linux/arch/x86/pci/broadcom_bus.c
Thomas Gleixner 2874c5fd28 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30 11:26:32 -07:00

113 lines
3.1 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Read address ranges from a Broadcom CNB20LE Host Bridge
*
* Copyright (c) 2010 Ira W. Snyder <iws@ovro.caltech.edu>
*/
#include <linux/acpi.h>
#include <linux/delay.h>
#include <linux/dmi.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <asm/pci_x86.h>
#include <asm/pci-direct.h>
#include "bus_numa.h"
static void __init cnb20le_res(u8 bus, u8 slot, u8 func)
{
struct pci_root_info *info;
struct pci_root_res *root_res;
struct resource res;
u16 word1, word2;
u8 fbus, lbus;
/* read the PCI bus numbers */
fbus = read_pci_config_byte(bus, slot, func, 0x44);
lbus = read_pci_config_byte(bus, slot, func, 0x45);
info = alloc_pci_root_info(fbus, lbus, 0, 0);
/*
* Add the legacy IDE ports on bus 0
*
* These do not exist anywhere in the bridge registers, AFAICT. I do
* not have the datasheet, so this is the best I can do.
*/
if (fbus == 0) {
update_res(info, 0x01f0, 0x01f7, IORESOURCE_IO, 0);
update_res(info, 0x03f6, 0x03f6, IORESOURCE_IO, 0);
update_res(info, 0x0170, 0x0177, IORESOURCE_IO, 0);
update_res(info, 0x0376, 0x0376, IORESOURCE_IO, 0);
update_res(info, 0xffa0, 0xffaf, IORESOURCE_IO, 0);
}
/* read the non-prefetchable memory window */
word1 = read_pci_config_16(bus, slot, func, 0xc0);
word2 = read_pci_config_16(bus, slot, func, 0xc2);
if (word1 != word2) {
res.start = ((resource_size_t) word1 << 16) | 0x0000;
res.end = ((resource_size_t) word2 << 16) | 0xffff;
res.flags = IORESOURCE_MEM;
update_res(info, res.start, res.end, res.flags, 0);
}
/* read the prefetchable memory window */
word1 = read_pci_config_16(bus, slot, func, 0xc4);
word2 = read_pci_config_16(bus, slot, func, 0xc6);
if (word1 != word2) {
res.start = ((resource_size_t) word1 << 16) | 0x0000;
res.end = ((resource_size_t) word2 << 16) | 0xffff;
res.flags = IORESOURCE_MEM | IORESOURCE_PREFETCH;
update_res(info, res.start, res.end, res.flags, 0);
}
/* read the IO port window */
word1 = read_pci_config_16(bus, slot, func, 0xd0);
word2 = read_pci_config_16(bus, slot, func, 0xd2);
if (word1 != word2) {
res.start = word1;
res.end = word2;
res.flags = IORESOURCE_IO;
update_res(info, res.start, res.end, res.flags, 0);
}
/* print information about this host bridge */
res.start = fbus;
res.end = lbus;
res.flags = IORESOURCE_BUS;
printk(KERN_INFO "CNB20LE PCI Host Bridge (domain 0000 %pR)\n", &res);
list_for_each_entry(root_res, &info->resources, list)
printk(KERN_INFO "host bridge window %pR\n", &root_res->res);
}
static int __init broadcom_postcore_init(void)
{
u8 bus = 0, slot = 0;
u32 id;
u16 vendor, device;
#ifdef CONFIG_ACPI
/*
* We should get host bridge information from ACPI unless the BIOS
* doesn't support it.
*/
if (!acpi_disabled && acpi_os_get_root_pointer())
return 0;
#endif
id = read_pci_config(bus, slot, 0, PCI_VENDOR_ID);
vendor = id & 0xffff;
device = (id >> 16) & 0xffff;
if (vendor == PCI_VENDOR_ID_SERVERWORKS &&
device == PCI_DEVICE_ID_SERVERWORKS_LE) {
cnb20le_res(bus, slot, 0);
cnb20le_res(bus, slot, 1);
}
return 0;
}
postcore_initcall(broadcom_postcore_init);