linux/arch/x86/kernel/head_64.S
Seiji Aguchi cf910e83ae x86, trace: Add irq vector tracepoints
[Purpose of this patch]

As Vaibhav explained in the thread below, tracepoints for irq vectors
are useful.

http://www.spinics.net/lists/mm-commits/msg85707.html

<snip>
The current interrupt traces from irq_handler_entry and irq_handler_exit
provide when an interrupt is handled.  They provide good data about when
the system has switched to kernel space and how it affects the currently
running processes.

There are some IRQ vectors which trigger the system into kernel space,
which are not handled in generic IRQ handlers.  Tracing such events gives
us the information about IRQ interaction with other system events.

The trace also tells where the system is spending its time.  We want to
know which cores are handling interrupts and how they are affecting other
processes in the system.  Also, the trace provides information about when
the cores are idle and which interrupts are changing that state.
<snip>

On the other hand, my usecase is tracing just local timer event and
getting a value of instruction pointer.

I suggested to add an argument local timer event to get instruction pointer before.
But there is another way to get it with external module like systemtap.
So, I don't need to add any argument to irq vector tracepoints now.

[Patch Description]

Vaibhav's patch shared a trace point ,irq_vector_entry/irq_vector_exit, in all events.
But there is an above use case to trace specific irq_vector rather than tracing all events.
In this case, we are concerned about overhead due to unwanted events.

So, add following tracepoints instead of introducing irq_vector_entry/exit.
so that we can enable them independently.
   - local_timer_vector
   - reschedule_vector
   - call_function_vector
   - call_function_single_vector
   - irq_work_entry_vector
   - error_apic_vector
   - thermal_apic_vector
   - threshold_apic_vector
   - spurious_apic_vector
   - x86_platform_ipi_vector

Also, introduce a logic switching IDT at enabling/disabling time so that a time penalty
makes a zero when tracepoints are disabled. Detailed explanations are as follows.
 - Create trace irq handlers with entering_irq()/exiting_irq().
 - Create a new IDT, trace_idt_table, at boot time by adding a logic to
   _set_gate(). It is just a copy of original idt table.
 - Register the new handlers for tracpoints to the new IDT by introducing
   macros to alloc_intr_gate() called at registering time of irq_vector handlers.
 - Add checking, whether irq vector tracing is on/off, into load_current_idt().
   This has to be done below debug checking for these reasons.
   - Switching to debug IDT may be kicked while tracing is enabled.
   - On the other hands, switching to trace IDT is kicked only when debugging
     is disabled.

In addition, the new IDT is created only when CONFIG_TRACING is enabled to avoid being
used for other purposes.

Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com>
Link: http://lkml.kernel.org/r/51C323ED.5050708@hds.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
2013-06-20 22:25:34 -07:00

533 lines
13 KiB
ArmAsm

/*
* linux/arch/x86_64/kernel/head.S -- start in 32bit and switch to 64bit
*
* Copyright (C) 2000 Andrea Arcangeli <andrea@suse.de> SuSE
* Copyright (C) 2000 Pavel Machek <pavel@suse.cz>
* Copyright (C) 2000 Karsten Keil <kkeil@suse.de>
* Copyright (C) 2001,2002 Andi Kleen <ak@suse.de>
* Copyright (C) 2005 Eric Biederman <ebiederm@xmission.com>
*/
#include <linux/linkage.h>
#include <linux/threads.h>
#include <linux/init.h>
#include <asm/segment.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/msr.h>
#include <asm/cache.h>
#include <asm/processor-flags.h>
#include <asm/percpu.h>
#include <asm/nops.h>
#ifdef CONFIG_PARAVIRT
#include <asm/asm-offsets.h>
#include <asm/paravirt.h>
#define GET_CR2_INTO(reg) GET_CR2_INTO_RAX ; movq %rax, reg
#else
#define GET_CR2_INTO(reg) movq %cr2, reg
#define INTERRUPT_RETURN iretq
#endif
/* we are not able to switch in one step to the final KERNEL ADDRESS SPACE
* because we need identity-mapped pages.
*
*/
#define pud_index(x) (((x) >> PUD_SHIFT) & (PTRS_PER_PUD-1))
L4_PAGE_OFFSET = pgd_index(__PAGE_OFFSET)
L3_PAGE_OFFSET = pud_index(__PAGE_OFFSET)
L4_START_KERNEL = pgd_index(__START_KERNEL_map)
L3_START_KERNEL = pud_index(__START_KERNEL_map)
.text
__HEAD
.code64
.globl startup_64
startup_64:
/*
* At this point the CPU runs in 64bit mode CS.L = 1 CS.D = 0,
* and someone has loaded an identity mapped page table
* for us. These identity mapped page tables map all of the
* kernel pages and possibly all of memory.
*
* %rsi holds a physical pointer to real_mode_data.
*
* We come here either directly from a 64bit bootloader, or from
* arch/x86_64/boot/compressed/head.S.
*
* We only come here initially at boot nothing else comes here.
*
* Since we may be loaded at an address different from what we were
* compiled to run at we first fixup the physical addresses in our page
* tables and then reload them.
*/
/*
* Compute the delta between the address I am compiled to run at and the
* address I am actually running at.
*/
leaq _text(%rip), %rbp
subq $_text - __START_KERNEL_map, %rbp
/* Is the address not 2M aligned? */
movq %rbp, %rax
andl $~PMD_PAGE_MASK, %eax
testl %eax, %eax
jnz bad_address
/*
* Is the address too large?
*/
leaq _text(%rip), %rax
shrq $MAX_PHYSMEM_BITS, %rax
jnz bad_address
/*
* Fixup the physical addresses in the page table
*/
addq %rbp, early_level4_pgt + (L4_START_KERNEL*8)(%rip)
addq %rbp, level3_kernel_pgt + (510*8)(%rip)
addq %rbp, level3_kernel_pgt + (511*8)(%rip)
addq %rbp, level2_fixmap_pgt + (506*8)(%rip)
/*
* Set up the identity mapping for the switchover. These
* entries should *NOT* have the global bit set! This also
* creates a bunch of nonsense entries but that is fine --
* it avoids problems around wraparound.
*/
leaq _text(%rip), %rdi
leaq early_level4_pgt(%rip), %rbx
movq %rdi, %rax
shrq $PGDIR_SHIFT, %rax
leaq (4096 + _KERNPG_TABLE)(%rbx), %rdx
movq %rdx, 0(%rbx,%rax,8)
movq %rdx, 8(%rbx,%rax,8)
addq $4096, %rdx
movq %rdi, %rax
shrq $PUD_SHIFT, %rax
andl $(PTRS_PER_PUD-1), %eax
movq %rdx, 4096(%rbx,%rax,8)
incl %eax
andl $(PTRS_PER_PUD-1), %eax
movq %rdx, 4096(%rbx,%rax,8)
addq $8192, %rbx
movq %rdi, %rax
shrq $PMD_SHIFT, %rdi
addq $(__PAGE_KERNEL_LARGE_EXEC & ~_PAGE_GLOBAL), %rax
leaq (_end - 1)(%rip), %rcx
shrq $PMD_SHIFT, %rcx
subq %rdi, %rcx
incl %ecx
1:
andq $(PTRS_PER_PMD - 1), %rdi
movq %rax, (%rbx,%rdi,8)
incq %rdi
addq $PMD_SIZE, %rax
decl %ecx
jnz 1b
/*
* Fixup the kernel text+data virtual addresses. Note that
* we might write invalid pmds, when the kernel is relocated
* cleanup_highmap() fixes this up along with the mappings
* beyond _end.
*/
leaq level2_kernel_pgt(%rip), %rdi
leaq 4096(%rdi), %r8
/* See if it is a valid page table entry */
1: testq $1, 0(%rdi)
jz 2f
addq %rbp, 0(%rdi)
/* Go to the next page */
2: addq $8, %rdi
cmp %r8, %rdi
jne 1b
/* Fixup phys_base */
addq %rbp, phys_base(%rip)
movq $(early_level4_pgt - __START_KERNEL_map), %rax
jmp 1f
ENTRY(secondary_startup_64)
/*
* At this point the CPU runs in 64bit mode CS.L = 1 CS.D = 0,
* and someone has loaded a mapped page table.
*
* %rsi holds a physical pointer to real_mode_data.
*
* We come here either from startup_64 (using physical addresses)
* or from trampoline.S (using virtual addresses).
*
* Using virtual addresses from trampoline.S removes the need
* to have any identity mapped pages in the kernel page table
* after the boot processor executes this code.
*/
movq $(init_level4_pgt - __START_KERNEL_map), %rax
1:
/* Enable PAE mode and PGE */
movl $(X86_CR4_PAE | X86_CR4_PGE), %ecx
movq %rcx, %cr4
/* Setup early boot stage 4 level pagetables. */
addq phys_base(%rip), %rax
movq %rax, %cr3
/* Ensure I am executing from virtual addresses */
movq $1f, %rax
jmp *%rax
1:
/* Check if nx is implemented */
movl $0x80000001, %eax
cpuid
movl %edx,%edi
/* Setup EFER (Extended Feature Enable Register) */
movl $MSR_EFER, %ecx
rdmsr
btsl $_EFER_SCE, %eax /* Enable System Call */
btl $20,%edi /* No Execute supported? */
jnc 1f
btsl $_EFER_NX, %eax
btsq $_PAGE_BIT_NX,early_pmd_flags(%rip)
1: wrmsr /* Make changes effective */
/* Setup cr0 */
#define CR0_STATE (X86_CR0_PE | X86_CR0_MP | X86_CR0_ET | \
X86_CR0_NE | X86_CR0_WP | X86_CR0_AM | \
X86_CR0_PG)
movl $CR0_STATE, %eax
/* Make changes effective */
movq %rax, %cr0
/* Setup a boot time stack */
movq stack_start(%rip), %rsp
/* zero EFLAGS after setting rsp */
pushq $0
popfq
/*
* We must switch to a new descriptor in kernel space for the GDT
* because soon the kernel won't have access anymore to the userspace
* addresses where we're currently running on. We have to do that here
* because in 32bit we couldn't load a 64bit linear address.
*/
lgdt early_gdt_descr(%rip)
/* set up data segments */
xorl %eax,%eax
movl %eax,%ds
movl %eax,%ss
movl %eax,%es
/*
* We don't really need to load %fs or %gs, but load them anyway
* to kill any stale realmode selectors. This allows execution
* under VT hardware.
*/
movl %eax,%fs
movl %eax,%gs
/* Set up %gs.
*
* The base of %gs always points to the bottom of the irqstack
* union. If the stack protector canary is enabled, it is
* located at %gs:40. Note that, on SMP, the boot cpu uses
* init data section till per cpu areas are set up.
*/
movl $MSR_GS_BASE,%ecx
movl initial_gs(%rip),%eax
movl initial_gs+4(%rip),%edx
wrmsr
/* rsi is pointer to real mode structure with interesting info.
pass it to C */
movq %rsi, %rdi
/* Finally jump to run C code and to be on real kernel address
* Since we are running on identity-mapped space we have to jump
* to the full 64bit address, this is only possible as indirect
* jump. In addition we need to ensure %cs is set so we make this
* a far return.
*
* Note: do not change to far jump indirect with 64bit offset.
*
* AMD does not support far jump indirect with 64bit offset.
* AMD64 Architecture Programmer's Manual, Volume 3: states only
* JMP FAR mem16:16 FF /5 Far jump indirect,
* with the target specified by a far pointer in memory.
* JMP FAR mem16:32 FF /5 Far jump indirect,
* with the target specified by a far pointer in memory.
*
* Intel64 does support 64bit offset.
* Software Developer Manual Vol 2: states:
* FF /5 JMP m16:16 Jump far, absolute indirect,
* address given in m16:16
* FF /5 JMP m16:32 Jump far, absolute indirect,
* address given in m16:32.
* REX.W + FF /5 JMP m16:64 Jump far, absolute indirect,
* address given in m16:64.
*/
movq initial_code(%rip),%rax
pushq $0 # fake return address to stop unwinder
pushq $__KERNEL_CS # set correct cs
pushq %rax # target address in negative space
lretq
#ifdef CONFIG_HOTPLUG_CPU
/*
* Boot CPU0 entry point. It's called from play_dead(). Everything has been set
* up already except stack. We just set up stack here. Then call
* start_secondary().
*/
ENTRY(start_cpu0)
movq stack_start(%rip),%rsp
movq initial_code(%rip),%rax
pushq $0 # fake return address to stop unwinder
pushq $__KERNEL_CS # set correct cs
pushq %rax # target address in negative space
lretq
ENDPROC(start_cpu0)
#endif
/* SMP bootup changes these two */
__REFDATA
.balign 8
GLOBAL(initial_code)
.quad x86_64_start_kernel
GLOBAL(initial_gs)
.quad INIT_PER_CPU_VAR(irq_stack_union)
GLOBAL(stack_start)
.quad init_thread_union+THREAD_SIZE-8
.word 0
__FINITDATA
bad_address:
jmp bad_address
__INIT
.globl early_idt_handlers
early_idt_handlers:
# 104(%rsp) %rflags
# 96(%rsp) %cs
# 88(%rsp) %rip
# 80(%rsp) error code
i = 0
.rept NUM_EXCEPTION_VECTORS
.if (EXCEPTION_ERRCODE_MASK >> i) & 1
ASM_NOP2
.else
pushq $0 # Dummy error code, to make stack frame uniform
.endif
pushq $i # 72(%rsp) Vector number
jmp early_idt_handler
i = i + 1
.endr
/* This is global to keep gas from relaxing the jumps */
ENTRY(early_idt_handler)
cld
cmpl $2,early_recursion_flag(%rip)
jz 1f
incl early_recursion_flag(%rip)
pushq %rax # 64(%rsp)
pushq %rcx # 56(%rsp)
pushq %rdx # 48(%rsp)
pushq %rsi # 40(%rsp)
pushq %rdi # 32(%rsp)
pushq %r8 # 24(%rsp)
pushq %r9 # 16(%rsp)
pushq %r10 # 8(%rsp)
pushq %r11 # 0(%rsp)
cmpl $__KERNEL_CS,96(%rsp)
jne 11f
cmpl $14,72(%rsp) # Page fault?
jnz 10f
GET_CR2_INTO(%rdi) # can clobber any volatile register if pv
call early_make_pgtable
andl %eax,%eax
jz 20f # All good
10:
leaq 88(%rsp),%rdi # Pointer to %rip
call early_fixup_exception
andl %eax,%eax
jnz 20f # Found an exception entry
11:
#ifdef CONFIG_EARLY_PRINTK
GET_CR2_INTO(%r9) # can clobber any volatile register if pv
movl 80(%rsp),%r8d # error code
movl 72(%rsp),%esi # vector number
movl 96(%rsp),%edx # %cs
movq 88(%rsp),%rcx # %rip
xorl %eax,%eax
leaq early_idt_msg(%rip),%rdi
call early_printk
cmpl $2,early_recursion_flag(%rip)
jz 1f
call dump_stack
#ifdef CONFIG_KALLSYMS
leaq early_idt_ripmsg(%rip),%rdi
movq 40(%rsp),%rsi # %rip again
call __print_symbol
#endif
#endif /* EARLY_PRINTK */
1: hlt
jmp 1b
20: # Exception table entry found or page table generated
popq %r11
popq %r10
popq %r9
popq %r8
popq %rdi
popq %rsi
popq %rdx
popq %rcx
popq %rax
addq $16,%rsp # drop vector number and error code
decl early_recursion_flag(%rip)
INTERRUPT_RETURN
ENDPROC(early_idt_handler)
__INITDATA
.balign 4
early_recursion_flag:
.long 0
#ifdef CONFIG_EARLY_PRINTK
early_idt_msg:
.asciz "PANIC: early exception %02lx rip %lx:%lx error %lx cr2 %lx\n"
early_idt_ripmsg:
.asciz "RIP %s\n"
#endif /* CONFIG_EARLY_PRINTK */
#define NEXT_PAGE(name) \
.balign PAGE_SIZE; \
GLOBAL(name)
/* Automate the creation of 1 to 1 mapping pmd entries */
#define PMDS(START, PERM, COUNT) \
i = 0 ; \
.rept (COUNT) ; \
.quad (START) + (i << PMD_SHIFT) + (PERM) ; \
i = i + 1 ; \
.endr
__INITDATA
NEXT_PAGE(early_level4_pgt)
.fill 511,8,0
.quad level3_kernel_pgt - __START_KERNEL_map + _PAGE_TABLE
NEXT_PAGE(early_dynamic_pgts)
.fill 512*EARLY_DYNAMIC_PAGE_TABLES,8,0
.data
#ifndef CONFIG_XEN
NEXT_PAGE(init_level4_pgt)
.fill 512,8,0
#else
NEXT_PAGE(init_level4_pgt)
.quad level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE
.org init_level4_pgt + L4_PAGE_OFFSET*8, 0
.quad level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE
.org init_level4_pgt + L4_START_KERNEL*8, 0
/* (2^48-(2*1024*1024*1024))/(2^39) = 511 */
.quad level3_kernel_pgt - __START_KERNEL_map + _PAGE_TABLE
NEXT_PAGE(level3_ident_pgt)
.quad level2_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE
.fill 511, 8, 0
NEXT_PAGE(level2_ident_pgt)
/* Since I easily can, map the first 1G.
* Don't set NX because code runs from these pages.
*/
PMDS(0, __PAGE_KERNEL_IDENT_LARGE_EXEC, PTRS_PER_PMD)
#endif
NEXT_PAGE(level3_kernel_pgt)
.fill L3_START_KERNEL,8,0
/* (2^48-(2*1024*1024*1024)-((2^39)*511))/(2^30) = 510 */
.quad level2_kernel_pgt - __START_KERNEL_map + _KERNPG_TABLE
.quad level2_fixmap_pgt - __START_KERNEL_map + _PAGE_TABLE
NEXT_PAGE(level2_kernel_pgt)
/*
* 512 MB kernel mapping. We spend a full page on this pagetable
* anyway.
*
* The kernel code+data+bss must not be bigger than that.
*
* (NOTE: at +512MB starts the module area, see MODULES_VADDR.
* If you want to increase this then increase MODULES_VADDR
* too.)
*/
PMDS(0, __PAGE_KERNEL_LARGE_EXEC,
KERNEL_IMAGE_SIZE/PMD_SIZE)
NEXT_PAGE(level2_fixmap_pgt)
.fill 506,8,0
.quad level1_fixmap_pgt - __START_KERNEL_map + _PAGE_TABLE
/* 8MB reserved for vsyscalls + a 2MB hole = 4 + 1 entries */
.fill 5,8,0
NEXT_PAGE(level1_fixmap_pgt)
.fill 512,8,0
#undef PMDS
.data
.align 16
.globl early_gdt_descr
early_gdt_descr:
.word GDT_ENTRIES*8-1
early_gdt_descr_base:
.quad INIT_PER_CPU_VAR(gdt_page)
ENTRY(phys_base)
/* This must match the first entry in level2_kernel_pgt */
.quad 0x0000000000000000
#include "../../x86/xen/xen-head.S"
.section .bss, "aw", @nobits
.align L1_CACHE_BYTES
ENTRY(idt_table)
.skip IDT_ENTRIES * 16
.align L1_CACHE_BYTES
ENTRY(debug_idt_table)
.skip IDT_ENTRIES * 16
#ifdef CONFIG_TRACING
.align L1_CACHE_BYTES
ENTRY(trace_idt_table)
.skip IDT_ENTRIES * 16
#endif
__PAGE_ALIGNED_BSS
NEXT_PAGE(empty_zero_page)
.skip PAGE_SIZE