linux/arch/arm/mach-sa1100/jornada720_ssp.c
Thomas Gleixner d2912cb15b treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19 17:09:55 +02:00

201 lines
4.3 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/**
* arch/arm/mac-sa1100/jornada720_ssp.c
*
* Copyright (C) 2006/2007 Kristoffer Ericson <Kristoffer.Ericson@gmail.com>
* Copyright (C) 2006 Filip Zyzniewski <filip.zyzniewski@tefnet.pl>
*
* SSP driver for the HP Jornada 710/720/728
*/
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/sched.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <mach/jornada720.h>
#include <asm/hardware/ssp.h>
static DEFINE_SPINLOCK(jornada_ssp_lock);
static unsigned long jornada_ssp_flags;
/**
* jornada_ssp_reverse - reverses input byte
*
* we need to reverse all data we receive from the mcu due to its physical location
* returns : 01110111 -> 11101110
*/
inline u8 jornada_ssp_reverse(u8 byte)
{
return
((0x80 & byte) >> 7) |
((0x40 & byte) >> 5) |
((0x20 & byte) >> 3) |
((0x10 & byte) >> 1) |
((0x08 & byte) << 1) |
((0x04 & byte) << 3) |
((0x02 & byte) << 5) |
((0x01 & byte) << 7);
};
EXPORT_SYMBOL(jornada_ssp_reverse);
/**
* jornada_ssp_byte - waits for ready ssp bus and sends byte
*
* waits for fifo buffer to clear and then transmits, if it doesn't then we will
* timeout after <timeout> rounds. Needs mcu running before its called.
*
* returns : %mcu output on success
* : %-ETIMEDOUT on timeout
*/
int jornada_ssp_byte(u8 byte)
{
int timeout = 400000;
u16 ret;
while ((GPLR & GPIO_GPIO10)) {
if (!--timeout) {
printk(KERN_WARNING "SSP: timeout while waiting for transmit\n");
return -ETIMEDOUT;
}
cpu_relax();
}
ret = jornada_ssp_reverse(byte) << 8;
ssp_write_word(ret);
ssp_read_word(&ret);
return jornada_ssp_reverse(ret);
};
EXPORT_SYMBOL(jornada_ssp_byte);
/**
* jornada_ssp_inout - decide if input is command or trading byte
*
* returns : (jornada_ssp_byte(byte)) on success
* : %-ETIMEDOUT on timeout failure
*/
int jornada_ssp_inout(u8 byte)
{
int ret, i;
/* true means command byte */
if (byte != TXDUMMY) {
ret = jornada_ssp_byte(byte);
/* Proper return to commands is TxDummy */
if (ret != TXDUMMY) {
for (i = 0; i < 256; i++)/* flushing bus */
if (jornada_ssp_byte(TXDUMMY) == -1)
break;
return -ETIMEDOUT;
}
} else /* Exchange TxDummy for data */
ret = jornada_ssp_byte(TXDUMMY);
return ret;
};
EXPORT_SYMBOL(jornada_ssp_inout);
/**
* jornada_ssp_start - enable mcu
*
*/
void jornada_ssp_start(void)
{
spin_lock_irqsave(&jornada_ssp_lock, jornada_ssp_flags);
GPCR = GPIO_GPIO25;
udelay(50);
return;
};
EXPORT_SYMBOL(jornada_ssp_start);
/**
* jornada_ssp_end - disable mcu and turn off lock
*
*/
void jornada_ssp_end(void)
{
GPSR = GPIO_GPIO25;
spin_unlock_irqrestore(&jornada_ssp_lock, jornada_ssp_flags);
return;
};
EXPORT_SYMBOL(jornada_ssp_end);
static int jornada_ssp_probe(struct platform_device *dev)
{
int ret;
GPSR = GPIO_GPIO25;
ret = ssp_init();
/* worked fine, lets not bother with anything else */
if (!ret) {
printk(KERN_INFO "SSP: device initialized with irq\n");
return ret;
}
printk(KERN_WARNING "SSP: initialization failed, trying non-irq solution \n");
/* init of Serial 4 port */
Ser4MCCR0 = 0;
Ser4SSCR0 = 0x0387;
Ser4SSCR1 = 0x18;
/* clear out any left over data */
ssp_flush();
/* enable MCU */
jornada_ssp_start();
/* see if return value makes sense */
ret = jornada_ssp_inout(GETBRIGHTNESS);
/* seems like it worked, just feed it with TxDummy to get rid of data */
if (ret == TXDUMMY)
jornada_ssp_inout(TXDUMMY);
jornada_ssp_end();
/* failed, lets just kill everything */
if (ret == -ETIMEDOUT) {
printk(KERN_WARNING "SSP: attempts failed, bailing\n");
ssp_exit();
return -ENODEV;
}
/* all fine */
printk(KERN_INFO "SSP: device initialized\n");
return 0;
};
static int jornada_ssp_remove(struct platform_device *dev)
{
/* Note that this doesn't actually remove the driver, since theres nothing to remove
* It just makes sure everything is turned off */
GPSR = GPIO_GPIO25;
ssp_exit();
return 0;
};
struct platform_driver jornadassp_driver = {
.probe = jornada_ssp_probe,
.remove = jornada_ssp_remove,
.driver = {
.name = "jornada_ssp",
},
};
static int __init jornada_ssp_init(void)
{
return platform_driver_register(&jornadassp_driver);
}
module_init(jornada_ssp_init);