Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-15 00:21:59 +00:00
Code Issues Packages Projects Releases Wiki Activity
c3630df66f
linux/drivers/media/usb/pvrusb2/pvrusb2-devattr.c
Julia Lawall e4b0e7d618 media: pvrusb2: use semicolons rather than commas to separate statements 
Replace commas with semicolons.  Commas introduce unnecessary
variability in the code structure and are hard to see.  What is done
is essentially described by the following Coccinelle semantic patch
(http://coccinelle.lip6.fr/):

// <smpl>
@@ expression e1,e2; @@
e1
-,
+;
e2
... when any
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-16 10:31:06 +01:00

719 lines
21 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0-only
/*
*
* Copyright (C) 2007 Mike Isely <isely@pobox.com>
*/
/*
This source file should encompass ALL per-device type information for the
driver. To define a new device, add elements to the pvr2_device_table and
pvr2_device_desc structures.
*/
#include "pvrusb2-devattr.h"
#include <linux/usb.h>
#include <linux/module.h>
/* This is needed in order to pull in tuner type ids... */
#include <linux/i2c.h>
#include <media/tuner.h>
#ifdef CONFIG_VIDEO_PVRUSB2_DVB
#include "pvrusb2-hdw-internal.h"
#include "lgdt330x.h"
#include "s5h1409.h"
#include "s5h1411.h"
#include "tda10048.h"
#include "tda18271.h"
#include "tda8290.h"
#include "tuner-simple.h"
#include "si2157.h"
#include "lgdt3306a.h"
#include "si2168.h"
#endif
/*------------------------------------------------------------------------*/
/* Hauppauge PVR-USB2 Model 29xxx */
static const struct pvr2_device_client_desc pvr2_cli_29xxx[] = {
{ .module_id = PVR2_CLIENT_ID_SAA7115 },
{ .module_id = PVR2_CLIENT_ID_MSP3400 },
{ .module_id = PVR2_CLIENT_ID_TUNER },
{ .module_id = PVR2_CLIENT_ID_DEMOD },
};
#define PVR2_FIRMWARE_29xxx "v4l-pvrusb2-29xxx-01.fw"
static const char *pvr2_fw1_names_29xxx[] = {
PVR2_FIRMWARE_29xxx,
};
static const struct pvr2_device_desc pvr2_device_29xxx = {
.description = "WinTV PVR USB2 Model 29xxx",
.shortname = "29xxx",
.client_table.lst = pvr2_cli_29xxx,
.client_table.cnt = ARRAY_SIZE(pvr2_cli_29xxx),
.fx2_firmware.lst = pvr2_fw1_names_29xxx,
.fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_29xxx),
.flag_has_hauppauge_rom = !0,
.flag_has_analogtuner = !0,
.flag_has_fmradio = !0,
.flag_has_composite = !0,
.flag_has_svideo = !0,
.signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE,
.led_scheme = PVR2_LED_SCHEME_HAUPPAUGE,
.ir_scheme = PVR2_IR_SCHEME_29XXX,
};
/*------------------------------------------------------------------------*/
/* Hauppauge PVR-USB2 Model 24xxx */
static const struct pvr2_device_client_desc pvr2_cli_24xxx[] = {
{ .module_id = PVR2_CLIENT_ID_CX25840 },
{ .module_id = PVR2_CLIENT_ID_TUNER },
{ .module_id = PVR2_CLIENT_ID_WM8775 },
{ .module_id = PVR2_CLIENT_ID_DEMOD },
};
#define PVR2_FIRMWARE_24xxx "v4l-pvrusb2-24xxx-01.fw"
static const char *pvr2_fw1_names_24xxx[] = {
PVR2_FIRMWARE_24xxx,
};
static const struct pvr2_device_desc pvr2_device_24xxx = {
.description = "WinTV PVR USB2 Model 24xxx",
.shortname = "24xxx",
.client_table.lst = pvr2_cli_24xxx,
.client_table.cnt = ARRAY_SIZE(pvr2_cli_24xxx),
.fx2_firmware.lst = pvr2_fw1_names_24xxx,
.fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_24xxx),
.flag_has_cx25840 = !0,
.flag_has_wm8775 = !0,
.flag_has_hauppauge_rom = !0,
.flag_has_analogtuner = !0,
.flag_has_fmradio = !0,
.flag_has_composite = !0,
.flag_has_svideo = !0,
.signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE,
.led_scheme = PVR2_LED_SCHEME_HAUPPAUGE,
.ir_scheme = PVR2_IR_SCHEME_24XXX,
};
/*------------------------------------------------------------------------*/
/* GOTVIEW USB2.0 DVD2 */
static const struct pvr2_device_client_desc pvr2_cli_gotview_2[] = {
{ .module_id = PVR2_CLIENT_ID_CX25840 },
{ .module_id = PVR2_CLIENT_ID_TUNER },
{ .module_id = PVR2_CLIENT_ID_DEMOD },
};
static const struct pvr2_device_desc pvr2_device_gotview_2 = {
.description = "Gotview USB 2.0 DVD 2",
.shortname = "gv2",
.client_table.lst = pvr2_cli_gotview_2,
.client_table.cnt = ARRAY_SIZE(pvr2_cli_gotview_2),
.flag_has_cx25840 = !0,
.default_tuner_type = TUNER_PHILIPS_FM1216ME_MK3,
.flag_has_analogtuner = !0,
.flag_has_fmradio = !0,
.flag_has_composite = !0,
.flag_has_svideo = !0,
.signal_routing_scheme = PVR2_ROUTING_SCHEME_GOTVIEW,
};
/*------------------------------------------------------------------------*/
/* GOTVIEW USB2.0 DVD Deluxe */
/* (same module list as gotview_2) */
static const struct pvr2_device_desc pvr2_device_gotview_2d = {
.description = "Gotview USB 2.0 DVD Deluxe",
.shortname = "gv2d",
.client_table.lst = pvr2_cli_gotview_2,
.client_table.cnt = ARRAY_SIZE(pvr2_cli_gotview_2),
.flag_has_cx25840 = !0,
.default_tuner_type = TUNER_PHILIPS_FM1216ME_MK3,
.flag_has_analogtuner = !0,
.flag_has_composite = !0,
.flag_has_svideo = !0,
.signal_routing_scheme = PVR2_ROUTING_SCHEME_GOTVIEW,
};
/*------------------------------------------------------------------------*/
/* Terratec Grabster AV400 */
static const struct pvr2_device_client_desc pvr2_cli_av400[] = {
{ .module_id = PVR2_CLIENT_ID_CX25840 },
};
static const struct pvr2_device_desc pvr2_device_av400 = {
.description = "Terratec Grabster AV400",
.shortname = "av400",
.flag_is_experimental = 1,
.client_table.lst = pvr2_cli_av400,
.client_table.cnt = ARRAY_SIZE(pvr2_cli_av400),
.flag_has_cx25840 = !0,
.flag_has_analogtuner = 0,
.flag_has_composite = !0,
.flag_has_svideo = !0,
.signal_routing_scheme = PVR2_ROUTING_SCHEME_AV400,
};
/*------------------------------------------------------------------------*/
/* OnAir Creator */
#ifdef CONFIG_VIDEO_PVRUSB2_DVB
static struct lgdt330x_config pvr2_lgdt3303_config = {
.demod_chip = LGDT3303,
.clock_polarity_flip = 1,
};
static int pvr2_lgdt3303_attach(struct pvr2_dvb_adapter *adap)
{
adap->fe[0] = dvb_attach(lgdt330x_attach, &pvr2_lgdt3303_config,
0x0e,
&adap->channel.hdw->i2c_adap);
if (adap->fe[0])
return 0;
return -EIO;
}
static int pvr2_lgh06xf_attach(struct pvr2_dvb_adapter *adap)
{
dvb_attach(simple_tuner_attach, adap->fe[0],
&adap->channel.hdw->i2c_adap, 0x61,
TUNER_LG_TDVS_H06XF);
return 0;
}
static const struct pvr2_dvb_props pvr2_onair_creator_fe_props = {
.frontend_attach = pvr2_lgdt3303_attach,
.tuner_attach = pvr2_lgh06xf_attach,
};
#endif
static const struct pvr2_device_client_desc pvr2_cli_onair_creator[] = {
{ .module_id = PVR2_CLIENT_ID_SAA7115 },
{ .module_id = PVR2_CLIENT_ID_CS53L32A },
{ .module_id = PVR2_CLIENT_ID_TUNER },
};
static const struct pvr2_device_desc pvr2_device_onair_creator = {
.description = "OnAir Creator Hybrid USB tuner",
.shortname = "oac",
.client_table.lst = pvr2_cli_onair_creator,
.client_table.cnt = ARRAY_SIZE(pvr2_cli_onair_creator),
.default_tuner_type = TUNER_LG_TDVS_H06XF,
.flag_has_analogtuner = !0,
.flag_has_composite = !0,
.flag_has_svideo = !0,
.flag_digital_requires_cx23416 = !0,
.signal_routing_scheme = PVR2_ROUTING_SCHEME_ONAIR,
.digital_control_scheme = PVR2_DIGITAL_SCHEME_ONAIR,
.default_std_mask = V4L2_STD_NTSC_M,
#ifdef CONFIG_VIDEO_PVRUSB2_DVB
.dvb_props = &pvr2_onair_creator_fe_props,
#endif
};
/*------------------------------------------------------------------------*/
/* OnAir USB 2.0 */
#ifdef CONFIG_VIDEO_PVRUSB2_DVB
static struct lgdt330x_config pvr2_lgdt3302_config = {
.demod_chip = LGDT3302,
};
static int pvr2_lgdt3302_attach(struct pvr2_dvb_adapter *adap)
{
adap->fe[0] = dvb_attach(lgdt330x_attach, &pvr2_lgdt3302_config,
0x0e,
&adap->channel.hdw->i2c_adap);
if (adap->fe[0])
return 0;
return -EIO;
}
static int pvr2_fcv1236d_attach(struct pvr2_dvb_adapter *adap)
{
dvb_attach(simple_tuner_attach, adap->fe[0],
&adap->channel.hdw->i2c_adap, 0x61,
TUNER_PHILIPS_FCV1236D);
return 0;
}
static const struct pvr2_dvb_props pvr2_onair_usb2_fe_props = {
.frontend_attach = pvr2_lgdt3302_attach,
.tuner_attach = pvr2_fcv1236d_attach,
};
#endif
static const struct pvr2_device_client_desc pvr2_cli_onair_usb2[] = {
{ .module_id = PVR2_CLIENT_ID_SAA7115 },
{ .module_id = PVR2_CLIENT_ID_CS53L32A },
{ .module_id = PVR2_CLIENT_ID_TUNER },
};
static const struct pvr2_device_desc pvr2_device_onair_usb2 = {
.description = "OnAir USB2 Hybrid USB tuner",
.shortname = "oa2",
.client_table.lst = pvr2_cli_onair_usb2,
.client_table.cnt = ARRAY_SIZE(pvr2_cli_onair_usb2),
.default_tuner_type = TUNER_PHILIPS_FCV1236D,
.flag_has_analogtuner = !0,
.flag_has_composite = !0,
.flag_has_svideo = !0,
.flag_digital_requires_cx23416 = !0,
.signal_routing_scheme = PVR2_ROUTING_SCHEME_ONAIR,
.digital_control_scheme = PVR2_DIGITAL_SCHEME_ONAIR,
.default_std_mask = V4L2_STD_NTSC_M,
#ifdef CONFIG_VIDEO_PVRUSB2_DVB
.dvb_props = &pvr2_onair_usb2_fe_props,
#endif
};
/*------------------------------------------------------------------------*/
/* Hauppauge PVR-USB2 Model 73xxx */
#ifdef CONFIG_VIDEO_PVRUSB2_DVB
static struct tda10048_config hauppauge_tda10048_config = {
.demod_address = 0x10 >> 1,
.output_mode = TDA10048_PARALLEL_OUTPUT,
.fwbulkwritelen = TDA10048_BULKWRITE_50,
.inversion = TDA10048_INVERSION_ON,
.dtv6_if_freq_khz = TDA10048_IF_3300,
.dtv7_if_freq_khz = TDA10048_IF_3800,
.dtv8_if_freq_khz = TDA10048_IF_4300,
.clk_freq_khz = TDA10048_CLK_16000,
.disable_gate_access = 1,
};
static struct tda829x_config tda829x_no_probe = {
.probe_tuner = TDA829X_DONT_PROBE,
};
static struct tda18271_std_map hauppauge_tda18271_dvbt_std_map = {
.dvbt_6 = { .if_freq = 3300, .agc_mode = 3, .std = 4,
.if_lvl = 1, .rfagc_top = 0x37, },
.dvbt_7 = { .if_freq = 3800, .agc_mode = 3, .std = 5,
.if_lvl = 1, .rfagc_top = 0x37, },
.dvbt_8 = { .if_freq = 4300, .agc_mode = 3, .std = 6,
.if_lvl = 1, .rfagc_top = 0x37, },
};
static struct tda18271_config hauppauge_tda18271_dvb_config = {
.std_map = &hauppauge_tda18271_dvbt_std_map,
.gate = TDA18271_GATE_ANALOG,
.output_opt = TDA18271_OUTPUT_LT_OFF,
};
static int pvr2_tda10048_attach(struct pvr2_dvb_adapter *adap)
{
adap->fe[0] = dvb_attach(tda10048_attach, &hauppauge_tda10048_config,
&adap->channel.hdw->i2c_adap);
if (adap->fe[0])
return 0;
return -EIO;
}
static int pvr2_73xxx_tda18271_8295_attach(struct pvr2_dvb_adapter *adap)
{
dvb_attach(tda829x_attach, adap->fe[0],
&adap->channel.hdw->i2c_adap, 0x42,
&tda829x_no_probe);
dvb_attach(tda18271_attach, adap->fe[0], 0x60,
&adap->channel.hdw->i2c_adap,
&hauppauge_tda18271_dvb_config);
return 0;
}
static const struct pvr2_dvb_props pvr2_73xxx_dvb_props = {
.frontend_attach = pvr2_tda10048_attach,
.tuner_attach = pvr2_73xxx_tda18271_8295_attach,
};
#endif
static const struct pvr2_device_client_desc pvr2_cli_73xxx[] = {
{ .module_id = PVR2_CLIENT_ID_CX25840 },
{ .module_id = PVR2_CLIENT_ID_TUNER,
.i2c_address_list = "\x42"},
};
#define PVR2_FIRMWARE_73xxx "v4l-pvrusb2-73xxx-01.fw"
static const char *pvr2_fw1_names_73xxx[] = {
PVR2_FIRMWARE_73xxx,
};
static const struct pvr2_device_desc pvr2_device_73xxx = {
.description = "WinTV HVR-1900 Model 73xxx",
.shortname = "73xxx",
.client_table.lst = pvr2_cli_73xxx,
.client_table.cnt = ARRAY_SIZE(pvr2_cli_73xxx),
.fx2_firmware.lst = pvr2_fw1_names_73xxx,
.fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_73xxx),
.flag_has_cx25840 = !0,
.flag_has_hauppauge_rom = !0,
.flag_has_analogtuner = !0,
.flag_has_composite = !0,
.flag_has_svideo = !0,
.flag_fx2_16kb = !0,
.signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE,
.digital_control_scheme = PVR2_DIGITAL_SCHEME_HAUPPAUGE,
.led_scheme = PVR2_LED_SCHEME_HAUPPAUGE,
.ir_scheme = PVR2_IR_SCHEME_ZILOG,
#ifdef CONFIG_VIDEO_PVRUSB2_DVB
.dvb_props = &pvr2_73xxx_dvb_props,
#endif
};
/*------------------------------------------------------------------------*/
/* Hauppauge PVR-USB2 Model 75xxx */
#ifdef CONFIG_VIDEO_PVRUSB2_DVB
static struct s5h1409_config pvr2_s5h1409_config = {
.demod_address = 0x32 >> 1,
.output_mode = S5H1409_PARALLEL_OUTPUT,
.gpio = S5H1409_GPIO_OFF,
.qam_if = 4000,
.inversion = S5H1409_INVERSION_ON,
.status_mode = S5H1409_DEMODLOCKING,
};
static struct s5h1411_config pvr2_s5h1411_config = {
.output_mode = S5H1411_PARALLEL_OUTPUT,
.gpio = S5H1411_GPIO_OFF,
.vsb_if = S5H1411_IF_44000,
.qam_if = S5H1411_IF_4000,
.inversion = S5H1411_INVERSION_ON,
.status_mode = S5H1411_DEMODLOCKING,
};
static struct tda18271_std_map hauppauge_tda18271_std_map = {
.atsc_6 = { .if_freq = 5380, .agc_mode = 3, .std = 3,
.if_lvl = 6, .rfagc_top = 0x37, },
.qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 0,
.if_lvl = 6, .rfagc_top = 0x37, },
};
static struct tda18271_config hauppauge_tda18271_config = {
.std_map = &hauppauge_tda18271_std_map,
.gate = TDA18271_GATE_ANALOG,
.output_opt = TDA18271_OUTPUT_LT_OFF,
};
static int pvr2_s5h1409_attach(struct pvr2_dvb_adapter *adap)
{
adap->fe[0] = dvb_attach(s5h1409_attach, &pvr2_s5h1409_config,
&adap->channel.hdw->i2c_adap);
if (adap->fe[0])
return 0;
return -EIO;
}
static int pvr2_s5h1411_attach(struct pvr2_dvb_adapter *adap)
{
adap->fe[0] = dvb_attach(s5h1411_attach, &pvr2_s5h1411_config,
&adap->channel.hdw->i2c_adap);
if (adap->fe[0])
return 0;
return -EIO;
}
static int pvr2_tda18271_8295_attach(struct pvr2_dvb_adapter *adap)
{
dvb_attach(tda829x_attach, adap->fe[0],
&adap->channel.hdw->i2c_adap, 0x42,
&tda829x_no_probe);
dvb_attach(tda18271_attach, adap->fe[0], 0x60,
&adap->channel.hdw->i2c_adap,
&hauppauge_tda18271_config);
return 0;
}
static const struct pvr2_dvb_props pvr2_750xx_dvb_props = {
.frontend_attach = pvr2_s5h1409_attach,
.tuner_attach = pvr2_tda18271_8295_attach,
};
static const struct pvr2_dvb_props pvr2_751xx_dvb_props = {
.frontend_attach = pvr2_s5h1411_attach,
.tuner_attach = pvr2_tda18271_8295_attach,
};
#endif
#define PVR2_FIRMWARE_75xxx "v4l-pvrusb2-73xxx-01.fw"
static const char *pvr2_fw1_names_75xxx[] = {
PVR2_FIRMWARE_75xxx,
};
static const struct pvr2_device_desc pvr2_device_750xx = {
.description = "WinTV HVR-1950 Model 750xx",
.shortname = "750xx",
.client_table.lst = pvr2_cli_73xxx,
.client_table.cnt = ARRAY_SIZE(pvr2_cli_73xxx),
.fx2_firmware.lst = pvr2_fw1_names_75xxx,
.fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_75xxx),
.flag_has_cx25840 = !0,
.flag_has_hauppauge_rom = !0,
.flag_has_analogtuner = !0,
.flag_has_composite = !0,
.flag_has_svideo = !0,
.flag_fx2_16kb = !0,
.signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE,
.digital_control_scheme = PVR2_DIGITAL_SCHEME_HAUPPAUGE,
.default_std_mask = V4L2_STD_NTSC_M,
.led_scheme = PVR2_LED_SCHEME_HAUPPAUGE,
.ir_scheme = PVR2_IR_SCHEME_ZILOG,
#ifdef CONFIG_VIDEO_PVRUSB2_DVB
.dvb_props = &pvr2_750xx_dvb_props,
#endif
};
static const struct pvr2_device_desc pvr2_device_751xx = {
.description = "WinTV HVR-1950 Model 751xx",
.shortname = "751xx",
.client_table.lst = pvr2_cli_73xxx,
.client_table.cnt = ARRAY_SIZE(pvr2_cli_73xxx),
.fx2_firmware.lst = pvr2_fw1_names_75xxx,
.fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_75xxx),
.flag_has_cx25840 = !0,
.flag_has_hauppauge_rom = !0,
.flag_has_analogtuner = !0,
.flag_has_composite = !0,
.flag_has_svideo = !0,
.flag_fx2_16kb = !0,
.signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE,
.digital_control_scheme = PVR2_DIGITAL_SCHEME_HAUPPAUGE,
.default_std_mask = V4L2_STD_NTSC_M,
.led_scheme = PVR2_LED_SCHEME_HAUPPAUGE,
.ir_scheme = PVR2_IR_SCHEME_ZILOG,
#ifdef CONFIG_VIDEO_PVRUSB2_DVB
.dvb_props = &pvr2_751xx_dvb_props,
#endif
};
/*------------------------------------------------------------------------*/
/* Hauppauge PVR-USB2 Model 160000 / 160111 -- HVR-1955 / HVR-1975 */
#ifdef CONFIG_VIDEO_PVRUSB2_DVB
static int pvr2_si2157_attach(struct pvr2_dvb_adapter *adap);
static int pvr2_si2168_attach(struct pvr2_dvb_adapter *adap);
static int pvr2_dual_fe_attach(struct pvr2_dvb_adapter *adap);
static int pvr2_lgdt3306a_attach(struct pvr2_dvb_adapter *adap);
static const struct pvr2_dvb_props pvr2_160000_dvb_props = {
.frontend_attach = pvr2_dual_fe_attach,
.tuner_attach = pvr2_si2157_attach,
};
static const struct pvr2_dvb_props pvr2_160111_dvb_props = {
.frontend_attach = pvr2_lgdt3306a_attach,
.tuner_attach = pvr2_si2157_attach,
};
static int pvr2_si2157_attach(struct pvr2_dvb_adapter *adap)
{
struct si2157_config si2157_config = {};
si2157_config.inversion = 1;
si2157_config.fe = adap->fe[0];
adap->i2c_client_tuner = dvb_module_probe("si2157", "si2177",
&adap->channel.hdw->i2c_adap,
0x60, &si2157_config);
if (!adap->i2c_client_tuner)
return -ENODEV;
return 0;
}
static int pvr2_si2168_attach(struct pvr2_dvb_adapter *adap)
{
struct si2168_config si2168_config = {};
struct i2c_adapter *adapter;
pr_debug("%s()\n", __func__);
si2168_config.fe = &adap->fe[1];
si2168_config.i2c_adapter = &adapter;
si2168_config.ts_mode = SI2168_TS_PARALLEL; /*2, 1-serial, 2-parallel.*/
si2168_config.ts_clock_gapped = 1; /*0-disabled, 1-enabled.*/
si2168_config.ts_clock_inv = 0; /*0-not-invert, 1-invert*/
si2168_config.spectral_inversion = 1; /*0-not-invert, 1-invert*/
adap->i2c_client_demod[1] = dvb_module_probe("si2168", NULL,
&adap->channel.hdw->i2c_adap,
0x64, &si2168_config);
if (!adap->i2c_client_demod[1])
return -ENODEV;
return 0;
}
static int pvr2_lgdt3306a_attach(struct pvr2_dvb_adapter *adap)
{
struct lgdt3306a_config lgdt3306a_config;
struct i2c_adapter *adapter;
pr_debug("%s()\n", __func__);
lgdt3306a_config.fe = &adap->fe[0];
lgdt3306a_config.i2c_adapter = &adapter;
lgdt3306a_config.deny_i2c_rptr = 1;
lgdt3306a_config.spectral_inversion = 1;
lgdt3306a_config.qam_if_khz = 4000;
lgdt3306a_config.vsb_if_khz = 3250;
lgdt3306a_config.mpeg_mode = LGDT3306A_MPEG_PARALLEL;
lgdt3306a_config.tpclk_edge = LGDT3306A_TPCLK_FALLING_EDGE;
lgdt3306a_config.tpvalid_polarity = LGDT3306A_TP_VALID_LOW;
lgdt3306a_config.xtalMHz = 25; /* demod clock MHz; 24/25 supported */
adap->i2c_client_demod[0] = dvb_module_probe("lgdt3306a", NULL,
&adap->channel.hdw->i2c_adap,
0x59, &lgdt3306a_config);
if (!adap->i2c_client_demod[0])
return -ENODEV;
return 0;
}
static int pvr2_dual_fe_attach(struct pvr2_dvb_adapter *adap)
{
pr_debug("%s()\n", __func__);
if (pvr2_lgdt3306a_attach(adap) != 0)
return -ENODEV;
if (pvr2_si2168_attach(adap) != 0) {
dvb_module_release(adap->i2c_client_demod[0]);
return -ENODEV;
}
return 0;
}
#endif
#define PVR2_FIRMWARE_160xxx "v4l-pvrusb2-160xxx-01.fw"
static const char *pvr2_fw1_names_160xxx[] = {
PVR2_FIRMWARE_160xxx,
};
static const struct pvr2_device_client_desc pvr2_cli_160xxx[] = {
{ .module_id = PVR2_CLIENT_ID_CX25840 },
};
static const struct pvr2_device_desc pvr2_device_160000 = {
.description = "WinTV HVR-1975 Model 160000",
.shortname = "160000",
.client_table.lst = pvr2_cli_160xxx,
.client_table.cnt = ARRAY_SIZE(pvr2_cli_160xxx),
.fx2_firmware.lst = pvr2_fw1_names_160xxx,
.fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_160xxx),
.default_tuner_type = TUNER_ABSENT,
.flag_has_cx25840 = 1,
.flag_has_hauppauge_rom = 1,
.flag_has_analogtuner = 1,
.flag_has_composite = 1,
.flag_has_svideo = 1,
.flag_fx2_16kb = 1,
.signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE,
.digital_control_scheme = PVR2_DIGITAL_SCHEME_HAUPPAUGE,
.default_std_mask = V4L2_STD_NTSC_M,
.led_scheme = PVR2_LED_SCHEME_HAUPPAUGE,
.ir_scheme = PVR2_IR_SCHEME_ZILOG,
#ifdef CONFIG_VIDEO_PVRUSB2_DVB
.dvb_props = &pvr2_160000_dvb_props,
#endif
};
static const struct pvr2_device_desc pvr2_device_160111 = {
.description = "WinTV HVR-1955 Model 160111",
.shortname = "160111",
.client_table.lst = pvr2_cli_160xxx,
.client_table.cnt = ARRAY_SIZE(pvr2_cli_160xxx),
.fx2_firmware.lst = pvr2_fw1_names_160xxx,
.fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_160xxx),
.default_tuner_type = TUNER_ABSENT,
.flag_has_cx25840 = 1,
.flag_has_hauppauge_rom = 1,
.flag_has_analogtuner = 1,
.flag_has_composite = 1,
.flag_has_svideo = 1,
.flag_fx2_16kb = 1,
.signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE,
.digital_control_scheme = PVR2_DIGITAL_SCHEME_HAUPPAUGE,
.default_std_mask = V4L2_STD_NTSC_M,
.led_scheme = PVR2_LED_SCHEME_HAUPPAUGE,
.ir_scheme = PVR2_IR_SCHEME_ZILOG,
#ifdef CONFIG_VIDEO_PVRUSB2_DVB
.dvb_props = &pvr2_160111_dvb_props,
#endif
};
/*------------------------------------------------------------------------*/
struct usb_device_id pvr2_device_table[] = {
{ USB_DEVICE(0x2040, 0x2900),
.driver_info = (kernel_ulong_t)&pvr2_device_29xxx},
{ USB_DEVICE(0x2040, 0x2950), /* Logically identical to 2900 */
.driver_info = (kernel_ulong_t)&pvr2_device_29xxx},
{ USB_DEVICE(0x2040, 0x2400),
.driver_info = (kernel_ulong_t)&pvr2_device_24xxx},
{ USB_DEVICE(0x1164, 0x0622),
.driver_info = (kernel_ulong_t)&pvr2_device_gotview_2},
{ USB_DEVICE(0x1164, 0x0602),
.driver_info = (kernel_ulong_t)&pvr2_device_gotview_2d},
{ USB_DEVICE(0x11ba, 0x1003),
.driver_info = (kernel_ulong_t)&pvr2_device_onair_creator},
{ USB_DEVICE(0x11ba, 0x1001),
.driver_info = (kernel_ulong_t)&pvr2_device_onair_usb2},
{ USB_DEVICE(0x2040, 0x7300),
.driver_info = (kernel_ulong_t)&pvr2_device_73xxx},
{ USB_DEVICE(0x2040, 0x7500),
.driver_info = (kernel_ulong_t)&pvr2_device_750xx},
{ USB_DEVICE(0x2040, 0x7501),
.driver_info = (kernel_ulong_t)&pvr2_device_751xx},
{ USB_DEVICE(0x0ccd, 0x0039),
.driver_info = (kernel_ulong_t)&pvr2_device_av400},
{ USB_DEVICE(0x2040, 0x7502),
.driver_info = (kernel_ulong_t)&pvr2_device_160111},
{ USB_DEVICE(0x2040, 0x7510),
.driver_info = (kernel_ulong_t)&pvr2_device_160000},
{ }
};
MODULE_DEVICE_TABLE(usb, pvr2_device_table);
MODULE_FIRMWARE(PVR2_FIRMWARE_29xxx);
MODULE_FIRMWARE(PVR2_FIRMWARE_24xxx);
MODULE_FIRMWARE(PVR2_FIRMWARE_73xxx);
MODULE_FIRMWARE(PVR2_FIRMWARE_75xxx);
Reference in New Issue View Git Blame Copy Permalink