mirror of
https://github.com/torvalds/linux.git
synced 2024-11-15 08:31:55 +00:00
cd99758ba3
The modern idiom is to use irq_domain to allocate interrupts. This is useful partly to allow further infrastructure to be based on the domains and partly because it makes it much easier to allocate virtual interrupts to devices as we don't need to allocate a contiguous range of interrupt numbers. Convert the wm831x driver over to this infrastructure, using a legacy IRQ mapping if an irq_base is specified in platform data and otherwise using a linear mapping, always registering the interrupts even if they won't ever be used. Only boards which need to use the GPIOs as interrupts should need to use an irq_base. This means that we can't use the MFD irq_base management since the unless we're using an explicit irq_base from platform data we can't rely on a linear mapping of interrupts. Instead we need to map things via the irq_domain - provide a conveniencem function wm831x_irq() to save a small amount of typing when doing so. Looking at this I couldn't clearly see anything the MFD core could do to make this nicer. Since we're not supporting device tree yet there's no meaningful advantage if we don't do this conversion in one, the fact that the interrupt resources are used for repeated IP blocks makes accessor functions for the irq_domain more trouble to do than they're worth. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
264 lines
6.3 KiB
C
264 lines
6.3 KiB
C
/*
|
|
* wm831x-isink.c -- Current sink driver for the WM831x series
|
|
*
|
|
* Copyright 2009 Wolfson Microelectronics PLC.
|
|
*
|
|
* Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/init.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/err.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regulator/driver.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include <linux/mfd/wm831x/core.h>
|
|
#include <linux/mfd/wm831x/regulator.h>
|
|
#include <linux/mfd/wm831x/pdata.h>
|
|
|
|
#define WM831X_ISINK_MAX_NAME 7
|
|
|
|
struct wm831x_isink {
|
|
char name[WM831X_ISINK_MAX_NAME];
|
|
struct regulator_desc desc;
|
|
int reg;
|
|
struct wm831x *wm831x;
|
|
struct regulator_dev *regulator;
|
|
};
|
|
|
|
static int wm831x_isink_enable(struct regulator_dev *rdev)
|
|
{
|
|
struct wm831x_isink *isink = rdev_get_drvdata(rdev);
|
|
struct wm831x *wm831x = isink->wm831x;
|
|
int ret;
|
|
|
|
/* We have a two stage enable: first start the ISINK... */
|
|
ret = wm831x_set_bits(wm831x, isink->reg, WM831X_CS1_ENA,
|
|
WM831X_CS1_ENA);
|
|
if (ret != 0)
|
|
return ret;
|
|
|
|
/* ...then enable drive */
|
|
ret = wm831x_set_bits(wm831x, isink->reg, WM831X_CS1_DRIVE,
|
|
WM831X_CS1_DRIVE);
|
|
if (ret != 0)
|
|
wm831x_set_bits(wm831x, isink->reg, WM831X_CS1_ENA, 0);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
static int wm831x_isink_disable(struct regulator_dev *rdev)
|
|
{
|
|
struct wm831x_isink *isink = rdev_get_drvdata(rdev);
|
|
struct wm831x *wm831x = isink->wm831x;
|
|
int ret;
|
|
|
|
ret = wm831x_set_bits(wm831x, isink->reg, WM831X_CS1_DRIVE, 0);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = wm831x_set_bits(wm831x, isink->reg, WM831X_CS1_ENA, 0);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
static int wm831x_isink_is_enabled(struct regulator_dev *rdev)
|
|
{
|
|
struct wm831x_isink *isink = rdev_get_drvdata(rdev);
|
|
struct wm831x *wm831x = isink->wm831x;
|
|
int ret;
|
|
|
|
ret = wm831x_reg_read(wm831x, isink->reg);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if ((ret & (WM831X_CS1_ENA | WM831X_CS1_DRIVE)) ==
|
|
(WM831X_CS1_ENA | WM831X_CS1_DRIVE))
|
|
return 1;
|
|
else
|
|
return 0;
|
|
}
|
|
|
|
static int wm831x_isink_set_current(struct regulator_dev *rdev,
|
|
int min_uA, int max_uA)
|
|
{
|
|
struct wm831x_isink *isink = rdev_get_drvdata(rdev);
|
|
struct wm831x *wm831x = isink->wm831x;
|
|
int ret, i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(wm831x_isinkv_values); i++) {
|
|
int val = wm831x_isinkv_values[i];
|
|
if (min_uA <= val && val <= max_uA) {
|
|
ret = wm831x_set_bits(wm831x, isink->reg,
|
|
WM831X_CS1_ISEL_MASK, i);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int wm831x_isink_get_current(struct regulator_dev *rdev)
|
|
{
|
|
struct wm831x_isink *isink = rdev_get_drvdata(rdev);
|
|
struct wm831x *wm831x = isink->wm831x;
|
|
int ret;
|
|
|
|
ret = wm831x_reg_read(wm831x, isink->reg);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret &= WM831X_CS1_ISEL_MASK;
|
|
if (ret > WM831X_ISINK_MAX_ISEL)
|
|
ret = WM831X_ISINK_MAX_ISEL;
|
|
|
|
return wm831x_isinkv_values[ret];
|
|
}
|
|
|
|
static struct regulator_ops wm831x_isink_ops = {
|
|
.is_enabled = wm831x_isink_is_enabled,
|
|
.enable = wm831x_isink_enable,
|
|
.disable = wm831x_isink_disable,
|
|
.set_current_limit = wm831x_isink_set_current,
|
|
.get_current_limit = wm831x_isink_get_current,
|
|
};
|
|
|
|
static irqreturn_t wm831x_isink_irq(int irq, void *data)
|
|
{
|
|
struct wm831x_isink *isink = data;
|
|
|
|
regulator_notifier_call_chain(isink->regulator,
|
|
REGULATOR_EVENT_OVER_CURRENT,
|
|
NULL);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
|
|
static __devinit int wm831x_isink_probe(struct platform_device *pdev)
|
|
{
|
|
struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
|
|
struct wm831x_pdata *pdata = wm831x->dev->platform_data;
|
|
struct wm831x_isink *isink;
|
|
int id = pdev->id % ARRAY_SIZE(pdata->isink);
|
|
struct resource *res;
|
|
int ret, irq;
|
|
|
|
dev_dbg(&pdev->dev, "Probing ISINK%d\n", id + 1);
|
|
|
|
if (pdata == NULL || pdata->isink[id] == NULL)
|
|
return -ENODEV;
|
|
|
|
isink = devm_kzalloc(&pdev->dev, sizeof(struct wm831x_isink),
|
|
GFP_KERNEL);
|
|
if (isink == NULL) {
|
|
dev_err(&pdev->dev, "Unable to allocate private data\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
isink->wm831x = wm831x;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_IO, 0);
|
|
if (res == NULL) {
|
|
dev_err(&pdev->dev, "No I/O resource\n");
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
isink->reg = res->start;
|
|
|
|
/* For current parts this is correct; probably need to revisit
|
|
* in future.
|
|
*/
|
|
snprintf(isink->name, sizeof(isink->name), "ISINK%d", id + 1);
|
|
isink->desc.name = isink->name;
|
|
isink->desc.id = id;
|
|
isink->desc.ops = &wm831x_isink_ops;
|
|
isink->desc.type = REGULATOR_CURRENT;
|
|
isink->desc.owner = THIS_MODULE;
|
|
|
|
isink->regulator = regulator_register(&isink->desc, &pdev->dev,
|
|
pdata->isink[id], isink, NULL);
|
|
if (IS_ERR(isink->regulator)) {
|
|
ret = PTR_ERR(isink->regulator);
|
|
dev_err(wm831x->dev, "Failed to register ISINK%d: %d\n",
|
|
id + 1, ret);
|
|
goto err;
|
|
}
|
|
|
|
irq = wm831x_irq(wm831x, platform_get_irq(pdev, 0));
|
|
ret = request_threaded_irq(irq, NULL, wm831x_isink_irq,
|
|
IRQF_TRIGGER_RISING, isink->name, isink);
|
|
if (ret != 0) {
|
|
dev_err(&pdev->dev, "Failed to request ISINK IRQ %d: %d\n",
|
|
irq, ret);
|
|
goto err_regulator;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, isink);
|
|
|
|
return 0;
|
|
|
|
err_regulator:
|
|
regulator_unregister(isink->regulator);
|
|
err:
|
|
return ret;
|
|
}
|
|
|
|
static __devexit int wm831x_isink_remove(struct platform_device *pdev)
|
|
{
|
|
struct wm831x_isink *isink = platform_get_drvdata(pdev);
|
|
|
|
platform_set_drvdata(pdev, NULL);
|
|
|
|
free_irq(wm831x_irq(isink->wm831x, platform_get_irq(pdev, 0)), isink);
|
|
|
|
regulator_unregister(isink->regulator);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver wm831x_isink_driver = {
|
|
.probe = wm831x_isink_probe,
|
|
.remove = __devexit_p(wm831x_isink_remove),
|
|
.driver = {
|
|
.name = "wm831x-isink",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
};
|
|
|
|
static int __init wm831x_isink_init(void)
|
|
{
|
|
int ret;
|
|
ret = platform_driver_register(&wm831x_isink_driver);
|
|
if (ret != 0)
|
|
pr_err("Failed to register WM831x ISINK driver: %d\n", ret);
|
|
|
|
return ret;
|
|
}
|
|
subsys_initcall(wm831x_isink_init);
|
|
|
|
static void __exit wm831x_isink_exit(void)
|
|
{
|
|
platform_driver_unregister(&wm831x_isink_driver);
|
|
}
|
|
module_exit(wm831x_isink_exit);
|
|
|
|
/* Module information */
|
|
MODULE_AUTHOR("Mark Brown");
|
|
MODULE_DESCRIPTION("WM831x current sink driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:wm831x-isink");
|