mirror of
https://github.com/torvalds/linux.git
synced 2024-11-18 10:01:43 +00:00
9cb6abcb26
Remove the check for CONFIG_PPC_85xx and CONFIG_PPC_86xx from fsl_guts.h. The check was originally intended to allow the same header file to be used on 85xx and 86xx systems, even though the Global Utilities register could be different. It turns out that they're not actually different, and so the check is not necessary. In addition, neither macro is defined for 64-bit e5500 kernels, so that causes a build break. Signed-off-by: Timur Tabi <timur@freescale.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
186 lines
7.6 KiB
C
186 lines
7.6 KiB
C
/**
|
|
* Freecale 85xx and 86xx Global Utilties register set
|
|
*
|
|
* Authors: Jeff Brown
|
|
* Timur Tabi <timur@freescale.com>
|
|
*
|
|
* Copyright 2004,2007,2012 Freescale Semiconductor, Inc
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
|
|
#ifndef __ASM_POWERPC_FSL_GUTS_H__
|
|
#define __ASM_POWERPC_FSL_GUTS_H__
|
|
#ifdef __KERNEL__
|
|
|
|
/**
|
|
* Global Utility Registers.
|
|
*
|
|
* Not all registers defined in this structure are available on all chips, so
|
|
* you are expected to know whether a given register actually exists on your
|
|
* chip before you access it.
|
|
*
|
|
* Also, some registers are similar on different chips but have slightly
|
|
* different names. In these cases, one name is chosen to avoid extraneous
|
|
* #ifdefs.
|
|
*/
|
|
struct ccsr_guts {
|
|
__be32 porpllsr; /* 0x.0000 - POR PLL Ratio Status Register */
|
|
__be32 porbmsr; /* 0x.0004 - POR Boot Mode Status Register */
|
|
__be32 porimpscr; /* 0x.0008 - POR I/O Impedance Status and Control Register */
|
|
__be32 pordevsr; /* 0x.000c - POR I/O Device Status Register */
|
|
__be32 pordbgmsr; /* 0x.0010 - POR Debug Mode Status Register */
|
|
__be32 pordevsr2; /* 0x.0014 - POR device status register 2 */
|
|
u8 res018[0x20 - 0x18];
|
|
__be32 porcir; /* 0x.0020 - POR Configuration Information Register */
|
|
u8 res024[0x30 - 0x24];
|
|
__be32 gpiocr; /* 0x.0030 - GPIO Control Register */
|
|
u8 res034[0x40 - 0x34];
|
|
__be32 gpoutdr; /* 0x.0040 - General-Purpose Output Data Register */
|
|
u8 res044[0x50 - 0x44];
|
|
__be32 gpindr; /* 0x.0050 - General-Purpose Input Data Register */
|
|
u8 res054[0x60 - 0x54];
|
|
__be32 pmuxcr; /* 0x.0060 - Alternate Function Signal Multiplex Control */
|
|
__be32 pmuxcr2; /* 0x.0064 - Alternate function signal multiplex control 2 */
|
|
__be32 dmuxcr; /* 0x.0068 - DMA Mux Control Register */
|
|
u8 res06c[0x70 - 0x6c];
|
|
__be32 devdisr; /* 0x.0070 - Device Disable Control */
|
|
__be32 devdisr2; /* 0x.0074 - Device Disable Control 2 */
|
|
u8 res078[0x7c - 0x78];
|
|
__be32 pmjcr; /* 0x.007c - 4 Power Management Jog Control Register */
|
|
__be32 powmgtcsr; /* 0x.0080 - Power Management Status and Control Register */
|
|
__be32 pmrccr; /* 0x.0084 - Power Management Reset Counter Configuration Register */
|
|
__be32 pmpdccr; /* 0x.0088 - Power Management Power Down Counter Configuration Register */
|
|
__be32 pmcdr; /* 0x.008c - 4Power management clock disable register */
|
|
__be32 mcpsumr; /* 0x.0090 - Machine Check Summary Register */
|
|
__be32 rstrscr; /* 0x.0094 - Reset Request Status and Control Register */
|
|
__be32 ectrstcr; /* 0x.0098 - Exception reset control register */
|
|
__be32 autorstsr; /* 0x.009c - Automatic reset status register */
|
|
__be32 pvr; /* 0x.00a0 - Processor Version Register */
|
|
__be32 svr; /* 0x.00a4 - System Version Register */
|
|
u8 res0a8[0xb0 - 0xa8];
|
|
__be32 rstcr; /* 0x.00b0 - Reset Control Register */
|
|
u8 res0b4[0xc0 - 0xb4];
|
|
__be32 iovselsr; /* 0x.00c0 - I/O voltage select status register
|
|
Called 'elbcvselcr' on 86xx SOCs */
|
|
u8 res0c4[0x224 - 0xc4];
|
|
__be32 iodelay1; /* 0x.0224 - IO delay control register 1 */
|
|
__be32 iodelay2; /* 0x.0228 - IO delay control register 2 */
|
|
u8 res22c[0x800 - 0x22c];
|
|
__be32 clkdvdr; /* 0x.0800 - Clock Divide Register */
|
|
u8 res804[0x900 - 0x804];
|
|
__be32 ircr; /* 0x.0900 - Infrared Control Register */
|
|
u8 res904[0x908 - 0x904];
|
|
__be32 dmacr; /* 0x.0908 - DMA Control Register */
|
|
u8 res90c[0x914 - 0x90c];
|
|
__be32 elbccr; /* 0x.0914 - eLBC Control Register */
|
|
u8 res918[0xb20 - 0x918];
|
|
__be32 ddr1clkdr; /* 0x.0b20 - DDR1 Clock Disable Register */
|
|
__be32 ddr2clkdr; /* 0x.0b24 - DDR2 Clock Disable Register */
|
|
__be32 ddrclkdr; /* 0x.0b28 - DDR Clock Disable Register */
|
|
u8 resb2c[0xe00 - 0xb2c];
|
|
__be32 clkocr; /* 0x.0e00 - Clock Out Select Register */
|
|
u8 rese04[0xe10 - 0xe04];
|
|
__be32 ddrdllcr; /* 0x.0e10 - DDR DLL Control Register */
|
|
u8 rese14[0xe20 - 0xe14];
|
|
__be32 lbcdllcr; /* 0x.0e20 - LBC DLL Control Register */
|
|
__be32 cpfor; /* 0x.0e24 - L2 charge pump fuse override register */
|
|
u8 rese28[0xf04 - 0xe28];
|
|
__be32 srds1cr0; /* 0x.0f04 - SerDes1 Control Register 0 */
|
|
__be32 srds1cr1; /* 0x.0f08 - SerDes1 Control Register 0 */
|
|
u8 resf0c[0xf2c - 0xf0c];
|
|
__be32 itcr; /* 0x.0f2c - Internal transaction control register */
|
|
u8 resf30[0xf40 - 0xf30];
|
|
__be32 srds2cr0; /* 0x.0f40 - SerDes2 Control Register 0 */
|
|
__be32 srds2cr1; /* 0x.0f44 - SerDes2 Control Register 0 */
|
|
} __attribute__ ((packed));
|
|
|
|
|
|
/* Alternate function signal multiplex control */
|
|
#define MPC85xx_PMUXCR_QE(x) (0x8000 >> (x))
|
|
|
|
#ifdef CONFIG_PPC_86xx
|
|
|
|
#define CCSR_GUTS_DMACR_DEV_SSI 0 /* DMA controller/channel set to SSI */
|
|
#define CCSR_GUTS_DMACR_DEV_IR 1 /* DMA controller/channel set to IR */
|
|
|
|
/*
|
|
* Set the DMACR register in the GUTS
|
|
*
|
|
* The DMACR register determines the source of initiated transfers for each
|
|
* channel on each DMA controller. Rather than have a bunch of repetitive
|
|
* macros for the bit patterns, we just have a function that calculates
|
|
* them.
|
|
*
|
|
* guts: Pointer to GUTS structure
|
|
* co: The DMA controller (0 or 1)
|
|
* ch: The channel on the DMA controller (0, 1, 2, or 3)
|
|
* device: The device to set as the source (CCSR_GUTS_DMACR_DEV_xx)
|
|
*/
|
|
static inline void guts_set_dmacr(struct ccsr_guts __iomem *guts,
|
|
unsigned int co, unsigned int ch, unsigned int device)
|
|
{
|
|
unsigned int shift = 16 + (8 * (1 - co) + 2 * (3 - ch));
|
|
|
|
clrsetbits_be32(&guts->dmacr, 3 << shift, device << shift);
|
|
}
|
|
|
|
#define CCSR_GUTS_PMUXCR_LDPSEL 0x00010000
|
|
#define CCSR_GUTS_PMUXCR_SSI1_MASK 0x0000C000 /* Bitmask for SSI1 */
|
|
#define CCSR_GUTS_PMUXCR_SSI1_LA 0x00000000 /* Latched address */
|
|
#define CCSR_GUTS_PMUXCR_SSI1_HI 0x00004000 /* High impedance */
|
|
#define CCSR_GUTS_PMUXCR_SSI1_SSI 0x00008000 /* Used for SSI1 */
|
|
#define CCSR_GUTS_PMUXCR_SSI2_MASK 0x00003000 /* Bitmask for SSI2 */
|
|
#define CCSR_GUTS_PMUXCR_SSI2_LA 0x00000000 /* Latched address */
|
|
#define CCSR_GUTS_PMUXCR_SSI2_HI 0x00001000 /* High impedance */
|
|
#define CCSR_GUTS_PMUXCR_SSI2_SSI 0x00002000 /* Used for SSI2 */
|
|
#define CCSR_GUTS_PMUXCR_LA_22_25_LA 0x00000000 /* Latched Address */
|
|
#define CCSR_GUTS_PMUXCR_LA_22_25_HI 0x00000400 /* High impedance */
|
|
#define CCSR_GUTS_PMUXCR_DBGDRV 0x00000200 /* Signals not driven */
|
|
#define CCSR_GUTS_PMUXCR_DMA2_0 0x00000008
|
|
#define CCSR_GUTS_PMUXCR_DMA2_3 0x00000004
|
|
#define CCSR_GUTS_PMUXCR_DMA1_0 0x00000002
|
|
#define CCSR_GUTS_PMUXCR_DMA1_3 0x00000001
|
|
|
|
/*
|
|
* Set the DMA external control bits in the GUTS
|
|
*
|
|
* The DMA external control bits in the PMUXCR are only meaningful for
|
|
* channels 0 and 3. Any other channels are ignored.
|
|
*
|
|
* guts: Pointer to GUTS structure
|
|
* co: The DMA controller (0 or 1)
|
|
* ch: The channel on the DMA controller (0, 1, 2, or 3)
|
|
* value: the new value for the bit (0 or 1)
|
|
*/
|
|
static inline void guts_set_pmuxcr_dma(struct ccsr_guts __iomem *guts,
|
|
unsigned int co, unsigned int ch, unsigned int value)
|
|
{
|
|
if ((ch == 0) || (ch == 3)) {
|
|
unsigned int shift = 2 * (co + 1) - (ch & 1) - 1;
|
|
|
|
clrsetbits_be32(&guts->pmuxcr, 1 << shift, value << shift);
|
|
}
|
|
}
|
|
|
|
#define CCSR_GUTS_CLKDVDR_PXCKEN 0x80000000
|
|
#define CCSR_GUTS_CLKDVDR_SSICKEN 0x20000000
|
|
#define CCSR_GUTS_CLKDVDR_PXCKINV 0x10000000
|
|
#define CCSR_GUTS_CLKDVDR_PXCKDLY_SHIFT 25
|
|
#define CCSR_GUTS_CLKDVDR_PXCKDLY_MASK 0x06000000
|
|
#define CCSR_GUTS_CLKDVDR_PXCKDLY(x) \
|
|
(((x) & 3) << CCSR_GUTS_CLKDVDR_PXCKDLY_SHIFT)
|
|
#define CCSR_GUTS_CLKDVDR_PXCLK_SHIFT 16
|
|
#define CCSR_GUTS_CLKDVDR_PXCLK_MASK 0x001F0000
|
|
#define CCSR_GUTS_CLKDVDR_PXCLK(x) (((x) & 31) << CCSR_GUTS_CLKDVDR_PXCLK_SHIFT)
|
|
#define CCSR_GUTS_CLKDVDR_SSICLK_MASK 0x000000FF
|
|
#define CCSR_GUTS_CLKDVDR_SSICLK(x) ((x) & CCSR_GUTS_CLKDVDR_SSICLK_MASK)
|
|
|
|
#endif
|
|
|
|
#endif
|
|
#endif
|