..
am35x.c
usb: musb: am35x: fix build warnings
2015-05-27 12:29:57 -05:00
blackfin.c
usb: musb: Set up function pointers for DMA
2015-05-07 13:35:51 -05:00
blackfin.h
cppi_dma.c
usb: musb: Set up function pointers for DMA
2015-05-07 13:35:51 -05:00
cppi_dma.h
da8xx.c
usb: musb: Set up function pointers for DMA
2015-05-07 13:35:51 -05:00
davinci.c
usb: musb: Set up function pointers for DMA
2015-05-07 13:35:51 -05:00
davinci.h
jz4740.c
usb: musb: Set up function pointers for DMA
2015-05-07 13:35:51 -05:00
Kconfig
usb: musb: Allow building in all the DMA code
2015-08-03 09:48:35 -05:00
Makefile
usb: musb: sunxi: Add support for the Allwinner sunxi musb controller
2015-07-29 09:59:20 -05:00
musb_am335x.c
usb: musb: Fix panic upon musb_am335x module removal
2014-06-27 10:53:06 -05:00
musb_core.c
usb: musb: enable usb_dma parameter
2015-11-17 11:35:49 -06:00
musb_core.h
usb: musb: core: add common method of getting vbus status
2015-10-16 10:26:22 -05:00
musb_cppi41.c
usb: musb: fix cppi channel teardown for isoch transfer
2015-09-21 14:42:36 -05:00
musb_debug.h
musb_debugfs.c
usb: musb: add softconnect for host mode
2015-05-07 13:49:23 -05:00
musb_dma.h
usb: musb: Set up function pointers for DMA
2015-05-07 13:35:51 -05:00
musb_dsps.c
usb: common: of_usb_get_dr_mode to usb_get_dr_mode
2015-09-27 10:54:31 -05:00
musb_gadget_ep0.c
usb: musb: gadget: use common is_selfpowered
2015-01-29 10:35:43 -06:00
musb_gadget.c
usb: musb: gadget: fix build break by adding missing 'break'
2015-08-07 09:25:46 -05:00
musb_gadget.h
usb: musb: add Kconfig options for HOST, GAGDET or DUAL_ROLE modes
2013-05-28 19:22:23 +03:00
musb_host.c
usb: musb: fix tx fifo flush handling
2015-11-17 11:35:48 -06:00
musb_host.h
usb: musb: fix prototype for musb_port_reset
2013-12-20 15:05:43 -06:00
musb_io.h
usb: musb: Make busctl_offset an io-op rather then a define
2015-05-26 10:46:54 -05:00
musb_regs.h
usb: musb: Make busctl_offset an io-op rather then a define
2015-05-26 10:46:54 -05:00
musb_virthub.c
usb: musb: host: rely on port_mode to call musb_start()
2015-07-06 12:34:07 -05:00
musbhsdma.c
usb: musb: Set up function pointers for DMA
2015-05-07 13:35:51 -05:00
musbhsdma.h
omap2430.c
usb: musb: omap2430: Fix regression caused by driver core change
2015-10-28 10:16:04 -07:00
omap2430.h
usb: start using the control module driver
2013-01-25 12:27:24 +02:00
sunxi.c
musb: sunxi: Make sunxi musb glue work without MUSB_PIO_ONLY
2015-10-09 16:35:00 -05:00
tusb6010_omap.c
usb: musb: Set up function pointers for DMA
2015-05-07 13:35:51 -05:00
tusb6010.c
usb: musb: Set up function pointers for DMA
2015-05-07 13:35:51 -05:00
tusb6010.h
usb: musb: Fix up DMA related macros
2015-05-07 13:35:46 -05:00
ux500_dma.c
usb: musb: Set up function pointers for DMA
2015-05-07 13:35:51 -05:00
ux500.c
usb: musb: ux500: Fix module autoload for OF platform driver
2015-09-14 10:14:54 -05:00