mirror of
https://github.com/torvalds/linux.git
synced 2024-11-13 07:31:45 +00:00
0326074ff4
Core ---- - Introduce and use a single page frag cache for allocating small skb heads, clawing back the 10-20% performance regression in UDP flood test from previous fixes. - Run packets which already went thru HW coalescing thru SW GRO. This significantly improves TCP segment coalescing and simplifies deployments as different workloads benefit from HW or SW GRO. - Shrink the size of the base zero-copy send structure. - Move TCP init under a new slow / sleepable version of DO_ONCE(). BPF --- - Add BPF-specific, any-context-safe memory allocator. - Add helpers/kfuncs for PKCS#7 signature verification from BPF programs. - Define a new map type and related helpers for user space -> kernel communication over a ring buffer (BPF_MAP_TYPE_USER_RINGBUF). - Allow targeting BPF iterators to loop through resources of one task/thread. - Add ability to call selected destructive functions. Expose crash_kexec() to allow BPF to trigger a kernel dump. Use CAP_SYS_BOOT check on the loading process to judge permissions. - Enable BPF to collect custom hierarchical cgroup stats efficiently by integrating with the rstat framework. - Support struct arguments for trampoline based programs. Only structs with size <= 16B and x86 are supported. - Invoke cgroup/connect{4,6} programs for unprivileged ICMP ping sockets (instead of just TCP and UDP sockets). - Add a helper for accessing CLOCK_TAI for time sensitive network related programs. - Support accessing network tunnel metadata's flags. - Make TCP SYN ACK RTO tunable by BPF programs with TCP Fast Open. - Add support for writing to Netfilter's nf_conn:mark. Protocols --------- - WiFi: more Extremely High Throughput (EHT) and Multi-Link Operation (MLO) work (802.11be, WiFi 7). - vsock: improve support for SO_RCVLOWAT. - SMC: support SO_REUSEPORT. - Netlink: define and document how to use netlink in a "modern" way. Support reporting missing attributes via extended ACK. - IPSec: support collect metadata mode for xfrm interfaces. - TCPv6: send consistent autoflowlabel in SYN_RECV state and RST packets. - TCP: introduce optional per-netns connection hash table to allow better isolation between namespaces (opt-in, at the cost of memory and cache pressure). - MPTCP: support TCP_FASTOPEN_CONNECT. - Add NEXT-C-SID support in Segment Routing (SRv6) End behavior. - Adjust IP_UNICAST_IF sockopt behavior for connected UDP sockets. - Open vSwitch: - Allow specifying ifindex of new interfaces. - Allow conntrack and metering in non-initial user namespace. - TLS: support the Korean ARIA-GCM crypto algorithm. - Remove DECnet support. Driver API ---------- - Allow selecting the conduit interface used by each port in DSA switches, at runtime. - Ethernet Power Sourcing Equipment and Power Device support. - Add tc-taprio support for queueMaxSDU parameter, i.e. setting per traffic class max frame size for time-based packet schedules. - Support PHY rate matching - adapting between differing host-side and link-side speeds. - Introduce QUSGMII PHY mode and 1000BASE-KX interface mode. - Validate OF (device tree) nodes for DSA shared ports; make phylink-related properties mandatory on DSA and CPU ports. Enforcing more uniformity should allow transitioning to phylink. - Require that flash component name used during update matches one of the components for which version is reported by info_get(). - Remove "weight" argument from driver-facing NAPI API as much as possible. It's one of those magic knobs which seemed like a good idea at the time but is too indirect to use in practice. - Support offload of TLS connections with 256 bit keys. New hardware / drivers ---------------------- - Ethernet: - Microchip KSZ9896 6-port Gigabit Ethernet Switch - Renesas Ethernet AVB (EtherAVB-IF) Gen4 SoCs - Analog Devices ADIN1110 and ADIN2111 industrial single pair Ethernet (10BASE-T1L) MAC+PHY. - Rockchip RV1126 Gigabit Ethernet (a version of stmmac IP). - Ethernet SFPs / modules: - RollBall / Hilink / Turris 10G copper SFPs - HALNy GPON module - WiFi: - CYW43439 SDIO chipset (brcmfmac) - CYW89459 PCIe chipset (brcmfmac) - BCM4378 on Apple platforms (brcmfmac) Drivers ------- - CAN: - gs_usb: HW timestamp support - Ethernet PHYs: - lan8814: cable diagnostics - Ethernet NICs: - Intel (100G): - implement control of FCS/CRC stripping - port splitting via devlink - L2TPv3 filtering offload - nVidia/Mellanox: - tunnel offload for sub-functions - MACSec offload, w/ Extended packet number and replay window offload - significantly restructure, and optimize the AF_XDP support, align the behavior with other vendors - Huawei: - configuring DSCP map for traffic class selection - querying standard FEC statistics - querying SerDes lane number via ethtool - Marvell/Cavium: - egress priority flow control - MACSec offload - AMD/SolarFlare: - PTP over IPv6 and raw Ethernet - small / embedded: - ax88772: convert to phylink (to support SFP cages) - altera: tse: convert to phylink - ftgmac100: support fixed link - enetc: standard Ethtool counters - macb: ZynqMP SGMII dynamic configuration support - tsnep: support multi-queue and use page pool - lan743x: Rx IP & TCP checksum offload - igc: add xdp frags support to ndo_xdp_xmit - Ethernet high-speed switches: - Marvell (prestera): - support SPAN port features (traffic mirroring) - nexthop object offloading - Microchip (sparx5): - multicast forwarding offload - QoS queuing offload (tc-mqprio, tc-tbf, tc-ets) - Ethernet embedded switches: - Marvell (mv88e6xxx): - support RGMII cmode - NXP (felix): - standardized ethtool counters - Microchip (lan966x): - QoS queuing offload (tc-mqprio, tc-tbf, tc-cbs, tc-ets) - traffic policing and mirroring - link aggregation / bonding offload - QUSGMII PHY mode support - Qualcomm 802.11ax WiFi (ath11k): - cold boot calibration support on WCN6750 - support to connect to a non-transmit MBSSID AP profile - enable remain-on-channel support on WCN6750 - Wake-on-WLAN support for WCN6750 - support to provide transmit power from firmware via nl80211 - support to get power save duration for each client - spectral scan support for 160 MHz - MediaTek WiFi (mt76): - WiFi-to-Ethernet bridging offload for MT7986 chips - RealTek WiFi (rtw89): - P2P support Signed-off-by: Jakub Kicinski <kuba@kernel.org> -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmM7vtkACgkQMUZtbf5S Irvotg//dmh53rC+UMKO3OgOqPlSMnaqzbUdDEfN6mj4Mpox7Csb8zERVURHhBHY fvlXWsDgxmvgTebI5fvNC5+f1iW5xcqgJV2TWnNmDOKWwvQwb6qQfgixVmunvkpe IIukMXYt0dAf9bXeeEfbNXcCb85cPwB76stX0tMV6BX7osp3T0TL1fvFk0NJkL0j TeydLad/yAQtPb4TbeWYjNDoxPVDf0cVpUrevLGmWE88UMYmgTqPze+h1W5Wri52 bzjdLklY/4cgcIZClHQ6F9CeRWqEBxvujA5Hj/cwOcn/ptVVJWUGi7sQo3sYkoSs HFu+F8XsTec14kGNC0Ab40eVdqs5l/w8+E+4jvgXeKGOtVns8DwoiUIzqXpyty89 Ib04mffrwWNjFtHvo/kIsNwP05X2PGE9HUHfwsTUfisl/ASvMmQp7D7vUoqQC/4B AMVzT5qpjkmfBHYQQGuw8FxJhMeAOjC6aAo6censhXJyiUhIfleQsN0syHdaNb8q 9RZlhAgQoVb6ZgvBV8r8unQh/WtNZ3AopwifwVJld2unsE/UNfQy2KyqOWBES/zf LP9sfuX0JnmHn8s1BQEUMPU1jF9ZVZCft7nufJDL6JhlAL+bwZeEN4yCiAHOPZqE ymSLHI9s8yWZoNpuMWKrI9kFexVnQFKmA3+quAJUcYHNMSsLkL8= =Gsio -----END PGP SIGNATURE----- Merge tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Introduce and use a single page frag cache for allocating small skb heads, clawing back the 10-20% performance regression in UDP flood test from previous fixes. - Run packets which already went thru HW coalescing thru SW GRO. This significantly improves TCP segment coalescing and simplifies deployments as different workloads benefit from HW or SW GRO. - Shrink the size of the base zero-copy send structure. - Move TCP init under a new slow / sleepable version of DO_ONCE(). BPF: - Add BPF-specific, any-context-safe memory allocator. - Add helpers/kfuncs for PKCS#7 signature verification from BPF programs. - Define a new map type and related helpers for user space -> kernel communication over a ring buffer (BPF_MAP_TYPE_USER_RINGBUF). - Allow targeting BPF iterators to loop through resources of one task/thread. - Add ability to call selected destructive functions. Expose crash_kexec() to allow BPF to trigger a kernel dump. Use CAP_SYS_BOOT check on the loading process to judge permissions. - Enable BPF to collect custom hierarchical cgroup stats efficiently by integrating with the rstat framework. - Support struct arguments for trampoline based programs. Only structs with size <= 16B and x86 are supported. - Invoke cgroup/connect{4,6} programs for unprivileged ICMP ping sockets (instead of just TCP and UDP sockets). - Add a helper for accessing CLOCK_TAI for time sensitive network related programs. - Support accessing network tunnel metadata's flags. - Make TCP SYN ACK RTO tunable by BPF programs with TCP Fast Open. - Add support for writing to Netfilter's nf_conn:mark. Protocols: - WiFi: more Extremely High Throughput (EHT) and Multi-Link Operation (MLO) work (802.11be, WiFi 7). - vsock: improve support for SO_RCVLOWAT. - SMC: support SO_REUSEPORT. - Netlink: define and document how to use netlink in a "modern" way. Support reporting missing attributes via extended ACK. - IPSec: support collect metadata mode for xfrm interfaces. - TCPv6: send consistent autoflowlabel in SYN_RECV state and RST packets. - TCP: introduce optional per-netns connection hash table to allow better isolation between namespaces (opt-in, at the cost of memory and cache pressure). - MPTCP: support TCP_FASTOPEN_CONNECT. - Add NEXT-C-SID support in Segment Routing (SRv6) End behavior. - Adjust IP_UNICAST_IF sockopt behavior for connected UDP sockets. - Open vSwitch: - Allow specifying ifindex of new interfaces. - Allow conntrack and metering in non-initial user namespace. - TLS: support the Korean ARIA-GCM crypto algorithm. - Remove DECnet support. Driver API: - Allow selecting the conduit interface used by each port in DSA switches, at runtime. - Ethernet Power Sourcing Equipment and Power Device support. - Add tc-taprio support for queueMaxSDU parameter, i.e. setting per traffic class max frame size for time-based packet schedules. - Support PHY rate matching - adapting between differing host-side and link-side speeds. - Introduce QUSGMII PHY mode and 1000BASE-KX interface mode. - Validate OF (device tree) nodes for DSA shared ports; make phylink-related properties mandatory on DSA and CPU ports. Enforcing more uniformity should allow transitioning to phylink. - Require that flash component name used during update matches one of the components for which version is reported by info_get(). - Remove "weight" argument from driver-facing NAPI API as much as possible. It's one of those magic knobs which seemed like a good idea at the time but is too indirect to use in practice. - Support offload of TLS connections with 256 bit keys. New hardware / drivers: - Ethernet: - Microchip KSZ9896 6-port Gigabit Ethernet Switch - Renesas Ethernet AVB (EtherAVB-IF) Gen4 SoCs - Analog Devices ADIN1110 and ADIN2111 industrial single pair Ethernet (10BASE-T1L) MAC+PHY. - Rockchip RV1126 Gigabit Ethernet (a version of stmmac IP). - Ethernet SFPs / modules: - RollBall / Hilink / Turris 10G copper SFPs - HALNy GPON module - WiFi: - CYW43439 SDIO chipset (brcmfmac) - CYW89459 PCIe chipset (brcmfmac) - BCM4378 on Apple platforms (brcmfmac) Drivers: - CAN: - gs_usb: HW timestamp support - Ethernet PHYs: - lan8814: cable diagnostics - Ethernet NICs: - Intel (100G): - implement control of FCS/CRC stripping - port splitting via devlink - L2TPv3 filtering offload - nVidia/Mellanox: - tunnel offload for sub-functions - MACSec offload, w/ Extended packet number and replay window offload - significantly restructure, and optimize the AF_XDP support, align the behavior with other vendors - Huawei: - configuring DSCP map for traffic class selection - querying standard FEC statistics - querying SerDes lane number via ethtool - Marvell/Cavium: - egress priority flow control - MACSec offload - AMD/SolarFlare: - PTP over IPv6 and raw Ethernet - small / embedded: - ax88772: convert to phylink (to support SFP cages) - altera: tse: convert to phylink - ftgmac100: support fixed link - enetc: standard Ethtool counters - macb: ZynqMP SGMII dynamic configuration support - tsnep: support multi-queue and use page pool - lan743x: Rx IP & TCP checksum offload - igc: add xdp frags support to ndo_xdp_xmit - Ethernet high-speed switches: - Marvell (prestera): - support SPAN port features (traffic mirroring) - nexthop object offloading - Microchip (sparx5): - multicast forwarding offload - QoS queuing offload (tc-mqprio, tc-tbf, tc-ets) - Ethernet embedded switches: - Marvell (mv88e6xxx): - support RGMII cmode - NXP (felix): - standardized ethtool counters - Microchip (lan966x): - QoS queuing offload (tc-mqprio, tc-tbf, tc-cbs, tc-ets) - traffic policing and mirroring - link aggregation / bonding offload - QUSGMII PHY mode support - Qualcomm 802.11ax WiFi (ath11k): - cold boot calibration support on WCN6750 - support to connect to a non-transmit MBSSID AP profile - enable remain-on-channel support on WCN6750 - Wake-on-WLAN support for WCN6750 - support to provide transmit power from firmware via nl80211 - support to get power save duration for each client - spectral scan support for 160 MHz - MediaTek WiFi (mt76): - WiFi-to-Ethernet bridging offload for MT7986 chips - RealTek WiFi (rtw89): - P2P support" * tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1864 commits) eth: pse: add missing static inlines once: rename _SLOW to _SLEEPABLE net: pse-pd: add regulator based PSE driver dt-bindings: net: pse-dt: add bindings for regulator based PoDL PSE controller ethtool: add interface to interact with Ethernet Power Equipment net: mdiobus: search for PSE nodes by parsing PHY nodes. net: mdiobus: fwnode_mdiobus_register_phy() rework error handling net: add framework to support Ethernet PSE and PDs devices dt-bindings: net: phy: add PoDL PSE property net: marvell: prestera: Propagate nh state from hw to kernel net: marvell: prestera: Add neighbour cache accounting net: marvell: prestera: add stub handler neighbour events net: marvell: prestera: Add heplers to interact with fib_notifier_info net: marvell: prestera: Add length macros for prestera_ip_addr net: marvell: prestera: add delayed wq and flush wq on deinit net: marvell: prestera: Add strict cleanup of fib arbiter net: marvell: prestera: Add cleanup of allocated fib_nodes net: marvell: prestera: Add router nexthops ABI eth: octeon: fix build after netif_napi_add() changes net/mlx5: E-Switch, Return EBUSY if can't get mode lock ...
358 lines
10 KiB
C
358 lines
10 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
|
|
/*
|
|
* Copyright (C) 2020 Google LLC.
|
|
*/
|
|
|
|
#include <linux/filter.h>
|
|
#include <linux/bpf.h>
|
|
#include <linux/btf.h>
|
|
#include <linux/binfmts.h>
|
|
#include <linux/lsm_hooks.h>
|
|
#include <linux/bpf_lsm.h>
|
|
#include <linux/kallsyms.h>
|
|
#include <linux/bpf_verifier.h>
|
|
#include <net/bpf_sk_storage.h>
|
|
#include <linux/bpf_local_storage.h>
|
|
#include <linux/btf_ids.h>
|
|
#include <linux/ima.h>
|
|
#include <linux/bpf-cgroup.h>
|
|
|
|
/* For every LSM hook that allows attachment of BPF programs, declare a nop
|
|
* function where a BPF program can be attached.
|
|
*/
|
|
#define LSM_HOOK(RET, DEFAULT, NAME, ...) \
|
|
noinline RET bpf_lsm_##NAME(__VA_ARGS__) \
|
|
{ \
|
|
return DEFAULT; \
|
|
}
|
|
|
|
#include <linux/lsm_hook_defs.h>
|
|
#undef LSM_HOOK
|
|
|
|
#define LSM_HOOK(RET, DEFAULT, NAME, ...) BTF_ID(func, bpf_lsm_##NAME)
|
|
BTF_SET_START(bpf_lsm_hooks)
|
|
#include <linux/lsm_hook_defs.h>
|
|
#undef LSM_HOOK
|
|
BTF_SET_END(bpf_lsm_hooks)
|
|
|
|
/* List of LSM hooks that should operate on 'current' cgroup regardless
|
|
* of function signature.
|
|
*/
|
|
BTF_SET_START(bpf_lsm_current_hooks)
|
|
/* operate on freshly allocated sk without any cgroup association */
|
|
#ifdef CONFIG_SECURITY_NETWORK
|
|
BTF_ID(func, bpf_lsm_sk_alloc_security)
|
|
BTF_ID(func, bpf_lsm_sk_free_security)
|
|
#endif
|
|
BTF_SET_END(bpf_lsm_current_hooks)
|
|
|
|
/* List of LSM hooks that trigger while the socket is properly locked.
|
|
*/
|
|
BTF_SET_START(bpf_lsm_locked_sockopt_hooks)
|
|
#ifdef CONFIG_SECURITY_NETWORK
|
|
BTF_ID(func, bpf_lsm_socket_sock_rcv_skb)
|
|
BTF_ID(func, bpf_lsm_sock_graft)
|
|
BTF_ID(func, bpf_lsm_inet_csk_clone)
|
|
BTF_ID(func, bpf_lsm_inet_conn_established)
|
|
#endif
|
|
BTF_SET_END(bpf_lsm_locked_sockopt_hooks)
|
|
|
|
/* List of LSM hooks that trigger while the socket is _not_ locked,
|
|
* but it's ok to call bpf_{g,s}etsockopt because the socket is still
|
|
* in the early init phase.
|
|
*/
|
|
BTF_SET_START(bpf_lsm_unlocked_sockopt_hooks)
|
|
#ifdef CONFIG_SECURITY_NETWORK
|
|
BTF_ID(func, bpf_lsm_socket_post_create)
|
|
BTF_ID(func, bpf_lsm_socket_socketpair)
|
|
#endif
|
|
BTF_SET_END(bpf_lsm_unlocked_sockopt_hooks)
|
|
|
|
#ifdef CONFIG_CGROUP_BPF
|
|
void bpf_lsm_find_cgroup_shim(const struct bpf_prog *prog,
|
|
bpf_func_t *bpf_func)
|
|
{
|
|
const struct btf_param *args __maybe_unused;
|
|
|
|
if (btf_type_vlen(prog->aux->attach_func_proto) < 1 ||
|
|
btf_id_set_contains(&bpf_lsm_current_hooks,
|
|
prog->aux->attach_btf_id)) {
|
|
*bpf_func = __cgroup_bpf_run_lsm_current;
|
|
return;
|
|
}
|
|
|
|
#ifdef CONFIG_NET
|
|
args = btf_params(prog->aux->attach_func_proto);
|
|
|
|
if (args[0].type == btf_sock_ids[BTF_SOCK_TYPE_SOCKET])
|
|
*bpf_func = __cgroup_bpf_run_lsm_socket;
|
|
else if (args[0].type == btf_sock_ids[BTF_SOCK_TYPE_SOCK])
|
|
*bpf_func = __cgroup_bpf_run_lsm_sock;
|
|
else
|
|
#endif
|
|
*bpf_func = __cgroup_bpf_run_lsm_current;
|
|
}
|
|
#endif
|
|
|
|
int bpf_lsm_verify_prog(struct bpf_verifier_log *vlog,
|
|
const struct bpf_prog *prog)
|
|
{
|
|
if (!prog->gpl_compatible) {
|
|
bpf_log(vlog,
|
|
"LSM programs must have a GPL compatible license\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!btf_id_set_contains(&bpf_lsm_hooks, prog->aux->attach_btf_id)) {
|
|
bpf_log(vlog, "attach_btf_id %u points to wrong type name %s\n",
|
|
prog->aux->attach_btf_id, prog->aux->attach_func_name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Mask for all the currently supported BPRM option flags */
|
|
#define BPF_F_BRPM_OPTS_MASK BPF_F_BPRM_SECUREEXEC
|
|
|
|
BPF_CALL_2(bpf_bprm_opts_set, struct linux_binprm *, bprm, u64, flags)
|
|
{
|
|
if (flags & ~BPF_F_BRPM_OPTS_MASK)
|
|
return -EINVAL;
|
|
|
|
bprm->secureexec = (flags & BPF_F_BPRM_SECUREEXEC);
|
|
return 0;
|
|
}
|
|
|
|
BTF_ID_LIST_SINGLE(bpf_bprm_opts_set_btf_ids, struct, linux_binprm)
|
|
|
|
static const struct bpf_func_proto bpf_bprm_opts_set_proto = {
|
|
.func = bpf_bprm_opts_set,
|
|
.gpl_only = false,
|
|
.ret_type = RET_INTEGER,
|
|
.arg1_type = ARG_PTR_TO_BTF_ID,
|
|
.arg1_btf_id = &bpf_bprm_opts_set_btf_ids[0],
|
|
.arg2_type = ARG_ANYTHING,
|
|
};
|
|
|
|
BPF_CALL_3(bpf_ima_inode_hash, struct inode *, inode, void *, dst, u32, size)
|
|
{
|
|
return ima_inode_hash(inode, dst, size);
|
|
}
|
|
|
|
static bool bpf_ima_inode_hash_allowed(const struct bpf_prog *prog)
|
|
{
|
|
return bpf_lsm_is_sleepable_hook(prog->aux->attach_btf_id);
|
|
}
|
|
|
|
BTF_ID_LIST_SINGLE(bpf_ima_inode_hash_btf_ids, struct, inode)
|
|
|
|
static const struct bpf_func_proto bpf_ima_inode_hash_proto = {
|
|
.func = bpf_ima_inode_hash,
|
|
.gpl_only = false,
|
|
.ret_type = RET_INTEGER,
|
|
.arg1_type = ARG_PTR_TO_BTF_ID,
|
|
.arg1_btf_id = &bpf_ima_inode_hash_btf_ids[0],
|
|
.arg2_type = ARG_PTR_TO_UNINIT_MEM,
|
|
.arg3_type = ARG_CONST_SIZE,
|
|
.allowed = bpf_ima_inode_hash_allowed,
|
|
};
|
|
|
|
BPF_CALL_3(bpf_ima_file_hash, struct file *, file, void *, dst, u32, size)
|
|
{
|
|
return ima_file_hash(file, dst, size);
|
|
}
|
|
|
|
BTF_ID_LIST_SINGLE(bpf_ima_file_hash_btf_ids, struct, file)
|
|
|
|
static const struct bpf_func_proto bpf_ima_file_hash_proto = {
|
|
.func = bpf_ima_file_hash,
|
|
.gpl_only = false,
|
|
.ret_type = RET_INTEGER,
|
|
.arg1_type = ARG_PTR_TO_BTF_ID,
|
|
.arg1_btf_id = &bpf_ima_file_hash_btf_ids[0],
|
|
.arg2_type = ARG_PTR_TO_UNINIT_MEM,
|
|
.arg3_type = ARG_CONST_SIZE,
|
|
.allowed = bpf_ima_inode_hash_allowed,
|
|
};
|
|
|
|
BPF_CALL_1(bpf_get_attach_cookie, void *, ctx)
|
|
{
|
|
struct bpf_trace_run_ctx *run_ctx;
|
|
|
|
run_ctx = container_of(current->bpf_ctx, struct bpf_trace_run_ctx, run_ctx);
|
|
return run_ctx->bpf_cookie;
|
|
}
|
|
|
|
static const struct bpf_func_proto bpf_get_attach_cookie_proto = {
|
|
.func = bpf_get_attach_cookie,
|
|
.gpl_only = false,
|
|
.ret_type = RET_INTEGER,
|
|
.arg1_type = ARG_PTR_TO_CTX,
|
|
};
|
|
|
|
static const struct bpf_func_proto *
|
|
bpf_lsm_func_proto(enum bpf_func_id func_id, const struct bpf_prog *prog)
|
|
{
|
|
const struct bpf_func_proto *func_proto;
|
|
|
|
if (prog->expected_attach_type == BPF_LSM_CGROUP) {
|
|
func_proto = cgroup_common_func_proto(func_id, prog);
|
|
if (func_proto)
|
|
return func_proto;
|
|
}
|
|
|
|
switch (func_id) {
|
|
case BPF_FUNC_inode_storage_get:
|
|
return &bpf_inode_storage_get_proto;
|
|
case BPF_FUNC_inode_storage_delete:
|
|
return &bpf_inode_storage_delete_proto;
|
|
#ifdef CONFIG_NET
|
|
case BPF_FUNC_sk_storage_get:
|
|
return &bpf_sk_storage_get_proto;
|
|
case BPF_FUNC_sk_storage_delete:
|
|
return &bpf_sk_storage_delete_proto;
|
|
#endif /* CONFIG_NET */
|
|
case BPF_FUNC_spin_lock:
|
|
return &bpf_spin_lock_proto;
|
|
case BPF_FUNC_spin_unlock:
|
|
return &bpf_spin_unlock_proto;
|
|
case BPF_FUNC_bprm_opts_set:
|
|
return &bpf_bprm_opts_set_proto;
|
|
case BPF_FUNC_ima_inode_hash:
|
|
return prog->aux->sleepable ? &bpf_ima_inode_hash_proto : NULL;
|
|
case BPF_FUNC_ima_file_hash:
|
|
return prog->aux->sleepable ? &bpf_ima_file_hash_proto : NULL;
|
|
case BPF_FUNC_get_attach_cookie:
|
|
return bpf_prog_has_trampoline(prog) ? &bpf_get_attach_cookie_proto : NULL;
|
|
#ifdef CONFIG_NET
|
|
case BPF_FUNC_setsockopt:
|
|
if (prog->expected_attach_type != BPF_LSM_CGROUP)
|
|
return NULL;
|
|
if (btf_id_set_contains(&bpf_lsm_locked_sockopt_hooks,
|
|
prog->aux->attach_btf_id))
|
|
return &bpf_sk_setsockopt_proto;
|
|
if (btf_id_set_contains(&bpf_lsm_unlocked_sockopt_hooks,
|
|
prog->aux->attach_btf_id))
|
|
return &bpf_unlocked_sk_setsockopt_proto;
|
|
return NULL;
|
|
case BPF_FUNC_getsockopt:
|
|
if (prog->expected_attach_type != BPF_LSM_CGROUP)
|
|
return NULL;
|
|
if (btf_id_set_contains(&bpf_lsm_locked_sockopt_hooks,
|
|
prog->aux->attach_btf_id))
|
|
return &bpf_sk_getsockopt_proto;
|
|
if (btf_id_set_contains(&bpf_lsm_unlocked_sockopt_hooks,
|
|
prog->aux->attach_btf_id))
|
|
return &bpf_unlocked_sk_getsockopt_proto;
|
|
return NULL;
|
|
#endif
|
|
default:
|
|
return tracing_prog_func_proto(func_id, prog);
|
|
}
|
|
}
|
|
|
|
/* The set of hooks which are called without pagefaults disabled and are allowed
|
|
* to "sleep" and thus can be used for sleepable BPF programs.
|
|
*/
|
|
BTF_SET_START(sleepable_lsm_hooks)
|
|
BTF_ID(func, bpf_lsm_bpf)
|
|
BTF_ID(func, bpf_lsm_bpf_map)
|
|
BTF_ID(func, bpf_lsm_bpf_map_alloc_security)
|
|
BTF_ID(func, bpf_lsm_bpf_map_free_security)
|
|
BTF_ID(func, bpf_lsm_bpf_prog)
|
|
BTF_ID(func, bpf_lsm_bprm_check_security)
|
|
BTF_ID(func, bpf_lsm_bprm_committed_creds)
|
|
BTF_ID(func, bpf_lsm_bprm_committing_creds)
|
|
BTF_ID(func, bpf_lsm_bprm_creds_for_exec)
|
|
BTF_ID(func, bpf_lsm_bprm_creds_from_file)
|
|
BTF_ID(func, bpf_lsm_capget)
|
|
BTF_ID(func, bpf_lsm_capset)
|
|
BTF_ID(func, bpf_lsm_cred_prepare)
|
|
BTF_ID(func, bpf_lsm_file_ioctl)
|
|
BTF_ID(func, bpf_lsm_file_lock)
|
|
BTF_ID(func, bpf_lsm_file_open)
|
|
BTF_ID(func, bpf_lsm_file_receive)
|
|
|
|
#ifdef CONFIG_SECURITY_NETWORK
|
|
BTF_ID(func, bpf_lsm_inet_conn_established)
|
|
#endif /* CONFIG_SECURITY_NETWORK */
|
|
|
|
BTF_ID(func, bpf_lsm_inode_create)
|
|
BTF_ID(func, bpf_lsm_inode_free_security)
|
|
BTF_ID(func, bpf_lsm_inode_getattr)
|
|
BTF_ID(func, bpf_lsm_inode_getxattr)
|
|
BTF_ID(func, bpf_lsm_inode_mknod)
|
|
BTF_ID(func, bpf_lsm_inode_need_killpriv)
|
|
BTF_ID(func, bpf_lsm_inode_post_setxattr)
|
|
BTF_ID(func, bpf_lsm_inode_readlink)
|
|
BTF_ID(func, bpf_lsm_inode_rename)
|
|
BTF_ID(func, bpf_lsm_inode_rmdir)
|
|
BTF_ID(func, bpf_lsm_inode_setattr)
|
|
BTF_ID(func, bpf_lsm_inode_setxattr)
|
|
BTF_ID(func, bpf_lsm_inode_symlink)
|
|
BTF_ID(func, bpf_lsm_inode_unlink)
|
|
BTF_ID(func, bpf_lsm_kernel_module_request)
|
|
BTF_ID(func, bpf_lsm_kernel_read_file)
|
|
BTF_ID(func, bpf_lsm_kernfs_init_security)
|
|
|
|
#ifdef CONFIG_KEYS
|
|
BTF_ID(func, bpf_lsm_key_free)
|
|
#endif /* CONFIG_KEYS */
|
|
|
|
BTF_ID(func, bpf_lsm_mmap_file)
|
|
BTF_ID(func, bpf_lsm_netlink_send)
|
|
BTF_ID(func, bpf_lsm_path_notify)
|
|
BTF_ID(func, bpf_lsm_release_secctx)
|
|
BTF_ID(func, bpf_lsm_sb_alloc_security)
|
|
BTF_ID(func, bpf_lsm_sb_eat_lsm_opts)
|
|
BTF_ID(func, bpf_lsm_sb_kern_mount)
|
|
BTF_ID(func, bpf_lsm_sb_mount)
|
|
BTF_ID(func, bpf_lsm_sb_remount)
|
|
BTF_ID(func, bpf_lsm_sb_set_mnt_opts)
|
|
BTF_ID(func, bpf_lsm_sb_show_options)
|
|
BTF_ID(func, bpf_lsm_sb_statfs)
|
|
BTF_ID(func, bpf_lsm_sb_umount)
|
|
BTF_ID(func, bpf_lsm_settime)
|
|
|
|
#ifdef CONFIG_SECURITY_NETWORK
|
|
BTF_ID(func, bpf_lsm_socket_accept)
|
|
BTF_ID(func, bpf_lsm_socket_bind)
|
|
BTF_ID(func, bpf_lsm_socket_connect)
|
|
BTF_ID(func, bpf_lsm_socket_create)
|
|
BTF_ID(func, bpf_lsm_socket_getpeername)
|
|
BTF_ID(func, bpf_lsm_socket_getpeersec_dgram)
|
|
BTF_ID(func, bpf_lsm_socket_getsockname)
|
|
BTF_ID(func, bpf_lsm_socket_getsockopt)
|
|
BTF_ID(func, bpf_lsm_socket_listen)
|
|
BTF_ID(func, bpf_lsm_socket_post_create)
|
|
BTF_ID(func, bpf_lsm_socket_recvmsg)
|
|
BTF_ID(func, bpf_lsm_socket_sendmsg)
|
|
BTF_ID(func, bpf_lsm_socket_shutdown)
|
|
BTF_ID(func, bpf_lsm_socket_socketpair)
|
|
#endif /* CONFIG_SECURITY_NETWORK */
|
|
|
|
BTF_ID(func, bpf_lsm_syslog)
|
|
BTF_ID(func, bpf_lsm_task_alloc)
|
|
BTF_ID(func, bpf_lsm_current_getsecid_subj)
|
|
BTF_ID(func, bpf_lsm_task_getsecid_obj)
|
|
BTF_ID(func, bpf_lsm_task_prctl)
|
|
BTF_ID(func, bpf_lsm_task_setscheduler)
|
|
BTF_ID(func, bpf_lsm_task_to_inode)
|
|
BTF_ID(func, bpf_lsm_userns_create)
|
|
BTF_SET_END(sleepable_lsm_hooks)
|
|
|
|
bool bpf_lsm_is_sleepable_hook(u32 btf_id)
|
|
{
|
|
return btf_id_set_contains(&sleepable_lsm_hooks, btf_id);
|
|
}
|
|
|
|
const struct bpf_prog_ops lsm_prog_ops = {
|
|
};
|
|
|
|
const struct bpf_verifier_ops lsm_verifier_ops = {
|
|
.get_func_proto = bpf_lsm_func_proto,
|
|
.is_valid_access = btf_ctx_access,
|
|
};
|