linux/drivers/bcma
Hauke Mehrtens ed96c03ec0 bcma: add PCI ID for spromless BCM43217
This adds the PCI ID a BCM43217 without a sprom.
This devices was found on a Netgear R6250 attached to a BCM4708 ARM SoC.

bcma: bus1: Found chip with id 0xA8D1, rev 0x00 and package 0x08
bcma: bus1: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x27, class 0x0)
bcma: bus1: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x1E, class 0x0)
bcma: bus1: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x14, class 0x0)

b43-phy0: Broadcom 43217 WLAN found (core revision 30)
b43-phy0: Found PHY: Analog 9, Type 4 (N), Revision 17
b43-phy0: Found Radio: Manuf 0x17F, ID 0x2057, Revision 14, Version 1

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-25 15:39:23 -04:00
..
bcma_private.h bcma: export bcma_find_core_unit() 2014-01-04 20:25:19 -05:00
core.c bcma: update core (en|dis)abling functions 2013-06-17 14:38:53 -04:00
driver_chipcommon_nflash.c Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless 2013-02-14 14:23:33 -05:00
driver_chipcommon_pmu.c bcma: add support for BCM43131 that was found in Tenda W311E 2014-07-29 10:32:57 -04:00
driver_chipcommon_sflash.c bcma: fix sparse warnings in driver_chipcommon_sflash.c 2014-01-03 15:37:01 -05:00
driver_chipcommon.c bcma: add support for BCM43142 2013-06-27 13:42:16 -04:00
driver_gmac_cmn.c Drivers: bcma: remove __dev* attributes. 2013-01-03 15:57:15 -08:00
driver_gpio.c bcma: gpio: register all 32 GPIOs on BCM53572 2014-06-19 15:49:15 -04:00
driver_mips.c bcma_mips: add a const qualifier 2013-04-05 13:04:07 +01:00
driver_pci_host.c bcma: change max PCI read request size to 128 2013-08-26 14:09:02 -04:00
driver_pci.c bcma: make bcma_core_pci_{up,down}() callable from atomic context 2013-09-26 14:02:33 -04:00
driver_pcie2.c bcma: add driver for PCIe Gen 2 core 2014-07-07 16:32:16 -04:00
host_pci.c bcma: add PCI ID for spromless BCM43217 2014-08-25 15:39:23 -04:00
host_soc.c bcma: make some functions static 2012-08-10 15:26:52 -04:00
Kconfig bcma: gpio: add own IRQ domain 2014-01-23 13:02:37 +01:00
main.c bcma: add driver for PCIe Gen 2 core 2014-07-07 16:32:16 -04:00
Makefile bcma: add driver for PCIe Gen 2 core 2014-07-07 16:32:16 -04:00
README
scan.c bcma: use NS prefix for names of Northstar specific cores 2014-07-31 13:45:32 -04:00
scan.h bcma: fix typo - reading number of slave wrappers 2012-07-12 15:27:17 -04:00
sprom.c bcma: add support for BCM43131 that was found in Tenda W311E 2014-07-29 10:32:57 -04:00
TODO

Broadcom introduced new bus as replacement for older SSB. It is based on AMBA,
however from programming point of view there is nothing AMBA specific we use.

Standard AMBA drivers are platform specific, have hardcoded addresses and use
AMBA standard fields like CID and PID.

In case of Broadcom's cards every device consists of:
1) Broadcom specific AMBA device. It is put on AMBA bus, but can not be treated
   as standard AMBA device. Reading it's CID or PID can cause machine lockup.
2) AMBA standard devices called ports or wrappers. They have CIDs (AMBA_CID)
   and PIDs (0x103BB369), but we do not use that info for anything. One of that
   devices is used for managing Broadcom specific core.

Addresses of AMBA devices are not hardcoded in driver and have to be read from
EPROM.

In this situation we decided to introduce separated bus. It can contain up to
16 devices identified by Broadcom specific fields: manufacturer, id, revision
and class.