mirror of
https://github.com/torvalds/linux.git
synced 2024-11-18 18:11:56 +00:00
c67d0f2926
This isolates the custom S3C24xx GPIO definition table to <linux/platform_data/gpio-samsung-s3x24xx.h> as this is used in a few different places in the kernel, removing the need to depend on the implicit inclusion of <mach/gpio.h> from <linux/gpio.h> and thus getting rid of a few nasty cross-dependencies. We also delete the nifty CONFIG_S3C24XX_GPIO_EXTRA stuff. The biggest this can ever be for the S3C24XX is CONFIG_S3C24XX_GPIO_EXTRA = 128, and then for CPU_S3C2443 or CPU_S3C2416 32*12 GPIOs are added, so 32*12+128 = 512 is the absolute roof value on this platform. So we set the size of ARCH_NR_GPIO to this and the GPIOs array will fit any S3C24XX platform, as per pattern from other archs. ChangeLog v2->v3: - Move the movement of the S3C64XX gpio.h file out of this patch and into the follow-up patch where it belongs. ChangeLog v1->v2: - Added an #ifdef ARCH_S3C24XX around the header inclusion in drivers/gpio/gpio-samsung.c as we would otherwise have colliding definitions when compiling S3C64XX. - Rename inclusion guard in the header file. Cc: Tomasz Figa <tomasz.figa@gmail.com> Cc: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: linux-samsung-soc@vger.kernel.org Acked-by: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
680 lines
15 KiB
Plaintext
680 lines
15 KiB
Plaintext
# arch/arm/mach-s3c24xx/Kconfig
|
|
#
|
|
# Copyright (c) 2012 Samsung Electronics Co., Ltd.
|
|
# http://www.samsung.com/
|
|
#
|
|
# Copyright 2007 Simtec Electronics
|
|
#
|
|
# Licensed under GPLv2
|
|
|
|
if ARCH_S3C24XX
|
|
|
|
config PLAT_S3C24XX
|
|
def_bool y
|
|
select ARCH_REQUIRE_GPIOLIB
|
|
select NO_IOPORT
|
|
select S3C_DEV_NAND
|
|
select IRQ_DOMAIN
|
|
help
|
|
Base platform code for any Samsung S3C24XX device
|
|
|
|
menu "SAMSUNG S3C24XX SoCs Support"
|
|
|
|
comment "S3C24XX SoCs"
|
|
|
|
config CPU_S3C2410
|
|
bool "SAMSUNG S3C2410"
|
|
default y
|
|
select CPU_ARM920T
|
|
select CPU_LLSERIAL_S3C2410
|
|
select S3C2410_CLOCK
|
|
select S3C2410_DMA if S3C24XX_DMA
|
|
select ARM_S3C2410_CPUFREQ if ARM_S3C24XX_CPUFREQ
|
|
select S3C2410_PM if PM
|
|
select SAMSUNG_WDT_RESET
|
|
help
|
|
Support for S3C2410 and S3C2410A family from the S3C24XX line
|
|
of Samsung Mobile CPUs.
|
|
|
|
config CPU_S3C2412
|
|
bool "SAMSUNG S3C2412"
|
|
select CPU_ARM926T
|
|
select CPU_LLSERIAL_S3C2440
|
|
select S3C2412_DMA if S3C24XX_DMA
|
|
select S3C2412_PM if PM
|
|
help
|
|
Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
|
|
|
|
config CPU_S3C2416
|
|
bool "SAMSUNG S3C2416/S3C2450"
|
|
select CPU_ARM926T
|
|
select CPU_LLSERIAL_S3C2440
|
|
select S3C2416_PM if PM
|
|
select S3C2443_COMMON
|
|
select S3C2443_DMA if S3C24XX_DMA
|
|
select SAMSUNG_CLKSRC
|
|
help
|
|
Support for the S3C2416 SoC from the S3C24XX line
|
|
|
|
config CPU_S3C2440
|
|
bool "SAMSUNG S3C2440"
|
|
select CPU_ARM920T
|
|
select CPU_LLSERIAL_S3C2440
|
|
select S3C2410_CLOCK
|
|
select S3C2410_PM if PM
|
|
select S3C2440_DMA if S3C24XX_DMA
|
|
help
|
|
Support for S3C2440 Samsung Mobile CPU based systems.
|
|
|
|
config CPU_S3C2442
|
|
bool "SAMSUNG S3C2442"
|
|
select CPU_ARM920T
|
|
select CPU_LLSERIAL_S3C2440
|
|
select S3C2410_CLOCK
|
|
select S3C2410_DMA if S3C24XX_DMA
|
|
select S3C2410_PM if PM
|
|
help
|
|
Support for S3C2442 Samsung Mobile CPU based systems.
|
|
|
|
config CPU_S3C244X
|
|
def_bool y
|
|
depends on CPU_S3C2440 || CPU_S3C2442
|
|
select SAMSUNG_WDT_RESET
|
|
|
|
config CPU_S3C2443
|
|
bool "SAMSUNG S3C2443"
|
|
select CPU_ARM920T
|
|
select CPU_LLSERIAL_S3C2440
|
|
select S3C2443_COMMON
|
|
select S3C2443_DMA if S3C24XX_DMA
|
|
select SAMSUNG_CLKSRC
|
|
help
|
|
Support for the S3C2443 SoC from the S3C24XX line
|
|
|
|
# common code
|
|
|
|
config S3C2410_CLOCK
|
|
bool
|
|
help
|
|
Clock code for the S3C2410, and similar processors which
|
|
is currently includes the S3C2410, S3C2440, S3C2442.
|
|
|
|
config S3C24XX_DCLK
|
|
bool
|
|
help
|
|
Clock code for supporting DCLK/CLKOUT on S3C24XX architectures
|
|
|
|
config S3C24XX_SMDK
|
|
bool
|
|
help
|
|
Common machine code for SMDK2410 and SMDK2440
|
|
|
|
config S3C24XX_SIMTEC_AUDIO
|
|
bool
|
|
depends on (ARCH_BAST || MACH_VR1000 || MACH_OSIRIS || MACH_ANUBIS)
|
|
default y
|
|
help
|
|
Add audio devices for common Simtec S3C24XX boards
|
|
|
|
config S3C24XX_SIMTEC_PM
|
|
bool
|
|
help
|
|
Common power management code for systems that are
|
|
compatible with the Simtec style of power management
|
|
|
|
config S3C24XX_SIMTEC_USB
|
|
bool
|
|
help
|
|
USB management code for common Simtec S3C24XX boards
|
|
|
|
config S3C24XX_SETUP_TS
|
|
bool
|
|
help
|
|
Compile in platform device definition for Samsung TouchScreen.
|
|
|
|
config S3C24XX_DMA
|
|
bool "S3C2410 DMA support"
|
|
select S3C_DMA
|
|
help
|
|
S3C2410 DMA support. This is needed for drivers like sound which
|
|
use the S3C2410's DMA system to move data to and from the
|
|
peripheral blocks.
|
|
|
|
config S3C2410_DMA_DEBUG
|
|
bool "S3C2410 DMA support debug"
|
|
depends on S3C2410_DMA
|
|
help
|
|
Enable debugging output for the DMA code. This option sends info
|
|
to the kernel log, at priority KERN_DEBUG.
|
|
|
|
config S3C2410_DMA
|
|
bool
|
|
depends on S3C24XX_DMA && (CPU_S3C2410 || CPU_S3C2442)
|
|
help
|
|
DMA device selection for S3C2410 and compatible CPUs
|
|
|
|
config S3C2410_PM
|
|
bool
|
|
help
|
|
Power Management code common to S3C2410 and better
|
|
|
|
# low-level serial option nodes
|
|
|
|
config CPU_LLSERIAL_S3C2410_ONLY
|
|
bool
|
|
default y if CPU_LLSERIAL_S3C2410 && !CPU_LLSERIAL_S3C2440
|
|
|
|
config CPU_LLSERIAL_S3C2440_ONLY
|
|
bool
|
|
default y if CPU_LLSERIAL_S3C2440 && !CPU_LLSERIAL_S3C2410
|
|
|
|
config CPU_LLSERIAL_S3C2410
|
|
bool
|
|
help
|
|
Selected if there is an S3C2410 (or register compatible) serial
|
|
low-level implementation needed
|
|
|
|
config CPU_LLSERIAL_S3C2440
|
|
bool
|
|
help
|
|
Selected if there is an S3C2440 (or register compatible) serial
|
|
low-level implementation needed
|
|
|
|
config S3C24XX_PLL
|
|
bool "Support CPUfreq changing of PLL frequency (EXPERIMENTAL)"
|
|
depends on ARM_S3C24XX_CPUFREQ
|
|
help
|
|
Compile in support for changing the PLL frequency from the
|
|
S3C24XX series CPUfreq driver. The PLL takes time to settle
|
|
after a frequency change, so by default it is not enabled.
|
|
|
|
This also means that the PLL tables for the selected CPU(s) will
|
|
be built which may increase the size of the kernel image.
|
|
|
|
# cpu frequency items common between s3c2410 and s3c2440/s3c2442
|
|
|
|
config S3C2410_IOTIMING
|
|
bool
|
|
depends on ARM_S3C24XX_CPUFREQ
|
|
help
|
|
Internal node to select io timing code that is common to the s3c2410
|
|
and s3c2440/s3c2442 cpu frequency support.
|
|
|
|
config S3C2410_CPUFREQ_UTILS
|
|
bool
|
|
depends on ARM_S3C24XX_CPUFREQ
|
|
help
|
|
Internal node to select timing code that is common to the s3c2410
|
|
and s3c2440/s3c244 cpu frequency support.
|
|
|
|
# cpu frequency support common to s3c2412, s3c2413 and s3c2442
|
|
|
|
config S3C2412_IOTIMING
|
|
bool
|
|
depends on ARM_S3C24XX_CPUFREQ && (CPU_S3C2412 || CPU_S3C2443)
|
|
help
|
|
Intel node to select io timing code that is common to the s3c2412
|
|
and the s3c2443.
|
|
|
|
# cpu-specific sections
|
|
|
|
if CPU_S3C2410
|
|
|
|
config S3C2410_PLL
|
|
bool
|
|
depends on ARM_S3C2410_CPUFREQ && S3C24XX_PLL
|
|
default y
|
|
help
|
|
Select the PLL table for the S3C2410
|
|
|
|
config S3C24XX_SIMTEC_NOR
|
|
bool
|
|
help
|
|
Internal node to specify machine has simtec NOR mapping
|
|
|
|
config MACH_BAST_IDE
|
|
bool
|
|
select HAVE_PATA_PLATFORM
|
|
help
|
|
Internal node for machines with an BAST style IDE
|
|
interface
|
|
|
|
comment "S3C2410 Boards"
|
|
|
|
#
|
|
# The "S3C2410 Boards" list is ordered alphabetically by option text.
|
|
# (without ARCH_ or MACH_)
|
|
#
|
|
|
|
config MACH_AML_M5900
|
|
bool "AML M5900 Series"
|
|
select S3C24XX_SIMTEC_PM if PM
|
|
select S3C_DEV_USB_HOST
|
|
help
|
|
Say Y here if you are using the American Microsystems M5900 Series
|
|
<http://www.amltd.com>
|
|
|
|
config ARCH_BAST
|
|
bool "Simtec Electronics BAST (EB2410ITX)"
|
|
select ISA
|
|
select MACH_BAST_IDE
|
|
select S3C2410_IOTIMING if ARM_S3C2410_CPUFREQ
|
|
select S3C24XX_DCLK
|
|
select S3C24XX_SIMTEC_NOR
|
|
select S3C24XX_SIMTEC_PM if PM
|
|
select S3C24XX_SIMTEC_USB
|
|
select S3C_DEV_HWMON
|
|
select S3C_DEV_NAND
|
|
select S3C_DEV_USB_HOST
|
|
help
|
|
Say Y here if you are using the Simtec Electronics EB2410ITX
|
|
development board (also known as BAST)
|
|
|
|
config BAST_PC104_IRQ
|
|
bool "BAST PC104 IRQ support"
|
|
depends on ARCH_BAST
|
|
default y
|
|
help
|
|
Say Y here to enable the PC104 IRQ routing on the
|
|
Simtec BAST (EB2410ITX)
|
|
|
|
config ARCH_H1940
|
|
bool "IPAQ H1940"
|
|
select PM_H1940 if PM
|
|
select S3C24XX_SETUP_TS
|
|
select S3C_DEV_NAND
|
|
select S3C_DEV_USB_HOST
|
|
help
|
|
Say Y here if you are using the HP IPAQ H1940
|
|
|
|
config H1940BT
|
|
tristate "Control the state of H1940 bluetooth chip"
|
|
depends on ARCH_H1940
|
|
select RFKILL
|
|
help
|
|
This is a simple driver that is able to control
|
|
the state of built in bluetooth chip on h1940.
|
|
|
|
config PM_H1940
|
|
bool
|
|
help
|
|
Internal node for H1940 and related PM
|
|
|
|
config MACH_N30
|
|
bool "Acer N30 family"
|
|
select S3C_DEV_NAND
|
|
select S3C_DEV_USB_HOST
|
|
help
|
|
Say Y here if you want suppt for the Acer N30, Acer N35,
|
|
Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs.
|
|
|
|
config MACH_OTOM
|
|
bool "NexVision OTOM Board"
|
|
select S3C_DEV_NAND
|
|
select S3C_DEV_USB_HOST
|
|
help
|
|
Say Y here if you are using the Nex Vision OTOM board
|
|
|
|
config MACH_QT2410
|
|
bool "QT2410"
|
|
select S3C_DEV_NAND
|
|
select S3C_DEV_USB_HOST
|
|
help
|
|
Say Y here if you are using the Armzone QT2410
|
|
|
|
config ARCH_SMDK2410
|
|
bool "SMDK2410/A9M2410"
|
|
select S3C24XX_SMDK
|
|
select S3C_DEV_USB_HOST
|
|
help
|
|
Say Y here if you are using the SMDK2410 or the derived module A9M2410
|
|
<http://www.fsforth.de>
|
|
|
|
config MACH_TCT_HAMMER
|
|
bool "TCT Hammer Board"
|
|
select S3C_DEV_USB_HOST
|
|
help
|
|
Say Y here if you are using the TinCanTools Hammer Board
|
|
<http://www.tincantools.com>
|
|
|
|
config MACH_VR1000
|
|
bool "Thorcom VR1000"
|
|
select MACH_BAST_IDE
|
|
select S3C24XX_DCLK
|
|
select S3C24XX_SIMTEC_NOR
|
|
select S3C24XX_SIMTEC_PM if PM
|
|
select S3C24XX_SIMTEC_USB
|
|
select S3C_DEV_USB_HOST
|
|
help
|
|
Say Y here if you are using the Thorcom VR1000 board.
|
|
|
|
endif # CPU_S3C2410
|
|
|
|
config S3C2412_PM_SLEEP
|
|
bool
|
|
help
|
|
Internal config node to apply sleep for S3C2412 power management.
|
|
Can be selected by another SoCs such as S3C2416 with similar
|
|
sleep procedure.
|
|
|
|
if CPU_S3C2412
|
|
|
|
config CPU_S3C2412_ONLY
|
|
bool
|
|
depends on !CPU_S3C2410 && !CPU_S3C2416 && !CPU_S3C2440 && \
|
|
!CPU_S3C2442 && !CPU_S3C2443
|
|
default y
|
|
|
|
config S3C2412_DMA
|
|
bool
|
|
help
|
|
Internal config node for S3C2412 DMA support
|
|
|
|
config S3C2412_PM
|
|
bool
|
|
select S3C2412_PM_SLEEP
|
|
select SAMSUNG_WAKEMASK
|
|
help
|
|
Internal config node to apply S3C2412 power management
|
|
|
|
comment "S3C2412 Boards"
|
|
|
|
#
|
|
# The "S3C2412 Boards" list is ordered alphabetically by option text.
|
|
# (without ARCH_ or MACH_)
|
|
#
|
|
|
|
config MACH_JIVE
|
|
bool "Logitech Jive"
|
|
select S3C_DEV_NAND
|
|
select S3C_DEV_USB_HOST
|
|
help
|
|
Say Y here if you are using the Logitech Jive.
|
|
|
|
config MACH_JIVE_SHOW_BOOTLOADER
|
|
bool "Allow access to bootloader partitions in MTD"
|
|
depends on MACH_JIVE
|
|
|
|
config MACH_S3C2413
|
|
bool
|
|
help
|
|
Internal node for S3C2413 version of SMDK2413, so that
|
|
machine_is_s3c2413() will work when MACH_SMDK2413 is
|
|
selected
|
|
|
|
config MACH_SMDK2412
|
|
bool "SMDK2412"
|
|
select MACH_SMDK2413
|
|
help
|
|
Say Y here if you are using an SMDK2412
|
|
|
|
Note, this shares support with SMDK2413, so will automatically
|
|
select MACH_SMDK2413.
|
|
|
|
config MACH_SMDK2413
|
|
bool "SMDK2413"
|
|
select MACH_S3C2413
|
|
select S3C24XX_SMDK
|
|
select S3C_DEV_NAND
|
|
select S3C_DEV_USB_HOST
|
|
help
|
|
Say Y here if you are using an SMDK2413
|
|
|
|
config MACH_VSTMS
|
|
bool "VMSTMS"
|
|
select S3C_DEV_NAND
|
|
select S3C_DEV_USB_HOST
|
|
help
|
|
Say Y here if you are using an VSTMS board
|
|
|
|
endif # CPU_S3C2412
|
|
|
|
if CPU_S3C2416
|
|
|
|
config S3C2416_PM
|
|
bool
|
|
select S3C2412_PM_SLEEP
|
|
help
|
|
Internal config node to apply S3C2416 power management
|
|
|
|
config S3C2416_SETUP_SDHCI
|
|
bool
|
|
select S3C2416_SETUP_SDHCI_GPIO
|
|
help
|
|
Internal helper functions for S3C2416 based SDHCI systems
|
|
|
|
config S3C2416_SETUP_SDHCI_GPIO
|
|
bool
|
|
help
|
|
Common setup code for SDHCI gpio.
|
|
|
|
comment "S3C2416 Boards"
|
|
|
|
config MACH_SMDK2416
|
|
bool "SMDK2416"
|
|
select S3C2416_SETUP_SDHCI
|
|
select S3C24XX_SMDK
|
|
select S3C_DEV_FB
|
|
select S3C_DEV_HSMMC
|
|
select S3C_DEV_HSMMC1
|
|
select S3C_DEV_NAND
|
|
select S3C_DEV_USB_HOST
|
|
help
|
|
Say Y here if you are using an SMDK2416
|
|
|
|
config MACH_S3C2416_DT
|
|
bool "Samsung S3C2416 machine using devicetree"
|
|
select CLKSRC_OF
|
|
select USE_OF
|
|
select PINCTRL
|
|
select PINCTRL_S3C24XX
|
|
help
|
|
Machine support for Samsung S3C2416 machines with device tree enabled.
|
|
Select this if a fdt blob is available for the S3C2416 SoC based board.
|
|
Note: This is under development and not all peripherals can be supported
|
|
with this machine file.
|
|
|
|
endif # CPU_S3C2416
|
|
|
|
if CPU_S3C2440
|
|
|
|
config S3C2440_DMA
|
|
bool
|
|
help
|
|
Support for S3C2440 specific DMA code5A
|
|
|
|
config S3C2440_XTAL_12000000
|
|
bool
|
|
help
|
|
Indicate that the build needs to support 12MHz system
|
|
crystal.
|
|
|
|
config S3C2440_XTAL_16934400
|
|
bool
|
|
help
|
|
Indicate that the build needs to support 16.9344MHz system
|
|
crystal.
|
|
|
|
config S3C2440_PLL_12000000
|
|
bool
|
|
depends on ARM_S3C2440_CPUFREQ && S3C2440_XTAL_12000000
|
|
default y if S3C24XX_PLL
|
|
help
|
|
PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals.
|
|
|
|
config S3C2440_PLL_16934400
|
|
bool
|
|
depends on ARM_S3C2440_CPUFREQ && S3C2440_XTAL_16934400
|
|
default y if S3C24XX_PLL
|
|
help
|
|
PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
|
|
|
|
comment "S3C2440 Boards"
|
|
|
|
#
|
|
# The "S3C2440 Boards" list is ordered alphabetically by option text.
|
|
# (without ARCH_ or MACH_)
|
|
#
|
|
|
|
config MACH_ANUBIS
|
|
bool "Simtec Electronics ANUBIS"
|
|
select HAVE_PATA_PLATFORM
|
|
select S3C2440_XTAL_12000000
|
|
select S3C24XX_DCLK
|
|
select S3C24XX_GPIO_EXTRA64
|
|
select S3C24XX_SIMTEC_PM if PM
|
|
select S3C_DEV_USB_HOST
|
|
help
|
|
Say Y here if you are using the Simtec Electronics ANUBIS
|
|
development system
|
|
|
|
config MACH_AT2440EVB
|
|
bool "Avantech AT2440EVB development board"
|
|
select S3C_DEV_NAND
|
|
select S3C_DEV_USB_HOST
|
|
help
|
|
Say Y here if you are using the AT2440EVB development board
|
|
|
|
config MACH_MINI2440
|
|
bool "MINI2440 development board"
|
|
select EEPROM_AT24
|
|
select LEDS_CLASS
|
|
select LEDS_TRIGGERS
|
|
select LEDS_TRIGGER_BACKLIGHT
|
|
select NEW_LEDS
|
|
select S3C_DEV_NAND
|
|
select S3C_DEV_USB_HOST
|
|
select S3C_SETUP_CAMIF
|
|
help
|
|
Say Y here to select support for the MINI2440. Is a 10cm x 10cm board
|
|
available via various sources. It can come with a 3.5" or 7" touch LCD.
|
|
|
|
config MACH_NEXCODER_2440
|
|
bool "NexVision NEXCODER 2440 Light Board"
|
|
select S3C2440_XTAL_12000000
|
|
select S3C_DEV_NAND
|
|
select S3C_DEV_USB_HOST
|
|
help
|
|
Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
|
|
|
|
config MACH_OSIRIS
|
|
bool "Simtec IM2440D20 (OSIRIS) module"
|
|
select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ
|
|
select S3C2440_XTAL_12000000
|
|
select S3C24XX_DCLK
|
|
select S3C24XX_GPIO_EXTRA128
|
|
select S3C24XX_SIMTEC_PM if PM
|
|
select S3C_DEV_NAND
|
|
select S3C_DEV_USB_HOST
|
|
help
|
|
Say Y here if you are using the Simtec IM2440D20 module, also
|
|
known as the Osiris.
|
|
|
|
config MACH_OSIRIS_DVS
|
|
tristate "Simtec IM2440D20 (OSIRIS) Dynamic Voltage Scaling driver"
|
|
depends on MACH_OSIRIS
|
|
select TPS65010
|
|
help
|
|
Say Y/M here if you want to have dynamic voltage scaling support
|
|
on the Simtec IM2440D20 (OSIRIS) module via the TPS65011.
|
|
|
|
The DVS driver alters the voltage supplied to the ARM core
|
|
depending on the frequency it is running at. The driver itself
|
|
does not do any of the frequency alteration, which is left up
|
|
to the cpufreq driver.
|
|
|
|
config MACH_RX3715
|
|
bool "HP iPAQ rx3715"
|
|
select PM_H1940 if PM
|
|
select S3C2440_XTAL_16934400
|
|
select S3C_DEV_NAND
|
|
help
|
|
Say Y here if you are using the HP iPAQ rx3715.
|
|
|
|
config ARCH_S3C2440
|
|
bool "SMDK2440"
|
|
select S3C2440_XTAL_16934400
|
|
select S3C24XX_SMDK
|
|
select S3C_DEV_NAND
|
|
select S3C_DEV_USB_HOST
|
|
help
|
|
Say Y here if you are using the SMDK2440.
|
|
|
|
config SMDK2440_CPU2440
|
|
bool "SMDK2440 with S3C2440 CPU module"
|
|
default y if ARCH_S3C2440
|
|
select S3C2440_XTAL_16934400
|
|
|
|
endif # CPU_S3C2440
|
|
|
|
if CPU_S3C2442
|
|
|
|
comment "S3C2442 Boards"
|
|
|
|
#
|
|
# The "S3C2442 Boards" list is ordered alphabetically by option text.
|
|
# (without ARCH_ or MACH_)
|
|
#
|
|
|
|
config MACH_NEO1973_GTA02
|
|
bool "Openmoko GTA02 / Freerunner phone"
|
|
select I2C
|
|
select MFD_PCF50633
|
|
select PCF50633_GPIO
|
|
select POWER_SUPPLY
|
|
select S3C24XX_PWM
|
|
select S3C_DEV_USB_HOST
|
|
help
|
|
Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
|
|
|
|
config MACH_RX1950
|
|
bool "HP iPAQ rx1950"
|
|
select I2C
|
|
select PM_H1940 if PM
|
|
select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ
|
|
select S3C2440_XTAL_16934400
|
|
select S3C24XX_DCLK
|
|
select S3C24XX_PWM
|
|
select S3C_DEV_NAND
|
|
help
|
|
Say Y here if you're using HP iPAQ rx1950
|
|
|
|
endif # CPU_S3C2442
|
|
|
|
if CPU_S3C2443 || CPU_S3C2416
|
|
|
|
config S3C2443_COMMON
|
|
bool
|
|
help
|
|
Common code for the S3C2443 and similar processors, which includes
|
|
the S3C2416 and S3C2450.
|
|
|
|
config S3C2443_DMA
|
|
bool
|
|
help
|
|
Internal config node for S3C2443 DMA support
|
|
|
|
config S3C2443_SETUP_SPI
|
|
bool
|
|
help
|
|
Common setup code for SPI GPIO configurations
|
|
|
|
endif # CPU_S3C2443 || CPU_S3C2416
|
|
|
|
if CPU_S3C2443
|
|
|
|
comment "S3C2443 Boards"
|
|
|
|
config MACH_SMDK2443
|
|
bool "SMDK2443"
|
|
select S3C24XX_SMDK
|
|
select S3C_DEV_HSMMC1
|
|
help
|
|
Say Y here if you are using an SMDK2443
|
|
|
|
endif # CPU_S3C2443
|
|
|
|
endmenu # SAMSUNG S3C24XX SoCs Support
|
|
|
|
endif # ARCH_S3C24XX
|