mirror of
https://github.com/torvalds/linux.git
synced 2024-11-12 15:11:50 +00:00
795b89d207
Return ENOTTY instead of ENOIOCTLCMD in user-visible ioctl() results The watchdog drivers used to return ENOIOCTLCMD for bad ioctl() commands. ENOIOCTLCMD should not be visible by the user, so use ENOTTY instead. Signed-off-by: Samuel Tardieu <sam@rfc1149.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org>
329 lines
7.4 KiB
C
329 lines
7.4 KiB
C
/*
|
|
* Advantech Single Board Computer WDT driver
|
|
*
|
|
* (c) Copyright 2000-2001 Marek Michalkiewicz <marekm@linux.org.pl>
|
|
*
|
|
* Based on acquirewdt.c which is based on wdt.c.
|
|
* Original copyright messages:
|
|
*
|
|
* (c) Copyright 1996 Alan Cox <alan@redhat.com>, All Rights Reserved.
|
|
* http://www.redhat.com
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version
|
|
* 2 of the License, or (at your option) any later version.
|
|
*
|
|
* Neither Alan Cox nor CymruNet Ltd. admit liability nor provide
|
|
* warranty for any of this software. This material is provided
|
|
* "AS-IS" and at no charge.
|
|
*
|
|
* (c) Copyright 1995 Alan Cox <alan@redhat.com>
|
|
*
|
|
* 14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com>
|
|
* Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT
|
|
*
|
|
* 16-Oct-2002 Rob Radez <rob@osinvestor.com>
|
|
* Clean up ioctls, clean up init + exit, add expect close support,
|
|
* add wdt_start and wdt_stop as parameters.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/types.h>
|
|
#include <linux/miscdevice.h>
|
|
#include <linux/watchdog.h>
|
|
#include <linux/fs.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/notifier.h>
|
|
#include <linux/reboot.h>
|
|
#include <linux/init.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/uaccess.h>
|
|
#include <asm/system.h>
|
|
|
|
#define WATCHDOG_NAME "Advantech WDT"
|
|
#define PFX WATCHDOG_NAME ": "
|
|
#define WATCHDOG_TIMEOUT 60 /* 60 sec default timeout */
|
|
|
|
static unsigned long advwdt_is_open;
|
|
static char adv_expect_close;
|
|
|
|
/*
|
|
* You must set these - there is no sane way to probe for this board.
|
|
*
|
|
* To enable or restart, write the timeout value in seconds (1 to 63)
|
|
* to I/O port wdt_start. To disable, read I/O port wdt_stop.
|
|
* Both are 0x443 for most boards (tested on a PCA-6276VE-00B1), but
|
|
* check your manual (at least the PCA-6159 seems to be different -
|
|
* the manual says wdt_stop is 0x43, not 0x443).
|
|
* (0x43 is also a write-only control register for the 8254 timer!)
|
|
*/
|
|
|
|
static int wdt_stop = 0x443;
|
|
module_param(wdt_stop, int, 0);
|
|
MODULE_PARM_DESC(wdt_stop, "Advantech WDT 'stop' io port (default 0x443)");
|
|
|
|
static int wdt_start = 0x443;
|
|
module_param(wdt_start, int, 0);
|
|
MODULE_PARM_DESC(wdt_start, "Advantech WDT 'start' io port (default 0x443)");
|
|
|
|
static int timeout = WATCHDOG_TIMEOUT; /* in seconds */
|
|
module_param(timeout, int, 0);
|
|
MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. 1<= timeout <=63, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ".");
|
|
|
|
static int nowayout = WATCHDOG_NOWAYOUT;
|
|
module_param(nowayout, int, 0);
|
|
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)");
|
|
|
|
/*
|
|
* Kernel methods.
|
|
*/
|
|
|
|
static void
|
|
advwdt_ping(void)
|
|
{
|
|
/* Write a watchdog value */
|
|
outb_p(timeout, wdt_start);
|
|
}
|
|
|
|
static void
|
|
advwdt_disable(void)
|
|
{
|
|
inb_p(wdt_stop);
|
|
}
|
|
|
|
static ssize_t
|
|
advwdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
|
|
{
|
|
if (count) {
|
|
if (!nowayout) {
|
|
size_t i;
|
|
|
|
adv_expect_close = 0;
|
|
|
|
for (i = 0; i != count; i++) {
|
|
char c;
|
|
if (get_user(c, buf+i))
|
|
return -EFAULT;
|
|
if (c == 'V')
|
|
adv_expect_close = 42;
|
|
}
|
|
}
|
|
advwdt_ping();
|
|
}
|
|
return count;
|
|
}
|
|
|
|
static int
|
|
advwdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
|
|
unsigned long arg)
|
|
{
|
|
int new_timeout;
|
|
void __user *argp = (void __user *)arg;
|
|
int __user *p = argp;
|
|
static struct watchdog_info ident = {
|
|
.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE,
|
|
.firmware_version = 1,
|
|
.identity = "Advantech WDT",
|
|
};
|
|
|
|
switch (cmd) {
|
|
case WDIOC_GETSUPPORT:
|
|
if (copy_to_user(argp, &ident, sizeof(ident)))
|
|
return -EFAULT;
|
|
break;
|
|
|
|
case WDIOC_GETSTATUS:
|
|
case WDIOC_GETBOOTSTATUS:
|
|
return put_user(0, p);
|
|
|
|
case WDIOC_KEEPALIVE:
|
|
advwdt_ping();
|
|
break;
|
|
|
|
case WDIOC_SETTIMEOUT:
|
|
if (get_user(new_timeout, p))
|
|
return -EFAULT;
|
|
if ((new_timeout < 1) || (new_timeout > 63))
|
|
return -EINVAL;
|
|
timeout = new_timeout;
|
|
advwdt_ping();
|
|
/* Fall */
|
|
|
|
case WDIOC_GETTIMEOUT:
|
|
return put_user(timeout, p);
|
|
|
|
case WDIOC_SETOPTIONS:
|
|
{
|
|
int options, retval = -EINVAL;
|
|
|
|
if (get_user(options, p))
|
|
return -EFAULT;
|
|
|
|
if (options & WDIOS_DISABLECARD) {
|
|
advwdt_disable();
|
|
retval = 0;
|
|
}
|
|
|
|
if (options & WDIOS_ENABLECARD) {
|
|
advwdt_ping();
|
|
retval = 0;
|
|
}
|
|
|
|
return retval;
|
|
}
|
|
|
|
default:
|
|
return -ENOTTY;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
advwdt_open(struct inode *inode, struct file *file)
|
|
{
|
|
if (test_and_set_bit(0, &advwdt_is_open))
|
|
return -EBUSY;
|
|
/*
|
|
* Activate
|
|
*/
|
|
|
|
advwdt_ping();
|
|
return nonseekable_open(inode, file);
|
|
}
|
|
|
|
static int
|
|
advwdt_close(struct inode *inode, struct file *file)
|
|
{
|
|
if (adv_expect_close == 42) {
|
|
advwdt_disable();
|
|
} else {
|
|
printk(KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n");
|
|
advwdt_ping();
|
|
}
|
|
clear_bit(0, &advwdt_is_open);
|
|
adv_expect_close = 0;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Notifier for system down
|
|
*/
|
|
|
|
static int
|
|
advwdt_notify_sys(struct notifier_block *this, unsigned long code,
|
|
void *unused)
|
|
{
|
|
if (code == SYS_DOWN || code == SYS_HALT) {
|
|
/* Turn the WDT off */
|
|
advwdt_disable();
|
|
}
|
|
return NOTIFY_DONE;
|
|
}
|
|
|
|
/*
|
|
* Kernel Interfaces
|
|
*/
|
|
|
|
static const struct file_operations advwdt_fops = {
|
|
.owner = THIS_MODULE,
|
|
.llseek = no_llseek,
|
|
.write = advwdt_write,
|
|
.ioctl = advwdt_ioctl,
|
|
.open = advwdt_open,
|
|
.release = advwdt_close,
|
|
};
|
|
|
|
static struct miscdevice advwdt_miscdev = {
|
|
.minor = WATCHDOG_MINOR,
|
|
.name = "watchdog",
|
|
.fops = &advwdt_fops,
|
|
};
|
|
|
|
/*
|
|
* The WDT needs to learn about soft shutdowns in order to
|
|
* turn the timebomb registers off.
|
|
*/
|
|
|
|
static struct notifier_block advwdt_notifier = {
|
|
.notifier_call = advwdt_notify_sys,
|
|
};
|
|
|
|
static int __init
|
|
advwdt_init(void)
|
|
{
|
|
int ret;
|
|
|
|
printk(KERN_INFO "WDT driver for Advantech single board computer initialising.\n");
|
|
|
|
if (timeout < 1 || timeout > 63) {
|
|
timeout = WATCHDOG_TIMEOUT;
|
|
printk (KERN_INFO PFX "timeout value must be 1<=x<=63, using %d\n",
|
|
timeout);
|
|
}
|
|
|
|
if (wdt_stop != wdt_start) {
|
|
if (!request_region(wdt_stop, 1, WATCHDOG_NAME)) {
|
|
printk (KERN_ERR PFX "I/O address 0x%04x already in use\n",
|
|
wdt_stop);
|
|
ret = -EIO;
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
if (!request_region(wdt_start, 1, WATCHDOG_NAME)) {
|
|
printk (KERN_ERR PFX "I/O address 0x%04x already in use\n",
|
|
wdt_start);
|
|
ret = -EIO;
|
|
goto unreg_stop;
|
|
}
|
|
|
|
ret = register_reboot_notifier(&advwdt_notifier);
|
|
if (ret != 0) {
|
|
printk (KERN_ERR PFX "cannot register reboot notifier (err=%d)\n",
|
|
ret);
|
|
goto unreg_regions;
|
|
}
|
|
|
|
ret = misc_register(&advwdt_miscdev);
|
|
if (ret != 0) {
|
|
printk (KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
|
|
WATCHDOG_MINOR, ret);
|
|
goto unreg_reboot;
|
|
}
|
|
|
|
printk (KERN_INFO PFX "initialized. timeout=%d sec (nowayout=%d)\n",
|
|
timeout, nowayout);
|
|
|
|
out:
|
|
return ret;
|
|
unreg_reboot:
|
|
unregister_reboot_notifier(&advwdt_notifier);
|
|
unreg_regions:
|
|
release_region(wdt_start, 1);
|
|
unreg_stop:
|
|
if (wdt_stop != wdt_start)
|
|
release_region(wdt_stop, 1);
|
|
goto out;
|
|
}
|
|
|
|
static void __exit
|
|
advwdt_exit(void)
|
|
{
|
|
misc_deregister(&advwdt_miscdev);
|
|
unregister_reboot_notifier(&advwdt_notifier);
|
|
if(wdt_stop != wdt_start)
|
|
release_region(wdt_stop,1);
|
|
release_region(wdt_start,1);
|
|
}
|
|
|
|
module_init(advwdt_init);
|
|
module_exit(advwdt_exit);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Marek Michalkiewicz <marekm@linux.org.pl>");
|
|
MODULE_DESCRIPTION("Advantech Single Board Computer WDT driver");
|
|
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
|