linux/include/asm-mips/war.h
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00

225 lines
6.4 KiB
C

/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2002, 2004 by Ralf Baechle
*/
#ifndef _ASM_WAR_H
#define _ASM_WAR_H
#include <linux/config.h>
/*
* Another R4600 erratum. Due to the lack of errata information the exact
* technical details aren't known. I've experimentally found that disabling
* interrupts during indexed I-cache flushes seems to be sufficient to deal
* with the issue.
*
* #define R4600_V1_INDEX_ICACHEOP_WAR 1
*/
/*
* Pleasures of the R4600 V1.x. Cite from the IDT R4600 V1.7 errata:
*
* 18. The CACHE instructions Hit_Writeback_Invalidate_D, Hit_Writeback_D,
* Hit_Invalidate_D and Create_Dirty_Excl_D should only be
* executed if there is no other dcache activity. If the dcache is
* accessed for another instruction immeidately preceding when these
* cache instructions are executing, it is possible that the dcache
* tag match outputs used by these cache instructions will be
* incorrect. These cache instructions should be preceded by at least
* four instructions that are not any kind of load or store
* instruction.
*
* This is not allowed: lw
* nop
* nop
* nop
* cache Hit_Writeback_Invalidate_D
*
* This is allowed: lw
* nop
* nop
* nop
* nop
* cache Hit_Writeback_Invalidate_D
*
* #define R4600_V1_HIT_CACHEOP_WAR 1
*/
/*
* Writeback and invalidate the primary cache dcache before DMA.
*
* R4600 v2.0 bug: "The CACHE instructions Hit_Writeback_Inv_D,
* Hit_Writeback_D, Hit_Invalidate_D and Create_Dirty_Exclusive_D will only
* operate correctly if the internal data cache refill buffer is empty. These
* CACHE instructions should be separated from any potential data cache miss
* by a load instruction to an uncached address to empty the response buffer."
* (Revision 2.0 device errata from IDT available on http://www.idt.com/
* in .pdf format.)
*
* #define R4600_V2_HIT_CACHEOP_WAR 1
*/
/*
* R4600 CPU modules for the Indy come with both V1.7 and V2.0 processors.
*/
#ifdef CONFIG_SGI_IP22
#define R4600_V1_INDEX_ICACHEOP_WAR 1
#define R4600_V1_HIT_CACHEOP_WAR 1
#define R4600_V2_HIT_CACHEOP_WAR 1
#endif
/*
* But the RM200C seems to have been shipped only with V2.0 R4600s
*/
#ifdef CONFIG_SNI_RM200_PCI
#define R4600_V2_HIT_CACHEOP_WAR 1
#endif
#ifdef CONFIG_CPU_R5432
/*
* When an interrupt happens on a CP0 register read instruction, CPU may
* lock up or read corrupted values of CP0 registers after it enters
* the exception handler.
*
* This workaround makes sure that we read a "safe" CP0 register as the
* first thing in the exception handler, which breaks one of the
* pre-conditions for this problem.
*/
#define R5432_CP0_INTERRUPT_WAR 1
#endif
#if defined(CONFIG_SB1_PASS_1_WORKAROUNDS) || \
defined(CONFIG_SB1_PASS_2_WORKAROUNDS)
/*
* Workaround for the Sibyte M3 errata the text of which can be found at
*
* http://sibyte.broadcom.com/hw/bcm1250/docs/pass2errata.txt
*
* This will enable the use of a special TLB refill handler which does a
* consistency check on the information in c0_badvaddr and c0_entryhi and
* will just return and take the exception again if the information was
* found to be inconsistent.
*/
#define BCM1250_M3_WAR 1
/*
* This is a DUART workaround related to glitches around register accesses
*/
#define SIBYTE_1956_WAR 1
#endif
/*
* Fill buffers not flushed on CACHE instructions
*
* Hit_Invalidate_I cacheops invalidate an icache line but the refill
* for that line can get stale data from the fill buffer instead of
* accessing memory if the previous icache miss was also to that line.
*
* Workaround: generate an icache refill from a different line
*
* Affects:
* MIPS 4K RTL revision <3.0, PRID revision <4
*/
#if defined(CONFIG_MIPS_MALTA) || defined(CONFIG_MIPS_ATLAS) || \
defined(CONFIG_MIPS_SEAD)
#define MIPS4K_ICACHE_REFILL_WAR 1
#endif
/*
* Missing implicit forced flush of evictions caused by CACHE
* instruction
*
* Evictions caused by a CACHE instructions are not forced on to the
* bus. The BIU gives higher priority to fetches than to the data from
* the eviction buffer and no collision detection is performed between
* fetches and pending data from the eviction buffer.
*
* Workaround: Execute a SYNC instruction after the cache instruction
*
* Affects:
* MIPS 5Kc,5Kf RTL revision <2.3, PRID revision <8
* MIPS 20Kc RTL revision <4.0, PRID revision <?
*/
#if defined(CONFIG_MIPS_MALTA) || defined(CONFIG_MIPS_ATLAS) || \
defined(CONFIG_MIPS_SEAD)
#define MIPS_CACHE_SYNC_WAR 1
#endif
/*
* From TX49/H2 manual: "If the instruction (i.e. CACHE) is issued for
* the line which this instruction itself exists, the following
* operation is not guaranteed."
*
* Workaround: do two phase flushing for Index_Invalidate_I
*/
#ifdef CONFIG_CPU_TX49XX
#define TX49XX_ICACHE_INDEX_INV_WAR 1
#endif
/*
* On the RM9000 there is a problem which makes the CreateDirtyExclusive
* cache operation unusable on SMP systems.
*/
#if defined(CONFIG_MOMENCO_JAGUAR_ATX) || defined(CONFIG_PMC_YOSEMITE)
#define RM9000_CDEX_SMP_WAR 1
#endif
/*
* ON the R10000 upto version 2.6 (not sure about 2.7) there is a bug that
* may cause ll / sc and lld / scd sequences to execute non-atomically.
*/
#ifdef CONFIG_SGI_IP27
#define R10000_LLSC_WAR 1
#endif
/*
* Workarounds default to off
*/
#ifndef R4600_V1_INDEX_ICACHEOP_WAR
#define R4600_V1_INDEX_ICACHEOP_WAR 0
#endif
#ifndef R4600_V1_HIT_CACHEOP_WAR
#define R4600_V1_HIT_CACHEOP_WAR 0
#endif
#ifndef R4600_V2_HIT_CACHEOP_WAR
#define R4600_V2_HIT_CACHEOP_WAR 0
#endif
#ifndef R5432_CP0_INTERRUPT_WAR
#define R5432_CP0_INTERRUPT_WAR 0
#endif
#ifndef BCM1250_M3_WAR
#define BCM1250_M3_WAR 0
#endif
#ifndef SIBYTE_1956_WAR
#define SIBYTE_1956_WAR 0
#endif
#ifndef MIPS4K_ICACHE_REFILL_WAR
#define MIPS4K_ICACHE_REFILL_WAR 0
#endif
#ifndef MIPS_CACHE_SYNC_WAR
#define MIPS_CACHE_SYNC_WAR 0
#endif
#ifndef TX49XX_ICACHE_INDEX_INV_WAR
#define TX49XX_ICACHE_INDEX_INV_WAR 0
#endif
#ifndef RM9000_CDEX_SMP_WAR
#define RM9000_CDEX_SMP_WAR 0
#endif
#ifndef R10000_LLSC_WAR
#define R10000_LLSC_WAR 0
#endif
#endif /* _ASM_WAR_H */