mirror of
https://github.com/torvalds/linux.git
synced 2024-11-17 09:31:50 +00:00
cf49939198
In preparation of removing the .ack_interrupt() callback, we must replace its occurrences (aka phy_clear_interrupt), from the 2 places where it is called from (phy_enable_interrupts and phy_disable_interrupts), with equivalent functionality. This means that clearing interrupts now becomes something that the PHY driver is responsible of doing, before enabling interrupts and after clearing them. Make this driver follow the new contract. Cc: Nisar Sayed <Nisar.Sayed@microchip.com> Cc: Yuiko Oshino <yuiko.oshino@microchip.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
381 lines
9.8 KiB
C
381 lines
9.8 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2015 Microchip Technology
|
|
*/
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mii.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/phy.h>
|
|
#include <linux/microchipphy.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/of.h>
|
|
#include <dt-bindings/net/microchip-lan78xx.h>
|
|
|
|
#define DRIVER_AUTHOR "WOOJUNG HUH <woojung.huh@microchip.com>"
|
|
#define DRIVER_DESC "Microchip LAN88XX PHY driver"
|
|
|
|
struct lan88xx_priv {
|
|
int chip_id;
|
|
int chip_rev;
|
|
__u32 wolopts;
|
|
};
|
|
|
|
static int lan88xx_read_page(struct phy_device *phydev)
|
|
{
|
|
return __phy_read(phydev, LAN88XX_EXT_PAGE_ACCESS);
|
|
}
|
|
|
|
static int lan88xx_write_page(struct phy_device *phydev, int page)
|
|
{
|
|
return __phy_write(phydev, LAN88XX_EXT_PAGE_ACCESS, page);
|
|
}
|
|
|
|
static int lan88xx_phy_config_intr(struct phy_device *phydev)
|
|
{
|
|
int rc;
|
|
|
|
if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
|
|
/* unmask all source and clear them before enable */
|
|
rc = phy_write(phydev, LAN88XX_INT_MASK, 0x7FFF);
|
|
rc = phy_read(phydev, LAN88XX_INT_STS);
|
|
rc = phy_write(phydev, LAN88XX_INT_MASK,
|
|
LAN88XX_INT_MASK_MDINTPIN_EN_ |
|
|
LAN88XX_INT_MASK_LINK_CHANGE_);
|
|
} else {
|
|
rc = phy_write(phydev, LAN88XX_INT_MASK, 0);
|
|
if (rc)
|
|
return rc;
|
|
|
|
/* Ack interrupts after they have been disabled */
|
|
rc = phy_read(phydev, LAN88XX_INT_STS);
|
|
}
|
|
|
|
return rc < 0 ? rc : 0;
|
|
}
|
|
|
|
static irqreturn_t lan88xx_handle_interrupt(struct phy_device *phydev)
|
|
{
|
|
int irq_status;
|
|
|
|
irq_status = phy_read(phydev, LAN88XX_INT_STS);
|
|
if (irq_status < 0) {
|
|
phy_error(phydev);
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
if (!(irq_status & LAN88XX_INT_STS_LINK_CHANGE_))
|
|
return IRQ_NONE;
|
|
|
|
phy_trigger_machine(phydev);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int lan88xx_suspend(struct phy_device *phydev)
|
|
{
|
|
struct lan88xx_priv *priv = phydev->priv;
|
|
|
|
/* do not power down PHY when WOL is enabled */
|
|
if (!priv->wolopts)
|
|
genphy_suspend(phydev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lan88xx_TR_reg_set(struct phy_device *phydev, u16 regaddr,
|
|
u32 data)
|
|
{
|
|
int val, save_page, ret = 0;
|
|
u16 buf;
|
|
|
|
/* Save current page */
|
|
save_page = phy_save_page(phydev);
|
|
if (save_page < 0) {
|
|
phydev_warn(phydev, "Failed to get current page\n");
|
|
goto err;
|
|
}
|
|
|
|
/* Switch to TR page */
|
|
lan88xx_write_page(phydev, LAN88XX_EXT_PAGE_ACCESS_TR);
|
|
|
|
ret = __phy_write(phydev, LAN88XX_EXT_PAGE_TR_LOW_DATA,
|
|
(data & 0xFFFF));
|
|
if (ret < 0) {
|
|
phydev_warn(phydev, "Failed to write TR low data\n");
|
|
goto err;
|
|
}
|
|
|
|
ret = __phy_write(phydev, LAN88XX_EXT_PAGE_TR_HIGH_DATA,
|
|
(data & 0x00FF0000) >> 16);
|
|
if (ret < 0) {
|
|
phydev_warn(phydev, "Failed to write TR high data\n");
|
|
goto err;
|
|
}
|
|
|
|
/* Config control bits [15:13] of register */
|
|
buf = (regaddr & ~(0x3 << 13));/* Clr [14:13] to write data in reg */
|
|
buf |= 0x8000; /* Set [15] to Packet transmit */
|
|
|
|
ret = __phy_write(phydev, LAN88XX_EXT_PAGE_TR_CR, buf);
|
|
if (ret < 0) {
|
|
phydev_warn(phydev, "Failed to write data in reg\n");
|
|
goto err;
|
|
}
|
|
|
|
usleep_range(1000, 2000);/* Wait for Data to be written */
|
|
val = __phy_read(phydev, LAN88XX_EXT_PAGE_TR_CR);
|
|
if (!(val & 0x8000))
|
|
phydev_warn(phydev, "TR Register[0x%X] configuration failed\n",
|
|
regaddr);
|
|
err:
|
|
return phy_restore_page(phydev, save_page, ret);
|
|
}
|
|
|
|
static void lan88xx_config_TR_regs(struct phy_device *phydev)
|
|
{
|
|
int err;
|
|
|
|
/* Get access to Channel 0x1, Node 0xF , Register 0x01.
|
|
* Write 24-bit value 0x12B00A to register. Setting MrvlTrFix1000Kf,
|
|
* MrvlTrFix1000Kp, MasterEnableTR bits.
|
|
*/
|
|
err = lan88xx_TR_reg_set(phydev, 0x0F82, 0x12B00A);
|
|
if (err < 0)
|
|
phydev_warn(phydev, "Failed to Set Register[0x0F82]\n");
|
|
|
|
/* Get access to Channel b'10, Node b'1101, Register 0x06.
|
|
* Write 24-bit value 0xD2C46F to register. Setting SSTrKf1000Slv,
|
|
* SSTrKp1000Mas bits.
|
|
*/
|
|
err = lan88xx_TR_reg_set(phydev, 0x168C, 0xD2C46F);
|
|
if (err < 0)
|
|
phydev_warn(phydev, "Failed to Set Register[0x168C]\n");
|
|
|
|
/* Get access to Channel b'10, Node b'1111, Register 0x11.
|
|
* Write 24-bit value 0x620 to register. Setting rem_upd_done_thresh
|
|
* bits
|
|
*/
|
|
err = lan88xx_TR_reg_set(phydev, 0x17A2, 0x620);
|
|
if (err < 0)
|
|
phydev_warn(phydev, "Failed to Set Register[0x17A2]\n");
|
|
|
|
/* Get access to Channel b'10, Node b'1101, Register 0x10.
|
|
* Write 24-bit value 0xEEFFDD to register. Setting
|
|
* eee_TrKp1Long_1000, eee_TrKp2Long_1000, eee_TrKp3Long_1000,
|
|
* eee_TrKp1Short_1000,eee_TrKp2Short_1000, eee_TrKp3Short_1000 bits.
|
|
*/
|
|
err = lan88xx_TR_reg_set(phydev, 0x16A0, 0xEEFFDD);
|
|
if (err < 0)
|
|
phydev_warn(phydev, "Failed to Set Register[0x16A0]\n");
|
|
|
|
/* Get access to Channel b'10, Node b'1101, Register 0x13.
|
|
* Write 24-bit value 0x071448 to register. Setting
|
|
* slv_lpi_tr_tmr_val1, slv_lpi_tr_tmr_val2 bits.
|
|
*/
|
|
err = lan88xx_TR_reg_set(phydev, 0x16A6, 0x071448);
|
|
if (err < 0)
|
|
phydev_warn(phydev, "Failed to Set Register[0x16A6]\n");
|
|
|
|
/* Get access to Channel b'10, Node b'1101, Register 0x12.
|
|
* Write 24-bit value 0x13132F to register. Setting
|
|
* slv_sigdet_timer_val1, slv_sigdet_timer_val2 bits.
|
|
*/
|
|
err = lan88xx_TR_reg_set(phydev, 0x16A4, 0x13132F);
|
|
if (err < 0)
|
|
phydev_warn(phydev, "Failed to Set Register[0x16A4]\n");
|
|
|
|
/* Get access to Channel b'10, Node b'1101, Register 0x14.
|
|
* Write 24-bit value 0x0 to register. Setting eee_3level_delay,
|
|
* eee_TrKf_freeze_delay bits.
|
|
*/
|
|
err = lan88xx_TR_reg_set(phydev, 0x16A8, 0x0);
|
|
if (err < 0)
|
|
phydev_warn(phydev, "Failed to Set Register[0x16A8]\n");
|
|
|
|
/* Get access to Channel b'01, Node b'1111, Register 0x34.
|
|
* Write 24-bit value 0x91B06C to register. Setting
|
|
* FastMseSearchThreshLong1000, FastMseSearchThreshShort1000,
|
|
* FastMseSearchUpdGain1000 bits.
|
|
*/
|
|
err = lan88xx_TR_reg_set(phydev, 0x0FE8, 0x91B06C);
|
|
if (err < 0)
|
|
phydev_warn(phydev, "Failed to Set Register[0x0FE8]\n");
|
|
|
|
/* Get access to Channel b'01, Node b'1111, Register 0x3E.
|
|
* Write 24-bit value 0xC0A028 to register. Setting
|
|
* FastMseKp2ThreshLong1000, FastMseKp2ThreshShort1000,
|
|
* FastMseKp2UpdGain1000, FastMseKp2ExitEn1000 bits.
|
|
*/
|
|
err = lan88xx_TR_reg_set(phydev, 0x0FFC, 0xC0A028);
|
|
if (err < 0)
|
|
phydev_warn(phydev, "Failed to Set Register[0x0FFC]\n");
|
|
|
|
/* Get access to Channel b'01, Node b'1111, Register 0x35.
|
|
* Write 24-bit value 0x041600 to register. Setting
|
|
* FastMseSearchPhShNum1000, FastMseSearchClksPerPh1000,
|
|
* FastMsePhChangeDelay1000 bits.
|
|
*/
|
|
err = lan88xx_TR_reg_set(phydev, 0x0FEA, 0x041600);
|
|
if (err < 0)
|
|
phydev_warn(phydev, "Failed to Set Register[0x0FEA]\n");
|
|
|
|
/* Get access to Channel b'10, Node b'1101, Register 0x03.
|
|
* Write 24-bit value 0x000004 to register. Setting TrFreeze bits.
|
|
*/
|
|
err = lan88xx_TR_reg_set(phydev, 0x1686, 0x000004);
|
|
if (err < 0)
|
|
phydev_warn(phydev, "Failed to Set Register[0x1686]\n");
|
|
}
|
|
|
|
static int lan88xx_probe(struct phy_device *phydev)
|
|
{
|
|
struct device *dev = &phydev->mdio.dev;
|
|
struct lan88xx_priv *priv;
|
|
u32 led_modes[4];
|
|
int len;
|
|
|
|
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
priv->wolopts = 0;
|
|
|
|
len = of_property_read_variable_u32_array(dev->of_node,
|
|
"microchip,led-modes",
|
|
led_modes,
|
|
0,
|
|
ARRAY_SIZE(led_modes));
|
|
if (len >= 0) {
|
|
u32 reg = 0;
|
|
int i;
|
|
|
|
for (i = 0; i < len; i++) {
|
|
if (led_modes[i] > 15)
|
|
return -EINVAL;
|
|
reg |= led_modes[i] << (i * 4);
|
|
}
|
|
for (; i < ARRAY_SIZE(led_modes); i++)
|
|
reg |= LAN78XX_FORCE_LED_OFF << (i * 4);
|
|
(void)phy_write(phydev, LAN78XX_PHY_LED_MODE_SELECT, reg);
|
|
} else if (len == -EOVERFLOW) {
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* these values can be used to identify internal PHY */
|
|
priv->chip_id = phy_read_mmd(phydev, 3, LAN88XX_MMD3_CHIP_ID);
|
|
priv->chip_rev = phy_read_mmd(phydev, 3, LAN88XX_MMD3_CHIP_REV);
|
|
|
|
phydev->priv = priv;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void lan88xx_remove(struct phy_device *phydev)
|
|
{
|
|
struct device *dev = &phydev->mdio.dev;
|
|
struct lan88xx_priv *priv = phydev->priv;
|
|
|
|
if (priv)
|
|
devm_kfree(dev, priv);
|
|
}
|
|
|
|
static int lan88xx_set_wol(struct phy_device *phydev,
|
|
struct ethtool_wolinfo *wol)
|
|
{
|
|
struct lan88xx_priv *priv = phydev->priv;
|
|
|
|
priv->wolopts = wol->wolopts;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void lan88xx_set_mdix(struct phy_device *phydev)
|
|
{
|
|
int buf;
|
|
int val;
|
|
|
|
switch (phydev->mdix_ctrl) {
|
|
case ETH_TP_MDI:
|
|
val = LAN88XX_EXT_MODE_CTRL_MDI_;
|
|
break;
|
|
case ETH_TP_MDI_X:
|
|
val = LAN88XX_EXT_MODE_CTRL_MDI_X_;
|
|
break;
|
|
case ETH_TP_MDI_AUTO:
|
|
val = LAN88XX_EXT_MODE_CTRL_AUTO_MDIX_;
|
|
break;
|
|
default:
|
|
return;
|
|
}
|
|
|
|
phy_write(phydev, LAN88XX_EXT_PAGE_ACCESS, LAN88XX_EXT_PAGE_SPACE_1);
|
|
buf = phy_read(phydev, LAN88XX_EXT_MODE_CTRL);
|
|
buf &= ~LAN88XX_EXT_MODE_CTRL_MDIX_MASK_;
|
|
buf |= val;
|
|
phy_write(phydev, LAN88XX_EXT_MODE_CTRL, buf);
|
|
phy_write(phydev, LAN88XX_EXT_PAGE_ACCESS, LAN88XX_EXT_PAGE_SPACE_0);
|
|
}
|
|
|
|
static int lan88xx_config_init(struct phy_device *phydev)
|
|
{
|
|
int val;
|
|
|
|
/*Zerodetect delay enable */
|
|
val = phy_read_mmd(phydev, MDIO_MMD_PCS,
|
|
PHY_ARDENNES_MMD_DEV_3_PHY_CFG);
|
|
val |= PHY_ARDENNES_MMD_DEV_3_PHY_CFG_ZD_DLY_EN_;
|
|
|
|
phy_write_mmd(phydev, MDIO_MMD_PCS, PHY_ARDENNES_MMD_DEV_3_PHY_CFG,
|
|
val);
|
|
|
|
/* Config DSP registers */
|
|
lan88xx_config_TR_regs(phydev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lan88xx_config_aneg(struct phy_device *phydev)
|
|
{
|
|
lan88xx_set_mdix(phydev);
|
|
|
|
return genphy_config_aneg(phydev);
|
|
}
|
|
|
|
static struct phy_driver microchip_phy_driver[] = {
|
|
{
|
|
.phy_id = 0x0007c130,
|
|
.phy_id_mask = 0xfffffff0,
|
|
.name = "Microchip LAN88xx",
|
|
|
|
/* PHY_GBIT_FEATURES */
|
|
|
|
.probe = lan88xx_probe,
|
|
.remove = lan88xx_remove,
|
|
|
|
.config_init = lan88xx_config_init,
|
|
.config_aneg = lan88xx_config_aneg,
|
|
|
|
.config_intr = lan88xx_phy_config_intr,
|
|
.handle_interrupt = lan88xx_handle_interrupt,
|
|
|
|
.suspend = lan88xx_suspend,
|
|
.resume = genphy_resume,
|
|
.set_wol = lan88xx_set_wol,
|
|
.read_page = lan88xx_read_page,
|
|
.write_page = lan88xx_write_page,
|
|
} };
|
|
|
|
module_phy_driver(microchip_phy_driver);
|
|
|
|
static struct mdio_device_id __maybe_unused microchip_tbl[] = {
|
|
{ 0x0007c130, 0xfffffff0 },
|
|
{ }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(mdio, microchip_tbl);
|
|
|
|
MODULE_AUTHOR(DRIVER_AUTHOR);
|
|
MODULE_DESCRIPTION(DRIVER_DESC);
|
|
MODULE_LICENSE("GPL");
|