linux/arch/cris/mm/fault.c
Johannes Weiner 759496ba64 arch: mm: pass userspace fault flag to generic fault handler
Unlike global OOM handling, memory cgroup code will invoke the OOM killer
in any OOM situation because it has no way of telling faults occuring in
kernel context - which could be handled more gracefully - from
user-triggered faults.

Pass a flag that identifies faults originating in user space from the
architecture-specific fault handlers to generic code so that memcg OOM
handling can be improved.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: azurIt <azurit@pobox.sk>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12 15:38:01 -07:00

385 lines
9.2 KiB
C

/*
* arch/cris/mm/fault.c
*
* Copyright (C) 2000-2010 Axis Communications AB
*/
#include <linux/mm.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/wait.h>
#include <asm/uaccess.h>
#include <arch/system.h>
extern int find_fixup_code(struct pt_regs *);
extern void die_if_kernel(const char *, struct pt_regs *, long);
extern void show_registers(struct pt_regs *regs);
/* debug of low-level TLB reload */
#undef DEBUG
#ifdef DEBUG
#define D(x) x
#else
#define D(x)
#endif
/* debug of higher-level faults */
#define DPG(x)
/* current active page directory */
DEFINE_PER_CPU(pgd_t *, current_pgd);
unsigned long cris_signal_return_page;
/*
* This routine handles page faults. It determines the address,
* and the problem, and then passes it off to one of the appropriate
* routines.
*
* Notice that the address we're given is aligned to the page the fault
* occurred in, since we only get the PFN in R_MMU_CAUSE not the complete
* address.
*
* error_code:
* bit 0 == 0 means no page found, 1 means protection fault
* bit 1 == 0 means read, 1 means write
*
* If this routine detects a bad access, it returns 1, otherwise it
* returns 0.
*/
asmlinkage void
do_page_fault(unsigned long address, struct pt_regs *regs,
int protection, int writeaccess)
{
struct task_struct *tsk;
struct mm_struct *mm;
struct vm_area_struct * vma;
siginfo_t info;
int fault;
unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE;
D(printk(KERN_DEBUG
"Page fault for %lX on %X at %lX, prot %d write %d\n",
address, smp_processor_id(), instruction_pointer(regs),
protection, writeaccess));
tsk = current;
/*
* We fault-in kernel-space virtual memory on-demand. The
* 'reference' page table is init_mm.pgd.
*
* NOTE! We MUST NOT take any locks for this case. We may
* be in an interrupt or a critical region, and should
* only copy the information from the master page table,
* nothing more.
*
* NOTE2: This is done so that, when updating the vmalloc
* mappings we don't have to walk all processes pgdirs and
* add the high mappings all at once. Instead we do it as they
* are used. However vmalloc'ed page entries have the PAGE_GLOBAL
* bit set so sometimes the TLB can use a lingering entry.
*
* This verifies that the fault happens in kernel space
* and that the fault was not a protection error (error_code & 1).
*/
if (address >= VMALLOC_START &&
!protection &&
!user_mode(regs))
goto vmalloc_fault;
/* When stack execution is not allowed we store the signal
* trampolines in the reserved cris_signal_return_page.
* Handle this in the exact same way as vmalloc (we know
* that the mapping is there and is valid so no need to
* call handle_mm_fault).
*/
if (cris_signal_return_page &&
address == cris_signal_return_page &&
!protection && user_mode(regs))
goto vmalloc_fault;
/* we can and should enable interrupts at this point */
local_irq_enable();
mm = tsk->mm;
info.si_code = SEGV_MAPERR;
/*
* If we're in an interrupt or "atomic" operation or have no
* user context, we must not take the fault.
*/
if (in_atomic() || !mm)
goto no_context;
if (user_mode(regs))
flags |= FAULT_FLAG_USER;
retry:
down_read(&mm->mmap_sem);
vma = find_vma(mm, address);
if (!vma)
goto bad_area;
if (vma->vm_start <= address)
goto good_area;
if (!(vma->vm_flags & VM_GROWSDOWN))
goto bad_area;
if (user_mode(regs)) {
/*
* accessing the stack below usp is always a bug.
* we get page-aligned addresses so we can only check
* if we're within a page from usp, but that might be
* enough to catch brutal errors at least.
*/
if (address + PAGE_SIZE < rdusp())
goto bad_area;
}
if (expand_stack(vma, address))
goto bad_area;
/*
* Ok, we have a good vm_area for this memory access, so
* we can handle it..
*/
good_area:
info.si_code = SEGV_ACCERR;
/* first do some preliminary protection checks */
if (writeaccess == 2){
if (!(vma->vm_flags & VM_EXEC))
goto bad_area;
} else if (writeaccess == 1) {
if (!(vma->vm_flags & VM_WRITE))
goto bad_area;
flags |= FAULT_FLAG_WRITE;
} else {
if (!(vma->vm_flags & (VM_READ | VM_EXEC)))
goto bad_area;
}
/*
* If for any reason at all we couldn't handle the fault,
* make sure we exit gracefully rather than endlessly redo
* the fault.
*/
fault = handle_mm_fault(mm, vma, address, flags);
if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current))
return;
if (unlikely(fault & VM_FAULT_ERROR)) {
if (fault & VM_FAULT_OOM)
goto out_of_memory;
else if (fault & VM_FAULT_SIGBUS)
goto do_sigbus;
BUG();
}
if (flags & FAULT_FLAG_ALLOW_RETRY) {
if (fault & VM_FAULT_MAJOR)
tsk->maj_flt++;
else
tsk->min_flt++;
if (fault & VM_FAULT_RETRY) {
flags &= ~FAULT_FLAG_ALLOW_RETRY;
flags |= FAULT_FLAG_TRIED;
/*
* No need to up_read(&mm->mmap_sem) as we would
* have already released it in __lock_page_or_retry
* in mm/filemap.c.
*/
goto retry;
}
}
up_read(&mm->mmap_sem);
return;
/*
* Something tried to access memory that isn't in our memory map..
* Fix it, but check if it's kernel or user first..
*/
bad_area:
up_read(&mm->mmap_sem);
bad_area_nosemaphore:
DPG(show_registers(regs));
/* User mode accesses just cause a SIGSEGV */
if (user_mode(regs)) {
printk(KERN_NOTICE "%s (pid %d) segfaults for page "
"address %08lx at pc %08lx\n",
tsk->comm, tsk->pid,
address, instruction_pointer(regs));
/* With DPG on, we've already dumped registers above. */
DPG(if (0))
show_registers(regs);
#ifdef CONFIG_NO_SEGFAULT_TERMINATION
DECLARE_WAIT_QUEUE_HEAD(wq);
wait_event_interruptible(wq, 0 == 1);
#else
info.si_signo = SIGSEGV;
info.si_errno = 0;
/* info.si_code has been set above */
info.si_addr = (void *)address;
force_sig_info(SIGSEGV, &info, tsk);
#endif
return;
}
no_context:
/* Are we prepared to handle this kernel fault?
*
* (The kernel has valid exception-points in the source
* when it accesses user-memory. When it fails in one
* of those points, we find it in a table and do a jump
* to some fixup code that loads an appropriate error
* code)
*/
if (find_fixup_code(regs))
return;
/*
* Oops. The kernel tried to access some bad page. We'll have to
* terminate things with extreme prejudice.
*/
if (!oops_in_progress) {
oops_in_progress = 1;
if ((unsigned long) (address) < PAGE_SIZE)
printk(KERN_ALERT "Unable to handle kernel NULL "
"pointer dereference");
else
printk(KERN_ALERT "Unable to handle kernel access"
" at virtual address %08lx\n", address);
die_if_kernel("Oops", regs, (writeaccess << 1) | protection);
oops_in_progress = 0;
}
do_exit(SIGKILL);
/*
* We ran out of memory, or some other thing happened to us that made
* us unable to handle the page fault gracefully.
*/
out_of_memory:
up_read(&mm->mmap_sem);
if (!user_mode(regs))
goto no_context;
pagefault_out_of_memory();
return;
do_sigbus:
up_read(&mm->mmap_sem);
/*
* Send a sigbus, regardless of whether we were in kernel
* or user mode.
*/
info.si_signo = SIGBUS;
info.si_errno = 0;
info.si_code = BUS_ADRERR;
info.si_addr = (void *)address;
force_sig_info(SIGBUS, &info, tsk);
/* Kernel mode? Handle exceptions or die */
if (!user_mode(regs))
goto no_context;
return;
vmalloc_fault:
{
/*
* Synchronize this task's top level page-table
* with the 'reference' page table.
*
* Use current_pgd instead of tsk->active_mm->pgd
* since the latter might be unavailable if this
* code is executed in a misfortunately run irq
* (like inside schedule() between switch_mm and
* switch_to...).
*/
int offset = pgd_index(address);
pgd_t *pgd, *pgd_k;
pud_t *pud, *pud_k;
pmd_t *pmd, *pmd_k;
pte_t *pte_k;
pgd = (pgd_t *)per_cpu(current_pgd, smp_processor_id()) + offset;
pgd_k = init_mm.pgd + offset;
/* Since we're two-level, we don't need to do both
* set_pgd and set_pmd (they do the same thing). If
* we go three-level at some point, do the right thing
* with pgd_present and set_pgd here.
*
* Also, since the vmalloc area is global, we don't
* need to copy individual PTE's, it is enough to
* copy the pgd pointer into the pte page of the
* root task. If that is there, we'll find our pte if
* it exists.
*/
pud = pud_offset(pgd, address);
pud_k = pud_offset(pgd_k, address);
if (!pud_present(*pud_k))
goto no_context;
pmd = pmd_offset(pud, address);
pmd_k = pmd_offset(pud_k, address);
if (!pmd_present(*pmd_k))
goto bad_area_nosemaphore;
set_pmd(pmd, *pmd_k);
/* Make sure the actual PTE exists as well to
* catch kernel vmalloc-area accesses to non-mapped
* addresses. If we don't do this, this will just
* silently loop forever.
*/
pte_k = pte_offset_kernel(pmd_k, address);
if (!pte_present(*pte_k))
goto no_context;
return;
}
}
/* Find fixup code. */
int
find_fixup_code(struct pt_regs *regs)
{
const struct exception_table_entry *fixup;
/* in case of delay slot fault (v32) */
unsigned long ip = (instruction_pointer(regs) & ~0x1);
fixup = search_exception_tables(ip);
if (fixup != 0) {
/* Adjust the instruction pointer in the stackframe. */
instruction_pointer(regs) = fixup->fixup;
arch_fixup(regs);
return 1;
}
return 0;
}