linux/arch/x86/pci/intel_mid_pci.c
Jiang Liu cffe0a2b5a x86, irq: Keep balance of IOAPIC pin reference count
To keep balance of IOAPIC pin reference count, we need to protect
pirq_enable_irq(), acpi_pci_irq_enable() and intel_mid_pci_irq_enable()
from reentrance. There are two cases which will cause reentrance.

The first case is caused by suspend/hibernation. If pcibios_disable_irq
is called during suspending/hibernating, we don't release the assigned
IRQ number, otherwise it may break the suspend/hibernation. So late when
pcibios_enable_irq is called during resume, we shouldn't allocate IRQ
number again.

The second case is that function acpi_pci_irq_enable() may be called
twice for PCI devices present at boot time as below:
1) pci_acpi_init()
	--> acpi_pci_irq_enable() if pci_routeirq is true
2) pci_enable_device()
	--> pcibios_enable_device()
		--> acpi_pci_irq_enable()
We can't kill kernel parameter pci_routeirq yet because it's still
needed for debugging purpose.

So flag irq_managed is introduced to track whether IRQ number is
assigned by OS and to protect pirq_enable_irq(), acpi_pci_irq_enable()
and intel_mid_pci_irq_enable() from reentrance.

Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Len Brown <lenb@kernel.org>
Link: http://lkml.kernel.org/r/1414387308-27148-13-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-12-16 14:08:15 +01:00

328 lines
9.2 KiB
C

/*
* Intel MID PCI support
* Copyright (c) 2008 Intel Corporation
* Jesse Barnes <jesse.barnes@intel.com>
*
* Moorestown has an interesting PCI implementation:
* - configuration space is memory mapped (as defined by MCFG)
* - Lincroft devices also have a real, type 1 configuration space
* - Early Lincroft silicon has a type 1 access bug that will cause
* a hang if non-existent devices are accessed
* - some devices have the "fixed BAR" capability, which means
* they can't be relocated or modified; check for that during
* BAR sizing
*
* So, we use the MCFG space for all reads and writes, but also send
* Lincroft writes to type 1 space. But only read/write if the device
* actually exists, otherwise return all 1s for reads and bit bucket
* the writes.
*/
#include <linux/sched.h>
#include <linux/pci.h>
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/dmi.h>
#include <linux/acpi.h>
#include <linux/io.h>
#include <linux/smp.h>
#include <asm/segment.h>
#include <asm/pci_x86.h>
#include <asm/hw_irq.h>
#include <asm/io_apic.h>
#include <asm/intel-mid.h>
#define PCIE_CAP_OFFSET 0x100
/* Fixed BAR fields */
#define PCIE_VNDR_CAP_ID_FIXED_BAR 0x00 /* Fixed BAR (TBD) */
#define PCI_FIXED_BAR_0_SIZE 0x04
#define PCI_FIXED_BAR_1_SIZE 0x08
#define PCI_FIXED_BAR_2_SIZE 0x0c
#define PCI_FIXED_BAR_3_SIZE 0x10
#define PCI_FIXED_BAR_4_SIZE 0x14
#define PCI_FIXED_BAR_5_SIZE 0x1c
static int pci_soc_mode;
/**
* fixed_bar_cap - return the offset of the fixed BAR cap if found
* @bus: PCI bus
* @devfn: device in question
*
* Look for the fixed BAR cap on @bus and @devfn, returning its offset
* if found or 0 otherwise.
*/
static int fixed_bar_cap(struct pci_bus *bus, unsigned int devfn)
{
int pos;
u32 pcie_cap = 0, cap_data;
pos = PCIE_CAP_OFFSET;
if (!raw_pci_ext_ops)
return 0;
while (pos) {
if (raw_pci_ext_ops->read(pci_domain_nr(bus), bus->number,
devfn, pos, 4, &pcie_cap))
return 0;
if (PCI_EXT_CAP_ID(pcie_cap) == 0x0000 ||
PCI_EXT_CAP_ID(pcie_cap) == 0xffff)
break;
if (PCI_EXT_CAP_ID(pcie_cap) == PCI_EXT_CAP_ID_VNDR) {
raw_pci_ext_ops->read(pci_domain_nr(bus), bus->number,
devfn, pos + 4, 4, &cap_data);
if ((cap_data & 0xffff) == PCIE_VNDR_CAP_ID_FIXED_BAR)
return pos;
}
pos = PCI_EXT_CAP_NEXT(pcie_cap);
}
return 0;
}
static int pci_device_update_fixed(struct pci_bus *bus, unsigned int devfn,
int reg, int len, u32 val, int offset)
{
u32 size;
unsigned int domain, busnum;
int bar = (reg - PCI_BASE_ADDRESS_0) >> 2;
domain = pci_domain_nr(bus);
busnum = bus->number;
if (val == ~0 && len == 4) {
unsigned long decode;
raw_pci_ext_ops->read(domain, busnum, devfn,
offset + 8 + (bar * 4), 4, &size);
/* Turn the size into a decode pattern for the sizing code */
if (size) {
decode = size - 1;
decode |= decode >> 1;
decode |= decode >> 2;
decode |= decode >> 4;
decode |= decode >> 8;
decode |= decode >> 16;
decode++;
decode = ~(decode - 1);
} else {
decode = 0;
}
/*
* If val is all ones, the core code is trying to size the reg,
* so update the mmconfig space with the real size.
*
* Note: this assumes the fixed size we got is a power of two.
*/
return raw_pci_ext_ops->write(domain, busnum, devfn, reg, 4,
decode);
}
/* This is some other kind of BAR write, so just do it. */
return raw_pci_ext_ops->write(domain, busnum, devfn, reg, len, val);
}
/**
* type1_access_ok - check whether to use type 1
* @bus: bus number
* @devfn: device & function in question
*
* If the bus is on a Lincroft chip and it exists, or is not on a Lincroft at
* all, the we can go ahead with any reads & writes. If it's on a Lincroft,
* but doesn't exist, avoid the access altogether to keep the chip from
* hanging.
*/
static bool type1_access_ok(unsigned int bus, unsigned int devfn, int reg)
{
/*
* This is a workaround for A0 LNC bug where PCI status register does
* not have new CAP bit set. can not be written by SW either.
*
* PCI header type in real LNC indicates a single function device, this
* will prevent probing other devices under the same function in PCI
* shim. Therefore, use the header type in shim instead.
*/
if (reg >= 0x100 || reg == PCI_STATUS || reg == PCI_HEADER_TYPE)
return false;
if (bus == 0 && (devfn == PCI_DEVFN(2, 0)
|| devfn == PCI_DEVFN(0, 0)
|| devfn == PCI_DEVFN(3, 0)))
return true;
return false; /* Langwell on others */
}
static int pci_read(struct pci_bus *bus, unsigned int devfn, int where,
int size, u32 *value)
{
if (type1_access_ok(bus->number, devfn, where))
return pci_direct_conf1.read(pci_domain_nr(bus), bus->number,
devfn, where, size, value);
return raw_pci_ext_ops->read(pci_domain_nr(bus), bus->number,
devfn, where, size, value);
}
static int pci_write(struct pci_bus *bus, unsigned int devfn, int where,
int size, u32 value)
{
int offset;
/*
* On MRST, there is no PCI ROM BAR, this will cause a subsequent read
* to ROM BAR return 0 then being ignored.
*/
if (where == PCI_ROM_ADDRESS)
return 0;
/*
* Devices with fixed BARs need special handling:
* - BAR sizing code will save, write ~0, read size, restore
* - so writes to fixed BARs need special handling
* - other writes to fixed BAR devices should go through mmconfig
*/
offset = fixed_bar_cap(bus, devfn);
if (offset &&
(where >= PCI_BASE_ADDRESS_0 && where <= PCI_BASE_ADDRESS_5)) {
return pci_device_update_fixed(bus, devfn, where, size, value,
offset);
}
/*
* On Moorestown update both real & mmconfig space
* Note: early Lincroft silicon can't handle type 1 accesses to
* non-existent devices, so just eat the write in that case.
*/
if (type1_access_ok(bus->number, devfn, where))
return pci_direct_conf1.write(pci_domain_nr(bus), bus->number,
devfn, where, size, value);
return raw_pci_ext_ops->write(pci_domain_nr(bus), bus->number, devfn,
where, size, value);
}
static int intel_mid_pci_irq_enable(struct pci_dev *dev)
{
int polarity;
if (dev->irq_managed && dev->irq > 0)
return 0;
if (intel_mid_identify_cpu() == INTEL_MID_CPU_CHIP_TANGIER)
polarity = 0; /* active high */
else
polarity = 1; /* active low */
/*
* MRST only have IOAPIC, the PCI irq lines are 1:1 mapped to
* IOAPIC RTE entries, so we just enable RTE for the device.
*/
if (mp_set_gsi_attr(dev->irq, 1, polarity, dev_to_node(&dev->dev)))
return -EBUSY;
if (mp_map_gsi_to_irq(dev->irq, IOAPIC_MAP_ALLOC) < 0)
return -EBUSY;
dev->irq_managed = 1;
return 0;
}
static void intel_mid_pci_irq_disable(struct pci_dev *dev)
{
if (!mp_should_keep_irq(&dev->dev) && dev->irq_managed &&
dev->irq > 0) {
mp_unmap_irq(dev->irq);
dev->irq_managed = 0;
}
}
struct pci_ops intel_mid_pci_ops = {
.read = pci_read,
.write = pci_write,
};
/**
* intel_mid_pci_init - installs intel_mid_pci_ops
*
* Moorestown has an interesting PCI implementation (see above).
* Called when the early platform detection installs it.
*/
int __init intel_mid_pci_init(void)
{
pr_info("Intel MID platform detected, using MID PCI ops\n");
pci_mmcfg_late_init();
pcibios_enable_irq = intel_mid_pci_irq_enable;
pcibios_disable_irq = intel_mid_pci_irq_disable;
pci_root_ops = intel_mid_pci_ops;
pci_soc_mode = 1;
/* Continue with standard init */
return 1;
}
/*
* Langwell devices are not true PCI devices; they are not subject to 10 ms
* d3 to d0 delay required by PCI spec.
*/
static void pci_d3delay_fixup(struct pci_dev *dev)
{
/*
* PCI fixups are effectively decided compile time. If we have a dual
* SoC/non-SoC kernel we don't want to mangle d3 on non-SoC devices.
*/
if (!pci_soc_mode)
return;
/*
* True PCI devices in Lincroft should allow type 1 access, the rest
* are Langwell fake PCI devices.
*/
if (type1_access_ok(dev->bus->number, dev->devfn, PCI_DEVICE_ID))
return;
dev->d3_delay = 0;
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_d3delay_fixup);
static void mrst_power_off_unused_dev(struct pci_dev *dev)
{
pci_set_power_state(dev, PCI_D3hot);
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0801, mrst_power_off_unused_dev);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0809, mrst_power_off_unused_dev);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x080C, mrst_power_off_unused_dev);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0812, mrst_power_off_unused_dev);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0815, mrst_power_off_unused_dev);
/*
* Langwell devices reside at fixed offsets, don't try to move them.
*/
static void pci_fixed_bar_fixup(struct pci_dev *dev)
{
unsigned long offset;
u32 size;
int i;
if (!pci_soc_mode)
return;
/* Must have extended configuration space */
if (dev->cfg_size < PCIE_CAP_OFFSET + 4)
return;
/* Fixup the BAR sizes for fixed BAR devices and make them unmoveable */
offset = fixed_bar_cap(dev->bus, dev->devfn);
if (!offset || PCI_DEVFN(2, 0) == dev->devfn ||
PCI_DEVFN(2, 2) == dev->devfn)
return;
for (i = 0; i < PCI_ROM_RESOURCE; i++) {
pci_read_config_dword(dev, offset + 8 + (i * 4), &size);
dev->resource[i].end = dev->resource[i].start + size - 1;
dev->resource[i].flags |= IORESOURCE_PCI_FIXED;
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_fixed_bar_fixup);