Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-18 18:11:56 +00:00
Code Issues Packages Projects Releases Wiki Activity
bcc5155d05
linux/drivers/usb/host/ehci-hcd.c
Jan Beulich 9fa5780bee USB EHCI/Xen: propagate controller reset information to hypervisor 
Just like for the in-tree early console debug port driver, the
hypervisor - when using a debug port based console - also needs to be
told about controller resets, so it can suppress using and then
re-initialize the debug port accordingly.

Other than the in-tree driver, the hypervisor driver actually cares
about doing this only for the device where the debug is port actually
in use, i.e. it needs to be told the coordinates of the device being
reset (quite obviously, leveraging the addition done for that would
likely benefit the in-tree driver too).

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-18 17:20:48 +01:00

1461 lines
39 KiB
C
Raw Blame History

/*
* Enhanced Host Controller Interface (EHCI) driver for USB.
*
* Maintainer: Alan Stern <stern@rowland.harvard.edu>
*
* Copyright (c) 2000-2004 by David Brownell
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software Foundation,
* Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/dmapool.h>
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/ioport.h>
#include <linux/sched.h>
#include <linux/vmalloc.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/hrtimer.h>
#include <linux/list.h>
#include <linux/interrupt.h>
#include <linux/usb.h>
#include <linux/usb/hcd.h>
#include <linux/moduleparam.h>
#include <linux/dma-mapping.h>
#include <linux/debugfs.h>
#include <linux/slab.h>
#include <linux/uaccess.h>
#include <asm/byteorder.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/unaligned.h>
#if defined(CONFIG_PPC_PS3)
#include <asm/firmware.h>
#endif
/*-------------------------------------------------------------------------*/
/*
* EHCI hc_driver implementation ... experimental, incomplete.
* Based on the final 1.0 register interface specification.
*
* USB 2.0 shows up in upcoming www.pcmcia.org technology.
* First was PCMCIA, like ISA; then CardBus, which is PCI.
* Next comes "CardBay", using USB 2.0 signals.
*
* Contains additional contributions by Brad Hards, Rory Bolt, and others.
* Special thanks to Intel and VIA for providing host controllers to
* test this driver on, and Cypress (including In-System Design) for
* providing early devices for those host controllers to talk to!
*/
#define DRIVER_AUTHOR "David Brownell"
#define DRIVER_DESC "USB 2.0 'Enhanced' Host Controller (EHCI) Driver"
static const char hcd_name [] = "ehci_hcd";
#undef VERBOSE_DEBUG
#undef EHCI_URB_TRACE
#ifdef DEBUG
#define EHCI_STATS
#endif
/* magic numbers that can affect system performance */
#define EHCI_TUNE_CERR 3 /* 0-3 qtd retries; 0 == don't stop */
#define EHCI_TUNE_RL_HS 4 /* nak throttle; see 4.9 */
#define EHCI_TUNE_RL_TT 0
#define EHCI_TUNE_MULT_HS 1 /* 1-3 transactions/uframe; 4.10.3 */
#define EHCI_TUNE_MULT_TT 1
/*
* Some drivers think it's safe to schedule isochronous transfers more than
* 256 ms into the future (partly as a result of an old bug in the scheduling
* code). In an attempt to avoid trouble, we will use a minimum scheduling
* length of 512 frames instead of 256.
*/
#define EHCI_TUNE_FLS 1 /* (medium) 512-frame schedule */
/* Initial IRQ latency: faster than hw default */
static int log2_irq_thresh = 0; // 0 to 6
module_param (log2_irq_thresh, int, S_IRUGO);
MODULE_PARM_DESC (log2_irq_thresh, "log2 IRQ latency, 1-64 microframes");
/* initial park setting: slower than hw default */
static unsigned park = 0;
module_param (park, uint, S_IRUGO);
MODULE_PARM_DESC (park, "park setting; 1-3 back-to-back async packets");
/* for flakey hardware, ignore overcurrent indicators */
static bool ignore_oc = 0;
module_param (ignore_oc, bool, S_IRUGO);
MODULE_PARM_DESC (ignore_oc, "ignore bogus hardware overcurrent indications");
/* for link power management(LPM) feature */
static unsigned int hird;
module_param(hird, int, S_IRUGO);
MODULE_PARM_DESC(hird, "host initiated resume duration, +1 for each 75us");
#define INTR_MASK (STS_IAA | STS_FATAL | STS_PCD | STS_ERR | STS_INT)
/*-------------------------------------------------------------------------*/
#include "ehci.h"
#include "ehci-dbg.c"
#include "pci-quirks.h"
/*-------------------------------------------------------------------------*/
/*
* handshake - spin reading hc until handshake completes or fails
* @ptr: address of hc register to be read
* @mask: bits to look at in result of read
* @done: value of those bits when handshake succeeds
* @usec: timeout in microseconds
*
* Returns negative errno, or zero on success
*
* Success happens when the "mask" bits have the specified value (hardware
* handshake done). There are two failure modes: "usec" have passed (major
* hardware flakeout), or the register reads as all-ones (hardware removed).
*
* That last failure should_only happen in cases like physical cardbus eject
* before driver shutdown. But it also seems to be caused by bugs in cardbus
* bridge shutdown: shutting down the bridge before the devices using it.
*/
static int handshake (struct ehci_hcd *ehci, void __iomem *ptr,
u32 mask, u32 done, int usec)
{
u32 result;
do {
result = ehci_readl(ehci, ptr);
if (result == ~(u32)0) /* card removed */
return -ENODEV;
result &= mask;
if (result == done)
return 0;
udelay (1);
usec--;
} while (usec > 0);
return -ETIMEDOUT;
}
/* check TDI/ARC silicon is in host mode */
static int tdi_in_host_mode (struct ehci_hcd *ehci)
{
u32 tmp;
tmp = ehci_readl(ehci, &ehci->regs->usbmode);
return (tmp & 3) == USBMODE_CM_HC;
}
/*
* Force HC to halt state from unknown (EHCI spec section 2.3).
* Must be called with interrupts enabled and the lock not held.
*/
static int ehci_halt (struct ehci_hcd *ehci)
{
u32 temp;
spin_lock_irq(&ehci->lock);
/* disable any irqs left enabled by previous code */
ehci_writel(ehci, 0, &ehci->regs->intr_enable);
if (ehci_is_TDI(ehci) && !tdi_in_host_mode(ehci)) {
spin_unlock_irq(&ehci->lock);
return 0;
}
/*
* This routine gets called during probe before ehci->command
* has been initialized, so we can't rely on its value.
*/
ehci->command &= ~CMD_RUN;
temp = ehci_readl(ehci, &ehci->regs->command);
temp &= ~(CMD_RUN | CMD_IAAD);
ehci_writel(ehci, temp, &ehci->regs->command);
spin_unlock_irq(&ehci->lock);
synchronize_irq(ehci_to_hcd(ehci)->irq);
return handshake(ehci, &ehci->regs->status,
STS_HALT, STS_HALT, 16 * 125);
}
/* put TDI/ARC silicon into EHCI mode */
static void tdi_reset (struct ehci_hcd *ehci)
{
u32 tmp;
tmp = ehci_readl(ehci, &ehci->regs->usbmode);
tmp |= USBMODE_CM_HC;
/* The default byte access to MMR space is LE after
* controller reset. Set the required endian mode
* for transfer buffers to match the host microprocessor
*/
if (ehci_big_endian_mmio(ehci))
tmp |= USBMODE_BE;
ehci_writel(ehci, tmp, &ehci->regs->usbmode);
}
/*
* Reset a non-running (STS_HALT == 1) controller.
* Must be called with interrupts enabled and the lock not held.
*/
static int ehci_reset (struct ehci_hcd *ehci)
{
int retval;
u32 command = ehci_readl(ehci, &ehci->regs->command);
/* If the EHCI debug controller is active, special care must be
* taken before and after a host controller reset */
if (ehci->debug && !dbgp_reset_prep(ehci_to_hcd(ehci)))
ehci->debug = NULL;
command |= CMD_RESET;
dbg_cmd (ehci, "reset", command);
ehci_writel(ehci, command, &ehci->regs->command);
ehci->rh_state = EHCI_RH_HALTED;
ehci->next_statechange = jiffies;
retval = handshake (ehci, &ehci->regs->command,
CMD_RESET, 0, 250 * 1000);
if (ehci->has_hostpc) {
ehci_writel(ehci, USBMODE_EX_HC | USBMODE_EX_VBPS,
&ehci->regs->usbmode_ex);
ehci_writel(ehci, TXFIFO_DEFAULT, &ehci->regs->txfill_tuning);
}
if (retval)
return retval;
if (ehci_is_TDI(ehci))
tdi_reset (ehci);
if (ehci->debug)
dbgp_external_startup(ehci_to_hcd(ehci));
ehci->port_c_suspend = ehci->suspended_ports =
ehci->resuming_ports = 0;
return retval;
}
/*
* Idle the controller (turn off the schedules).
* Must be called with interrupts enabled and the lock not held.
*/
static void ehci_quiesce (struct ehci_hcd *ehci)
{
u32 temp;
if (ehci->rh_state != EHCI_RH_RUNNING)
return;
/* wait for any schedule enables/disables to take effect */
temp = (ehci->command << 10) & (STS_ASS | STS_PSS);
handshake(ehci, &ehci->regs->status, STS_ASS | STS_PSS, temp, 16 * 125);
/* then disable anything that's still active */
spin_lock_irq(&ehci->lock);
ehci->command &= ~(CMD_ASE | CMD_PSE);
ehci_writel(ehci, ehci->command, &ehci->regs->command);
spin_unlock_irq(&ehci->lock);
/* hardware can take 16 microframes to turn off ... */
handshake(ehci, &ehci->regs->status, STS_ASS | STS_PSS, 0, 16 * 125);
}
/*-------------------------------------------------------------------------*/
static void end_unlink_async(struct ehci_hcd *ehci);
static void unlink_empty_async(struct ehci_hcd *ehci);
static void ehci_work(struct ehci_hcd *ehci);
static void start_unlink_intr(struct ehci_hcd *ehci, struct ehci_qh *qh);
static void end_unlink_intr(struct ehci_hcd *ehci, struct ehci_qh *qh);
#include "ehci-timer.c"
#include "ehci-hub.c"
#include "ehci-lpm.c"
#include "ehci-mem.c"
#include "ehci-q.c"
#include "ehci-sched.c"
#include "ehci-sysfs.c"
/*-------------------------------------------------------------------------*/
/* On some systems, leaving remote wakeup enabled prevents system shutdown.
* The firmware seems to think that powering off is a wakeup event!
* This routine turns off remote wakeup and everything else, on all ports.
*/
static void ehci_turn_off_all_ports(struct ehci_hcd *ehci)
{
int port = HCS_N_PORTS(ehci->hcs_params);
while (port--)
ehci_writel(ehci, PORT_RWC_BITS,
&ehci->regs->port_status[port]);
}
/*
* Halt HC, turn off all ports, and let the BIOS use the companion controllers.
* Must be called with interrupts enabled and the lock not held.
*/
static void ehci_silence_controller(struct ehci_hcd *ehci)
{
ehci_halt(ehci);
spin_lock_irq(&ehci->lock);
ehci->rh_state = EHCI_RH_HALTED;
ehci_turn_off_all_ports(ehci);
/* make BIOS/etc use companion controller during reboot */
ehci_writel(ehci, 0, &ehci->regs->configured_flag);
/* unblock posted writes */
ehci_readl(ehci, &ehci->regs->configured_flag);
spin_unlock_irq(&ehci->lock);
}
/* ehci_shutdown kick in for silicon on any bus (not just pci, etc).
* This forcibly disables dma and IRQs, helping kexec and other cases
* where the next system software may expect clean state.
*/
static void ehci_shutdown(struct usb_hcd *hcd)
{
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
spin_lock_irq(&ehci->lock);
ehci->shutdown = true;
ehci->rh_state = EHCI_RH_STOPPING;
ehci->enabled_hrtimer_events = 0;
spin_unlock_irq(&ehci->lock);
ehci_silence_controller(ehci);
hrtimer_cancel(&ehci->hrtimer);
}
static void ehci_port_power (struct ehci_hcd *ehci, int is_on)
{
unsigned port;
if (!HCS_PPC (ehci->hcs_params))
return;
ehci_dbg (ehci, "...power%s ports...\n", is_on ? "up" : "down");
for (port = HCS_N_PORTS (ehci->hcs_params); port > 0; )
(void) ehci_hub_control(ehci_to_hcd(ehci),
is_on ? SetPortFeature : ClearPortFeature,
USB_PORT_FEAT_POWER,
port--, NULL, 0);
/* Flush those writes */
ehci_readl(ehci, &ehci->regs->command);
msleep(20);
}
/*-------------------------------------------------------------------------*/
/*
* ehci_work is called from some interrupts, timers, and so on.
* it calls driver completion functions, after dropping ehci->lock.
*/
static void ehci_work (struct ehci_hcd *ehci)
{
/* another CPU may drop ehci->lock during a schedule scan while
* it reports urb completions. this flag guards against bogus
* attempts at re-entrant schedule scanning.
*/
if (ehci->scanning) {
ehci->need_rescan = true;
return;
}
ehci->scanning = true;
rescan:
ehci->need_rescan = false;
if (ehci->async_count)
scan_async(ehci);
if (ehci->intr_count > 0)
scan_intr(ehci);
if (ehci->isoc_count > 0)
scan_isoc(ehci);
if (ehci->need_rescan)
goto rescan;
ehci->scanning = false;
/* the IO watchdog guards against hardware or driver bugs that
* misplace IRQs, and should let us run completely without IRQs.
* such lossage has been observed on both VT6202 and VT8235.
*/
turn_on_io_watchdog(ehci);
}
/*
* Called when the ehci_hcd module is removed.
*/
static void ehci_stop (struct usb_hcd *hcd)
{
struct ehci_hcd *ehci = hcd_to_ehci (hcd);
ehci_dbg (ehci, "stop\n");
/* no more interrupts ... */
spin_lock_irq(&ehci->lock);
ehci->enabled_hrtimer_events = 0;
spin_unlock_irq(&ehci->lock);
ehci_quiesce(ehci);
ehci_silence_controller(ehci);
ehci_reset (ehci);
hrtimer_cancel(&ehci->hrtimer);
remove_sysfs_files(ehci);
remove_debug_files (ehci);
/* root hub is shut down separately (first, when possible) */
spin_lock_irq (&ehci->lock);
end_free_itds(ehci);
spin_unlock_irq (&ehci->lock);
ehci_mem_cleanup (ehci);
if (ehci->amd_pll_fix == 1)
usb_amd_dev_put();
#ifdef EHCI_STATS
ehci_dbg(ehci, "irq normal %ld err %ld iaa %ld (lost %ld)\n",
ehci->stats.normal, ehci->stats.error, ehci->stats.iaa,
ehci->stats.lost_iaa);
ehci_dbg (ehci, "complete %ld unlink %ld\n",
ehci->stats.complete, ehci->stats.unlink);
#endif
dbg_status (ehci, "ehci_stop completed",
ehci_readl(ehci, &ehci->regs->status));
}
/* one-time init, only for memory state */
static int ehci_init(struct usb_hcd *hcd)
{
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
u32 temp;
int retval;
u32 hcc_params;
struct ehci_qh_hw *hw;
spin_lock_init(&ehci->lock);
/*
* keep io watchdog by default, those good HCDs could turn off it later
*/
ehci->need_io_watchdog = 1;
hrtimer_init(&ehci->hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_ABS);
ehci->hrtimer.function = ehci_hrtimer_func;
ehci->next_hrtimer_event = EHCI_HRTIMER_NO_EVENT;
hcc_params = ehci_readl(ehci, &ehci->caps->hcc_params);
/*
* by default set standard 80% (== 100 usec/uframe) max periodic
* bandwidth as required by USB 2.0
*/
ehci->uframe_periodic_max = 100;
/*
* hw default: 1K periodic list heads, one per frame.
* periodic_size can shrink by USBCMD update if hcc_params allows.
*/
ehci->periodic_size = DEFAULT_I_TDPS;
INIT_LIST_HEAD(&ehci->intr_qh_list);
INIT_LIST_HEAD(&ehci->cached_itd_list);
INIT_LIST_HEAD(&ehci->cached_sitd_list);
if (HCC_PGM_FRAMELISTLEN(hcc_params)) {
/* periodic schedule size can be smaller than default */
switch (EHCI_TUNE_FLS) {
case 0: ehci->periodic_size = 1024; break;
case 1: ehci->periodic_size = 512; break;
case 2: ehci->periodic_size = 256; break;
default: BUG();
}
}
if ((retval = ehci_mem_init(ehci, GFP_KERNEL)) < 0)
return retval;
/* controllers may cache some of the periodic schedule ... */
if (HCC_ISOC_CACHE(hcc_params)) // full frame cache
ehci->i_thresh = 2 + 8;
else // N microframes cached
ehci->i_thresh = 2 + HCC_ISOC_THRES(hcc_params);
/*
* dedicate a qh for the async ring head, since we couldn't unlink
* a 'real' qh without stopping the async schedule [4.8]. use it
* as the 'reclamation list head' too.
* its dummy is used in hw_alt_next of many tds, to prevent the qh
* from automatically advancing to the next td after short reads.
*/
ehci->async->qh_next.qh = NULL;
hw = ehci->async->hw;
hw->hw_next = QH_NEXT(ehci, ehci->async->qh_dma);
hw->hw_info1 = cpu_to_hc32(ehci, QH_HEAD);
#if defined(CONFIG_PPC_PS3)
hw->hw_info1 |= cpu_to_hc32(ehci, QH_INACTIVATE);
#endif
hw->hw_token = cpu_to_hc32(ehci, QTD_STS_HALT);
hw->hw_qtd_next = EHCI_LIST_END(ehci);
ehci->async->qh_state = QH_STATE_LINKED;
hw->hw_alt_next = QTD_NEXT(ehci, ehci->async->dummy->qtd_dma);
/* clear interrupt enables, set irq latency */
if (log2_irq_thresh < 0 || log2_irq_thresh > 6)
log2_irq_thresh = 0;
temp = 1 << (16 + log2_irq_thresh);
if (HCC_PER_PORT_CHANGE_EVENT(hcc_params)) {
ehci->has_ppcd = 1;
ehci_dbg(ehci, "enable per-port change event\n");
temp |= CMD_PPCEE;
}
if (HCC_CANPARK(hcc_params)) {
/* HW default park == 3, on hardware that supports it (like
* NVidia and ALI silicon), maximizes throughput on the async
* schedule by avoiding QH fetches between transfers.
*
* With fast usb storage devices and NForce2, "park" seems to
* make problems: throughput reduction (!), data errors...
*/
if (park) {
park = min(park, (unsigned) 3);
temp |= CMD_PARK;
temp |= park << 8;
}
ehci_dbg(ehci, "park %d\n", park);
}
if (HCC_PGM_FRAMELISTLEN(hcc_params)) {
/* periodic schedule size can be smaller than default */
temp &= ~(3 << 2);
temp |= (EHCI_TUNE_FLS << 2);
}
if (HCC_LPM(hcc_params)) {
/* support link power management EHCI 1.1 addendum */
ehci_dbg(ehci, "support lpm\n");
ehci->has_lpm = 1;
if (hird > 0xf) {
ehci_dbg(ehci, "hird %d invalid, use default 0",
hird);
hird = 0;
}
temp |= hird << 24;
}
ehci->command = temp;
/* Accept arbitrarily long scatter-gather lists */
if (!(hcd->driver->flags & HCD_LOCAL_MEM))
hcd->self.sg_tablesize = ~0;
return 0;
}
/* start HC running; it's halted, ehci_init() has been run (once) */
static int ehci_run (struct usb_hcd *hcd)
{
struct ehci_hcd *ehci = hcd_to_ehci (hcd);
u32 temp;
u32 hcc_params;
hcd->uses_new_polling = 1;
/* EHCI spec section 4.1 */
ehci_writel(ehci, ehci->periodic_dma, &ehci->regs->frame_list);
ehci_writel(ehci, (u32)ehci->async->qh_dma, &ehci->regs->async_next);
/*
* hcc_params controls whether ehci->regs->segment must (!!!)
* be used; it constrains QH/ITD/SITD and QTD locations.
* pci_pool consistent memory always uses segment zero.
* streaming mappings for I/O buffers, like pci_map_single(),
* can return segments above 4GB, if the device allows.
*
* NOTE: the dma mask is visible through dma_supported(), so
* drivers can pass this info along ... like NETIF_F_HIGHDMA,
* Scsi_Host.highmem_io, and so forth. It's readonly to all
* host side drivers though.
*/
hcc_params = ehci_readl(ehci, &ehci->caps->hcc_params);
if (HCC_64BIT_ADDR(hcc_params)) {
ehci_writel(ehci, 0, &ehci->regs->segment);
#if 0
// this is deeply broken on almost all architectures
if (!dma_set_mask(hcd->self.controller, DMA_BIT_MASK(64)))
ehci_info(ehci, "enabled 64bit DMA\n");
#endif
}
// Philips, Intel, and maybe others need CMD_RUN before the
// root hub will detect new devices (why?); NEC doesn't
ehci->command &= ~(CMD_LRESET|CMD_IAAD|CMD_PSE|CMD_ASE|CMD_RESET);
ehci->command |= CMD_RUN;
ehci_writel(ehci, ehci->command, &ehci->regs->command);
dbg_cmd (ehci, "init", ehci->command);
/*
* Start, enabling full USB 2.0 functionality ... usb 1.1 devices
* are explicitly handed to companion controller(s), so no TT is
* involved with the root hub. (Except where one is integrated,
* and there's no companion controller unless maybe for USB OTG.)
*
* Turning on the CF flag will transfer ownership of all ports
* from the companions to the EHCI controller. If any of the
* companions are in the middle of a port reset at the time, it
* could cause trouble. Write-locking ehci_cf_port_reset_rwsem
* guarantees that no resets are in progress. After we set CF,
* a short delay lets the hardware catch up; new resets shouldn't
* be started before the port switching actions could complete.
*/
down_write(&ehci_cf_port_reset_rwsem);
ehci->rh_state = EHCI_RH_RUNNING;
ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag);
ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */
msleep(5);
up_write(&ehci_cf_port_reset_rwsem);
ehci->last_periodic_enable = ktime_get_real();
temp = HC_VERSION(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase));
ehci_info (ehci,
"USB %x.%x started, EHCI %x.%02x%s\n",
((ehci->sbrn & 0xf0)>>4), (ehci->sbrn & 0x0f),
temp >> 8, temp & 0xff,
ignore_oc ? ", overcurrent ignored" : "");
ehci_writel(ehci, INTR_MASK,
&ehci->regs->intr_enable); /* Turn On Interrupts */
/* GRR this is run-once init(), being done every time the HC starts.
* So long as they're part of class devices, we can't do it init()
* since the class device isn't created that early.
*/
create_debug_files(ehci);
create_sysfs_files(ehci);
return 0;
}
static int ehci_setup(struct usb_hcd *hcd)
{
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
int retval;
ehci->regs = (void __iomem *)ehci->caps +
HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase));
dbg_hcs_params(ehci, "reset");
dbg_hcc_params(ehci, "reset");
/* cache this readonly data; minimize chip reads */
ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
ehci->sbrn = HCD_USB2;
/* data structure init */
retval = ehci_init(hcd);
if (retval)
return retval;
retval = ehci_halt(ehci);
if (retval)
return retval;
if (ehci_is_TDI(ehci))
tdi_reset(ehci);
ehci_reset(ehci);
return 0;
}
/*-------------------------------------------------------------------------*/
static irqreturn_t ehci_irq (struct usb_hcd *hcd)
{
struct ehci_hcd *ehci = hcd_to_ehci (hcd);
u32 status, masked_status, pcd_status = 0, cmd;
int bh;
spin_lock (&ehci->lock);
status = ehci_readl(ehci, &ehci->regs->status);
/* e.g. cardbus physical eject */
if (status == ~(u32) 0) {
ehci_dbg (ehci, "device removed\n");
goto dead;
}
/*
* We don't use STS_FLR, but some controllers don't like it to
* remain on, so mask it out along with the other status bits.
*/
masked_status = status & (INTR_MASK | STS_FLR);
/* Shared IRQ? */
if (!masked_status || unlikely(ehci->rh_state == EHCI_RH_HALTED)) {
spin_unlock(&ehci->lock);
return IRQ_NONE;
}
/* clear (just) interrupts */
ehci_writel(ehci, masked_status, &ehci->regs->status);
cmd = ehci_readl(ehci, &ehci->regs->command);
bh = 0;
#ifdef VERBOSE_DEBUG
/* unrequested/ignored: Frame List Rollover */
dbg_status (ehci, "irq", status);
#endif
/* INT, ERR, and IAA interrupt rates can be throttled */
/* normal [4.15.1.2] or error [4.15.1.1] completion */
if (likely ((status & (STS_INT|STS_ERR)) != 0)) {
if (likely ((status & STS_ERR) == 0))
COUNT (ehci->stats.normal);
else
COUNT (ehci->stats.error);
bh = 1;
}
/* complete the unlinking of some qh [4.15.2.3] */
if (status & STS_IAA) {
/* Turn off the IAA watchdog */
ehci->enabled_hrtimer_events &= ~BIT(EHCI_HRTIMER_IAA_WATCHDOG);
/*
* Mild optimization: Allow another IAAD to reset the
* hrtimer, if one occurs before the next expiration.
* In theory we could always cancel the hrtimer, but
* tests show that about half the time it will be reset
* for some other event anyway.
*/
if (ehci->next_hrtimer_event == EHCI_HRTIMER_IAA_WATCHDOG)
++ehci->next_hrtimer_event;
/* guard against (alleged) silicon errata */
if (cmd & CMD_IAAD)
ehci_dbg(ehci, "IAA with IAAD still set?\n");
if (ehci->async_iaa) {
COUNT(ehci->stats.iaa);
end_unlink_async(ehci);
} else
ehci_dbg(ehci, "IAA with nothing unlinked?\n");
}
/* remote wakeup [4.3.1] */
if (status & STS_PCD) {
unsigned i = HCS_N_PORTS (ehci->hcs_params);
u32 ppcd = 0;
/* kick root hub later */
pcd_status = status;
/* resume root hub? */
if (ehci->rh_state == EHCI_RH_SUSPENDED)
usb_hcd_resume_root_hub(hcd);
/* get per-port change detect bits */
if (ehci->has_ppcd)
ppcd = status >> 16;
while (i--) {
int pstatus;
/* leverage per-port change bits feature */
if (ehci->has_ppcd && !(ppcd & (1 << i)))
continue;
pstatus = ehci_readl(ehci,
&ehci->regs->port_status[i]);
if (pstatus & PORT_OWNER)
continue;
if (!(test_bit(i, &ehci->suspended_ports) &&
((pstatus & PORT_RESUME) ||
!(pstatus & PORT_SUSPEND)) &&
(pstatus & PORT_PE) &&
ehci->reset_done[i] == 0))
continue;
/* start 20 msec resume signaling from this port,
* and make khubd collect PORT_STAT_C_SUSPEND to
* stop that signaling. Use 5 ms extra for safety,
* like usb_port_resume() does.
*/
ehci->reset_done[i] = jiffies + msecs_to_jiffies(25);
set_bit(i, &ehci->resuming_ports);
ehci_dbg (ehci, "port %d remote wakeup\n", i + 1);
mod_timer(&hcd->rh_timer, ehci->reset_done[i]);
}
}
/* PCI errors [4.15.2.4] */
if (unlikely ((status & STS_FATAL) != 0)) {
ehci_err(ehci, "fatal error\n");
dbg_cmd(ehci, "fatal", cmd);
dbg_status(ehci, "fatal", status);
dead:
usb_hc_died(hcd);
/* Don't let the controller do anything more */
ehci->shutdown = true;
ehci->rh_state = EHCI_RH_STOPPING;
ehci->command &= ~(CMD_RUN | CMD_ASE | CMD_PSE);
ehci_writel(ehci, ehci->command, &ehci->regs->command);
ehci_writel(ehci, 0, &ehci->regs->intr_enable);
ehci_handle_controller_death(ehci);
/* Handle completions when the controller stops */
bh = 0;
}
if (bh)
ehci_work (ehci);
spin_unlock (&ehci->lock);
if (pcd_status)
usb_hcd_poll_rh_status(hcd);
return IRQ_HANDLED;
}
/*-------------------------------------------------------------------------*/
/*
* non-error returns are a promise to giveback() the urb later
* we drop ownership so next owner (or urb unlink) can get it
*
* urb + dev is in hcd.self.controller.urb_list
* we're queueing TDs onto software and hardware lists
*
* hcd-specific init for hcpriv hasn't been done yet
*
* NOTE: control, bulk, and interrupt share the same code to append TDs
* to a (possibly active) QH, and the same QH scanning code.
*/
static int ehci_urb_enqueue (
struct usb_hcd *hcd,
struct urb *urb,
gfp_t mem_flags
) {
struct ehci_hcd *ehci = hcd_to_ehci (hcd);
struct list_head qtd_list;
INIT_LIST_HEAD (&qtd_list);
switch (usb_pipetype (urb->pipe)) {
case PIPE_CONTROL:
/* qh_completions() code doesn't handle all the fault cases
* in multi-TD control transfers. Even 1KB is rare anyway.
*/
if (urb->transfer_buffer_length > (16 * 1024))
return -EMSGSIZE;
/* FALLTHROUGH */
/* case PIPE_BULK: */
default:
if (!qh_urb_transaction (ehci, urb, &qtd_list, mem_flags))
return -ENOMEM;
return submit_async(ehci, urb, &qtd_list, mem_flags);
case PIPE_INTERRUPT:
if (!qh_urb_transaction (ehci, urb, &qtd_list, mem_flags))
return -ENOMEM;
return intr_submit(ehci, urb, &qtd_list, mem_flags);
case PIPE_ISOCHRONOUS:
if (urb->dev->speed == USB_SPEED_HIGH)
return itd_submit (ehci, urb, mem_flags);
else
return sitd_submit (ehci, urb, mem_flags);
}
}
/* remove from hardware lists
* completions normally happen asynchronously
*/
static int ehci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
{
struct ehci_hcd *ehci = hcd_to_ehci (hcd);
struct ehci_qh *qh;
unsigned long flags;
int rc;
spin_lock_irqsave (&ehci->lock, flags);
rc = usb_hcd_check_unlink_urb(hcd, urb, status);
if (rc)
goto done;
switch (usb_pipetype (urb->pipe)) {
// case PIPE_CONTROL:
// case PIPE_BULK:
default:
qh = (struct ehci_qh *) urb->hcpriv;
if (!qh)
break;
switch (qh->qh_state) {
case QH_STATE_LINKED:
case QH_STATE_COMPLETING:
start_unlink_async(ehci, qh);
break;
case QH_STATE_UNLINK:
case QH_STATE_UNLINK_WAIT:
/* already started */
break;
case QH_STATE_IDLE:
/* QH might be waiting for a Clear-TT-Buffer */
qh_completions(ehci, qh);
break;
}
break;
case PIPE_INTERRUPT:
qh = (struct ehci_qh *) urb->hcpriv;
if (!qh)
break;
switch (qh->qh_state) {
case QH_STATE_LINKED:
case QH_STATE_COMPLETING:
start_unlink_intr(ehci, qh);
break;
case QH_STATE_IDLE:
qh_completions (ehci, qh);
break;
default:
ehci_dbg (ehci, "bogus qh %p state %d\n",
qh, qh->qh_state);
goto done;
}
break;
case PIPE_ISOCHRONOUS:
// itd or sitd ...
// wait till next completion, do it then.
// completion irqs can wait up to 1024 msec,
break;
}
done:
spin_unlock_irqrestore (&ehci->lock, flags);
return rc;
}
/*-------------------------------------------------------------------------*/
// bulk qh holds the data toggle
static void
ehci_endpoint_disable (struct usb_hcd *hcd, struct usb_host_endpoint *ep)
{
struct ehci_hcd *ehci = hcd_to_ehci (hcd);
unsigned long flags;
struct ehci_qh *qh, *tmp;
/* ASSERT: any requests/urbs are being unlinked */
/* ASSERT: nobody can be submitting urbs for this any more */
rescan:
spin_lock_irqsave (&ehci->lock, flags);
qh = ep->hcpriv;
if (!qh)
goto done;
/* endpoints can be iso streams. for now, we don't
* accelerate iso completions ... so spin a while.
*/
if (qh->hw == NULL) {
struct ehci_iso_stream *stream = ep->hcpriv;
if (!list_empty(&stream->td_list))
goto idle_timeout;
/* BUG_ON(!list_empty(&stream->free_list)); */
kfree(stream);
goto done;
}
if (ehci->rh_state < EHCI_RH_RUNNING)
qh->qh_state = QH_STATE_IDLE;
switch (qh->qh_state) {
case QH_STATE_LINKED:
case QH_STATE_COMPLETING:
for (tmp = ehci->async->qh_next.qh;
tmp && tmp != qh;
tmp = tmp->qh_next.qh)
continue;
/* periodic qh self-unlinks on empty, and a COMPLETING qh
* may already be unlinked.
*/
if (tmp)
start_unlink_async(ehci, qh);
/* FALL THROUGH */
case QH_STATE_UNLINK: /* wait for hw to finish? */
case QH_STATE_UNLINK_WAIT:
idle_timeout:
spin_unlock_irqrestore (&ehci->lock, flags);
schedule_timeout_uninterruptible(1);
goto rescan;
case QH_STATE_IDLE: /* fully unlinked */
if (qh->clearing_tt)
goto idle_timeout;
if (list_empty (&qh->qtd_list)) {
qh_destroy(ehci, qh);
break;
}
/* else FALL THROUGH */
default:
/* caller was supposed to have unlinked any requests;
* that's not our job. just leak this memory.
*/
ehci_err (ehci, "qh %p (#%02x) state %d%s\n",
qh, ep->desc.bEndpointAddress, qh->qh_state,
list_empty (&qh->qtd_list) ? "" : "(has tds)");
break;
}
done:
ep->hcpriv = NULL;
spin_unlock_irqrestore (&ehci->lock, flags);
}
static void
ehci_endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep)
{
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
struct ehci_qh *qh;
int eptype = usb_endpoint_type(&ep->desc);
int epnum = usb_endpoint_num(&ep->desc);
int is_out = usb_endpoint_dir_out(&ep->desc);
unsigned long flags;
if (eptype != USB_ENDPOINT_XFER_BULK && eptype != USB_ENDPOINT_XFER_INT)
return;
spin_lock_irqsave(&ehci->lock, flags);
qh = ep->hcpriv;
/* For Bulk and Interrupt endpoints we maintain the toggle state
* in the hardware; the toggle bits in udev aren't used at all.
* When an endpoint is reset by usb_clear_halt() we must reset
* the toggle bit in the QH.
*/
if (qh) {
usb_settoggle(qh->dev, epnum, is_out, 0);
if (!list_empty(&qh->qtd_list)) {
WARN_ONCE(1, "clear_halt for a busy endpoint\n");
} else if (qh->qh_state == QH_STATE_LINKED ||
qh->qh_state == QH_STATE_COMPLETING) {
/* The toggle value in the QH can't be updated
* while the QH is active. Unlink it now;
* re-linking will call qh_refresh().
*/
if (eptype == USB_ENDPOINT_XFER_BULK)
start_unlink_async(ehci, qh);
else
start_unlink_intr(ehci, qh);
}
}
spin_unlock_irqrestore(&ehci->lock, flags);
}
static int ehci_get_frame (struct usb_hcd *hcd)
{
struct ehci_hcd *ehci = hcd_to_ehci (hcd);
return (ehci_read_frame_index(ehci) >> 3) % ehci->periodic_size;
}
/*-------------------------------------------------------------------------*/
#ifdef CONFIG_PM
/* suspend/resume, section 4.3 */
/* These routines handle the generic parts of controller suspend/resume */
static int __maybe_unused ehci_suspend(struct usb_hcd *hcd, bool do_wakeup)
{
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
if (time_before(jiffies, ehci->next_statechange))
msleep(10);
/*
* Root hub was already suspended. Disable IRQ emission and
* mark HW unaccessible. The PM and USB cores make sure that
* the root hub is either suspended or stopped.
*/
ehci_prepare_ports_for_controller_suspend(ehci, do_wakeup);
spin_lock_irq(&ehci->lock);
ehci_writel(ehci, 0, &ehci->regs->intr_enable);
(void) ehci_readl(ehci, &ehci->regs->intr_enable);
clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
spin_unlock_irq(&ehci->lock);
return 0;
}
/* Returns 0 if power was preserved, 1 if power was lost */
static int __maybe_unused ehci_resume(struct usb_hcd *hcd, bool hibernated)
{
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
if (time_before(jiffies, ehci->next_statechange))
msleep(100);
/* Mark hardware accessible again as we are back to full power by now */
set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
if (ehci->shutdown)
return 0; /* Controller is dead */
/*
* If CF is still set and we aren't resuming from hibernation
* then we maintained suspend power.
* Just undo the effect of ehci_suspend().
*/
if (ehci_readl(ehci, &ehci->regs->configured_flag) == FLAG_CF &&
!hibernated) {
int mask = INTR_MASK;
ehci_prepare_ports_for_controller_resume(ehci);
spin_lock_irq(&ehci->lock);
if (ehci->shutdown)
goto skip;
if (!hcd->self.root_hub->do_remote_wakeup)
mask &= ~STS_PCD;
ehci_writel(ehci, mask, &ehci->regs->intr_enable);
ehci_readl(ehci, &ehci->regs->intr_enable);
skip:
spin_unlock_irq(&ehci->lock);
return 0;
}
/*
* Else reset, to cope with power loss or resume from hibernation
* having let the firmware kick in during reboot.
*/
usb_root_hub_lost_power(hcd->self.root_hub);
(void) ehci_halt(ehci);
(void) ehci_reset(ehci);
spin_lock_irq(&ehci->lock);
if (ehci->shutdown)
goto skip;
ehci_writel(ehci, ehci->command, &ehci->regs->command);
ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag);
ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */
ehci->rh_state = EHCI_RH_SUSPENDED;
spin_unlock_irq(&ehci->lock);
/* here we "know" root ports should always stay powered */
ehci_port_power(ehci, 1);
return 1;
}
#endif
/*-------------------------------------------------------------------------*/
/*
* The EHCI in ChipIdea HDRC cannot be a separate module or device,
* because its registers (and irq) are shared between host/gadget/otg
* functions and in order to facilitate role switching we cannot
* give the ehci driver exclusive access to those.
*/
#ifndef CHIPIDEA_EHCI
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_AUTHOR (DRIVER_AUTHOR);
MODULE_LICENSE ("GPL");
#ifdef CONFIG_PCI
#include "ehci-pci.c"
#define PCI_DRIVER ehci_pci_driver
#endif
#ifdef CONFIG_USB_EHCI_FSL
#include "ehci-fsl.c"
#define PLATFORM_DRIVER ehci_fsl_driver
#endif
#ifdef CONFIG_USB_EHCI_MXC
#include "ehci-mxc.c"
#define PLATFORM_DRIVER ehci_mxc_driver
#endif
#ifdef CONFIG_USB_EHCI_SH
#include "ehci-sh.c"
#define PLATFORM_DRIVER ehci_hcd_sh_driver
#endif
#ifdef CONFIG_MIPS_ALCHEMY
#include "ehci-au1xxx.c"
#define PLATFORM_DRIVER ehci_hcd_au1xxx_driver
#endif
#ifdef CONFIG_USB_EHCI_HCD_OMAP
#include "ehci-omap.c"
#define PLATFORM_DRIVER ehci_hcd_omap_driver
#endif
#ifdef CONFIG_PPC_PS3
#include "ehci-ps3.c"
#define PS3_SYSTEM_BUS_DRIVER ps3_ehci_driver
#endif
#ifdef CONFIG_USB_EHCI_HCD_PPC_OF
#include "ehci-ppc-of.c"
#define OF_PLATFORM_DRIVER ehci_hcd_ppc_of_driver
#endif
#ifdef CONFIG_XPS_USB_HCD_XILINX
#include "ehci-xilinx-of.c"
#define XILINX_OF_PLATFORM_DRIVER ehci_hcd_xilinx_of_driver
#endif
#ifdef CONFIG_PLAT_ORION
#include "ehci-orion.c"
#define PLATFORM_DRIVER ehci_orion_driver
#endif
#ifdef CONFIG_ARCH_IXP4XX
#include "ehci-ixp4xx.c"
#define PLATFORM_DRIVER ixp4xx_ehci_driver
#endif
#ifdef CONFIG_USB_W90X900_EHCI
#include "ehci-w90x900.c"
#define PLATFORM_DRIVER ehci_hcd_w90x900_driver
#endif
#ifdef CONFIG_ARCH_AT91
#include "ehci-atmel.c"
#define PLATFORM_DRIVER ehci_atmel_driver
#endif
#ifdef CONFIG_USB_OCTEON_EHCI
#include "ehci-octeon.c"
#define PLATFORM_DRIVER ehci_octeon_driver
#endif
#ifdef CONFIG_USB_CNS3XXX_EHCI
#include "ehci-cns3xxx.c"
#define PLATFORM_DRIVER cns3xxx_ehci_driver
#endif
#ifdef CONFIG_ARCH_VT8500
#include "ehci-vt8500.c"
#define PLATFORM_DRIVER vt8500_ehci_driver
#endif
#ifdef CONFIG_PLAT_SPEAR
#include "ehci-spear.c"
#define PLATFORM_DRIVER spear_ehci_hcd_driver
#endif
#ifdef CONFIG_USB_EHCI_MSM
#include "ehci-msm.c"
#define PLATFORM_DRIVER ehci_msm_driver
#endif
#ifdef CONFIG_TILE_USB
#include "ehci-tilegx.c"
#define PLATFORM_DRIVER ehci_hcd_tilegx_driver
#endif
#ifdef CONFIG_USB_EHCI_HCD_PMC_MSP
#include "ehci-pmcmsp.c"
#define PLATFORM_DRIVER ehci_hcd_msp_driver
#endif
#ifdef CONFIG_USB_EHCI_TEGRA
#include "ehci-tegra.c"
#define PLATFORM_DRIVER tegra_ehci_driver
#endif
#ifdef CONFIG_USB_EHCI_S5P
#include "ehci-s5p.c"
#define PLATFORM_DRIVER s5p_ehci_driver
#endif
#ifdef CONFIG_SPARC_LEON
#include "ehci-grlib.c"
#define PLATFORM_DRIVER ehci_grlib_driver
#endif
#ifdef CONFIG_CPU_XLR
#include "ehci-xls.c"
#define PLATFORM_DRIVER ehci_xls_driver
#endif
#ifdef CONFIG_USB_EHCI_MV
#include "ehci-mv.c"
#define PLATFORM_DRIVER ehci_mv_driver
#endif
#ifdef CONFIG_MACH_LOONGSON1
#include "ehci-ls1x.c"
#define PLATFORM_DRIVER ehci_ls1x_driver
#endif
#ifdef CONFIG_MIPS_SEAD3
#include "ehci-sead3.c"
#define PLATFORM_DRIVER ehci_hcd_sead3_driver
#endif
#ifdef CONFIG_USB_EHCI_HCD_PLATFORM
#include "ehci-platform.c"
#define PLATFORM_DRIVER ehci_platform_driver
#endif
#if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
!defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \
!defined(XILINX_OF_PLATFORM_DRIVER)
#error "missing bus glue for ehci-hcd"
#endif
static int __init ehci_hcd_init(void)
{
int retval = 0;
if (usb_disabled())
return -ENODEV;
printk(KERN_INFO "%s: " DRIVER_DESC "\n", hcd_name);
set_bit(USB_EHCI_LOADED, &usb_hcds_loaded);
if (test_bit(USB_UHCI_LOADED, &usb_hcds_loaded) ||
test_bit(USB_OHCI_LOADED, &usb_hcds_loaded))
printk(KERN_WARNING "Warning! ehci_hcd should always be loaded"
" before uhci_hcd and ohci_hcd, not after\n");
pr_debug("%s: block sizes: qh %Zd qtd %Zd itd %Zd sitd %Zd\n",
hcd_name,
sizeof(struct ehci_qh), sizeof(struct ehci_qtd),
sizeof(struct ehci_itd), sizeof(struct ehci_sitd));
#ifdef DEBUG
ehci_debug_root = debugfs_create_dir("ehci", usb_debug_root);
if (!ehci_debug_root) {
retval = -ENOENT;
goto err_debug;
}
#endif
#ifdef PLATFORM_DRIVER
retval = platform_driver_register(&PLATFORM_DRIVER);
if (retval < 0)
goto clean0;
#endif
#ifdef PCI_DRIVER
retval = pci_register_driver(&PCI_DRIVER);
if (retval < 0)
goto clean1;
#endif
#ifdef PS3_SYSTEM_BUS_DRIVER
retval = ps3_ehci_driver_register(&PS3_SYSTEM_BUS_DRIVER);
if (retval < 0)
goto clean2;
#endif
#ifdef OF_PLATFORM_DRIVER
retval = platform_driver_register(&OF_PLATFORM_DRIVER);
if (retval < 0)
goto clean3;
#endif
#ifdef XILINX_OF_PLATFORM_DRIVER
retval = platform_driver_register(&XILINX_OF_PLATFORM_DRIVER);
if (retval < 0)
goto clean4;
#endif
return retval;
#ifdef XILINX_OF_PLATFORM_DRIVER
/* platform_driver_unregister(&XILINX_OF_PLATFORM_DRIVER); */
clean4:
#endif
#ifdef OF_PLATFORM_DRIVER
platform_driver_unregister(&OF_PLATFORM_DRIVER);
clean3:
#endif
#ifdef PS3_SYSTEM_BUS_DRIVER
ps3_ehci_driver_unregister(&PS3_SYSTEM_BUS_DRIVER);
clean2:
#endif
#ifdef PCI_DRIVER
pci_unregister_driver(&PCI_DRIVER);
clean1:
#endif
#ifdef PLATFORM_DRIVER
platform_driver_unregister(&PLATFORM_DRIVER);
clean0:
#endif
#ifdef DEBUG
debugfs_remove(ehci_debug_root);
ehci_debug_root = NULL;
err_debug:
#endif
clear_bit(USB_EHCI_LOADED, &usb_hcds_loaded);
return retval;
}
module_init(ehci_hcd_init);
static void __exit ehci_hcd_cleanup(void)
{
#ifdef XILINX_OF_PLATFORM_DRIVER
platform_driver_unregister(&XILINX_OF_PLATFORM_DRIVER);
#endif
#ifdef OF_PLATFORM_DRIVER
platform_driver_unregister(&OF_PLATFORM_DRIVER);
#endif
#ifdef PLATFORM_DRIVER
platform_driver_unregister(&PLATFORM_DRIVER);
#endif
#ifdef PCI_DRIVER
pci_unregister_driver(&PCI_DRIVER);
#endif
#ifdef PS3_SYSTEM_BUS_DRIVER
ps3_ehci_driver_unregister(&PS3_SYSTEM_BUS_DRIVER);
#endif
#ifdef DEBUG
debugfs_remove(ehci_debug_root);
#endif
clear_bit(USB_EHCI_LOADED, &usb_hcds_loaded);
}
module_exit(ehci_hcd_cleanup);
#endif /* CHIPIDEA_EHCI */
Reference in New Issue View Git Blame Copy Permalink