linux/net/hsr/hsr_slave.c
Lukasz Majewski 5055cccfc2 net: hsr: Provide RedBox support (HSR-SAN)
Introduce RedBox support (HSR-SAN to be more precise) for HSR networks.
Following traffic reduction optimizations have been implemented:
- Do not send HSR supervisory frames to Port C (interlink)
- Do not forward to HSR ring frames addressed to Port C
- Do not forward to Port C frames from HSR ring
- Do not send duplicate HSR frame to HSR ring when destination is Port C

The corresponding patch to modify iptable2 sources has already been sent:
https://lore.kernel.org/netdev/20240308145729.490863-1-lukma@denx.de/T/

Testing procedure (veth and netns):
-----------------------------------
One shall run:
linux-vanila/tools/testing/selftests/net/hsr/hsr_redbox.sh
(Detailed description of the setup one can find in the test
script file).

Testing procedure (real hardware):
----------------------------------
The EVB-KSZ9477 has been used for testing on net-next branch
(SHA1: 5fc68320c1).

Ports 4/5 were used for SW managed HSR (hsr1) as first hsr0 for ports 1/2
(with HW offloading for ksz9477) was created. Port 3 has been used as
interlink port (single USB-ETH dongle).

Configuration - RedBox (EVB-KSZ9477):
if link set lan1 down;ip link set lan2 down
ip link add name hsr0 type hsr slave1 lan1 slave2 lan2 supervision 45 version 1
ip link add name hsr1 type hsr slave1 lan4 slave2 lan5 interlink lan3 supervision 45 version 1
ip link set lan4 up;ip link set lan5 up
ip link set lan3 up
ip addr add 192.168.0.11/24 dev hsr1
ip link set hsr1 up

Configuration - DAN-H (EVB-KSZ9477):

ip link set lan1 down;ip link set lan2 down
ip link add name hsr0 type hsr slave1 lan1 slave2 lan2 supervision 45 version 1
ip link add name hsr1 type hsr slave1 lan4 slave2 lan5 supervision 45 version 1
ip link set lan4 up;ip link set lan5 up
ip addr add 192.168.0.12/24 dev hsr1
ip link set hsr1 up

This approach uses only SW based HSR devices (hsr1).

--------------          -----------------       ------------
DAN-H  Port5 | <------> | Port5         |       |
       Port4 | <------> | Port4   Port3 | <---> | PC
             |          | (RedBox)      |       | (USB-ETH)
EVB-KSZ9477  |          | EVB-KSZ9477   |       |
--------------          -----------------       ------------

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-04-26 12:04:43 +02:00

233 lines
5.4 KiB
C

// SPDX-License-Identifier: GPL-2.0
/* Copyright 2011-2014 Autronica Fire and Security AS
*
* Author(s):
* 2011-2014 Arvid Brodin, arvid.brodin@alten.se
*
* Frame handler other utility functions for HSR and PRP.
*/
#include "hsr_slave.h"
#include <linux/etherdevice.h>
#include <linux/if_arp.h>
#include <linux/if_vlan.h>
#include "hsr_main.h"
#include "hsr_device.h"
#include "hsr_forward.h"
#include "hsr_framereg.h"
bool hsr_invalid_dan_ingress_frame(__be16 protocol)
{
return (protocol != htons(ETH_P_PRP) && protocol != htons(ETH_P_HSR));
}
static rx_handler_result_t hsr_handle_frame(struct sk_buff **pskb)
{
struct sk_buff *skb = *pskb;
struct hsr_port *port;
struct hsr_priv *hsr;
__be16 protocol;
/* Packets from dev_loopback_xmit() do not have L2 header, bail out */
if (unlikely(skb->pkt_type == PACKET_LOOPBACK))
return RX_HANDLER_PASS;
if (!skb_mac_header_was_set(skb)) {
WARN_ONCE(1, "%s: skb invalid", __func__);
return RX_HANDLER_PASS;
}
port = hsr_port_get_rcu(skb->dev);
if (!port)
goto finish_pass;
hsr = port->hsr;
if (hsr_addr_is_self(port->hsr, eth_hdr(skb)->h_source)) {
/* Directly kill frames sent by ourselves */
kfree_skb(skb);
goto finish_consume;
}
/* For HSR, only tagged frames are expected (unless the device offloads
* HSR tag removal), but for PRP there could be non tagged frames as
* well from Single attached nodes (SANs).
*/
protocol = eth_hdr(skb)->h_proto;
if (!(port->dev->features & NETIF_F_HW_HSR_TAG_RM) &&
port->type != HSR_PT_INTERLINK &&
hsr->proto_ops->invalid_dan_ingress_frame &&
hsr->proto_ops->invalid_dan_ingress_frame(protocol))
goto finish_pass;
skb_push(skb, ETH_HLEN);
skb_reset_mac_header(skb);
if ((!hsr->prot_version && protocol == htons(ETH_P_PRP)) ||
protocol == htons(ETH_P_HSR))
skb_set_network_header(skb, ETH_HLEN + HSR_HLEN);
skb_reset_mac_len(skb);
hsr_forward_skb(skb, port);
finish_consume:
return RX_HANDLER_CONSUMED;
finish_pass:
return RX_HANDLER_PASS;
}
bool hsr_port_exists(const struct net_device *dev)
{
return rcu_access_pointer(dev->rx_handler) == hsr_handle_frame;
}
static int hsr_check_dev_ok(struct net_device *dev,
struct netlink_ext_ack *extack)
{
/* Don't allow HSR on non-ethernet like devices */
if ((dev->flags & IFF_LOOPBACK) || dev->type != ARPHRD_ETHER ||
dev->addr_len != ETH_ALEN) {
NL_SET_ERR_MSG_MOD(extack, "Cannot use loopback or non-ethernet device as HSR slave.");
return -EINVAL;
}
/* Don't allow enslaving hsr devices */
if (is_hsr_master(dev)) {
NL_SET_ERR_MSG_MOD(extack,
"Cannot create trees of HSR devices.");
return -EINVAL;
}
if (hsr_port_exists(dev)) {
NL_SET_ERR_MSG_MOD(extack,
"This device is already a HSR slave.");
return -EINVAL;
}
if (is_vlan_dev(dev)) {
NL_SET_ERR_MSG_MOD(extack, "HSR on top of VLAN is not yet supported in this driver.");
return -EINVAL;
}
if (dev->priv_flags & IFF_DONT_BRIDGE) {
NL_SET_ERR_MSG_MOD(extack,
"This device does not support bridging.");
return -EOPNOTSUPP;
}
/* HSR over bonded devices has not been tested, but I'm not sure it
* won't work...
*/
return 0;
}
/* Setup device to be added to the HSR bridge. */
static int hsr_portdev_setup(struct hsr_priv *hsr, struct net_device *dev,
struct hsr_port *port,
struct netlink_ext_ack *extack)
{
struct net_device *hsr_dev;
struct hsr_port *master;
int res;
/* Don't use promiscuous mode for offload since L2 frame forward
* happens at the offloaded hardware.
*/
if (!port->hsr->fwd_offloaded) {
res = dev_set_promiscuity(dev, 1);
if (res)
return res;
}
master = hsr_port_get_hsr(hsr, HSR_PT_MASTER);
hsr_dev = master->dev;
res = netdev_upper_dev_link(dev, hsr_dev, extack);
if (res)
goto fail_upper_dev_link;
res = netdev_rx_handler_register(dev, hsr_handle_frame, port);
if (res)
goto fail_rx_handler;
dev_disable_lro(dev);
return 0;
fail_rx_handler:
netdev_upper_dev_unlink(dev, hsr_dev);
fail_upper_dev_link:
if (!port->hsr->fwd_offloaded)
dev_set_promiscuity(dev, -1);
return res;
}
int hsr_add_port(struct hsr_priv *hsr, struct net_device *dev,
enum hsr_port_type type, struct netlink_ext_ack *extack)
{
struct hsr_port *port, *master;
int res;
if (type != HSR_PT_MASTER) {
res = hsr_check_dev_ok(dev, extack);
if (res)
return res;
}
port = hsr_port_get_hsr(hsr, type);
if (port)
return -EBUSY; /* This port already exists */
port = kzalloc(sizeof(*port), GFP_KERNEL);
if (!port)
return -ENOMEM;
port->hsr = hsr;
port->dev = dev;
port->type = type;
if (type != HSR_PT_MASTER) {
res = hsr_portdev_setup(hsr, dev, port, extack);
if (res)
goto fail_dev_setup;
}
list_add_tail_rcu(&port->port_list, &hsr->ports);
synchronize_rcu();
master = hsr_port_get_hsr(hsr, HSR_PT_MASTER);
netdev_update_features(master->dev);
dev_set_mtu(master->dev, hsr_get_max_mtu(hsr));
return 0;
fail_dev_setup:
kfree(port);
return res;
}
void hsr_del_port(struct hsr_port *port)
{
struct hsr_priv *hsr;
struct hsr_port *master;
hsr = port->hsr;
master = hsr_port_get_hsr(hsr, HSR_PT_MASTER);
list_del_rcu(&port->port_list);
if (port != master) {
netdev_update_features(master->dev);
dev_set_mtu(master->dev, hsr_get_max_mtu(hsr));
netdev_rx_handler_unregister(port->dev);
if (!port->hsr->fwd_offloaded)
dev_set_promiscuity(port->dev, -1);
netdev_upper_dev_unlink(port->dev, master->dev);
}
synchronize_rcu();
kfree(port);
}