Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-17 17:41:44 +00:00
Code Issues Packages Projects Releases Wiki Activity
ccf6c1f2e2
linux/drivers/scsi
History
Chandrakanth Patil ccf6c1f2e2 scsi: megaraid_sas: In probe context, retry IOC INIT once if firmware is in fault 
Issue: Under certain conditions, controller goes in FAULT state after IOC
INIT fired to firmware. Such Fault can be recovered through controller
reset.

Fix: In driver probe context, if firmware fault is observed post IOC INIT,
driver would do controller reset followed by retry logic for IOC INIT
command.

Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-27 00:07:35 -04:00
..
aacraid scsi: aacraid: Insure we don't access PCIe space during AER/EEH 2019-03-25 22:19:01 -04:00
aic7xxx scsi: aic7xxx: Spelling s/configuraion/configuration/ 2019-06-18 19:46:25 -04:00
aic94xx scsi: libsas: aic94xx: hisi_sas: mvsas: pm8001: Use dev_is_expander() 2019-06-20 15:37:02 -04:00
arcmsr scsi: arcmsr: Update driver version to v1.40.00.10-20190116 2019-01-22 21:38:21 -05:00
arm scsi: remove the use_clustering flag 2018-12-18 23:19:21 -05:00
be2iscsi SCSI misc on 20190507 2019-05-08 10:12:46 -07:00
bfa Wimplicit-fallthrough patches for 5.2-rc1 2019-05-07 12:48:10 -07:00
bnx2fc scsi: bnx2fc: fix bnx2fc_cmd refcount imbalance in send_srr 2019-06-26 22:43:02 -04:00
bnx2i drivers: Remove explicit invocations of mmiowb() 2019-04-08 12:01:02 +01:00
csiostor SCSI misc on 20190507 2019-05-08 10:12:46 -07:00
cxgbi scsi: cxgb4i: add support for IEEE_8021QAZ_APP_SEL_STREAM selector 2019-06-20 15:37:02 -04:00
cxlflash SCSI misc on 20190306 2019-03-09 16:53:47 -08:00
device_handler scsi: return blk_status_t from device handler ->prep_fn 2018-11-09 19:17:14 -07:00
dpt
esas2r scsi: ata: Use unsigned int for cmd's type in ioctls in scsi_host_template 2019-02-08 17:33:00 -05:00
fcoe scsi: libfcoe: switch to SPDX tags 2019-05-21 06:16:22 -04:00
fnic scsi: fnic: Remove set but not used variable 'vdev' 2019-01-29 01:16:09 -05:00
hisi_sas scsi: libsas: aic94xx: hisi_sas: mvsas: pm8001: Use dev_is_expander() 2019-06-20 15:37:02 -04:00
ibmvscsi scsi: ibmvscsi: Don't use rc uninitialized in ibmvscsi_do_work 2019-06-18 19:46:24 -04:00
ibmvscsi_tgt scsi: target/core: Remove the write_pending_status() callback function 2019-02-04 21:23:59 -05:00
isci scsi: libsas: aic94xx: hisi_sas: mvsas: pm8001: Use dev_is_expander() 2019-06-20 15:37:02 -04:00
libfc scsi: libfc: switch to SPDX tags 2019-05-21 06:16:22 -04:00
libsas scsi: libsas: aic94xx: hisi_sas: mvsas: pm8001: Use dev_is_expander() 2019-06-20 15:37:02 -04:00
lpfc scsi: lpfc: Avoid unused function warnings 2019-06-18 19:46:25 -04:00
megaraid scsi: megaraid_sas: In probe context, retry IOC INIT once if firmware is in fault 2019-06-27 00:07:35 -04:00
mpt3sas scsi: mpt3sas: Fix msix load balance on and off settings 2019-06-26 22:58:34 -04:00
mvsas scsi: libsas: aic94xx: hisi_sas: mvsas: pm8001: Use dev_is_expander() 2019-06-20 15:37:02 -04:00
pcmcia scsi: fdomain: Add PCMCIA support 2019-06-18 19:46:23 -04:00
pm8001 scsi: pm80xx: Modified the logic to collect IOP event logs 2019-06-27 00:03:21 -04:00
qedf scsi: qedf: remove set but not used variables 2019-04-29 08:34:10 -04:00
qedi SCSI misc on 20190507 2019-05-08 10:12:46 -07:00
qla2xxx scsi: qla2xxx: remove double assignment in qla2x00_update_fcport 2019-06-18 19:46:24 -04:00
qla4xxx Merge branch '5.1/scsi-fixes' into 5.2/merge 2019-04-12 21:27:23 -04:00
smartpqi scsi: smartpqi: Use HCTX_TYPE_DEFAULT for blk_mq_tag_set->map 2019-03-19 15:29:10 -04:00
snic scsi: snic: no need to check return value of debugfs_create functions 2019-01-29 00:40:54 -05:00
sym53c8xx_2 scsi: sym53c8xx_2: sym_nvram: Mark expected switch fall-through 2019-04-08 18:39:14 -05:00
ufs scsi: ufshdc-pci: Add Intel PCI IDs for EHL 2019-06-26 22:42:28 -04:00
.gitignore
3w-9xxx.c scsi: 3w-9xxx: fix calls to dma_set_mask_and_coherent() 2019-02-25 21:37:25 -05:00
3w-9xxx.h
3w-sas.c SCSI fixes on 20190302 2019-03-02 11:39:54 -08:00
3w-sas.h
3w-xxxx.c scsi: 3w-xxxx: fix indentation issue, add missing tab 2018-12-19 21:54:07 -05:00
3w-xxxx.h scsi: 3w-xxx: fully convert to the generic DMA API 2018-10-17 21:58:51 -04:00
53c700_d.h_shipped
53c700.c scsi: 53c700: pass correct "dev" to dma_alloc_attrs() 2019-01-29 01:33:00 -05:00
53c700.h scsi: 53c700: Fix spelling of 'NEGOTIATION' 2018-08-30 07:27:22 -04:00
53c700.scr
a100u2w.c cross-tree: phase out dma_zalloc_coherent() 2019-01-08 07:58:37 -05:00
a100u2w.h
a2091.c scsi: remove the use_clustering flag 2018-12-18 23:19:21 -05:00
a2091.h
a3000.c scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
a3000.h
a4000t.c
advansys.c scsi: remove the use_clustering flag 2018-12-18 23:19:21 -05:00
aha152x.c scsi: remove the use_clustering flag 2018-12-18 23:19:21 -05:00
aha152x.h
aha1542.c scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
aha1542.h
aha1740.c scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
aha1740.h
am53c974.c scsi: esp_scsi: move dma mapping into the core code 2018-10-15 23:00:38 -04:00
atari_scsi.c nvram: Replace nvram_* function exports with static functions 2019-01-22 10:21:43 +01:00
atp870u.c scsi: atp870u: clean up code style and indentation issues 2019-03-19 17:08:35 -04:00
atp870u.h
BusLogic.c scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
BusLogic.h
bvme6000_scsi.c
ch.c
constants.c
dc395x.c scsi: remove the use_clustering flag 2018-12-18 23:19:21 -05:00
dc395x.h
dmx3191d.c scsi: remove the use_clustering flag 2018-12-18 23:19:21 -05:00
dpt_i2o.c scsi: dpt_i2o: clean up indentation issues, remove spaces 2019-03-19 17:10:34 -04:00
dpti.h
esp_scsi.c treewide: Switch printk users from %pf and %pF to %ps and %pS, respectively 2019-04-09 14:19:06 +02:00
esp_scsi.h scsi: esp_scsi: De-duplicate PIO routines 2018-10-17 21:38:20 -04:00
fdomain_isa.c scsi: fdomain: Add register definitions 2019-06-18 19:46:22 -04:00
fdomain_pci.c scsi: fdomain: Resurrect driver - PCI support 2019-06-18 19:46:18 -04:00
fdomain.c scsi: fdomain: Add PCMCIA support 2019-06-18 19:46:23 -04:00
fdomain.h scsi: fdomain: Add register definitions 2019-06-18 19:46:22 -04:00
FlashPoint.c scsi: FlashPoint: Remove unnecessary parentheses 2018-09-25 20:45:53 -04:00
g_NCR5380.c scsi: remove the use_clustering flag 2018-12-18 23:19:21 -05:00
gdth_ioctl.h scsi: gdth: remove dead code under #ifdef GDTH_IOCTL_PROC 2019-01-08 21:58:35 -05:00
gdth_proc.c scsi: gdth: use generic DMA API 2019-01-08 21:58:35 -05:00
gdth_proc.h scsi: gdth: remove gdth_{alloc,free}_ioctl 2019-01-08 21:57:42 -05:00
gdth.c scsi: gdth: Only call dma_free_coherent when buf is not NULL in ioc_general 2019-03-25 22:22:44 -04:00
gdth.h scsi: gdth: remove ISA and EISA support 2019-01-08 21:58:35 -05:00
gvp11.c scsi: remove the use_clustering flag 2018-12-18 23:19:21 -05:00
gvp11.h
hosts.c scsi: core: add SPDX tags to scsi midlayer files missing licensing information 2019-05-21 06:16:21 -04:00
hpsa_cmd.h scsi: hpsa: correct device resets 2019-06-18 19:46:18 -04:00
hpsa.c scsi: hpsa: fix an uninitialized read and dereference of pointer dev 2019-06-18 19:46:23 -04:00
hpsa.h scsi: hpsa: correct device resets 2019-06-18 19:46:18 -04:00
hptiop.c scsi: hptiop: fix calls to dma_set_mask() 2019-02-25 21:44:40 -05:00
hptiop.h
imm.c scsi: imm: mark expected switch fall-throughs 2019-04-08 18:37:37 -05:00
imm.h
initio.c scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
initio.h
ipr.c scsi: ata: Use unsigned int for cmd's type in ioctls in scsi_host_template 2019-02-08 17:33:00 -05:00
ipr.h scsi: ipr: System hung while dlpar adding primary ipr adapter back 2018-09-21 12:35:39 -04:00
ips.c scsi: remove the use_clustering flag 2018-12-18 23:19:21 -05:00
ips.h scsi: ips: properly handle 64-bit DMA 2018-11-06 21:31:28 -05:00
iscsi_boot_sysfs.c
iscsi_tcp.c scsi: remove bidirectional command support 2019-02-05 21:29:21 -05:00
iscsi_tcp.h
jazz_esp.c scsi: esp_scsi: move dma mapping into the core code 2018-10-15 23:00:38 -04:00
Kconfig scsi: fdomain: Resurrect driver - ISA support 2019-06-18 19:46:18 -04:00
lasi700.c
libiscsi_tcp.c scsi: libiscsi: switch to SPDX tags 2019-05-21 06:16:22 -04:00
libiscsi.c scsi: libiscsi: switch to SPDX tags 2019-05-21 06:16:22 -04:00
mac53c94.c scsi: mac53c94: remove DISABLE_CLUSTERING 2018-12-18 23:13:12 -05:00
mac53c94.h
mac_esp.c scsi: remove the use_clustering flag 2018-12-18 23:19:21 -05:00
mac_scsi.c scsi: mac_scsi: Treat Last Byte Sent time-out as failure 2019-06-20 15:37:03 -04:00
Makefile scsi: fdomain: Resurrect driver - ISA support 2019-06-18 19:46:18 -04:00
megaraid.c scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
megaraid.h
mesh.c cross-tree: phase out dma_zalloc_coherent() 2019-01-08 07:58:37 -05:00
mesh.h
mvme16x_scsi.c
mvme147.c scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
mvme147.h
mvumi.c scsi: mvumi: Stop using plain integer as NULL pointer 2019-03-19 17:46:16 -04:00
mvumi.h
myrb.c SCSI misc on 20181224 2018-12-28 14:48:06 -08:00
myrb.h scsi: myrb: Add Mylex RAID controller (block interface) 2018-10-17 21:06:49 -04:00
myrs.c scsi: myrs: remove the dma_boundary_limit 2018-12-19 21:43:30 -05:00
myrs.h scsi: myrs: Add Mylex RAID controller (SCSI interface) 2018-10-17 21:07:54 -04:00
ncr53c8xx.c scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
ncr53c8xx.h
NCR5380.c scsi: NCR5380: Handle PDMA failure reliably 2019-06-20 15:37:03 -04:00
NCR5380.h Revert "scsi: ncr5380: Increase register polling limit" 2019-06-20 15:37:02 -04:00
nsp32_debug.c
nsp32_io.h
nsp32.c scsi: nsp32: Remove unnecessary self assignment in nsp32_set_sync_entry 2019-01-29 01:26:57 -05:00
nsp32.h
pmcraid.c Remove 'type' argument from access_ok() function 2019-01-03 18:57:57 -08:00
pmcraid.h
ppa.c scsi: ppa: mark expected switch fall-through 2019-04-08 18:39:04 -05:00
ppa.h
ps3rom.c scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
qla1280.c scsi/qla1280: Remove stale comment about mmiowb() 2019-04-08 12:09:05 +01:00
qla1280.h
qlogicfas408.c scsi: qlogicfas408: clean up a couple of indentation issues 2019-03-19 17:11:37 -04:00
qlogicfas408.h
qlogicfas.c scsi: remove the use_clustering flag 2018-12-18 23:19:21 -05:00
qlogicpti.c scsi: qlogicpti: Use of_node_name_eq for node name comparisons 2019-02-13 22:07:03 -05:00
qlogicpti.h scsi: qlogicpti: Use of_node_name_eq for node name comparisons 2019-02-13 22:07:03 -05:00
raid_class.c scsi: raid_attrs: fix unused variable warning 2018-08-30 07:21:04 -04:00
script_asm.pl
scsi_common.c
scsi_debug.c SCSI misc on 20190306 2019-03-09 16:53:47 -08:00
scsi_debugfs.c
scsi_debugfs.h scsi: core: add SPDX tags to scsi midlayer files missing licensing information 2019-05-21 06:16:21 -04:00
scsi_devinfo.c scsi: core: add new RDAC LENOVO/DE_Series device 2019-04-03 23:27:23 -04:00
scsi_dh.c scsi: core: add new RDAC LENOVO/DE_Series device 2019-04-03 23:27:23 -04:00
scsi_error.c scsi: Avoid that .queuecommand() gets called for a blocked SCSI device 2019-06-20 15:37:02 -04:00
scsi_ioctl.c scsi: core: add SPDX tags to scsi midlayer files missing licensing information 2019-05-21 06:16:21 -04:00
scsi_lib_dma.c
scsi_lib.c scsi: Avoid that .queuecommand() gets called for a blocked SCSI device 2019-06-20 15:37:02 -04:00
scsi_logging.c scsi: core: switch the remaining scsi midlayer files to use SPDX tags 2019-05-21 06:16:21 -04:00
scsi_logging.h
scsi_netlink.c
scsi_pm.c scsi: sd: Rely on the driver core for asynchronous probing 2019-06-18 19:46:17 -04:00
scsi_priv.h scsi: sd: Rely on the driver core for asynchronous probing 2019-06-18 19:46:17 -04:00
scsi_proc.c
scsi_sas_internal.h
scsi_scan.c scsi: core: map PQ=1, PDT=other values to SCSI_SCAN_TARGET_PRESENT 2019-04-15 22:25:00 -04:00
scsi_sysctl.c scsi: core: switch the remaining scsi midlayer files to use SPDX tags 2019-05-21 06:16:21 -04:00
scsi_sysfs.c scsi: Restrict user space SCSI device state changes to "running" and "offline" 2019-06-20 15:37:02 -04:00
scsi_trace.c scsi: core: switch the remaining scsi midlayer files to use SPDX tags 2019-05-21 06:16:21 -04:00
scsi_transport_api.h
scsi_transport_fc.c scsi: scsi_transport_fc: switch to SPDX tags 2019-05-21 06:16:21 -04:00
scsi_transport_iscsi.c scsi: scsi_transport_iscsi: switch to SPDX tags 2019-05-21 06:16:22 -04:00
scsi_transport_sas.c scsi: scsi_transport_sas: switch to SPDX tags 2019-05-21 06:16:22 -04:00
scsi_transport_spi.c scsi: scsi_transport_spi: switch to SPDX tags 2019-05-21 06:16:22 -04:00
scsi_transport_srp.c scsi: scsi_transport_srp: switch to SPDX tags 2019-05-21 06:16:22 -04:00
scsi.c scsi: sd: Rely on the driver core for asynchronous probing 2019-06-18 19:46:17 -04:00
scsi.h
scsicam.c
sd_dif.c scsi: sd: switch remaining files to SPDX tags 2019-05-21 06:16:23 -04:00
sd_zbc.c scsi: sd: switch remaining files to SPDX tags 2019-05-21 06:16:23 -04:00
sd.c scsi: sd: Inline sd_probe_part2() 2019-06-18 19:46:17 -04:00
sd.h scsi: sd: Fix typo in sd_first_printk() 2019-02-12 22:33:00 -05:00
sense_codes.h
ses.c scsi: ses: switch to SPDX tags 2019-05-21 06:16:23 -04:00
sg.c scsi: sg: switch to SPDX tags 2019-05-21 06:16:23 -04:00
sgiwd93.c scsi: remove the use_clustering flag 2018-12-18 23:19:21 -05:00
sim710.c
sni_53c710.c
sr_ioctl.c block: Switch struct packet_command to use struct scsi_sense_hdr 2018-08-02 15:22:13 -06:00
sr_vendor.c
sr.c scsi: sr: add a SPDX tag to sr.c 2019-05-21 06:16:23 -04:00
sr.h
st_options.h
st.c scsi: osst: kill obsolete driver 2019-06-18 19:46:18 -04:00
st.h
stex.c scsi: remove the use_clustering flag 2018-12-18 23:19:21 -05:00
storvsc_drv.c scsi: storvsc: Add ability to change scsi queue depth 2019-06-20 15:37:02 -04:00
sun3_scsi_vme.c
sun3_scsi.c scsi: remove the use_clustering flag 2018-12-18 23:19:21 -05:00
sun3x_esp.c scsi: esp_scsi: move dma mapping into the core code 2018-10-15 23:00:38 -04:00
sun_esp.c scsi: sun_esp: Use of_node_name_eq for node name comparisons 2018-12-07 21:56:06 -05:00
virtio_scsi.c scsi: virtio_scsi: remove unused 'affinity_hint_set' 2019-06-20 17:52:09 -04:00
vmw_pvscsi.c SCSI misc on 20181224 2018-12-28 14:48:06 -08:00
vmw_pvscsi.h
wd33c93.c
wd33c93.h
wd719x.c scsi: wd719x: Fix resets and aborts 2019-06-20 15:37:02 -04:00
wd719x.h scsi: wd719x: use per-command private data 2018-11-15 14:27:08 -05:00
xen-scsifront.c scsi: xen-scsifront: remove DISABLE_CLUSTERING 2018-12-18 23:13:12 -05:00
zalon.c
zorro7xx.c
zorro_esp.c scsi: esp_scsi: De-duplicate PIO routines 2018-10-17 21:38:20 -04:00