linux/drivers/gpu/drm/pl111/pl111_drm.h
Linus Walleij e08015e7d6 drm/pl111: Support Nomadik LCDC variant
The Nomadik has a variant of the PL110 known as "Color LCD
Controller" LCDC. This variant has the same bit ordering as
the DRM subsystem (in difference from the other variants)
and adds a few bits for the control of 5551, 565 etc in the
control register. Notably it also adds a packed RGB888
24BPP mode.

We add support by detecting this variant and also adding a
small plug-in that will mux the LCDC out if the ASIC happens
to be muxed to the other graphics controller (they are
mutually exclusive).

Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180621184450.25377-1-linus.walleij@linaro.org
2018-07-01 21:36:47 +02:00

95 lines
2.7 KiB
C

/*
*
* (C) COPYRIGHT 2012-2013 ARM Limited. All rights reserved.
*
*
* Parts of this file were based on sources as follows:
*
* Copyright (c) 2006-2008 Intel Corporation
* Copyright (c) 2007 Dave Airlie <airlied@linux.ie>
* Copyright (C) 2011 Texas Instruments
*
* This program is free software and is provided to you under the terms of the
* GNU General Public License version 2 as published by the Free Software
* Foundation, and any use by you of this program is subject to the terms of
* such GNU licence.
*
*/
#ifndef _PL111_DRM_H_
#define _PL111_DRM_H_
#include <drm/drm_gem.h>
#include <drm/drm_simple_kms_helper.h>
#include <drm/drm_connector.h>
#include <drm/drm_encoder.h>
#include <drm/drm_panel.h>
#include <drm/drm_bridge.h>
#include <linux/clk-provider.h>
#include <linux/interrupt.h>
#define CLCD_IRQ_NEXTBASE_UPDATE BIT(2)
struct drm_minor;
/**
* struct pl111_variant_data - encodes IP differences
* @name: the name of this variant
* @is_pl110: this is the early PL110 variant
* @is_lcdc: this is the ST Microelectronics Nomadik LCDC variant
* @external_bgr: this is the Versatile Pl110 variant with external
* BGR/RGB routing
* @broken_clockdivider: the clock divider is broken and we need to
* use the supplied clock directly
* @broken_vblank: the vblank IRQ is broken on this variant
* @st_bitmux_control: this variant is using the ST Micro bitmux
* extensions to the control register
* @formats: array of supported pixel formats on this variant
* @nformats: the length of the array of supported pixel formats
* @fb_bpp: desired bits per pixel on the default framebuffer
*/
struct pl111_variant_data {
const char *name;
bool is_pl110;
bool is_lcdc;
bool external_bgr;
bool broken_clockdivider;
bool broken_vblank;
bool st_bitmux_control;
const u32 *formats;
unsigned int nformats;
unsigned int fb_bpp;
};
struct pl111_drm_dev_private {
struct drm_device *drm;
struct drm_connector *connector;
struct drm_panel *panel;
struct drm_bridge *bridge;
struct drm_simple_display_pipe pipe;
void *regs;
u32 memory_bw;
u32 ienb;
u32 ctrl;
/* The pixel clock (a reference to our clock divider off of CLCDCLK). */
struct clk *clk;
/* pl111's internal clock divider. */
struct clk_hw clk_div;
/* Lock to sync access to CLCD_TIM2 between the common clock
* subsystem and pl111_display_enable().
*/
spinlock_t tim2_lock;
const struct pl111_variant_data *variant;
void (*variant_display_enable) (struct drm_device *drm, u32 format);
void (*variant_display_disable) (struct drm_device *drm);
bool use_device_memory;
};
int pl111_display_init(struct drm_device *dev);
irqreturn_t pl111_irq(int irq, void *data);
int pl111_debugfs_init(struct drm_minor *minor);
#endif /* _PL111_DRM_H_ */