linux/arch/powerpc
Prabhakar Kushwaha d729b900e5 powerpc/85xx: Add BSC9131 RDB Support
BSC9131RDB is a Freescale reference design board for BSC9131 SoC. The
BSC9131 is integrated SoC that targets Femto base station market. It
combines Power Architecture e500v2 and DSP StarCore SC3850 core
technologies with MAPLE-B2F baseband acceleration processing elements.

The BSC9131 SoC includes the following function and features:
    . Power Architecture subsystem including a e500 processor with 256-Kbyte
    shared L2 cache
    . StarCore SC3850 DSP subsystem with a 512-Kbyte private L2 cache
    . The Multi Accelerator Platform Engine for Femto BaseStation Baseband
      Processing (MAPLE-B2F)
    . A multi-standard baseband algorithm accelerator for Channel
      Decoding/Encoding, Fourier Transforms, UMTS chip rate processing, LTE
      UP/DL Channel processing, and CRC algorithms
    . Consists of accelerators for Convolution, Filtering, Turbo Encoding,
      Turbo Decoding, Viterbi decoding, Chiprate processing, and Matrix
      Inversion operations
    . DDR3/3L memory interface with 32-bit data width without ECC and 16-bit
      with ECC, up to 400-MHz clock/800 MHz data rate
    . Dedicated security engine featuring trusted boot
    . DMA controller
    . OCNDMA with four bidirectional channels
    . Interfaces
    . Two triple-speed Gigabit Ethernet controllers featuring network
      acceleration including IEEE 1588. v2 hardware support and
      virtualization (eTSEC)
    . eTSEC 1 supports RGMII/RMII
    . eTSEC 2 supports RGMII
    . High-speed USB 2.0 host and device controller with ULPI interface
    . Enhanced secure digital (SD/MMC) host controller (eSDHC)
    . Antenna interface controller (AIC), supporting three industry standard
      JESD207/three custom ADI RF interfaces (two dual port and one single
      port) and three MAXIM's MaxPHY serial interfaces
    . ADI lanes support both full duplex FDD support and half duplex TDD
      support
    . Universal Subscriber Identity Module (USIM) interface that facilitates
      communication to SIM cards or Eurochip pre-paid phone cards
    . TDM with one TDM port
    . Two DUART, four eSPI, and two I2C controllers
    . Integrated Flash memory controller (IFC)
    . TDM with 256 channels
    . GPIO
    . Sixteen 32-bit timers

The DSP portion of the SoC consists of DSP core (SC3850) and various
accelerators pertaining to DSP operations.

 BSC9131RDB Overview
 ----------------------
    BSC9131 SoC
    1Gbyte DDR3 (on board DDR)
    128Mbyte 2K page size NAND Flash
    256 Kbit M24256 I2C EEPROM
    128 Mbit SPI Flash memory
    USB-ULPI
    eTSEC1: Connected to RGMII PHY
    eTSEC2: Connected to RGMII PHY
    DUART interface: supports one UARTs up to 115200 bps for console display

 Linux runs on e500v2 core and access some DSP peripherals like AIC

Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
Signed-off-by: Akhil Goyal <Akhil.Goyal@freescale.com>
Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Rajan Srivastava <rajan.srivastava@freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-07-10 07:07:22 -05:00
..
boot powerpc/85xx: Add BSC9131 RDB Support 2012-07-10 07:07:22 -05:00
configs Revert "powerpc/p3060qds: Add support for P3060QDS board" 2012-07-10 07:07:22 -05:00
include/asm powerpc: IOMMU fault injection 2012-07-10 19:18:59 +10:00
kernel powerpc: IOMMU fault injection 2012-07-10 19:18:59 +10:00
kvm powerpc: Enforce usage of R0-R31 where possible 2012-07-10 19:18:30 +10:00
lib powerpc: Fixes for instructions not using correct register naming 2012-07-10 19:18:16 +10:00
math-emu powerpc/math_emu/efp: Look for errata handler when type mismatches 2011-10-06 23:36:47 -05:00
mm powerpc: Enforce usage of RA 0-R31 where possible 2012-07-10 19:18:35 +10:00
net powerpc: Start using ___PPC_RA/B/S/T where necessary 2012-07-10 19:18:25 +10:00
oprofile Disintegrate asm/system.h for PowerPC 2012-03-28 18:30:02 +01:00
perf powerpc/perf: Use perf_instruction_pointer in callchains 2012-07-10 19:18:46 +10:00
platforms powerpc/85xx: Add BSC9131 RDB Support 2012-07-10 07:07:22 -05:00
sysdev powerpc/fsl/pci: Fix when quirk_fsl_pcie_header is freed up 2012-07-10 07:07:19 -05:00
xmon powerpc/xmon: Use cpumask iterator to avoid warning 2012-07-02 14:30:11 +10:00
Kconfig powerpc: Use the new generic strncpy_from_user() and strnlen_user() 2012-05-27 21:00:07 -07:00
Kconfig.debug powerpc: IOMMU fault injection 2012-07-10 19:18:59 +10:00
Makefile powerpc/crypto: Build files for the nx device driver 2012-05-16 15:05:45 +10:00
relocs_check.pl powerpc: Process dynamic relocations for kernel 2011-12-20 10:21:08 -05:00