linux/drivers/cpuidle
Linus Torvalds 133d970e0d Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS updates from Ralf Baechle:
 "This is the main MIPS pull request for 4.9:

  MIPS core arch code:
   - traps: 64bit kernels should read CP0_EBase 64bit
   - traps: Convert ebase to KSEG0
   - c-r4k: Drop bc_wback_inv() from icache flush
   - c-r4k: Split user/kernel flush_icache_range()
   - cacheflush: Use __flush_icache_user_range()
   - uprobes: Flush icache via kernel address
   - KVM: Use __local_flush_icache_user_range()
   - c-r4k: Fix flush_icache_range() for EVA
   - Fix -mabi=64 build of vdso.lds
   - VDSO: Drop duplicated -I*/-E* aflags
   - tracing: move insn_has_delay_slot to a shared header
   - tracing: disable uprobe/kprobe on compact branch instructions
   - ptrace: Fix regs_return_value for kernel context
   - Squash lines for simple wrapper functions
   - Move identification of VP(E) into proc.c from smp-mt.c
   - Add definitions of SYNC barrierstype values
   - traps: Ensure full EBase is written
   - tlb-r4k: If there are wired entries, don't use TLBINVF
   - Sanitise coherentio semantics
   - dma-default: Don't check hw_coherentio if device is non-coherent
   - Support per-device DMA coherence
   - Adjust MIPS64 CAC_BASE to reflect Config.K0
   - Support generating Flattened Image Trees (.itb)
   - generic: Introduce generic DT-based board support
   - generic: Convert SEAD-3 to a generic board
   - Enable hardened usercopy
   - Don't specify STACKPROTECTOR in defconfigs

  Octeon:
   - Delete dead code and files across the platform.
   - Change to use all memory into use by default.
   - Rename upper case variables in setup code to lowercase.
   - Delete legacy hack for broken bootloaders.
   - Leave maintaining the link state to the actual ethernet/PHY drivers.
   - Add DTS for D-Link DSR-500N.
   - Fix PCI interrupt routing on D-Link DSR-500N.

  Pistachio:
   - Remove ANDROID_TIMED_OUTPUT from defconfig

  TX39xx:
   - Move GPIO setup from .mem_setup() to .arch_init()
   - Convert to Common Clock Framework

  TX49xx:
   - Move GPIO setup from .mem_setup() to .arch_init()
   - Convert to Common Clock Framework

  txx9wdt:
   - Add missing clock (un)prepare calls for CCF

  BMIPS:
   - Add PW, GPIO SDHCI and NAND device node names
   - Support APPENDED_DTB
   - Add missing bcm97435svmb to DT_NONE
   - Rename bcm96358nb4ser to bcm6358-neufbox4-sercom
   - Add DT examples for BCM63268, BCM3368 and BCM6362
   - Add support for BCM3368 and BCM6362

  PCI
   - Reduce stack frame usage
   - Use struct list_head lists
   - Support for CONFIG_PCI_DOMAINS_GENERIC
   - Make pcibios_set_cache_line_size an initcall
   - Inline pcibios_assign_all_busses
   - Split pci.c into pci.c & pci-legacy.c
   - Introduce CONFIG_PCI_DRIVERS_LEGACY
   - Support generic drivers

  CPC
   - Convert bare 'unsigned' to 'unsigned int'
   - Avoid lock when MIPS CM >= 3 is present

  GIC:
   - Delete unused file smp-gic.c

  mt7620:
   - Delete unnecessary assignment for the field "owner" from PCI

  BCM63xx:
   - Let clk_disable() return immediately if clk is NULL

  pm-cps:
   - Change FSB workaround to CPU blacklist
   - Update comments on barrier instructions
   - Use MIPS standard lightweight ordering barrier
   - Use MIPS standard completion barrier
   - Remove selection of sync types
   - Add MIPSr6 CPU support
   - Support CM3 changes to Coherence Enable Register

  SMP:
   - Wrap call to mips_cpc_lock_other in mips_cm_lock_other
   - Introduce mechanism for freeing and allocating IPIs

  cpuidle:
   - cpuidle-cps: Enable use with MIPSr6 CPUs.

  SEAD3:
   - Rewrite to use DT and generic kernel feature.

  USB:
   - host: ehci-sead3: Remove SEAD-3 EHCI code

  FBDEV:
   - cobalt_lcdfb: Drop SEAD3 support

  dt-bindings:
   -  Document a binding for simple ASCII LCDs

  auxdisplay:
   - img-ascii-lcd: driver for simple ASCII LCD displays

  irqchip i8259:
   - i8259: Add domain before mapping parent irq
   - i8259: Allow platforms to override poll function
   - i8259: Remove unused i8259A_irq_pending

  Malta:
   - Rewrite to use DT

  of/platform:
   - Probe "isa" busses by default

  CM:
   - Print CM error reports upon bus errors

  Module:
   - Migrate exception table users off module.h and onto extable.h
   - Make various drivers explicitly non-modular:
   - Audit and remove any unnecessary uses of module.h

  mailmap:
   - Canonicalize to Qais' current email address.

  Documentation:
   - MIPS supports HAVE_REGS_AND_STACK_ACCESS_API

  Loongson1C:
   - Add CPU support for Loongson1C
   - Add board support
   - Add defconfig
   - Add RTC support for Loongson1C board

  All this except one Documentation fix has sat in linux-next and has
  survived Imagination's automated build test system"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (127 commits)
  Documentation: MIPS supports HAVE_REGS_AND_STACK_ACCESS_API
  MIPS: ptrace: Fix regs_return_value for kernel context
  MIPS: VDSO: Drop duplicated -I*/-E* aflags
  MIPS: Fix -mabi=64 build of vdso.lds
  MIPS: Enable hardened usercopy
  MIPS: generic: Convert SEAD-3 to a generic board
  MIPS: generic: Introduce generic DT-based board support
  MIPS: Support generating Flattened Image Trees (.itb)
  MIPS: Adjust MIPS64 CAC_BASE to reflect Config.K0
  MIPS: Print CM error reports upon bus errors
  MIPS: Support per-device DMA coherence
  MIPS: dma-default: Don't check hw_coherentio if device is non-coherent
  MIPS: Sanitise coherentio semantics
  MIPS: PCI: Support generic drivers
  MIPS: PCI: Introduce CONFIG_PCI_DRIVERS_LEGACY
  MIPS: PCI: Split pci.c into pci.c & pci-legacy.c
  MIPS: PCI: Inline pcibios_assign_all_busses
  MIPS: PCI: Make pcibios_set_cache_line_size an initcall
  MIPS: PCI: Support for CONFIG_PCI_DOMAINS_GENERIC
  MIPS: PCI: Use struct list_head lists
  ...
2016-10-15 09:26:12 -07:00
..
governors cpuidle: menu: Fall back to polling if next timer event is near 2016-03-21 15:50:28 +01:00
coupled.c cpuidle/coupled: Convert to hotplug state machine 2016-09-06 18:30:24 +02:00
cpuidle-arm.c Merge branches 'pm-cpuidle', 'pm-opp' and 'pm-avs' 2016-10-02 01:43:16 +02:00
cpuidle-at91.c drivers/cpuidle: Convert non-modular drivers to use builtin_platform_driver 2015-06-16 14:12:38 -04:00
cpuidle-big_little.c ARM: MCPM: remove residency argument from mcpm_cpu_suspend() 2015-05-06 11:47:10 -04:00
cpuidle-calxeda.c ARM: migrate to common PSCI client code 2015-08-03 15:38:39 +01:00
cpuidle-clps711x.c drivers/cpuidle: make cpuidle-clps711x.c explicitly non-modular 2015-12-15 00:22:21 +01:00
cpuidle-cps.c cpuidle: cpuidle-cps: Enable use with MIPSr6 CPUs. 2016-10-04 16:13:57 +02:00
cpuidle-exynos.c drivers/cpuidle: make cpuidle-exynos.c explicitly non-modular 2015-12-15 00:22:22 +01:00
cpuidle-kirkwood.c ARM: cpuidle: Remove duplicate header inclusion 2015-03-23 18:03:11 +01:00
cpuidle-mvebu-v7.c cpuidle: mvebu: disable the bind/unbind attributes and use builtin_platform_driver 2015-10-23 12:40:48 +02:00
cpuidle-powernv.c cpuidle/powernv: Convert to hotplug state machine 2016-09-06 18:30:24 +02:00
cpuidle-pseries.c cpuidle/pseries: Convert to hotplug state machine 2016-09-06 18:30:24 +02:00
cpuidle-ux500.c drivers/cpuidle: make cpuidle-ux500.c explicitly non-modular 2015-12-15 00:22:22 +01:00
cpuidle-zynq.c drivers/cpuidle: Convert non-modular drivers to use builtin_platform_driver 2015-06-16 14:12:38 -04:00
cpuidle.c cpuidle: Fix last_residency division 2016-07-04 14:17:34 +02:00
cpuidle.h cpuidle/coupled: Add sanity check for safe_state_index 2015-09-03 03:05:47 +02:00
driver.c nmi_backtrace: generate one-line reports for idle cpus 2016-10-07 18:46:30 -07:00
dt_idle_states.c Merge back earlier cpuidle material for 3.19-rc1. 2014-11-21 16:31:42 +01:00
dt_idle_states.h drivers: cpuidle: implement DT based idle states infrastructure 2014-09-25 10:52:20 +02:00
governor.c cpuidle: Replace strnicmp with strncasecmp 2014-09-25 01:17:10 +02:00
Kconfig cpuidle: Don't enable all governors by default 2016-01-15 22:39:58 +01:00
Kconfig.arm ARM: cpuidle: Enable the ARM64 driver for both ARM32/ARM64 2015-03-24 10:16:11 +01:00
Kconfig.mips cpuidle: cpuidle-cps: Enable use with MIPSr6 CPUs. 2016-10-04 16:13:57 +02:00
Kconfig.powerpc powerpc/powernv/cpuidle: Back-end cpuidle driver for powernv platform. 2014-01-29 17:02:24 +11:00
Makefile ARM: cpuidle: Enable the ARM64 driver for both ARM32/ARM64 2015-03-24 10:16:11 +01:00
sysfs.c cpuidle: remove state_count field from struct cpuidle_device 2015-04-03 13:15:50 +02:00