linux/drivers/net/phy/icplus.c
Michael Barkowski 0cefeebaf3 phylib: add the ICPlus IP175C PHY driver
The ICPlus IP175C sports a 100Mbit/s 4-port switch in addition
to a dedicated 100Mbit/s WAN port.

Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-08 22:16:38 -04:00

135 lines
3.0 KiB
C

/*
* Driver for ICPlus PHYs
*
* Copyright (c) 2007 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/unistd.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <linux/spinlock.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/mii.h>
#include <linux/ethtool.h>
#include <linux/phy.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/uaccess.h>
MODULE_DESCRIPTION("ICPlus IP175C PHY driver");
MODULE_AUTHOR("Michael Barkowski");
MODULE_LICENSE("GPL");
static int ip175c_config_init(struct phy_device *phydev)
{
int err, i;
static int full_reset_performed = 0;
if (full_reset_performed == 0) {
/* master reset */
err = phydev->bus->write(phydev->bus, 30, 0, 0x175c);
if (err < 0)
return err;
/* ensure no bus delays overlap reset period */
err = phydev->bus->read(phydev->bus, 30, 0);
/* data sheet specifies reset period is 2 msec */
mdelay(2);
/* enable IP175C mode */
err = phydev->bus->write(phydev->bus, 29, 31, 0x175c);
if (err < 0)
return err;
/* Set MII0 speed and duplex (in PHY mode) */
err = phydev->bus->write(phydev->bus, 29, 22, 0x420);
if (err < 0)
return err;
/* reset switch ports */
for (i = 0; i < 5; i++) {
err = phydev->bus->write(phydev->bus, i,
MII_BMCR, BMCR_RESET);
if (err < 0)
return err;
}
for (i = 0; i < 5; i++)
err = phydev->bus->read(phydev->bus, i, MII_BMCR);
mdelay(2);
full_reset_performed = 1;
}
if (phydev->addr != 4) {
phydev->state = PHY_RUNNING;
phydev->speed = SPEED_100;
phydev->duplex = DUPLEX_FULL;
phydev->link = 1;
netif_carrier_on(phydev->attached_dev);
}
return 0;
}
static int ip175c_read_status(struct phy_device *phydev)
{
if (phydev->addr == 4) /* WAN port */
genphy_read_status(phydev);
else
/* Don't need to read status for switch ports */
phydev->irq = PHY_IGNORE_INTERRUPT;
return 0;
}
static int ip175c_config_aneg(struct phy_device *phydev)
{
if (phydev->addr == 4) /* WAN port */
genphy_config_aneg(phydev);
return 0;
}
static struct phy_driver ip175c_driver = {
.phy_id = 0x02430d80,
.name = "ICPlus IP175C",
.phy_id_mask = 0x0ffffff0,
.features = PHY_BASIC_FEATURES,
.config_init = &ip175c_config_init,
.config_aneg = &ip175c_config_aneg,
.read_status = &ip175c_read_status,
.driver = { .owner = THIS_MODULE,},
};
static int __init ip175c_init(void)
{
return phy_driver_register(&ip175c_driver);
}
static void __exit ip175c_exit(void)
{
phy_driver_unregister(&ip175c_driver);
}
module_init(ip175c_init);
module_exit(ip175c_exit);