mirror of
https://github.com/torvalds/linux.git
synced 2024-12-27 05:11:48 +00:00
bcec1221c9
Here are fixes for omaps to deal with few regressions, and to fix more boot time errors and warnings: - The recent ti-sysc interconnect target module driver changes had incorrect clock bits for both clocks and dts that cause warnings - For omap3-gta04, gpio changes caused the LCD to break a while back, and after discussing things the right fix is to set spi-cs-high - Recent omapdrm changes to use generic panels caused tfp410 to be disabled as we now must enable the generic support for it in defconfig - Recent omapdrm and backlight changes also finally made droid4 LCD to work, so let's enable it in the defconfig it can be used out of the box. This is not strictly a fix, but we still also have the older CONFIG_MFD_TI_LMU options available so this cuts down the confusion for trying to guess which display and which backlight is needed - Recent ti-sysc interconnect target module changes need the gpio module disabled on some boards, but this now needs to happen at the module level, not at the gpio driver level - Recent changes to probe system timers with ti-sysc caused warnings about mismatch in syconfig registers, so let's configure the option for RESET_STATUS as available in the TRMs - Recent changes to probe LCDC with ti-sysc caused warnings about mismatch in sysconfig registers, so let's configure the missing idlemodes for both platform data and dts as documented in TRMs - Since we moved mach-omap2 to probe with device tree, we've been getting voltage controller warnings. Turns out this code is no longer needed, so let's just remove omap2_set_init_voltage() to get rid of the pointless warnings - Configure am4372 dispc memory bandwidth to avoid underflow errors -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAl2U6fcRHHRvbnlAYXRv bWlkZS5jb20ACgkQG9Q+yVyrpXMu5RAAi9bqFTwKU3YiA4o0yDufGtx63fMziCD4 pMct5DMqyIfkCbU6KIp/pC3g3x35zl7WjoAbyB9Q8o33g/9mnQUSSTkB1TID/fZ0 +d7epXsGPRWymP2B13xOH/yRJv8dDeVWVHLBJdatuaAJ0mygpf4a4ChkXYKp+nhl oShxeRiOYYCrhowklmjvzV0atz17QSNc42GvAUpL3aicU9XmeYn7JLcxZ+3dBXuz 5IRbM/kt66i0owT6Oymf2lvf+UXELLXL/bXINPbPyYrXw94WuIk1z3i3gtQLsRk+ CyoYczBsgSWZRoFJB03324HY+KhGNHbC6kjfqoWk5UrbbX13L1+tSnKSlFRcZddx 64HPZISsgPOlx+i4TlTw/7YMq6FbLB8Z9gp+J1hxycynjYrfVQNCJADMlQDqA1DS gncdaz0O1RVcQULndFu7EYyLvybUjFmr0Q1wrW7mOFbIQn7KVTNYJ9GUJjWwmYcI N9yw6H7FjNad0TA+5prXKvQj+iP6budedW9Ke3mvyhkePMKwvORX5I6aVKjL0vKo gjUKuZC2x75GxgiUwYIJwDOEQGkBySFtf7RGFBjJ7l73/r4kDH6X/kG5AQDB0l3e sTSgMTM8KbkNWdQsvATSEN0Tf4Z7UsuhAhKLihNmkt7YXaYXEtBu0xoKPR8y6Xbd ZkiGMxkpLUY= =SkMF -----END PGP SIGNATURE----- Merge tag 'omap-for-v5.4/fixes-rc1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Fixes for omaps for v5.4-rc cycle Here are fixes for omaps to deal with few regressions, and to fix more boot time errors and warnings: - The recent ti-sysc interconnect target module driver changes had incorrect clock bits for both clocks and dts that cause warnings - For omap3-gta04, gpio changes caused the LCD to break a while back, and after discussing things the right fix is to set spi-cs-high - Recent omapdrm changes to use generic panels caused tfp410 to be disabled as we now must enable the generic support for it in defconfig - Recent omapdrm and backlight changes also finally made droid4 LCD to work, so let's enable it in the defconfig it can be used out of the box. This is not strictly a fix, but we still also have the older CONFIG_MFD_TI_LMU options available so this cuts down the confusion for trying to guess which display and which backlight is needed - Recent ti-sysc interconnect target module changes need the gpio module disabled on some boards, but this now needs to happen at the module level, not at the gpio driver level - Recent changes to probe system timers with ti-sysc caused warnings about mismatch in syconfig registers, so let's configure the option for RESET_STATUS as available in the TRMs - Recent changes to probe LCDC with ti-sysc caused warnings about mismatch in sysconfig registers, so let's configure the missing idlemodes for both platform data and dts as documented in TRMs - Since we moved mach-omap2 to probe with device tree, we've been getting voltage controller warnings. Turns out this code is no longer needed, so let's just remove omap2_set_init_voltage() to get rid of the pointless warnings - Configure am4372 dispc memory bandwidth to avoid underflow errors * tag 'omap-for-v5.4/fixes-rc1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am4372: Set memory bandwidth limit for DISPC ARM: OMAP2+: Fix warnings with broken omap2_set_init_voltage() ARM: OMAP2+: Add missing LCDC midlemode for am335x ARM: OMAP2+: Fix missing reset done flag for am3 and am43 ARM: dts: Fix gpio0 flags for am335x-icev2 ARM: omap2plus_defconfig: Enable more droid4 devices as loadable modules ARM: omap2plus_defconfig: Enable DRM_TI_TFP410 DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again ARM: dts: Fix wrong clocks for dra7 mcasp clk: ti: dra7: Fix mcasp8 clock bits Link: https://lore.kernel.org/r/pull-1570040410-308159@atomide.com Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|---|---|---|
| .. | ||
| actions | ||
| analogbits | ||
| at91 | ||
| axis | ||
| axs10x | ||
| bcm | ||
| berlin | ||
| davinci | ||
| h8300 | ||
| hisilicon | ||
| imgtec | ||
| imx | ||
| ingenic | ||
| keystone | ||
| loongson1 | ||
| mediatek | ||
| meson | ||
| microchip | ||
| mmp | ||
| mvebu | ||
| mxs | ||
| nxp | ||
| pistachio | ||
| pxa | ||
| qcom | ||
| renesas | ||
| rockchip | ||
| samsung | ||
| sifive | ||
| sirf | ||
| socfpga | ||
| spear | ||
| sprd | ||
| st | ||
| sunxi | ||
| sunxi-ng | ||
| tegra | ||
| ti | ||
| uniphier | ||
| ux500 | ||
| versatile | ||
| x86 | ||
| zte | ||
| zynq | ||
| zynqmp | ||
| clk-asm9260.c | ||
| clk-aspeed.c | ||
| clk-aspeed.h | ||
| clk-ast2600.c | ||
| clk-axi-clkgen.c | ||
| clk-axm5516.c | ||
| clk-bd718x7.c | ||
| clk-bulk.c | ||
| clk-cdce706.c | ||
| clk-cdce925.c | ||
| clk-clps711x.c | ||
| clk-composite.c | ||
| clk-conf.c | ||
| clk-cs2000-cp.c | ||
| clk-devres.c | ||
| clk-divider.c | ||
| clk-efm32gg.c | ||
| clk-fixed-factor.c | ||
| clk-fixed-mmio.c | ||
| clk-fixed-rate.c | ||
| clk-fractional-divider.c | ||
| clk-gate.c | ||
| clk-gemini.c | ||
| clk-gpio.c | ||
| clk-hi655x.c | ||
| clk-highbank.c | ||
| clk-hsdk-pll.c | ||
| clk-lochnagar.c | ||
| clk-max9485.c | ||
| clk-max77686.c | ||
| clk-milbeaut.c | ||
| clk-moxart.c | ||
| clk-multiplier.c | ||
| clk-mux.c | ||
| clk-nomadik.c | ||
| clk-npcm7xx.c | ||
| clk-nspire.c | ||
| clk-oxnas.c | ||
| clk-palmas.c | ||
| clk-pwm.c | ||
| clk-qoriq.c | ||
| clk-rk808.c | ||
| clk-s2mps11.c | ||
| clk-scmi.c | ||
| clk-scpi.c | ||
| clk-si514.c | ||
| clk-si544.c | ||
| clk-si570.c | ||
| clk-si5341.c | ||
| clk-si5351.c | ||
| clk-si5351.h | ||
| clk-stm32f4.c | ||
| clk-stm32h7.c | ||
| clk-stm32mp1.c | ||
| clk-tango4.c | ||
| clk-twl6040.c | ||
| clk-u300.c | ||
| clk-versaclock5.c | ||
| clk-vt8500.c | ||
| clk-wm831x.c | ||
| clk-xgene.c | ||
| clk.c | ||
| clk.h | ||
| clkdev.c | ||
| Kconfig | ||
| Makefile | ||