linux/kernel/trace
Linus Torvalds b8c0aa46b3 This pull request has a lot of work done. The main thing is the changes
to the ftrace function callback infrastructure. It's introducing a
 way to allow different functions to call directly different trampolines
 instead of all calling the same "mcount" one.
 
 The only user of this for now is the function graph tracer, which always
 had a different trampoline, but the function tracer trampoline was called
 and did basically nothing, and then the function graph tracer trampoline
 was called. The difference now, is that the function graph tracer
 trampoline can be called directly if a function is only being traced by
 the function graph trampoline. If function tracing is also happening on
 the same function, the old way is still done.
 
 The accounting for this takes up more memory when function graph tracing
 is activated, as it needs to keep track of which functions it uses.
 I have a new way that wont take as much memory, but it's not ready yet
 for this merge window, and will have to wait for the next one.
 
 Another big change was the removal of the ftrace_start/stop() calls that
 were used by the suspend/resume code that stopped function tracing when
 entering into suspend and resume paths. The stop of ftrace was done
 because there was some function that would crash the system if one called
 smp_processor_id()! The stop/start was a big hammer to solve the issue
 at the time, which was when ftrace was first introduced into Linux.
 Now ftrace has better infrastructure to debug such issues, and I found
 the problem function and labeled it with "notrace" and function tracing
 can now safely be activated all the way down into the guts of suspend
 and resume.
 
 Other changes include clean ups of uprobe code.
 Clean up of the trace_seq() code.
 And other various small fixes and clean ups to ftrace and tracing.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJT35zXAAoJEKQekfcNnQGuOz0H/38zqM0nLFhrgvz3EPk2UOjn
 xqpX8qyb2V7TJZL+IqeXU2a5cQZl5ba0D4WtBGpxbTae3CJYiuQ87iKUNFoH0om5
 FDpn80igb368k8V3qRdRsziKVCCf0XBd/NkHJXc0ZkfXGyzB2Ga4bBxALxp2gj9y
 bnO+vKo6+tWYKG4hyQb4P3LRXUrK8/LWEsPr39cH2QH1Rdj69Lx9CgrCdUVJmwcb
 Bj8hEiLXL/RYCFNn79A3wNTUvW0rG/AOIf4SLqXtasSRZ0ToaU0ZyDnrNv+0Ol47
 rX8tSk+LfXchL9hpIvjCf1vlAYq3pO02favteR/jip3lx/dTjEDE4RJ9qtJzZ4Q=
 =fwQY
 -----END PGP SIGNATURE-----

Merge tag 'trace-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing updates from Steven Rostedt:
 "This pull request has a lot of work done.  The main thing is the
  changes to the ftrace function callback infrastructure.  It's
  introducing a way to allow different functions to call directly
  different trampolines instead of all calling the same "mcount" one.

  The only user of this for now is the function graph tracer, which
  always had a different trampoline, but the function tracer trampoline
  was called and did basically nothing, and then the function graph
  tracer trampoline was called.  The difference now, is that the
  function graph tracer trampoline can be called directly if a function
  is only being traced by the function graph trampoline.  If function
  tracing is also happening on the same function, the old way is still
  done.

  The accounting for this takes up more memory when function graph
  tracing is activated, as it needs to keep track of which functions it
  uses.  I have a new way that wont take as much memory, but it's not
  ready yet for this merge window, and will have to wait for the next
  one.

  Another big change was the removal of the ftrace_start/stop() calls
  that were used by the suspend/resume code that stopped function
  tracing when entering into suspend and resume paths.  The stop of
  ftrace was done because there was some function that would crash the
  system if one called smp_processor_id()! The stop/start was a big
  hammer to solve the issue at the time, which was when ftrace was first
  introduced into Linux.  Now ftrace has better infrastructure to debug
  such issues, and I found the problem function and labeled it with
  "notrace" and function tracing can now safely be activated all the way
  down into the guts of suspend and resume

  Other changes include clean ups of uprobe code, clean up of the
  trace_seq() code, and other various small fixes and clean ups to
  ftrace and tracing"

* tag 'trace-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (57 commits)
  ftrace: Add warning if tramp hash does not match nr_trampolines
  ftrace: Fix trampoline hash update check on rec->flags
  ring-buffer: Use rb_page_size() instead of open coded head_page size
  ftrace: Rename ftrace_ops field from trampolines to nr_trampolines
  tracing: Convert local function_graph functions to static
  ftrace: Do not copy old hash when resetting
  tracing: let user specify tracing_thresh after selecting function_graph
  ring-buffer: Always run per-cpu ring buffer resize with schedule_work_on()
  tracing: Remove function_trace_stop and HAVE_FUNCTION_TRACE_MCOUNT_TEST
  s390/ftrace: remove check of obsolete variable function_trace_stop
  arm64, ftrace: Remove check of obsolete variable function_trace_stop
  Blackfin: ftrace: Remove check of obsolete variable function_trace_stop
  metag: ftrace: Remove check of obsolete variable function_trace_stop
  microblaze: ftrace: Remove check of obsolete variable function_trace_stop
  MIPS: ftrace: Remove check of obsolete variable function_trace_stop
  parisc: ftrace: Remove check of obsolete variable function_trace_stop
  sh: ftrace: Remove check of obsolete variable function_trace_stop
  sparc64,ftrace: Remove check of obsolete variable function_trace_stop
  tile: ftrace: Remove check of obsolete variable function_trace_stop
  ftrace: x86: Remove check of obsolete variable function_trace_stop
  ...
2014-08-04 11:50:00 -07:00
..
blktrace.c Most of the changes were largely clean ups, and some documentation. 2014-04-03 10:26:31 -07:00
ftrace.c This pull request has a lot of work done. The main thing is the changes 2014-08-04 11:50:00 -07:00
Kconfig tracing: Remove function_trace_stop and HAVE_FUNCTION_TRACE_MCOUNT_TEST 2014-07-18 13:58:12 -04:00
Makefile tracing: Move the trace_seq_* functions into its own trace_seq.c file 2014-07-01 07:13:35 -04:00
power-traces.c PM / tracing: remove deprecated power trace API 2013-01-26 00:39:12 +01:00
ring_buffer_benchmark.c trace: Replace hardcoding of 19 with MAX_NICE 2014-02-27 12:41:03 +01:00
ring_buffer.c This pull request has a lot of work done. The main thing is the changes 2014-08-04 11:50:00 -07:00
rpm-traces.c PM / Runtime: Introduce trace points for tracing rpm_* functions 2011-09-27 22:53:27 +02:00
trace_benchmark.c tracing: Only calculate stats of tracepoint benchmarks for 2^32 times 2014-06-06 00:41:38 -04:00
trace_benchmark.h tracing: Add tracepoint benchmark tracepoint 2014-05-29 22:49:54 -04:00
trace_branch.c tracing: Update event filters for multibuffer 2013-11-05 16:50:20 -05:00
trace_clock.c tracing: Fix wraparound problems in "uptime" trace clock 2014-07-21 09:56:12 -04:00
trace_entries.h tracing: Add trace_puts() for even faster trace_printk() tracing 2013-03-15 00:35:55 -04:00
trace_event_perf.c kprobes, ftrace: Use NOKPROBE_SYMBOL macro in ftrace 2014-04-24 10:26:39 +02:00
trace_events_filter_test.h tracing/filter: Add startup tests for events filter 2011-08-19 14:35:59 -04:00
trace_events_filter.c tracing: Add and use generic set_trigger_filter() implementation 2013-12-21 22:02:17 -05:00
trace_events_trigger.c tracing: Use rcu_dereference_sched() for trace event triggers 2014-05-02 23:12:42 -04:00
trace_events.c This pull request has a lot of work done. The main thing is the changes 2014-08-04 11:50:00 -07:00
trace_export.c tracing: Fix anonymous unions in struct ftrace_event_call 2014-04-09 20:02:55 -04:00
trace_functions_graph.c tracing: Convert local function_graph functions to static 2014-07-18 21:16:06 -04:00
trace_functions.c tracing: Remove mock up poll wait function 2014-04-30 08:40:05 -04:00
trace_irqsoff.c tracing: Allow irq/preempt tracers to be used by instances 2014-04-21 13:59:29 -04:00
trace_kdb.c tracing: Consolidate max_tr into main trace_array structure 2013-03-15 00:35:40 -04:00
trace_kprobe.c Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2014-06-12 19:18:49 -07:00
trace_mmiotrace.c tracing: Update event filters for multibuffer 2013-11-05 16:50:20 -05:00
trace_nop.c tracing: Remove mock up poll wait function 2014-04-30 08:40:05 -04:00
trace_output.c tracing: Add trace_seq_buffer_ptr() helper function 2014-07-01 07:13:39 -04:00
trace_output.h tracing: Make trace_seq_putmem_hex() more robust 2014-07-01 07:13:37 -04:00
trace_printk.c tracing: Add __tracepoint_string() to export string pointers 2013-07-26 13:39:44 -04:00
trace_probe.c kprobes, ftrace: Use NOKPROBE_SYMBOL macro in ftrace 2014-04-24 10:26:39 +02:00
trace_probe.h kprobes, ftrace: Use NOKPROBE_SYMBOL macro in ftrace 2014-04-24 10:26:39 +02:00
trace_sched_switch.c tracing: Update event filters for multibuffer 2013-11-05 16:50:20 -05:00
trace_sched_wakeup.c tracing: Remove mock up poll wait function 2014-04-30 08:40:05 -04:00
trace_selftest_dynamic.c ftrace: Add self-tests for multiple function trace users 2011-05-18 19:24:51 -04:00
trace_selftest.c tracing: Add static to local functions 2014-04-21 14:00:46 -04:00
trace_seq.c tracing: Remove trace_seq_reserve() 2014-07-01 07:13:37 -04:00
trace_stack.c tracing: Print max callstack on stacktrace bug 2014-06-02 16:43:49 -04:00
trace_stat.c trace/trace_stat: use rbtree postorder iteration helper instead of opencoding 2013-11-05 16:01:47 -05:00
trace_stat.h
trace_syscalls.c tracing: Consolidate event trigger code 2014-01-09 21:20:07 -05:00
trace_uprobe.c tracing/uprobes: Fix the usage of uprobe_buffer_enable() in probe_event_enable() 2014-06-30 13:22:33 -04:00
trace.c This pull request has a lot of work done. The main thing is the changes 2014-08-04 11:50:00 -07:00
trace.h tracing: let user specify tracing_thresh after selecting function_graph 2014-07-18 15:48:52 -04:00