mirror of
https://github.com/torvalds/linux.git
synced 2024-09-29 03:13:05 +00:00
c42edfe382
This attribute can be used to set and read the value and the mask of the skb mark which will be used to classify the source non-mesh client as ISOLATED. In this way a client can be advertised as such and the mark can potentially be restored at the receiving node before delivering the skb. This can be helpful for creating network wide netfilter policies. This sysfs file expects a string of the shape "$mark/$mask". Where $mark has to be a 32-bit number in any base, while $mask must be a 32bit mask expressed in hex base. Only bits in $mark covered by the bitmask are really stored. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
100 lines
4.0 KiB
Plaintext
100 lines
4.0 KiB
Plaintext
|
|
What: /sys/class/net/<mesh_iface>/mesh/aggregated_ogms
|
|
Date: May 2010
|
|
Contact: Marek Lindner <mareklindner@neomailbox.ch>
|
|
Description:
|
|
Indicates whether the batman protocol messages of the
|
|
mesh <mesh_iface> shall be aggregated or not.
|
|
|
|
What: /sys/class/net/<mesh_iface>/mesh/<vlan_subdir>/ap_isolation
|
|
Date: May 2011
|
|
Contact: Antonio Quartulli <antonio@meshcoding.com>
|
|
Description:
|
|
Indicates whether the data traffic going from a
|
|
wireless client to another wireless client will be
|
|
silently dropped. <vlan_subdir> is empty when referring
|
|
to the untagged lan.
|
|
|
|
What: /sys/class/net/<mesh_iface>/mesh/bonding
|
|
Date: June 2010
|
|
Contact: Simon Wunderlich <sw@simonwunderlich.de>
|
|
Description:
|
|
Indicates whether the data traffic going through the
|
|
mesh will be sent using multiple interfaces at the
|
|
same time (if available).
|
|
|
|
What: /sys/class/net/<mesh_iface>/mesh/bridge_loop_avoidance
|
|
Date: November 2011
|
|
Contact: Simon Wunderlich <sw@simonwunderlich.de>
|
|
Description:
|
|
Indicates whether the bridge loop avoidance feature
|
|
is enabled. This feature detects and avoids loops
|
|
between the mesh and devices bridged with the soft
|
|
interface <mesh_iface>.
|
|
|
|
What: /sys/class/net/<mesh_iface>/mesh/fragmentation
|
|
Date: October 2010
|
|
Contact: Andreas Langer <an.langer@gmx.de>
|
|
Description:
|
|
Indicates whether the data traffic going through the
|
|
mesh will be fragmented or silently discarded if the
|
|
packet size exceeds the outgoing interface MTU.
|
|
|
|
What: /sys/class/net/<mesh_iface>/mesh/gw_bandwidth
|
|
Date: October 2010
|
|
Contact: Marek Lindner <mareklindner@neomailbox.ch>
|
|
Description:
|
|
Defines the bandwidth which is propagated by this
|
|
node if gw_mode was set to 'server'.
|
|
|
|
What: /sys/class/net/<mesh_iface>/mesh/gw_mode
|
|
Date: October 2010
|
|
Contact: Marek Lindner <mareklindner@neomailbox.ch>
|
|
Description:
|
|
Defines the state of the gateway features. Can be
|
|
either 'off', 'client' or 'server'.
|
|
|
|
What: /sys/class/net/<mesh_iface>/mesh/gw_sel_class
|
|
Date: October 2010
|
|
Contact: Marek Lindner <mareklindner@neomailbox.ch>
|
|
Description:
|
|
Defines the selection criteria this node will use
|
|
to choose a gateway if gw_mode was set to 'client'.
|
|
|
|
What: /sys/class/net/<mesh_iface>/mesh/hop_penalty
|
|
Date: Oct 2010
|
|
Contact: Linus Lüssing <linus.luessing@web.de>
|
|
Description:
|
|
Defines the penalty which will be applied to an
|
|
originator message's tq-field on every hop.
|
|
|
|
What: /sys/class/net/<mesh_iface>/mesh/isolation_mark
|
|
Date: Nov 2013
|
|
Contact: Antonio Quartulli <antonio@meshcoding.com>
|
|
Description:
|
|
Defines the isolation mark (and its bitmask) which
|
|
is used to classify clients as "isolated" by the
|
|
Extended Isolation feature.
|
|
|
|
What: /sys/class/net/<mesh_iface>/mesh/network_coding
|
|
Date: Nov 2012
|
|
Contact: Martin Hundeboll <martin@hundeboll.net>
|
|
Description:
|
|
Controls whether Network Coding (using some magic
|
|
to send fewer wifi packets but still the same
|
|
content) is enabled or not.
|
|
|
|
What: /sys/class/net/<mesh_iface>/mesh/orig_interval
|
|
Date: May 2010
|
|
Contact: Marek Lindner <mareklindner@neomailbox.ch>
|
|
Description:
|
|
Defines the interval in milliseconds in which batman
|
|
sends its protocol messages.
|
|
|
|
What: /sys/class/net/<mesh_iface>/mesh/routing_algo
|
|
Date: Dec 2011
|
|
Contact: Marek Lindner <mareklindner@neomailbox.ch>
|
|
Description:
|
|
Defines the routing procotol this mesh instance
|
|
uses to find the optimal paths through the mesh.
|