linux/arch/powerpc/boot/dts
Jeremy McNicoll bfd123bf91 [POWERPC] 85xx: SBC8548 - Add flash support and HW Rev reporting
The following adds local bus, flash and MTD partition nodes for
sbc8548. As well, a compatible field for the soc node, so that
of_platform_bus_probe() will pick it up.

Something that is provided through this newly added epld node
is the Hardware Revision which is now being utilized.

Signed-off-by: Jeremy McNicoll <jeremy.mcnicoll@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-05-13 08:53:48 -05:00
..
adder875-redboot.dts [POWERPC] 8xx: Add clock-frequency to adder875 and mpc885ads dts 2008-02-05 23:33:22 -06:00
adder875-uboot.dts [POWERPC] 8xx: Add clock-frequency to adder875 and mpc885ads dts 2008-02-05 23:33:22 -06:00
bamboo.dts [POWERPC] Start removing linux,network-index in favour of aliases 2008-03-26 07:19:16 -05:00
canyonlands.dts [POWERPC] 4xx: Add NOR FLASH entries to Canyonlands and Glacier dts 2008-04-24 13:32:46 -05:00
cm5200.dts [POWERPC] mpc5200: Switch mpc5200 dts files to dts-v1 format 2008-04-29 07:19:07 -06:00
ebony.dts [POWERPC] Start removing linux,network-index in favour of aliases 2008-03-26 07:19:16 -05:00
ep88xc.dts [POWERPC] fsl: Convert dts to v1 syntax 2008-04-17 09:40:48 -05:00
ep405.dts [POWERPC] 4xx: Add aliases node to 4xx dts files 2007-12-23 13:36:30 -06:00
ep8248e.dts [POWERPC] ep8248e: Reference SMC parameter RAM base in the device tree. 2008-04-17 01:01:37 -05:00
glacier.dts [POWERPC] 4xx: Add NOR FLASH entries to Canyonlands and Glacier dts 2008-04-24 13:32:46 -05:00
haleakala.dts [POWERPC] 4xx: Change dts files to support jumbo frames 2008-04-05 09:32:37 -05:00
holly.dts [POWERPC] DTS cleanup 2007-09-14 08:53:16 -05:00
katmai.dts [POWERPC] 4xx: Change dts files to support jumbo frames 2008-04-05 09:32:37 -05:00
kilauea.dts [POWERPC] 4xx: Change dts files to support jumbo frames 2008-04-05 09:32:37 -05:00
ksi8560.dts [POWERPC] 85xx: Emerson KSI8560 device tree 2008-03-26 11:30:46 -05:00
kuroboxHD.dts [POWERPC] fsl: Convert dts to v1 syntax 2008-04-17 09:40:48 -05:00
kuroboxHG.dts [POWERPC] fsl: Convert dts to v1 syntax 2008-04-17 09:40:48 -05:00
lite5200.dts [POWERPC] mpc5200: Switch mpc5200 dts files to dts-v1 format 2008-04-29 07:19:07 -06:00
lite5200b.dts [POWERPC] mpc5200: Switch mpc5200 dts files to dts-v1 format 2008-04-29 07:19:07 -06:00
makalu.dts [POWERPC] 4xx: Change dts files to support jumbo frames 2008-04-05 09:32:37 -05:00
motionpro.dts [POWERPC] mpc5200: Switch mpc5200 dts files to dts-v1 format 2008-04-29 07:19:07 -06:00
mpc832x_mds.dts [POWERPC] QE: UCC nodes cleanup 2008-04-17 01:01:38 -05:00
mpc832x_rdb.dts [POWERPC] QE: UCC nodes cleanup 2008-04-17 01:01:38 -05:00
mpc834x_mds.dts [POWERPC] 83xx: Correct 2nd PCI controller interrupt value in mpc834x_mds dts 2008-02-05 23:29:45 -06:00
mpc836x_mds.dts [POWERPC] QE: UCC nodes cleanup 2008-04-17 01:01:38 -05:00
mpc866ads.dts [POWERPC] fsl: Convert dts to v1 syntax 2008-04-17 09:40:48 -05:00
mpc885ads.dts [POWERPC] fsl: Convert dts to v1 syntax 2008-04-17 09:40:48 -05:00
mpc5121ads.dts [POWERPC] mpc512x: Device tree for MPC5121 ADS 2008-02-06 14:05:23 -07:00
mpc7448hpc2.dts [POWERPC] fsl: Convert dts to v1 syntax 2008-04-17 09:40:48 -05:00
mpc8272ads.dts [POWERPC] fsl: Convert dts to v1 syntax 2008-04-17 09:40:48 -05:00
mpc8313erdb.dts [POWERPC] 83xx: Add rtc node to mpc8313erdb dts 2008-02-05 23:30:14 -06:00
mpc8315erdb.dts [POWERPC] 83xx: configure USB clock for MPC8315E 2008-02-05 23:19:03 -06:00
mpc8349emitx.dts [POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format. 2008-01-28 16:16:38 -06:00
mpc8349emitxgp.dts [POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format. 2008-01-28 16:16:38 -06:00
mpc8377_mds.dts [POWERPC] 83xx: Enable DMA engine on the MPC8377 MDS board. 2008-05-13 08:53:48 -05:00
mpc8377_rdb.dts [POWERPC] 83xx: Fix wrong USB phy type in mpc837xrdb dts 2008-03-31 10:23:48 -05:00
mpc8378_mds.dts [POWERPC] 83xx: Add local bus device nodes to MPC837xMDS device trees. 2008-03-07 08:42:22 -06:00
mpc8378_rdb.dts [POWERPC] 83xx: Fix wrong USB phy type in mpc837xrdb dts 2008-03-31 10:23:48 -05:00
mpc8379_mds.dts [POWERPC] sata_fsl: reduce compatibility to fsl,pq-sata 2008-03-31 10:27:35 -05:00
mpc8379_rdb.dts [POWERPC] 83xx: Fix wrong USB phy type in mpc837xrdb dts 2008-03-31 10:23:48 -05:00
mpc8540ads.dts [POWERPC] 85xx: Convert dts to v1 syntax 2008-04-17 01:28:15 -05:00
mpc8541cds.dts [POWERPC] 85xx: Convert dts to v1 syntax 2008-04-17 01:28:15 -05:00
mpc8544ds.dts [POWERPC] 85xx: minor .dts cleanups 2008-04-17 01:29:14 -05:00
mpc8548cds.dts [POWERPC] 85xx: Convert dts to v1 syntax 2008-04-17 01:28:15 -05:00
mpc8555cds.dts [POWERPC] 85xx: Convert dts to v1 syntax 2008-04-17 01:28:15 -05:00
mpc8560ads.dts [POWERPC] 85xx: Convert dts to v1 syntax 2008-04-17 01:28:15 -05:00
mpc8568mds.dts [POWERPC] 85xx: Fix the size of qe muram for MPC8568E 2008-04-17 09:52:18 -05:00
mpc8572ds.dts [POWERPC] 85xx: Convert dts to v1 syntax 2008-04-17 01:28:15 -05:00
mpc8610_hpcd.dts [POWERPC] 86xx: mpc8610_hpcd: add support for NOR and NAND flashes 2008-05-13 08:53:48 -05:00
mpc8641_hpcn.dts [RAPIDIO] Add RapidIO node into MPC8641HPCN dts file 2008-04-29 19:40:28 +10:00
pcm030.dts [POWERPC] mpc5200: add Phytec pcm030 board support 2008-04-29 07:17:12 -06:00
pq2fads.dts [POWERPC] fsl: Convert dts to v1 syntax 2008-04-17 09:40:48 -05:00
prpmc2800.dts [POWERPC] mv643xx_eth: Prepare to support multiple silicon blocks 2008-04-15 21:21:24 +10:00
ps3.dts [POWERPC] PS3: Device tree source 2007-06-28 19:18:02 +10:00
rainier.dts [POWERPC] 4xx: Change dts files to support jumbo frames 2008-04-05 09:32:37 -05:00
sbc8349.dts [POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format. 2008-01-28 16:16:38 -06:00
sbc8548.dts [POWERPC] 85xx: SBC8548 - Add flash support and HW Rev reporting 2008-05-13 08:53:48 -05:00
sbc8560.dts [POWERPC] 85xx: Add v1 device tree source for Wind River SBC8560 board 2008-01-28 08:30:47 -06:00
sbc8641d.dts [POWERPC] 86xx: Add device tree source for Wind River SBC8641D 2008-04-17 01:01:41 -05:00
sequoia.dts [POWERPC] 4xx: Fix PCI mem in sequoia DTS 2008-05-06 12:37:15 -05:00
storcenter.dts [POWERPC] Fix storcenter DTS typos, feedback, IRQs. 2008-02-05 23:33:46 -06:00
stx_gp3_8560.dts [POWERPC] 85xx: some minor cleanups for stx_gp3 and tqm85xx 2008-01-28 08:32:53 -06:00
taishan.dts [POWERPC] 4xx: Change dts files to support jumbo frames 2008-04-05 09:32:37 -05:00
tqm5200.dts [POWERPC] mpc5200: Switch mpc5200 dts files to dts-v1 format 2008-04-29 07:19:07 -06:00
tqm8540.dts [POWERPC] 85xx: some minor cleanups for stx_gp3 and tqm85xx 2008-01-28 08:32:53 -06:00
tqm8541.dts [POWERPC] 85xx: some minor cleanups for stx_gp3 and tqm85xx 2008-01-28 08:32:53 -06:00
tqm8555.dts [POWERPC] 85xx: some minor cleanups for stx_gp3 and tqm85xx 2008-01-28 08:32:53 -06:00
tqm8560.dts [POWERPC] 85xx: some minor cleanups for stx_gp3 and tqm85xx 2008-01-28 08:32:53 -06:00
walnut.dts [POWERPC] Start removing linux,network-index in favour of aliases 2008-03-26 07:19:16 -05:00
warp.dts [POWERPC] Start removing linux,network-index in favour of aliases 2008-03-26 07:19:16 -05:00
yosemite.dts [POWERPC] 4xx: Add AMCC 440EP Yosemite DTS 2008-03-26 07:19:17 -05:00