Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-15 00:21:59 +00:00
Code Issues Packages Projects Releases Wiki Activity
bd8fedd045
linux/drivers/pci/setup-bus.c
Chris Wright 6faf17f6f1 PCI SR-IOV: correct broken resource alignment calculations 
An SR-IOV capable device includes an SR-IOV PCIe capability which
describes the Virtual Function (VF) BAR requirements.  A typical SR-IOV
device can support multiple VFs whose BARs must be in a contiguous region,
effectively an array of VF BARs.  The BAR reports the size requirement
for a single VF.  We calculate the full range needed by simply multiplying
the VF BAR size with the number of possible VFs and create a resource
spanning the full range.

This all seems sane enough except it artificially inflates the alignment
requirement for the VF BAR.  The VF BAR need only be aligned to the size
of a single BAR not the contiguous range of VF BARs.  This can cause us
to fail to allocate resources for the BAR despite the fact that we
actually have enough space.

This patch adds a thin PCI specific layer over the generic
resource_alignment() function which is aware of the special nature of
VF BARs and does sorting and allocation based on the smaller alignment
requirement.

I recognize that while resource_alignment is generic, it's basically a
PCI helper.  An alternative to this patch is to add PCI VF BAR specific
information to struct resource.  I opted for the extra layer rather than
adding such PCI specific information to struct resource.  This does
have the slight downside that we don't cache the BAR size and re-read
for each alignment query (happens a small handful of times during boot
for each VF BAR).

Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Yu Zhao <yu.zhao@intel.com>
Cc: stable@kernel.org
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-08-30 08:37:25 -07:00

618 lines
17 KiB
C
Raw Blame History

/*
* drivers/pci/setup-bus.c
*
* Extruded from code written by
* Dave Rusling (david.rusling@reo.mts.dec.com)
* David Mosberger (davidm@cs.arizona.edu)
* David Miller (davem@redhat.com)
*
* Support routines for initializing a PCI subsystem.
*/
/*
* Nov 2000, Ivan Kokshaysky <ink@jurassic.park.msu.ru>
* PCI-PCI bridges cleanup, sorted resource allocation.
* Feb 2002, Ivan Kokshaysky <ink@jurassic.park.msu.ru>
* Converted to allocation in 3 passes, which gives
* tighter packing. Prefetchable range support.
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/errno.h>
#include <linux/ioport.h>
#include <linux/cache.h>
#include <linux/slab.h>
#include "pci.h"
static void pbus_assign_resources_sorted(const struct pci_bus *bus)
{
struct pci_dev *dev;
struct resource *res;
struct resource_list head, *list, *tmp;
int idx;
head.next = NULL;
list_for_each_entry(dev, &bus->devices, bus_list) {
u16 class = dev->class >> 8;
/* Don't touch classless devices or host bridges or ioapics. */
if (class == PCI_CLASS_NOT_DEFINED ||
class == PCI_CLASS_BRIDGE_HOST)
continue;
/* Don't touch ioapic devices already enabled by firmware */
if (class == PCI_CLASS_SYSTEM_PIC) {
u16 command;
pci_read_config_word(dev, PCI_COMMAND, &command);
if (command & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY))
continue;
}
pdev_sort_resources(dev, &head);
}
for (list = head.next; list;) {
res = list->res;
idx = res - &list->dev->resource[0];
if (pci_assign_resource(list->dev, idx)) {
res->start = 0;
res->end = 0;
res->flags = 0;
}
tmp = list;
list = list->next;
kfree(tmp);
}
}
void pci_setup_cardbus(struct pci_bus *bus)
{
struct pci_dev *bridge = bus->self;
struct pci_bus_region region;
dev_info(&bridge->dev, "CardBus bridge, secondary bus %04x:%02x\n",
pci_domain_nr(bus), bus->number);
pcibios_resource_to_bus(bridge, &region, bus->resource[0]);
if (bus->resource[0]->flags & IORESOURCE_IO) {
/*
* The IO resource is allocated a range twice as large as it
* would normally need. This allows us to set both IO regs.
*/
dev_info(&bridge->dev, " IO window: %#08lx-%#08lx\n",
(unsigned long)region.start,
(unsigned long)region.end);
pci_write_config_dword(bridge, PCI_CB_IO_BASE_0,
region.start);
pci_write_config_dword(bridge, PCI_CB_IO_LIMIT_0,
region.end);
}
pcibios_resource_to_bus(bridge, &region, bus->resource[1]);
if (bus->resource[1]->flags & IORESOURCE_IO) {
dev_info(&bridge->dev, " IO window: %#08lx-%#08lx\n",
(unsigned long)region.start,
(unsigned long)region.end);
pci_write_config_dword(bridge, PCI_CB_IO_BASE_1,
region.start);
pci_write_config_dword(bridge, PCI_CB_IO_LIMIT_1,
region.end);
}
pcibios_resource_to_bus(bridge, &region, bus->resource[2]);
if (bus->resource[2]->flags & IORESOURCE_MEM) {
dev_info(&bridge->dev, " PREFETCH window: %#08lx-%#08lx\n",
(unsigned long)region.start,
(unsigned long)region.end);
pci_write_config_dword(bridge, PCI_CB_MEMORY_BASE_0,
region.start);
pci_write_config_dword(bridge, PCI_CB_MEMORY_LIMIT_0,
region.end);
}
pcibios_resource_to_bus(bridge, &region, bus->resource[3]);
if (bus->resource[3]->flags & IORESOURCE_MEM) {
dev_info(&bridge->dev, " MEM window: %#08lx-%#08lx\n",
(unsigned long)region.start,
(unsigned long)region.end);
pci_write_config_dword(bridge, PCI_CB_MEMORY_BASE_1,
region.start);
pci_write_config_dword(bridge, PCI_CB_MEMORY_LIMIT_1,
region.end);
}
}
EXPORT_SYMBOL(pci_setup_cardbus);
/* Initialize bridges with base/limit values we have collected.
PCI-to-PCI Bridge Architecture Specification rev. 1.1 (1998)
requires that if there is no I/O ports or memory behind the
bridge, corresponding range must be turned off by writing base
value greater than limit to the bridge's base/limit registers.
Note: care must be taken when updating I/O base/limit registers
of bridges which support 32-bit I/O. This update requires two
config space writes, so it's quite possible that an I/O window of
the bridge will have some undesirable address (e.g. 0) after the
first write. Ditto 64-bit prefetchable MMIO. */
static void pci_setup_bridge(struct pci_bus *bus)
{
struct pci_dev *bridge = bus->self;
struct pci_bus_region region;
u32 l, bu, lu, io_upper16;
int pref_mem64;
if (pci_is_enabled(bridge))
return;
dev_info(&bridge->dev, "PCI bridge, secondary bus %04x:%02x\n",
pci_domain_nr(bus), bus->number);
/* Set up the top and bottom of the PCI I/O segment for this bus. */
pcibios_resource_to_bus(bridge, &region, bus->resource[0]);
if (bus->resource[0]->flags & IORESOURCE_IO) {
pci_read_config_dword(bridge, PCI_IO_BASE, &l);
l &= 0xffff0000;
l |= (region.start >> 8) & 0x00f0;
l |= region.end & 0xf000;
/* Set up upper 16 bits of I/O base/limit. */
io_upper16 = (region.end & 0xffff0000) | (region.start >> 16);
dev_info(&bridge->dev, " IO window: %#04lx-%#04lx\n",
(unsigned long)region.start,
(unsigned long)region.end);
}
else {
/* Clear upper 16 bits of I/O base/limit. */
io_upper16 = 0;
l = 0x00f0;
dev_info(&bridge->dev, " IO window: disabled\n");
}
/* Temporarily disable the I/O range before updating PCI_IO_BASE. */
pci_write_config_dword(bridge, PCI_IO_BASE_UPPER16, 0x0000ffff);
/* Update lower 16 bits of I/O base/limit. */
pci_write_config_dword(bridge, PCI_IO_BASE, l);
/* Update upper 16 bits of I/O base/limit. */
pci_write_config_dword(bridge, PCI_IO_BASE_UPPER16, io_upper16);
/* Set up the top and bottom of the PCI Memory segment
for this bus. */
pcibios_resource_to_bus(bridge, &region, bus->resource[1]);
if (bus->resource[1]->flags & IORESOURCE_MEM) {
l = (region.start >> 16) & 0xfff0;
l |= region.end & 0xfff00000;
dev_info(&bridge->dev, " MEM window: %#08lx-%#08lx\n",
(unsigned long)region.start,
(unsigned long)region.end);
}
else {
l = 0x0000fff0;
dev_info(&bridge->dev, " MEM window: disabled\n");
}
pci_write_config_dword(bridge, PCI_MEMORY_BASE, l);
/* Clear out the upper 32 bits of PREF limit.
If PCI_PREF_BASE_UPPER32 was non-zero, this temporarily
disables PREF range, which is ok. */
pci_write_config_dword(bridge, PCI_PREF_LIMIT_UPPER32, 0);
/* Set up PREF base/limit. */
pref_mem64 = 0;
bu = lu = 0;
pcibios_resource_to_bus(bridge, &region, bus->resource[2]);
if (bus->resource[2]->flags & IORESOURCE_PREFETCH) {
int width = 8;
l = (region.start >> 16) & 0xfff0;
l |= region.end & 0xfff00000;
if (bus->resource[2]->flags & IORESOURCE_MEM_64) {
pref_mem64 = 1;
bu = upper_32_bits(region.start);
lu = upper_32_bits(region.end);
width = 16;
}
dev_info(&bridge->dev, " PREFETCH window: %#0*llx-%#0*llx\n",
width, (unsigned long long)region.start,
width, (unsigned long long)region.end);
}
else {
l = 0x0000fff0;
dev_info(&bridge->dev, " PREFETCH window: disabled\n");
}
pci_write_config_dword(bridge, PCI_PREF_MEMORY_BASE, l);
if (pref_mem64) {
/* Set the upper 32 bits of PREF base & limit. */
pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32, bu);
pci_write_config_dword(bridge, PCI_PREF_LIMIT_UPPER32, lu);
}
pci_write_config_word(bridge, PCI_BRIDGE_CONTROL, bus->bridge_ctl);
}
/* Check whether the bridge supports optional I/O and
prefetchable memory ranges. If not, the respective
base/limit registers must be read-only and read as 0. */
static void pci_bridge_check_ranges(struct pci_bus *bus)
{
u16 io;
u32 pmem;
struct pci_dev *bridge = bus->self;
struct resource *b_res;
b_res = &bridge->resource[PCI_BRIDGE_RESOURCES];
b_res[1].flags |= IORESOURCE_MEM;
pci_read_config_word(bridge, PCI_IO_BASE, &io);
if (!io) {
pci_write_config_word(bridge, PCI_IO_BASE, 0xf0f0);
pci_read_config_word(bridge, PCI_IO_BASE, &io);
pci_write_config_word(bridge, PCI_IO_BASE, 0x0);
}
if (io)
b_res[0].flags |= IORESOURCE_IO;
/* DECchip 21050 pass 2 errata: the bridge may miss an address
disconnect boundary by one PCI data phase.
Workaround: do not use prefetching on this device. */
if (bridge->vendor == PCI_VENDOR_ID_DEC && bridge->device == 0x0001)
return;
pci_read_config_dword(bridge, PCI_PREF_MEMORY_BASE, &pmem);
if (!pmem) {
pci_write_config_dword(bridge, PCI_PREF_MEMORY_BASE,
0xfff0fff0);
pci_read_config_dword(bridge, PCI_PREF_MEMORY_BASE, &pmem);
pci_write_config_dword(bridge, PCI_PREF_MEMORY_BASE, 0x0);
}
if (pmem) {
b_res[2].flags |= IORESOURCE_MEM | IORESOURCE_PREFETCH;
if ((pmem & PCI_PREF_RANGE_TYPE_MASK) == PCI_PREF_RANGE_TYPE_64)
b_res[2].flags |= IORESOURCE_MEM_64;
}
/* double check if bridge does support 64 bit pref */
if (b_res[2].flags & IORESOURCE_MEM_64) {
u32 mem_base_hi, tmp;
pci_read_config_dword(bridge, PCI_PREF_BASE_UPPER32,
&mem_base_hi);
pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32,
0xffffffff);
pci_read_config_dword(bridge, PCI_PREF_BASE_UPPER32, &tmp);
if (!tmp)
b_res[2].flags &= ~IORESOURCE_MEM_64;
pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32,
mem_base_hi);
}
}
/* Helper function for sizing routines: find first available
bus resource of a given type. Note: we intentionally skip
the bus resources which have already been assigned (that is,
have non-NULL parent resource). */
static struct resource *find_free_bus_resource(struct pci_bus *bus, unsigned long type)
{
int i;
struct resource *r;
unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM |
IORESOURCE_PREFETCH;
for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) {
r = bus->resource[i];
if (r == &ioport_resource || r == &iomem_resource)
continue;
if (r && (r->flags & type_mask) == type && !r->parent)
return r;
}
return NULL;
}
/* Sizing the IO windows of the PCI-PCI bridge is trivial,
since these windows have 4K granularity and the IO ranges
of non-bridge PCI devices are limited to 256 bytes.
We must be careful with the ISA aliasing though. */
static void pbus_size_io(struct pci_bus *bus)
{
struct pci_dev *dev;
struct resource *b_res = find_free_bus_resource(bus, IORESOURCE_IO);
unsigned long size = 0, size1 = 0;
if (!b_res)
return;
list_for_each_entry(dev, &bus->devices, bus_list) {
int i;
for (i = 0; i < PCI_NUM_RESOURCES; i++) {
struct resource *r = &dev->resource[i];
unsigned long r_size;
if (r->parent || !(r->flags & IORESOURCE_IO))
continue;
r_size = resource_size(r);
if (r_size < 0x400)
/* Might be re-aligned for ISA */
size += r_size;
else
size1 += r_size;
}
}
/* To be fixed in 2.5: we should have sort of HAVE_ISA
flag in the struct pci_bus. */
#if defined(CONFIG_ISA) || defined(CONFIG_EISA)
size = (size & 0xff) + ((size & ~0xffUL) << 2);
#endif
size = ALIGN(size + size1, 4096);
if (!size) {
b_res->flags = 0;
return;
}
/* Alignment of the IO window is always 4K */
b_res->start = 4096;
b_res->end = b_res->start + size - 1;
b_res->flags |= IORESOURCE_STARTALIGN;
}
/* Calculate the size of the bus and minimal alignment which
guarantees that all child resources fit in this size. */
static int pbus_size_mem(struct pci_bus *bus, unsigned long mask, unsigned long type)
{
struct pci_dev *dev;
resource_size_t min_align, align, size;
resource_size_t aligns[12]; /* Alignments from 1Mb to 2Gb */
int order, max_order;
struct resource *b_res = find_free_bus_resource(bus, type);
unsigned int mem64_mask = 0;
if (!b_res)
return 0;
memset(aligns, 0, sizeof(aligns));
max_order = 0;
size = 0;
mem64_mask = b_res->flags & IORESOURCE_MEM_64;
b_res->flags &= ~IORESOURCE_MEM_64;
list_for_each_entry(dev, &bus->devices, bus_list) {
int i;
for (i = 0; i < PCI_NUM_RESOURCES; i++) {
struct resource *r = &dev->resource[i];
resource_size_t r_size;
if (r->parent || (r->flags & mask) != type)
continue;
r_size = resource_size(r);
/* For bridges size != alignment */
align = pci_resource_alignment(dev, r);
order = __ffs(align) - 20;
if (order > 11) {
dev_warn(&dev->dev, "BAR %d bad alignment %llx: "
"%pR\n", i, (unsigned long long)align, r);
r->flags = 0;
continue;
}
size += r_size;
if (order < 0)
order = 0;
/* Exclude ranges with size > align from
calculation of the alignment. */
if (r_size == align)
aligns[order] += align;
if (order > max_order)
max_order = order;
mem64_mask &= r->flags & IORESOURCE_MEM_64;
}
}
align = 0;
min_align = 0;
for (order = 0; order <= max_order; order++) {
resource_size_t align1 = 1;
align1 <<= (order + 20);
if (!align)
min_align = align1;
else if (ALIGN(align + min_align, min_align) < align1)
min_align = align1 >> 1;
align += aligns[order];
}
size = ALIGN(size, min_align);
if (!size) {
b_res->flags = 0;
return 1;
}
b_res->start = min_align;
b_res->end = size + min_align - 1;
b_res->flags |= IORESOURCE_STARTALIGN;
b_res->flags |= mem64_mask;
return 1;
}
static void pci_bus_size_cardbus(struct pci_bus *bus)
{
struct pci_dev *bridge = bus->self;
struct resource *b_res = &bridge->resource[PCI_BRIDGE_RESOURCES];
u16 ctrl;
/*
* Reserve some resources for CardBus. We reserve
* a fixed amount of bus space for CardBus bridges.
*/
b_res[0].start = 0;
b_res[0].end = pci_cardbus_io_size - 1;
b_res[0].flags |= IORESOURCE_IO | IORESOURCE_SIZEALIGN;
b_res[1].start = 0;
b_res[1].end = pci_cardbus_io_size - 1;
b_res[1].flags |= IORESOURCE_IO | IORESOURCE_SIZEALIGN;
/*
* Check whether prefetchable memory is supported
* by this bridge.
*/
pci_read_config_word(bridge, PCI_CB_BRIDGE_CONTROL, &ctrl);
if (!(ctrl & PCI_CB_BRIDGE_CTL_PREFETCH_MEM0)) {
ctrl |= PCI_CB_BRIDGE_CTL_PREFETCH_MEM0;
pci_write_config_word(bridge, PCI_CB_BRIDGE_CONTROL, ctrl);
pci_read_config_word(bridge, PCI_CB_BRIDGE_CONTROL, &ctrl);
}
/*
* If we have prefetchable memory support, allocate
* two regions. Otherwise, allocate one region of
* twice the size.
*/
if (ctrl & PCI_CB_BRIDGE_CTL_PREFETCH_MEM0) {
b_res[2].start = 0;
b_res[2].end = pci_cardbus_mem_size - 1;
b_res[2].flags |= IORESOURCE_MEM | IORESOURCE_PREFETCH | IORESOURCE_SIZEALIGN;
b_res[3].start = 0;
b_res[3].end = pci_cardbus_mem_size - 1;
b_res[3].flags |= IORESOURCE_MEM | IORESOURCE_SIZEALIGN;
} else {
b_res[3].start = 0;
b_res[3].end = pci_cardbus_mem_size * 2 - 1;
b_res[3].flags |= IORESOURCE_MEM | IORESOURCE_SIZEALIGN;
}
}
void __ref pci_bus_size_bridges(struct pci_bus *bus)
{
struct pci_dev *dev;
unsigned long mask, prefmask;
list_for_each_entry(dev, &bus->devices, bus_list) {
struct pci_bus *b = dev->subordinate;
if (!b)
continue;
switch (dev->class >> 8) {
case PCI_CLASS_BRIDGE_CARDBUS:
pci_bus_size_cardbus(b);
break;
case PCI_CLASS_BRIDGE_PCI:
default:
pci_bus_size_bridges(b);
break;
}
}
/* The root bus? */
if (!bus->self)
return;
switch (bus->self->class >> 8) {
case PCI_CLASS_BRIDGE_CARDBUS:
/* don't size cardbuses yet. */
break;
case PCI_CLASS_BRIDGE_PCI:
pci_bridge_check_ranges(bus);
default:
pbus_size_io(bus);
/* If the bridge supports prefetchable range, size it
separately. If it doesn't, or its prefetchable window
has already been allocated by arch code, try
non-prefetchable range for both types of PCI memory
resources. */
mask = IORESOURCE_MEM;
prefmask = IORESOURCE_MEM | IORESOURCE_PREFETCH;
if (pbus_size_mem(bus, prefmask, prefmask))
mask = prefmask; /* Success, size non-prefetch only. */
pbus_size_mem(bus, mask, IORESOURCE_MEM);
break;
}
}
EXPORT_SYMBOL(pci_bus_size_bridges);
void __ref pci_bus_assign_resources(const struct pci_bus *bus)
{
struct pci_bus *b;
struct pci_dev *dev;
pbus_assign_resources_sorted(bus);
list_for_each_entry(dev, &bus->devices, bus_list) {
b = dev->subordinate;
if (!b)
continue;
pci_bus_assign_resources(b);
switch (dev->class >> 8) {
case PCI_CLASS_BRIDGE_PCI:
pci_setup_bridge(b);
break;
case PCI_CLASS_BRIDGE_CARDBUS:
pci_setup_cardbus(b);
break;
default:
dev_info(&dev->dev, "not setting up bridge for bus "
"%04x:%02x\n", pci_domain_nr(b), b->number);
break;
}
}
}
EXPORT_SYMBOL(pci_bus_assign_resources);
static void pci_bus_dump_res(struct pci_bus *bus)
{
int i;
for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) {
struct resource *res = bus->resource[i];
if (!res || !res->end)
continue;
dev_printk(KERN_DEBUG, &bus->dev, "resource %d %s %pR\n", i,
(res->flags & IORESOURCE_IO) ? "io: " :
((res->flags & IORESOURCE_PREFETCH)? "pref mem":"mem:"),
res);
}
}
static void pci_bus_dump_resources(struct pci_bus *bus)
{
struct pci_bus *b;
struct pci_dev *dev;
pci_bus_dump_res(bus);
list_for_each_entry(dev, &bus->devices, bus_list) {
b = dev->subordinate;
if (!b)
continue;
pci_bus_dump_resources(b);
}
}
void __init
pci_assign_unassigned_resources(void)
{
struct pci_bus *bus;
/* Depth first, calculate sizes and alignments of all
subordinate buses. */
list_for_each_entry(bus, &pci_root_buses, node) {
pci_bus_size_bridges(bus);
}
/* Depth last, allocate resources and update the hardware. */
list_for_each_entry(bus, &pci_root_buses, node) {
pci_bus_assign_resources(bus);
pci_enable_bridges(bus);
}
/* dump the resource on buses */
list_for_each_entry(bus, &pci_root_buses, node) {
pci_bus_dump_resources(bus);
}
}
Reference in New Issue View Git Blame Copy Permalink