwmod_common_data.c OMAP: hwmod data: add class for IVA hwmods 2010-07-26 16:34:31 -06:00
omap_hwmod_common_data.h OMAP: hwmod data: add class for IVA hwmods 2010-07-26 16:34:31 -06:00
omap_hwmod.c Merge branches 'devel-iommu-mailbox', 'devel-mcbsp', 'devel-board' and 'devel-hsmmc' into omap-for-linus 2011-03-02 17:11:18 -08:00
omap_l3_noc.c OMAP4: l3: Introduce l3-interconnect error handling driver 2011-03-09 17:23:58 +05:30
omap_l3_noc.h OMAP4: l3: Introduce l3-interconnect error handling driver 2011-03-09 17:23:58 +05:30
omap_l3_smx.c OMAP3: l3: Introduce l3-interconnect error handling driver 2011-03-09 17:23:57 +05:30
omap_l3_smx.h OMAP3: l3: Introduce l3-interconnect error handling driver 2011-03-09 17:23:57 +05:30
omap_opp_data.h omap: opp: add OMAP3 OPP table data and common init 2010-12-21 14:30:40 -08:00
omap_phy_internal.c usb: musb: AM35x: moving internal phy functions out of usb_musb.c file 2011-02-17 17:35:53 +02:00
omap_twl.c OMAP2+: TWL: include pm header for init protos 2011-01-07 13:33:07 -08:00
omap-headsmp.S omap4: Add smc API to read AuxCoreBoot0 register 2010-08-02 13:18:18 +03:00
omap-hotplug.c ARM: CPU hotplug: remove bug checks in platform_cpu_die() 2010-12-20 15:09:10 +00:00
omap-iommu.c OMAP: iommu: make iva2 iommu selectable 2010-12-15 11:33:31 -06:00
omap-smp.c Merge branch 'misc' into devel 2011-01-06 22:32:52 +00:00
opp2xxx.h omap: Start using CONFIG_SOC_OMAP 2011-01-27 16:39:40 -08:00
opp3xxx_data.c omap: opp: add OMAP3 OPP table data and common init 2010-12-21 14:30:40 -08:00
opp4xxx_data.c omap4: opp: add OPP table data 2010-12-21 14:30:40 -08:00
opp2420_data.c OMAP2xxx OPP: clean up comments in OPP data 2010-01-08 15:23:15 -07:00
opp2430_data.c OMAP2xxx OPP: clean up comments in OPP data 2010-01-08 15:23:15 -07:00
opp.c omap: opp: add OMAP3 OPP table data and common init 2010-12-21 14:30:40 -08:00
pm24xx.c console: rename acquire/release_console_sem() to console_lock/unlock() 2011-01-26 10:50:06 +10:00
pm34xx.c Merge branch 'for_2.6.38/pm-fixes' of ssh://master.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into devel-fixes 2011-01-31 13:20:26 -08:00
pm44xx.c Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial 2011-01-13 10:05:56 -08:00
pm_bus.c omap2+: pm_bus: make functions used as pointers as static 2011-01-07 13:33:08 -08:00
pm-debug.c mach-omap2: pm: world-writable debugfs timer files 2011-02-04 12:08:12 -08:00
pm.c OMAP4: PM: Program correct init voltages for scalable VDDs 2010-12-22 14:31:48 -08:00
pm.h OMAP4: Register voltage PMIC parameters with the voltage layer 2010-12-22 14:31:45 -08:00
powerdomain2xxx_3xxx.c OMAP: PRCM: remove duplicated headers 2011-01-18 12:36:53 -07:00
powerdomain44xx.c OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
powerdomain-common.c OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
powerdomain.c OMAP2+: powerdomain: add API to get context loss count 2010-12-21 21:31:55 -07:00
powerdomain.h OMAP2+: powerdomain: add API to get context loss count 2010-12-21 21:31:55 -07:00
powerdomains2xxx_3xxx_data.c OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
powerdomains2xxx_3xxx_data.h OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
powerdomains2xxx_data.c omap: Start using CONFIG_SOC_OMAP 2011-01-27 16:39:40 -08:00
powerdomains3xxx_data.c OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
powerdomains44xx_data.c OMAP4: powerdomain: Remove L3INIT_PD OFF state 2010-12-21 22:37:28 -07:00
prcm44xx.h OMAP4: PRCM: add OMAP4-specific accessor/mutator functions 2010-12-21 21:05:14 -07:00
prcm_mpu44xx.c OMAP4: PRCM: add OMAP4-specific accessor/mutator functions 2010-12-21 21:05:14 -07:00
prcm_mpu44xx.h omap4: prcm: Fix the CPUx clockdomain offsets 2011-02-25 12:45:05 -07:00
prcm-common.h Merge branches 'devel-iommu-mailbox', 'devel-mcbsp', 'devel-board' and 'devel-hsmmc' into omap-for-linus 2011-03-02 17:11:18 -08:00
prcm.c ARM: OMAP: Allow platforms to hook reset cleanly 2011-01-27 16:39:48 -08:00
prm2xxx_3xxx.c OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" 2010-12-21 21:05:14 -07:00
prm2xxx_3xxx.h omap2plus: prm: Trvial build break fix for undefined reference to 'omap2_prm_read_mod_reg' 2011-01-07 13:33:10 -08:00
prm44xx.c OMAP4: PRCM: move global reset function for OMAP4 to an OMAP4-specific file 2010-12-21 21:05:14 -07:00
prm44xx.h OMAP4: CM instances: add clockdomain register offsets 2010-12-21 21:05:15 -07:00
prm-regbits-24xx.h OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
prm-regbits-34xx.h OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
prm-regbits-44xx.h OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
prm.h OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
prminst44xx.c OMAP4: PRCM: add OMAP4-specific accessor/mutator functions 2010-12-21 21:05:14 -07:00
prminst44xx.h OMAP4: PRCM: add OMAP4-specific accessor/mutator functions 2010-12-21 21:05:14 -07:00
scrm44xx.h OMAP4: PRCM: Add SCRM header file 2010-12-21 20:01:54 -07:00
sdram-hynix-h8mbx00u0mer-0em.h
sdram-micron-mt46h32m32lf-6.h
sdram-nokia.c arm: omap: sdram-nokia: add 97.6/195.2 MHz timing data 2010-12-17 15:13:46 -08:00
sdram-nokia.h arm: omap: add sdram-nokia.h 2010-12-17 15:13:44 -08:00
sdram-numonyx-m65kxxxxam.h omap3: SDRC: add timing data for Numonyx M65KxxxxAM 2010-02-17 17:23:20 -08:00
sdram-qimonda-hyb18m512160af-6.h
sdrc2xxx.c OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" 2010-12-21 21:05:14 -07:00
sdrc.c OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
sdrc.h OMAP2+: use global values for the SRAM PA addresses 2010-12-21 14:45:56 -08:00
serial.c OMAP2+: hwmod: rename some init functions 2011-02-28 12:04:35 -07:00
sleep24xx.S
sleep34xx.S OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
smartreflex-class3.c OMAP3: PM: Adding smartreflex class3 driver 2010-12-22 14:31:40 -08:00
smartreflex.c mach-omap2: smartreflex: world-writable debugfs voltage files 2011-02-07 09:55:22 -08:00
sr_device.c OMAP3+: sr_device: include pm header 2011-01-07 13:33:06 -08:00
sram34xx.S OMAP2/3: SRAM: add comment about crashes during a TLB miss 2010-12-21 21:08:14 -07:00
sram242x.S OMAP2/3: SRAM: add comment about crashes during a TLB miss 2010-12-21 21:08:14 -07:00
sram243x.S OMAP2/3: SRAM: add comment about crashes during a TLB miss 2010-12-21 21:08:14 -07:00
timer-gp.c Merge branch 'devel-cleanup' into omap-for-linus 2011-03-02 17:07:14 -08:00
timer-gp.h OMAP2plus: Fix static function warnings 2010-10-08 10:02:49 -07:00
timer-mpu.c omap4: Use irq line defines from irq-44xx.h 2010-02-23 15:29:08 -08:00
usb-ehci.c arm: omap4: usb: add platform init code for EHCI 2010-12-01 02:42:13 +05:30
usb-fs.c OMAP: control: move plat-omap/control.h to mach-omap2/control.h 2010-10-08 11:40:20 -06:00
usb-musb.c OMAP2+: musb: hwmod adaptation for musb registration 2011-02-17 18:34:00 +02:00
usb-tusb6010.c Merge branch 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 2011-01-07 13:16:28 -08:00
voltage.c arm: mach-omap2: voltage: debugfs: fix memory leak 2011-01-31 12:59:14 -08:00
wd_timer.c omap2+: wdt: trivial sparse fixes 2011-01-06 19:58:28 -08:00
wd_timer.h OMAP2+: wd_timer: separate watchdog disable code from the rest of mach-omap2/devices.c 2010-12-21 19:56:17 -07:00