mirror of
https://github.com/torvalds/linux.git
synced 2024-11-19 10:31:48 +00:00
fe273c3e6f
The patch replaces magic numbers with macros defined in DT header in exynos5250 clock bindings. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
42 lines
1.3 KiB
Plaintext
42 lines
1.3 KiB
Plaintext
* Samsung Exynos5250 Clock Controller
|
|
|
|
The Exynos5250 clock controller generates and supplies clock to various
|
|
controllers within the Exynos5250 SoC.
|
|
|
|
Required Properties:
|
|
|
|
- compatible: should be one of the following.
|
|
- "samsung,exynos5250-clock" - controller compatible with Exynos5250 SoC.
|
|
|
|
- reg: physical base address of the controller and length of memory mapped
|
|
region.
|
|
|
|
- #clock-cells: should be 1.
|
|
|
|
Each clock is assigned an identifier and client nodes can use this identifier
|
|
to specify the clock which they consume.
|
|
|
|
All available clocks are defined as preprocessor macros in
|
|
dt-bindings/clock/exynos5250.h header and can be used in device
|
|
tree sources.
|
|
|
|
Example 1: An example of a clock controller node is listed below.
|
|
|
|
clock: clock-controller@0x10010000 {
|
|
compatible = "samsung,exynos5250-clock";
|
|
reg = <0x10010000 0x30000>;
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
Example 2: UART controller node that consumes the clock generated by the clock
|
|
controller. Refer to the standard clock bindings for information
|
|
about 'clocks' and 'clock-names' property.
|
|
|
|
serial@13820000 {
|
|
compatible = "samsung,exynos4210-uart";
|
|
reg = <0x13820000 0x100>;
|
|
interrupts = <0 54 0>;
|
|
clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
|
|
clock-names = "uart", "clk_uart_baud0";
|
|
};
|