linux/drivers/scsi
Linus Torvalds b0f85fa11a Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:

Changes of note:

 1) Allow to schedule ICMP packets in IPVS, from Alex Gartrell.

 2) Provide FIB table ID in ipv4 route dumps just as ipv6 does, from
    David Ahern.

 3) Allow the user to ask for the statistics to be filtered out of
    ipv4/ipv6 address netlink dumps.  From Sowmini Varadhan.

 4) More work to pass the network namespace context around deep into
    various packet path APIs, starting with the netfilter hooks.  From
    Eric W Biederman.

 5) Add layer 2 TX/RX checksum offloading to qeth driver, from Thomas
    Richter.

 6) Use usec resolution for SYN/ACK RTTs in TCP, from Yuchung Cheng.

 7) Support Very High Throughput in wireless MESH code, from Bob
    Copeland.

 8) Allow setting the ageing_time in switchdev/rocker.  From Scott
    Feldman.

 9) Properly autoload L2TP type modules, from Stephen Hemminger.

10) Fix and enable offload features by default in 8139cp driver, from
    David Woodhouse.

11) Support both ipv4 and ipv6 sockets in a single vxlan device, from
    Jiri Benc.

12) Fix CWND limiting of thin streams in TCP, from Bendik Rønning
    Opstad.

13) Fix IPSEC flowcache overflows on large systems, from Steffen
    Klassert.

14) Convert bridging to track VLANs using rhashtable entries rather than
    a bitmap.  From Nikolay Aleksandrov.

15) Make TCP listener handling completely lockless, this is a major
    accomplishment.  Incoming request sockets now live in the
    established hash table just like any other socket too.

    From Eric Dumazet.

15) Provide more bridging attributes to netlink, from Nikolay
    Aleksandrov.

16) Use hash based algorithm for ipv4 multipath routing, this was very
    long overdue.  From Peter Nørlund.

17) Several y2038 cures, mostly avoiding timespec.  From Arnd Bergmann.

18) Allow non-root execution of EBPF programs, from Alexei Starovoitov.

19) Support SO_INCOMING_CPU as setsockopt, from Eric Dumazet.  This
    influences the port binding selection logic used by SO_REUSEPORT.

20) Add ipv6 support to VRF, from David Ahern.

21) Add support for Mellanox Spectrum switch ASIC, from Jiri Pirko.

22) Add rtl8xxxu Realtek wireless driver, from Jes Sorensen.

23) Implement RACK loss recovery in TCP, from Yuchung Cheng.

24) Support multipath routes in MPLS, from Roopa Prabhu.

25) Fix POLLOUT notification for listening sockets in AF_UNIX, from Eric
    Dumazet.

26) Add new QED Qlogic river, from Yuval Mintz, Manish Chopra, and
    Sudarsana Kalluru.

27) Don't fetch timestamps on AF_UNIX sockets, from Hannes Frederic
    Sowa.

28) Support ipv6 geneve tunnels, from John W Linville.

29) Add flood control support to switchdev layer, from Ido Schimmel.

30) Fix CHECKSUM_PARTIAL handling of potentially fragmented frames, from
    Hannes Frederic Sowa.

31) Support persistent maps and progs in bpf, from Daniel Borkmann.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1790 commits)
  sh_eth: use DMA barriers
  switchdev: respect SKIP_EOPNOTSUPP flag in case there is no recursion
  net: sched: kill dead code in sch_choke.c
  irda: Delete an unnecessary check before the function call "irlmp_unregister_service"
  net: dsa: mv88e6xxx: include DSA ports in VLANs
  net: dsa: mv88e6xxx: disable SA learning for DSA and CPU ports
  net/core: fix for_each_netdev_feature
  vlan: Invoke driver vlan hooks only if device is present
  arcnet/com20020: add LEDS_CLASS dependency
  bpf, verifier: annotate verbose printer with __printf
  dp83640: Only wait for timestamps for packets with timestamping enabled.
  ptp: Change ptp_class to a proper bitmask
  dp83640: Prune rx timestamp list before reading from it
  dp83640: Delay scheduled work.
  dp83640: Include hash in timestamp/packet matching
  ipv6: fix tunnel error handling
  net/mlx5e: Fix LSO vlan insertion
  net/mlx5e: Re-eanble client vlan TX acceleration
  net/mlx5e: Return error in case mlx5e_set_features() fails
  net/mlx5e: Don't allow more than max supported channels
  ...
2015-11-04 09:41:05 -08:00
..
aacraid aacraid: aac_src_intr_message() can be static 2015-05-25 08:46:25 -07:00
aic7xxx aic7xxx: Fix typo in error message 2015-08-07 14:36:05 +02:00
aic94xx SCSI misc on 20150911 2015-09-11 18:15:18 -07:00
arcmsr libnvdimm for 4.3: 2015-09-08 14:35:59 -07:00
arm scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
be2iscsi be2iscsi : Bump the driver version 2015-05-25 08:57:53 -07:00
bfa bfa: Fix incorrect de-reference of pointer 2015-09-06 11:39:53 -07:00
bnx2fc bnx2fc: Read npiv table from nvram and create vports. 2015-08-06 21:54:13 -07:00
bnx2i bnx2i: Fix call trace while device reset 2015-06-02 17:15:24 -07:00
csiostor csiostor: fix an error code in csio_hw_init() 2015-05-25 08:46:26 -07:00
cxgbi cxgb4i: Increased the value of MAX_IMM_TX_PKT_LEN from 128 to 256 bytes 2015-10-14 18:40:32 -07:00
cxlflash cxlflash: Remove unused variable from queuecommand 2015-08-26 18:08:47 -07:00
device_handler scsi_dh: kill struct scsi_dh_data 2015-08-28 13:14:57 -07:00
dpt
esas2r SCSI misc on 20150209 2015-02-11 10:28:45 -08:00
fcoe SCSI misc on 20150911 2015-09-11 18:15:18 -07:00
fnic fnic: Use the local variable instead of I/O flag to acquire io_req_lock in fnic_queuecommand() to avoid deadloack 2015-08-18 08:11:23 -07:00
ibmvscsi IB/srp: Add 64-bit LUN support 2015-05-18 13:35:56 -04:00
isci scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
libfc SCSI misc on 20150901 2015-09-02 12:22:54 -07:00
libsas Merge branch 'for-4.0-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata 2015-03-24 17:08:29 -07:00
lpfc lpfc: Fix possible use-after-free and double free in lpfc_mbx_cmpl_rdp_page_a2() 2015-09-06 11:51:39 -07:00
megaraid megaraid_sas: fix whitespace errors 2015-08-26 07:36:51 -07:00
mpt2sas mpt2sas: setpci reset kernel oops fix 2015-09-06 11:57:25 -07:00
mpt3sas mpt3sas : Bump mpt3sas driver version to 9.100.00.00 2015-08-27 11:08:31 -07:00
mvsas mvsas: Fix NULL pointer dereference in mvs_slot_task_free 2015-10-27 11:21:07 +09:00
osd Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial 2015-04-14 09:50:27 -07:00
pcmcia scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
pm8001 pm80xx: Don't override ts->stat on IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY 2015-09-06 11:53:31 -07:00
qla2xxx Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending 2015-09-11 19:00:42 -07:00
qla4xxx Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next 2015-06-24 16:49:49 -07:00
snic snic: driver for Cisco SCSI HBA 2015-06-19 16:57:51 -07:00
sym53c8xx_2 scsi: drop reason argument from ->change_queue_depth 2014-11-24 14:45:27 +01:00
ufs SCSI misc on 20150622 2015-06-23 15:55:44 -07:00
.gitignore
3w-9xxx.c 3w-9xxx: don't unmap bounce buffered commands 2015-10-07 10:24:48 -07:00
3w-9xxx.h 3w-9xxx: fix command completion race 2015-04-27 10:10:19 -07:00
3w-sas.c 3w-sas: fix command completion race 2015-04-27 10:04:39 -07:00
3w-sas.h 3w-sas: fix command completion race 2015-04-27 10:04:39 -07:00
3w-xxxx.c 3w-xxxx: fix command completion race 2015-04-27 10:05:55 -07:00
3w-xxxx.h 3w-xxxx: fix command completion race 2015-04-27 10:05:55 -07:00
53c700_d.h_shipped
53c700.c [SCSI] Fix printk typos in drivers/scsi 2015-08-07 14:28:45 +02:00
53c700.h
53c700.scr
a100u2w.c scsi: a100u2w: trivial typo in printk 2015-08-07 15:03:42 +02:00
a100u2w.h
a2091.c zorro: ZTWO_VADDR() should return "void __iomem *" 2013-11-26 11:09:07 +01:00
a2091.h
a3000.c scsi: drop owner assignment from platform_drivers 2014-10-20 16:21:33 +02:00
a3000.h
a4000t.c scsi: drop owner assignment from platform_drivers 2014-10-20 16:21:33 +02:00
advansys.c advansys: fix compilation errors and warnings when CONFIG_PCI is not set 2015-06-13 08:42:36 -07:00
aha152x.c scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
aha152x.h
aha1542.c scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
aha1542.h aha1542: fix include guard and remove useless changelog 2015-04-09 18:08:31 -07:00
aha1740.c scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
aha1740.h scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
am53c974.c am53c974: Fix crash during modprobe 2015-04-17 10:13:56 -07:00
atari_NCR5380.c ncr5380: Harmonize jiffies conversion with msecs_to_jiffies 2015-03-09 10:45:26 -04:00
atari_scsi.c ncr5380: Drop owner assignment from platform_drivers 2015-03-09 07:18:14 -04:00
atp870u.c scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
atp870u.h scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
BusLogic.c scsi: replace seq_printf with seq_puts 2015-02-02 09:57:45 -08:00
BusLogic.h [SCSI] BusLogic: Port driver to 64-bit. 2013-06-26 18:32:47 -07:00
bvme6000_scsi.c scsi: drop owner assignment from platform_drivers 2014-10-20 16:21:33 +02:00
ch.c Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial 2015-04-14 09:50:27 -07:00
constants.c scsi: Conditionally compile in constants.c 2015-01-09 15:44:31 +01:00
dc395x.c scsi: print single-character strings with seq_putc 2015-02-02 09:57:46 -08:00
dc395x.h
dmx3191d.c dmx3191d: Use NO_IRQ 2014-11-20 09:11:11 +01:00
dpt_i2o.c x86/vm86: Clean up vm86.h includes 2015-07-31 13:31:10 +02:00
dpti.h scsi: use 64-bit LUNs 2014-07-17 22:07:37 +02:00
dtc.c ncr5380: Drop legacy scsi.h include 2014-11-20 09:11:10 +01:00
dtc.h ncr5380: Remove *_RELEASE macros 2014-11-20 09:11:10 +01:00
eata_generic.h
eata_pio.c scsi: replace seq_printf with seq_puts 2015-02-02 09:57:45 -08:00
eata_pio.h
eata.c scsi: drop reason argument from ->change_queue_depth 2014-11-24 14:45:27 +01:00
esp_scsi.c esp_scsi: remove check for ESP_MAX_TAGS 2015-01-09 15:44:23 +01:00
esp_scsi.h esp_scsi: correctly detect am53c974 2014-11-24 16:13:16 +01:00
fdomain.c scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
fdomain.h
FlashPoint.c [SCSI] BusLogic: Port driver to 64-bit. 2013-06-26 18:32:47 -07:00
g_NCR5380_mmio.c
g_NCR5380.c ncr5380: Harmonize jiffies conversion with msecs_to_jiffies 2015-03-09 10:45:26 -04:00
g_NCR5380.h ncr5380: Remove *_RELEASE macros 2014-11-20 09:11:10 +01:00
gdth_ioctl.h
gdth_proc.c scsi: replace seq_printf with seq_puts 2015-02-02 09:57:45 -08:00
gdth_proc.h
gdth.c scsi: rename SERVICE_ACTION_IN to SERVICE_ACTION_IN_16 2014-11-24 20:01:40 +01:00
gdth.h
gvp11.c zorro: ZTWO_VADDR() should return "void __iomem *" 2013-11-26 11:09:07 +01:00
gvp11.h
hosts.c scsi: remove ordered_tag host template field 2014-11-12 11:19:41 +01:00
hpsa_cmd.h hpsa: add in new offline mode 2015-08-26 16:28:48 -07:00
hpsa.c hpsa: fix rmmod issues 2015-08-26 16:29:49 -07:00
hpsa.h Change how controllers in mixed mode are handled. 2015-08-26 16:28:15 -07:00
hptiop.c hptiop: Support HighPoint RR36xx HBAs and Support SAS tape and SAS media changer 2015-08-12 13:14:57 -07:00
hptiop.h hptiop: Support HighPoint RR36xx HBAs and Support SAS tape and SAS media changer 2015-08-12 13:14:57 -07:00
imm.c scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
imm.h
in2000.c scsi: print single-character strings with seq_putc 2015-02-02 09:57:46 -08:00
in2000.h
initio.c scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
initio.h
ipr.c ipr: Enable SIS pipe commands for SIS-32 devices. 2015-08-28 13:14:53 -07:00
ipr.h ipr: Driver version 2.6.2 2015-07-30 12:41:47 -07:00
ips.c ips: remove pointless #warning 2015-06-02 17:24:54 -07:00
ips.h
iscsi_boot_sysfs.c [SCSI] iscsi_boot_sysfs: Fix a memory leak in iscsi_boot_destroy_kset() 2014-03-15 10:19:19 -07:00
iscsi_tcp.c scsi: drop reason argument from ->change_queue_depth 2014-11-24 14:45:27 +01:00
iscsi_tcp.h net: Fix use after free by removing length arg from sk_data_ready callbacks. 2014-04-11 16:15:36 -04:00
jazz_esp.c scsi: drop owner assignment from platform_drivers 2014-10-20 16:21:33 +02:00
Kconfig cxlflash: Base support for IBM CXL Flash Adapter 2015-07-30 21:02:01 -07:00
lasi700.c
libiscsi_tcp.c [SCSI] libiscsi: Reduce locking contention in fast path 2014-03-15 10:19:18 -07:00
libiscsi.c libiscsi: Fix iscsi_check_transport_timeouts possible infinite loop 2015-09-17 07:25:02 -07:00
mac53c94.c scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
mac53c94.h
mac_esp.c scsi: drop owner assignment from platform_drivers 2014-10-20 16:21:33 +02:00
mac_scsi.c ncr5380: Drop owner assignment from platform_drivers 2015-03-09 07:18:14 -04:00
Makefile scsi_dh: integrate into the core SCSI code 2015-08-28 13:14:56 -07:00
megaraid.c megaraid : use dev_printk when possible 2015-08-26 07:23:04 -07:00
megaraid.h [SCSI] megaraid: simplify internal command handling 2014-03-27 08:26:31 -07:00
mesh.c powerpc: Move Power Macintosh drivers to generic byteswappers 2015-03-23 14:29:40 +11:00
mesh.h
mvme16x_scsi.c scsi: drop owner assignment from platform_drivers 2014-10-20 16:21:33 +02:00
mvme147.c
mvme147.h
mvumi.c PCI: Remove DEFINE_PCI_DEVICE_TABLE macro use 2014-08-12 12:15:14 -06:00
mvumi.h
ncr53c8xx.c scsi: drop reason argument from ->change_queue_depth 2014-11-24 14:45:27 +01:00
ncr53c8xx.h scsi: Remove CONFIG_SCSI_MULTI_LUN 2014-07-17 22:07:35 +02:00
NCR53c406a.c scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
NCR5380.c ncr5380: Harmonize jiffies conversion with msecs_to_jiffies 2015-03-09 10:45:26 -04:00
NCR5380.h atari_NCR5380: Move static co-routine variables to host data 2014-11-20 09:11:20 +01:00
NCR_D700.c
NCR_D700.h
NCR_Q720.c
NCR_Q720.h
nsp32_debug.c
nsp32_io.h
nsp32.c scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
nsp32.h
osst_detect.h
osst_options.h
osst.c scsi: remove scsi_driver owner field 2014-11-24 20:01:28 +01:00
osst.h
pas16.c ncr5380: Drop legacy scsi.h include 2014-11-20 09:11:10 +01:00
pas16.h ncr5380: Remove *_RELEASE macros 2014-11-20 09:11:10 +01:00
pmcraid.c Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next 2015-02-10 20:01:30 -08:00
pmcraid.h
ppa.c scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
ppa.h
ps3rom.c scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
qla1280.c scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
qla1280.h
qlogicfas408.c
qlogicfas408.h
qlogicfas.c scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
qlogicpti.c scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
qlogicpti.h
raid_class.c
script_asm.pl
scsi_common.c scsi: Protect against buffer possible overflow in scsi_set_sense_information 2015-07-23 22:53:05 -07:00
scsi_debug.c scsi_debug: resp_request: remove unused variable 2015-09-06 11:03:14 -07:00
scsi_devinfo.c SCSI: add 1024 max sectors black list flag 2015-04-27 09:38:06 -07:00
scsi_dh.c scsi_dh: don't try to load a device handler during async probing 2015-10-27 15:03:31 +09:00
scsi_error.c Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending 2015-09-11 19:00:42 -07:00
scsi_ioctl.c scsi: return EAGAIN when resetting a device under EH 2014-11-12 11:16:12 +01:00
scsi_lib_dma.c
scsi_lib.c blk-mq: fix racy updates of rq->errors 2015-10-01 10:10:55 +02:00
scsi_logging.c scsi_logging: return void for dev_printk() functions 2015-02-04 08:00:24 -08:00
scsi_logging.h scsi: simplify scsi_log_(send|completion) 2014-11-12 11:16:05 +01:00
scsi_module.c
scsi_netlink.c net: Use netlink_ns_capable to verify the permisions of netlink messages 2014-04-24 13:44:54 -04:00
scsi_pm.c SCSI: Fix NULL pointer dereference in runtime PM 2015-08-18 08:14:14 -07:00
scsi_priv.h scsi_dh: fix use-after-free when removing scsi device 2015-10-27 11:22:37 +09:00
scsi_proc.c scsi: print single-character strings with seq_putc 2015-02-02 09:57:46 -08:00
scsi_sas_internal.h
scsi_scan.c Move code that is used both by initiator and target drivers 2015-06-01 07:32:43 -07:00
scsi_sysctl.c scsi: convert use of typedef ctl_table to struct ctl_table 2014-06-06 16:08:16 -07:00
scsi_sysfs.c scsi_dh: fix use-after-free when removing scsi device 2015-10-27 11:22:37 +09:00
scsi_trace.c scsi: print single-character strings with seq_putc 2015-02-02 09:57:46 -08:00
scsi_transport_api.h
scsi_transport_fc.c scsi_transport_fc: Add support for 25Gbit speed 2015-04-10 07:40:32 -07:00
scsi_transport_iscsi.c SCSI misc on 20150901 2015-09-02 12:22:54 -07:00
scsi_transport_sas.c scsi_transport_sas: Remove check for SAS expander when querying bay/enclosure IDs. 2015-09-06 11:13:41 -07:00
scsi_transport_spi.c [SCSI] Fix printk typos in drivers/scsi 2015-08-07 14:28:45 +02:00
scsi_transport_srp.c IB/srp: Avoid using uninitialized variable 2015-07-14 13:20:09 -04:00
scsi_typedefs.h
scsi.c Move code that is used both by initiator and target drivers 2015-06-01 07:32:43 -07:00
scsi.h
scsicam.c scsi: PC partition tables are little endian 2014-11-12 11:15:54 +01:00
sd_dif.c sd: Fix missing ATO tag check 2015-04-16 10:37:12 -07:00
sd.c Merge branch 'for-4.3/core' of git://git.kernel.dk/linux-block 2015-09-02 13:10:25 -07:00
sd.h scsi: introduce sdev_prefix_printk() 2014-11-12 11:15:57 +01:00
ses.c ses: Add power_status to SES device slot 2015-01-09 15:44:19 +01:00
sg.c sg_start_req(): use import_iovec() 2015-04-11 22:27:14 -04:00
sgiwd93.c scsi: drop owner assignment from platform_drivers 2014-10-20 16:21:33 +02:00
sim710.c
sni_53c710.c scsi: drop owner assignment from platform_drivers 2014-10-20 16:21:33 +02:00
sr_ioctl.c sr: reduce debug noise in sr_do_ioctl 2015-01-20 19:43:24 +01:00
sr_vendor.c scsi: Implement sr_printk() 2014-07-17 22:07:39 +02:00
sr.c scsi: remove scsi_driver owner field 2014-11-24 20:01:28 +01:00
sr.h scsi: introduce sdev_prefix_printk() 2014-11-12 11:15:57 +01:00
st_options.h
st.c st: Destroy st_index_idr on module exit 2015-08-26 07:45:25 -07:00
st.h st: implement tape statistics 2015-06-02 08:03:25 -07:00
stex.c scsi: don't force tagged_supported in drivers 2014-11-12 11:19:44 +01:00
storvsc_drv.c storvsc: Set the error code correctly in failure conditions 2015-08-26 22:41:36 -07:00
sun3_scsi_vme.c scsi/NCR5380: merge sun3_scsi_vme.c into sun3_scsi.c 2014-05-28 12:16:28 +02:00
sun3_scsi.c ncr5380: Drop owner assignment from platform_drivers 2015-03-09 07:18:14 -04:00
sun3_scsi.h sun3_scsi: Move macro definitions 2014-11-20 09:11:15 +01:00
sun3x_esp.c arch, drivers: don't include <asm/io.h> directly, use <linux/io.h> instead 2015-08-10 23:07:05 -04:00
sun_esp.c scsi: drop owner assignment from platform_drivers 2014-10-20 16:21:33 +02:00
sym53c416.c scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
sym53c416.h
t128.c ncr5380: Drop legacy scsi.h include 2014-11-20 09:11:10 +01:00
t128.h ncr5380: Remove *_RELEASE macros 2014-11-20 09:11:10 +01:00
u14-34f.c scsi: drop reason argument from ->change_queue_depth 2014-11-24 14:45:27 +01:00
ultrastor.c
ultrastor.h
virtio_scsi.c virtio/vhost: fixes for 4.2 2015-07-23 13:07:04 -07:00
vmw_pvscsi.c vmw_pscsi: simplify ->change_queue_depth 2014-11-24 14:45:28 +01:00
vmw_pvscsi.h PCI: Move PCI_VENDOR_ID_VMWARE to pci_ids.h 2014-09-24 11:52:09 -06:00
wd33c93.c scsi: print single-character strings with seq_putc 2015-02-02 09:57:46 -08:00
wd33c93.h
wd719x.c [SCSI] Fix printk typos in drivers/scsi 2015-08-07 14:28:45 +02:00
wd719x.h scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
wd7000.c scsi: replace seq_printf with seq_puts 2015-02-02 09:57:45 -08:00
xen-scsifront.c xen: Use correctly the Xen memory terminologies 2015-09-08 18:03:49 +01:00
zalon.c
zorro7xx.c zorro: ZTWO_VADDR() should return "void __iomem *" 2013-11-26 11:09:07 +01:00