linux/kernel/trace/Kconfig
Steven Rostedt b732d439cb ftrace: Remove selecting FRAME_POINTER with FUNCTION_TRACER
The function tracer will enable the -pg option with gcc, which requires
that frame pointers. When FRAME_POINTER is defined in the kernel config
it adds the gcc option -fno-omit-frame-pointer which causes some problems
on some architectures. For those architectures, the FRAME_POINTER select
was not set.

When FUNCTION_TRACER was selected on these architectures that can not have
-fno-omit-frame-pointer, the -pg option is still set. But when
FRAME_POINTER is not selected, the kernel config would add the gcc option
-fomit-frame-pointer. Adding this option is incompatible with -pg
even on archs that do not need frame pointers with -pg.

The answer to this was to just not add either -fno-omit-frame-pointer
or -fomit-frame-pointer on these archs that want function tracing
but do not set FRAME_POINTER.

As it turns out, for archs that require frame pointers for function
tracing, the same can be used. If gcc requires frame pointers with
-pg, it will simply add it. The best thing to do is not select FRAME_POINTER
when function tracing is selected, and let gcc add it if needed.

Only add the -fno-omit-frame-pointer when something else selects
FRAME_POINTER, but do not add -fomit-frame-pointer if function tracing
is selected.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-16 20:00:29 -04:00

493 lines
14 KiB
Plaintext

#
# Architectures that offer an FUNCTION_TRACER implementation should
# select HAVE_FUNCTION_TRACER:
#
config USER_STACKTRACE_SUPPORT
bool
config NOP_TRACER
bool
config HAVE_FTRACE_NMI_ENTER
bool
help
See Documentation/trace/ftrace-design.txt
config HAVE_FUNCTION_TRACER
bool
help
See Documentation/trace/ftrace-design.txt
config HAVE_FUNCTION_GRAPH_TRACER
bool
help
See Documentation/trace/ftrace-design.txt
config HAVE_FUNCTION_GRAPH_FP_TEST
bool
help
See Documentation/trace/ftrace-design.txt
config HAVE_FUNCTION_TRACE_MCOUNT_TEST
bool
help
See Documentation/trace/ftrace-design.txt
config HAVE_DYNAMIC_FTRACE
bool
help
See Documentation/trace/ftrace-design.txt
config HAVE_FTRACE_MCOUNT_RECORD
bool
help
See Documentation/trace/ftrace-design.txt
config HAVE_SYSCALL_TRACEPOINTS
bool
help
See Documentation/trace/ftrace-design.txt
config HAVE_C_RECORDMCOUNT
bool
help
C version of recordmcount available?
config TRACER_MAX_TRACE
bool
config RING_BUFFER
bool
config FTRACE_NMI_ENTER
bool
depends on HAVE_FTRACE_NMI_ENTER
default y
config EVENT_TRACING
select CONTEXT_SWITCH_TRACER
bool
config EVENT_POWER_TRACING_DEPRECATED
depends on EVENT_TRACING
bool "Deprecated power event trace API, to be removed"
default y
help
Provides old power event types:
C-state/idle accounting events:
power:power_start
power:power_end
and old cpufreq accounting event:
power:power_frequency
This is for userspace compatibility
and will vanish after 5 kernel iterations,
namely 3.1.
config CONTEXT_SWITCH_TRACER
bool
config RING_BUFFER_ALLOW_SWAP
bool
help
Allow the use of ring_buffer_swap_cpu.
Adds a very slight overhead to tracing when enabled.
# All tracer options should select GENERIC_TRACER. For those options that are
# enabled by all tracers (context switch and event tracer) they select TRACING.
# This allows those options to appear when no other tracer is selected. But the
# options do not appear when something else selects it. We need the two options
# GENERIC_TRACER and TRACING to avoid circular dependencies to accomplish the
# hiding of the automatic options.
config TRACING
bool
select DEBUG_FS
select RING_BUFFER
select STACKTRACE if STACKTRACE_SUPPORT
select TRACEPOINTS
select NOP_TRACER
select BINARY_PRINTF
select EVENT_TRACING
config GENERIC_TRACER
bool
select TRACING
#
# Minimum requirements an architecture has to meet for us to
# be able to offer generic tracing facilities:
#
config TRACING_SUPPORT
bool
# PPC32 has no irqflags tracing support, but it can use most of the
# tracers anyway, they were tested to build and work. Note that new
# exceptions to this list aren't welcomed, better implement the
# irqflags tracing for your architecture.
depends on TRACE_IRQFLAGS_SUPPORT || PPC32
depends on STACKTRACE_SUPPORT
default y
if TRACING_SUPPORT
menuconfig FTRACE
bool "Tracers"
default y if DEBUG_KERNEL
help
Enable the kernel tracing infrastructure.
if FTRACE
config FUNCTION_TRACER
bool "Kernel Function Tracer"
depends on HAVE_FUNCTION_TRACER
select KALLSYMS
select GENERIC_TRACER
select CONTEXT_SWITCH_TRACER
help
Enable the kernel to trace every kernel function. This is done
by using a compiler feature to insert a small, 5-byte No-Operation
instruction at the beginning of every kernel function, which NOP
sequence is then dynamically patched into a tracer call when
tracing is enabled by the administrator. If it's runtime disabled
(the bootup default), then the overhead of the instructions is very
small and not measurable even in micro-benchmarks.
config FUNCTION_GRAPH_TRACER
bool "Kernel Function Graph Tracer"
depends on HAVE_FUNCTION_GRAPH_TRACER
depends on FUNCTION_TRACER
depends on !X86_32 || !CC_OPTIMIZE_FOR_SIZE
default y
help
Enable the kernel to trace a function at both its return
and its entry.
Its first purpose is to trace the duration of functions and
draw a call graph for each thread with some information like
the return value. This is done by setting the current return
address on the current task structure into a stack of calls.
config IRQSOFF_TRACER
bool "Interrupts-off Latency Tracer"
default n
depends on TRACE_IRQFLAGS_SUPPORT
depends on !ARCH_USES_GETTIMEOFFSET
select TRACE_IRQFLAGS
select GENERIC_TRACER
select TRACER_MAX_TRACE
select RING_BUFFER_ALLOW_SWAP
help
This option measures the time spent in irqs-off critical
sections, with microsecond accuracy.
The default measurement method is a maximum search, which is
disabled by default and can be runtime (re-)started
via:
echo 0 > /sys/kernel/debug/tracing/tracing_max_latency
(Note that kernel size and overhead increase with this option
enabled. This option and the preempt-off timing option can be
used together or separately.)
config PREEMPT_TRACER
bool "Preemption-off Latency Tracer"
default n
depends on !ARCH_USES_GETTIMEOFFSET
depends on PREEMPT
select GENERIC_TRACER
select TRACER_MAX_TRACE
select RING_BUFFER_ALLOW_SWAP
help
This option measures the time spent in preemption-off critical
sections, with microsecond accuracy.
The default measurement method is a maximum search, which is
disabled by default and can be runtime (re-)started
via:
echo 0 > /sys/kernel/debug/tracing/tracing_max_latency
(Note that kernel size and overhead increase with this option
enabled. This option and the irqs-off timing option can be
used together or separately.)
config SCHED_TRACER
bool "Scheduling Latency Tracer"
select GENERIC_TRACER
select CONTEXT_SWITCH_TRACER
select TRACER_MAX_TRACE
help
This tracer tracks the latency of the highest priority task
to be scheduled in, starting from the point it has woken up.
config ENABLE_DEFAULT_TRACERS
bool "Trace process context switches and events"
depends on !GENERIC_TRACER
select TRACING
help
This tracer hooks to various trace points in the kernel,
allowing the user to pick and choose which trace point they
want to trace. It also includes the sched_switch tracer plugin.
config FTRACE_SYSCALLS
bool "Trace syscalls"
depends on HAVE_SYSCALL_TRACEPOINTS
select GENERIC_TRACER
select KALLSYMS
help
Basic tracer to catch the syscall entry and exit events.
config TRACE_BRANCH_PROFILING
bool
select GENERIC_TRACER
choice
prompt "Branch Profiling"
default BRANCH_PROFILE_NONE
help
The branch profiling is a software profiler. It will add hooks
into the C conditionals to test which path a branch takes.
The likely/unlikely profiler only looks at the conditions that
are annotated with a likely or unlikely macro.
The "all branch" profiler will profile every if-statement in the
kernel. This profiler will also enable the likely/unlikely
profiler.
Either of the above profilers adds a bit of overhead to the system.
If unsure, choose "No branch profiling".
config BRANCH_PROFILE_NONE
bool "No branch profiling"
help
No branch profiling. Branch profiling adds a bit of overhead.
Only enable it if you want to analyse the branching behavior.
Otherwise keep it disabled.
config PROFILE_ANNOTATED_BRANCHES
bool "Trace likely/unlikely profiler"
select TRACE_BRANCH_PROFILING
help
This tracer profiles all the the likely and unlikely macros
in the kernel. It will display the results in:
/sys/kernel/debug/tracing/trace_stat/branch_annotated
Note: this will add a significant overhead; only turn this
on if you need to profile the system's use of these macros.
config PROFILE_ALL_BRANCHES
bool "Profile all if conditionals"
select TRACE_BRANCH_PROFILING
help
This tracer profiles all branch conditions. Every if ()
taken in the kernel is recorded whether it hit or miss.
The results will be displayed in:
/sys/kernel/debug/tracing/trace_stat/branch_all
This option also enables the likely/unlikely profiler.
This configuration, when enabled, will impose a great overhead
on the system. This should only be enabled when the system
is to be analyzed in much detail.
endchoice
config TRACING_BRANCHES
bool
help
Selected by tracers that will trace the likely and unlikely
conditions. This prevents the tracers themselves from being
profiled. Profiling the tracing infrastructure can only happen
when the likelys and unlikelys are not being traced.
config BRANCH_TRACER
bool "Trace likely/unlikely instances"
depends on TRACE_BRANCH_PROFILING
select TRACING_BRANCHES
help
This traces the events of likely and unlikely condition
calls in the kernel. The difference between this and the
"Trace likely/unlikely profiler" is that this is not a
histogram of the callers, but actually places the calling
events into a running trace buffer to see when and where the
events happened, as well as their results.
Say N if unsure.
config STACK_TRACER
bool "Trace max stack"
depends on HAVE_FUNCTION_TRACER
select FUNCTION_TRACER
select STACKTRACE
select KALLSYMS
help
This special tracer records the maximum stack footprint of the
kernel and displays it in /sys/kernel/debug/tracing/stack_trace.
This tracer works by hooking into every function call that the
kernel executes, and keeping a maximum stack depth value and
stack-trace saved. If this is configured with DYNAMIC_FTRACE
then it will not have any overhead while the stack tracer
is disabled.
To enable the stack tracer on bootup, pass in 'stacktrace'
on the kernel command line.
The stack tracer can also be enabled or disabled via the
sysctl kernel.stack_tracer_enabled
Say N if unsure.
config BLK_DEV_IO_TRACE
bool "Support for tracing block IO actions"
depends on SYSFS
depends on BLOCK
select RELAY
select DEBUG_FS
select TRACEPOINTS
select GENERIC_TRACER
select STACKTRACE
help
Say Y here if you want to be able to trace the block layer actions
on a given queue. Tracing allows you to see any traffic happening
on a block device queue. For more information (and the userspace
support tools needed), fetch the blktrace tools from:
git://git.kernel.dk/blktrace.git
Tracing also is possible using the ftrace interface, e.g.:
echo 1 > /sys/block/sda/sda1/trace/enable
echo blk > /sys/kernel/debug/tracing/current_tracer
cat /sys/kernel/debug/tracing/trace_pipe
If unsure, say N.
config KPROBE_EVENT
depends on KPROBES
depends on HAVE_REGS_AND_STACK_ACCESS_API
bool "Enable kprobes-based dynamic events"
select TRACING
default y
help
This allows the user to add tracing events (similar to tracepoints)
on the fly via the ftrace interface. See
Documentation/trace/kprobetrace.txt for more details.
Those events can be inserted wherever kprobes can probe, and record
various register and memory values.
This option is also required by perf-probe subcommand of perf tools.
If you want to use perf tools, this option is strongly recommended.
config DYNAMIC_FTRACE
bool "enable/disable ftrace tracepoints dynamically"
depends on FUNCTION_TRACER
depends on HAVE_DYNAMIC_FTRACE
default y
help
This option will modify all the calls to ftrace dynamically
(will patch them out of the binary image and replace them
with a No-Op instruction) as they are called. A table is
created to dynamically enable them again.
This way a CONFIG_FUNCTION_TRACER kernel is slightly larger, but
otherwise has native performance as long as no tracing is active.
The changes to the code are done by a kernel thread that
wakes up once a second and checks to see if any ftrace calls
were made. If so, it runs stop_machine (stops all CPUS)
and modifies the code to jump over the call to ftrace.
config FUNCTION_PROFILER
bool "Kernel function profiler"
depends on FUNCTION_TRACER
default n
help
This option enables the kernel function profiler. A file is created
in debugfs called function_profile_enabled which defaults to zero.
When a 1 is echoed into this file profiling begins, and when a
zero is entered, profiling stops. A "functions" file is created in
the trace_stats directory; this file shows the list of functions that
have been hit and their counters.
If in doubt, say N.
config FTRACE_MCOUNT_RECORD
def_bool y
depends on DYNAMIC_FTRACE
depends on HAVE_FTRACE_MCOUNT_RECORD
config FTRACE_SELFTEST
bool
config FTRACE_STARTUP_TEST
bool "Perform a startup test on ftrace"
depends on GENERIC_TRACER
select FTRACE_SELFTEST
help
This option performs a series of startup tests on ftrace. On bootup
a series of tests are made to verify that the tracer is
functioning properly. It will do tests on all the configured
tracers of ftrace.
config EVENT_TRACE_TEST_SYSCALLS
bool "Run selftest on syscall events"
depends on FTRACE_STARTUP_TEST
help
This option will also enable testing every syscall event.
It only enables the event and disables it and runs various loads
with the event enabled. This adds a bit more time for kernel boot
up since it runs this on every system call defined.
TBD - enable a way to actually call the syscalls as we test their
events
config MMIOTRACE
bool "Memory mapped IO tracing"
depends on HAVE_MMIOTRACE_SUPPORT && PCI
select GENERIC_TRACER
help
Mmiotrace traces Memory Mapped I/O access and is meant for
debugging and reverse engineering. It is called from the ioremap
implementation and works via page faults. Tracing is disabled by
default and can be enabled at run-time.
See Documentation/trace/mmiotrace.txt.
If you are not helping to develop drivers, say N.
config MMIOTRACE_TEST
tristate "Test module for mmiotrace"
depends on MMIOTRACE && m
help
This is a dumb module for testing mmiotrace. It is very dangerous
as it will write garbage to IO memory starting at a given address.
However, it should be safe to use on e.g. unused portion of VRAM.
Say N, unless you absolutely know what you are doing.
config RING_BUFFER_BENCHMARK
tristate "Ring buffer benchmark stress tester"
depends on RING_BUFFER
help
This option creates a test to stress the ring buffer and benchmark it.
It creates its own ring buffer such that it will not interfere with
any other users of the ring buffer (such as ftrace). It then creates
a producer and consumer that will run for 10 seconds and sleep for
10 seconds. Each interval it will print out the number of events
it recorded and give a rough estimate of how long each iteration took.
It does not disable interrupts or raise its priority, so it may be
affected by processes that are running.
If unsure, say N.
endif # FTRACE
endif # TRACING_SUPPORT