linux/arch/arm/oprofile/op_model_v7.c
Jean PIHET 3321c2bcea ARM: 5849/1: ARMv7: fix Oprofile events count
On Oprofile ARMv7 the PMNC_D bit was set to lower the PMU IRQs
and so to decrease the risk of errata #628216 from appearing.
The effect of setting the PMNC_D bit is that the CCNT counter
is divided by 64, making the program counter events count
inaccurate.
The new OMAP3 r4 cores should have that errata fixed.

The PMNC_D bit should not be set, this patch fixes it.

Signed-off-by: Jean Pihet <jpihet@mvista.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-22 15:32:31 +00:00

408 lines
7.8 KiB
C

/**
* op_model_v7.c
* ARM V7 (Cortex A8) Event Monitor Driver
*
* Copyright 2008 Jean Pihet <jpihet@mvista.com>
* Copyright 2004 ARM SMP Development Team
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/oprofile.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/smp.h>
#include "op_counter.h"
#include "op_arm_model.h"
#include "op_model_v7.h"
/* #define DEBUG */
/*
* ARM V7 PMNC support
*/
static u32 cnt_en[CNTMAX];
static inline void armv7_pmnc_write(u32 val)
{
val &= PMNC_MASK;
asm volatile("mcr p15, 0, %0, c9, c12, 0" : : "r" (val));
}
static inline u32 armv7_pmnc_read(void)
{
u32 val;
asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r" (val));
return val;
}
static inline u32 armv7_pmnc_enable_counter(unsigned int cnt)
{
u32 val;
if (cnt >= CNTMAX) {
printk(KERN_ERR "oprofile: CPU%u enabling wrong PMNC counter"
" %d\n", smp_processor_id(), cnt);
return -1;
}
if (cnt == CCNT)
val = CNTENS_C;
else
val = (1 << (cnt - CNT0));
val &= CNTENS_MASK;
asm volatile("mcr p15, 0, %0, c9, c12, 1" : : "r" (val));
return cnt;
}
static inline u32 armv7_pmnc_disable_counter(unsigned int cnt)
{
u32 val;
if (cnt >= CNTMAX) {
printk(KERN_ERR "oprofile: CPU%u disabling wrong PMNC counter"
" %d\n", smp_processor_id(), cnt);
return -1;
}
if (cnt == CCNT)
val = CNTENC_C;
else
val = (1 << (cnt - CNT0));
val &= CNTENC_MASK;
asm volatile("mcr p15, 0, %0, c9, c12, 2" : : "r" (val));
return cnt;
}
static inline u32 armv7_pmnc_enable_intens(unsigned int cnt)
{
u32 val;
if (cnt >= CNTMAX) {
printk(KERN_ERR "oprofile: CPU%u enabling wrong PMNC counter"
" interrupt enable %d\n", smp_processor_id(), cnt);
return -1;
}
if (cnt == CCNT)
val = INTENS_C;
else
val = (1 << (cnt - CNT0));
val &= INTENS_MASK;
asm volatile("mcr p15, 0, %0, c9, c14, 1" : : "r" (val));
return cnt;
}
static inline u32 armv7_pmnc_getreset_flags(void)
{
u32 val;
/* Read */
asm volatile("mrc p15, 0, %0, c9, c12, 3" : "=r" (val));
/* Write to clear flags */
val &= FLAG_MASK;
asm volatile("mcr p15, 0, %0, c9, c12, 3" : : "r" (val));
return val;
}
static inline int armv7_pmnc_select_counter(unsigned int cnt)
{
u32 val;
if ((cnt == CCNT) || (cnt >= CNTMAX)) {
printk(KERN_ERR "oprofile: CPU%u selecting wrong PMNC counteri"
" %d\n", smp_processor_id(), cnt);
return -1;
}
val = (cnt - CNT0) & SELECT_MASK;
asm volatile("mcr p15, 0, %0, c9, c12, 5" : : "r" (val));
return cnt;
}
static inline void armv7_pmnc_write_evtsel(unsigned int cnt, u32 val)
{
if (armv7_pmnc_select_counter(cnt) == cnt) {
val &= EVTSEL_MASK;
asm volatile("mcr p15, 0, %0, c9, c13, 1" : : "r" (val));
}
}
static void armv7_pmnc_reset_counter(unsigned int cnt)
{
u32 cpu_cnt = CPU_COUNTER(smp_processor_id(), cnt);
u32 val = -(u32)counter_config[cpu_cnt].count;
switch (cnt) {
case CCNT:
armv7_pmnc_disable_counter(cnt);
asm volatile("mcr p15, 0, %0, c9, c13, 0" : : "r" (val));
if (cnt_en[cnt] != 0)
armv7_pmnc_enable_counter(cnt);
break;
case CNT0:
case CNT1:
case CNT2:
case CNT3:
armv7_pmnc_disable_counter(cnt);
if (armv7_pmnc_select_counter(cnt) == cnt)
asm volatile("mcr p15, 0, %0, c9, c13, 2" : : "r" (val));
if (cnt_en[cnt] != 0)
armv7_pmnc_enable_counter(cnt);
break;
default:
printk(KERN_ERR "oprofile: CPU%u resetting wrong PMNC counter"
" %d\n", smp_processor_id(), cnt);
break;
}
}
int armv7_setup_pmnc(void)
{
unsigned int cnt;
if (armv7_pmnc_read() & PMNC_E) {
printk(KERN_ERR "oprofile: CPU%u PMNC still enabled when setup"
" new event counter.\n", smp_processor_id());
return -EBUSY;
}
/* Initialize & Reset PMNC: C bit and P bit */
armv7_pmnc_write(PMNC_P | PMNC_C);
for (cnt = CCNT; cnt < CNTMAX; cnt++) {
unsigned long event;
u32 cpu_cnt = CPU_COUNTER(smp_processor_id(), cnt);
/*
* Disable counter
*/
armv7_pmnc_disable_counter(cnt);
cnt_en[cnt] = 0;
if (!counter_config[cpu_cnt].enabled)
continue;
event = counter_config[cpu_cnt].event & 255;
/*
* Set event (if destined for PMNx counters)
* We don't need to set the event if it's a cycle count
*/
if (cnt != CCNT)
armv7_pmnc_write_evtsel(cnt, event);
/*
* Enable interrupt for this counter
*/
armv7_pmnc_enable_intens(cnt);
/*
* Reset counter
*/
armv7_pmnc_reset_counter(cnt);
/*
* Enable counter
*/
armv7_pmnc_enable_counter(cnt);
cnt_en[cnt] = 1;
}
return 0;
}
static inline void armv7_start_pmnc(void)
{
armv7_pmnc_write(armv7_pmnc_read() | PMNC_E);
}
static inline void armv7_stop_pmnc(void)
{
armv7_pmnc_write(armv7_pmnc_read() & ~PMNC_E);
}
/*
* CPU counters' IRQ handler (one IRQ per CPU)
*/
static irqreturn_t armv7_pmnc_interrupt(int irq, void *arg)
{
struct pt_regs *regs = get_irq_regs();
unsigned int cnt;
u32 flags;
/*
* Stop IRQ generation
*/
armv7_stop_pmnc();
/*
* Get and reset overflow status flags
*/
flags = armv7_pmnc_getreset_flags();
/*
* Cycle counter
*/
if (flags & FLAG_C) {
u32 cpu_cnt = CPU_COUNTER(smp_processor_id(), CCNT);
armv7_pmnc_reset_counter(CCNT);
oprofile_add_sample(regs, cpu_cnt);
}
/*
* PMNC counters 0:3
*/
for (cnt = CNT0; cnt < CNTMAX; cnt++) {
if (flags & (1 << (cnt - CNT0))) {
u32 cpu_cnt = CPU_COUNTER(smp_processor_id(), cnt);
armv7_pmnc_reset_counter(cnt);
oprofile_add_sample(regs, cpu_cnt);
}
}
/*
* Allow IRQ generation
*/
armv7_start_pmnc();
return IRQ_HANDLED;
}
int armv7_request_interrupts(int *irqs, int nr)
{
unsigned int i;
int ret = 0;
for (i = 0; i < nr; i++) {
ret = request_irq(irqs[i], armv7_pmnc_interrupt,
IRQF_DISABLED, "CP15 PMNC", NULL);
if (ret != 0) {
printk(KERN_ERR "oprofile: unable to request IRQ%u"
" for ARMv7\n",
irqs[i]);
break;
}
}
if (i != nr)
while (i-- != 0)
free_irq(irqs[i], NULL);
return ret;
}
void armv7_release_interrupts(int *irqs, int nr)
{
unsigned int i;
for (i = 0; i < nr; i++)
free_irq(irqs[i], NULL);
}
#ifdef DEBUG
static void armv7_pmnc_dump_regs(void)
{
u32 val;
unsigned int cnt;
printk(KERN_INFO "PMNC registers dump:\n");
asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r" (val));
printk(KERN_INFO "PMNC =0x%08x\n", val);
asm volatile("mrc p15, 0, %0, c9, c12, 1" : "=r" (val));
printk(KERN_INFO "CNTENS=0x%08x\n", val);
asm volatile("mrc p15, 0, %0, c9, c14, 1" : "=r" (val));
printk(KERN_INFO "INTENS=0x%08x\n", val);
asm volatile("mrc p15, 0, %0, c9, c12, 3" : "=r" (val));
printk(KERN_INFO "FLAGS =0x%08x\n", val);
asm volatile("mrc p15, 0, %0, c9, c12, 5" : "=r" (val));
printk(KERN_INFO "SELECT=0x%08x\n", val);
asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (val));
printk(KERN_INFO "CCNT =0x%08x\n", val);
for (cnt = CNT0; cnt < CNTMAX; cnt++) {
armv7_pmnc_select_counter(cnt);
asm volatile("mrc p15, 0, %0, c9, c13, 2" : "=r" (val));
printk(KERN_INFO "CNT[%d] count =0x%08x\n", cnt-CNT0, val);
asm volatile("mrc p15, 0, %0, c9, c13, 1" : "=r" (val));
printk(KERN_INFO "CNT[%d] evtsel=0x%08x\n", cnt-CNT0, val);
}
}
#endif
static int irqs[] = {
#ifdef CONFIG_ARCH_OMAP3
INT_34XX_BENCH_MPU_EMUL,
#endif
};
static void armv7_pmnc_stop(void)
{
#ifdef DEBUG
armv7_pmnc_dump_regs();
#endif
armv7_stop_pmnc();
armv7_release_interrupts(irqs, ARRAY_SIZE(irqs));
}
static int armv7_pmnc_start(void)
{
int ret;
#ifdef DEBUG
armv7_pmnc_dump_regs();
#endif
ret = armv7_request_interrupts(irqs, ARRAY_SIZE(irqs));
if (ret >= 0)
armv7_start_pmnc();
return ret;
}
static int armv7_detect_pmnc(void)
{
return 0;
}
struct op_arm_model_spec op_armv7_spec = {
.init = armv7_detect_pmnc,
.num_counters = 5,
.setup_ctrs = armv7_setup_pmnc,
.start = armv7_pmnc_start,
.stop = armv7_pmnc_stop,
.name = "arm/armv7",
};