mirror of
https://github.com/torvalds/linux.git
synced 2024-11-14 08:02:07 +00:00
9af20376ee
Fix enable_irq_wake and disable_irq_wake symmetry in at91 pcmcia driver disable_irq_wake call must be symmetric with enable_irq_wake. This patch fix that problem for the at91_pcmia driver. It seems that this patch was forgotten when we've fixed irq_wake symmetry in all at91 related drivers. It was discussed in the "at91 drivers and [enable/disable]_irq_wake (wrong?) usage" thread on the linux-arm-kernel mailing list. Signed-off-by: Marc Pignat <marc.pignat@hevs.ch> Cc: David Brownell <david-b@pacbell.net> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
390 lines
9.4 KiB
C
390 lines
9.4 KiB
C
/*
|
|
* at91_cf.c -- AT91 CompactFlash controller driver
|
|
*
|
|
* Copyright (C) 2005 David Brownell
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
|
|
#include <pcmcia/ss.h>
|
|
|
|
#include <asm/hardware.h>
|
|
#include <asm/io.h>
|
|
#include <asm/sizes.h>
|
|
|
|
#include <asm/arch/board.h>
|
|
#include <asm/arch/gpio.h>
|
|
#include <asm/arch/at91rm9200_mc.h>
|
|
|
|
|
|
/*
|
|
* A0..A10 work in each range; A23 indicates I/O space; A25 is CFRNW;
|
|
* some other bit in {A24,A22..A11} is nREG to flag memory access
|
|
* (vs attributes). So more than 2KB/region would just be waste.
|
|
* Note: These are offsets from the physical base address.
|
|
*/
|
|
#define CF_ATTR_PHYS (0)
|
|
#define CF_IO_PHYS (1 << 23)
|
|
#define CF_MEM_PHYS (0x017ff800)
|
|
|
|
/*--------------------------------------------------------------------------*/
|
|
|
|
static const char driver_name[] = "at91_cf";
|
|
|
|
struct at91_cf_socket {
|
|
struct pcmcia_socket socket;
|
|
|
|
unsigned present:1;
|
|
|
|
struct platform_device *pdev;
|
|
struct at91_cf_data *board;
|
|
|
|
unsigned long phys_baseaddr;
|
|
};
|
|
|
|
#define SZ_2K (2 * SZ_1K)
|
|
|
|
static inline int at91_cf_present(struct at91_cf_socket *cf)
|
|
{
|
|
return !at91_get_gpio_value(cf->board->det_pin);
|
|
}
|
|
|
|
/*--------------------------------------------------------------------------*/
|
|
|
|
static int at91_cf_ss_init(struct pcmcia_socket *s)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static irqreturn_t at91_cf_irq(int irq, void *_cf)
|
|
{
|
|
struct at91_cf_socket *cf = _cf;
|
|
|
|
if (irq == cf->board->det_pin) {
|
|
unsigned present = at91_cf_present(cf);
|
|
|
|
/* kick pccard as needed */
|
|
if (present != cf->present) {
|
|
cf->present = present;
|
|
pr_debug("%s: card %s\n", driver_name,
|
|
present ? "present" : "gone");
|
|
pcmcia_parse_events(&cf->socket, SS_DETECT);
|
|
}
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int at91_cf_get_status(struct pcmcia_socket *s, u_int *sp)
|
|
{
|
|
struct at91_cf_socket *cf;
|
|
|
|
if (!sp)
|
|
return -EINVAL;
|
|
|
|
cf = container_of(s, struct at91_cf_socket, socket);
|
|
|
|
/* NOTE: CF is always 3VCARD */
|
|
if (at91_cf_present(cf)) {
|
|
int rdy = cf->board->irq_pin; /* RDY/nIRQ */
|
|
int vcc = cf->board->vcc_pin;
|
|
|
|
*sp = SS_DETECT | SS_3VCARD;
|
|
if (!rdy || at91_get_gpio_value(rdy))
|
|
*sp |= SS_READY;
|
|
if (!vcc || at91_get_gpio_value(vcc))
|
|
*sp |= SS_POWERON;
|
|
} else
|
|
*sp = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
at91_cf_set_socket(struct pcmcia_socket *sock, struct socket_state_t *s)
|
|
{
|
|
struct at91_cf_socket *cf;
|
|
|
|
cf = container_of(sock, struct at91_cf_socket, socket);
|
|
|
|
/* switch Vcc if needed and possible */
|
|
if (cf->board->vcc_pin) {
|
|
switch (s->Vcc) {
|
|
case 0:
|
|
at91_set_gpio_value(cf->board->vcc_pin, 0);
|
|
break;
|
|
case 33:
|
|
at91_set_gpio_value(cf->board->vcc_pin, 1);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
/* toggle reset if needed */
|
|
at91_set_gpio_value(cf->board->rst_pin, s->flags & SS_RESET);
|
|
|
|
pr_debug("%s: Vcc %d, io_irq %d, flags %04x csc %04x\n",
|
|
driver_name, s->Vcc, s->io_irq, s->flags, s->csc_mask);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int at91_cf_ss_suspend(struct pcmcia_socket *s)
|
|
{
|
|
return at91_cf_set_socket(s, &dead_socket);
|
|
}
|
|
|
|
/* we already mapped the I/O region */
|
|
static int at91_cf_set_io_map(struct pcmcia_socket *s, struct pccard_io_map *io)
|
|
{
|
|
struct at91_cf_socket *cf;
|
|
u32 csr;
|
|
|
|
cf = container_of(s, struct at91_cf_socket, socket);
|
|
io->flags &= (MAP_ACTIVE | MAP_16BIT | MAP_AUTOSZ);
|
|
|
|
/*
|
|
* Use 16 bit accesses unless/until we need 8-bit i/o space.
|
|
*/
|
|
csr = at91_sys_read(AT91_SMC_CSR(cf->board->chipselect)) & ~AT91_SMC_DBW;
|
|
|
|
/*
|
|
* NOTE: this CF controller ignores IOIS16, so we can't really do
|
|
* MAP_AUTOSZ. The 16bit mode allows single byte access on either
|
|
* D0-D7 (even addr) or D8-D15 (odd), so it's close enough for many
|
|
* purposes (and handles ide-cs).
|
|
*
|
|
* The 8bit mode is needed for odd byte access on D0-D7. It seems
|
|
* some cards only like that way to get at the odd byte, despite
|
|
* CF 3.0 spec table 35 also giving the D8-D15 option.
|
|
*/
|
|
if (!(io->flags & (MAP_16BIT | MAP_AUTOSZ))) {
|
|
csr |= AT91_SMC_DBW_8;
|
|
pr_debug("%s: 8bit i/o bus\n", driver_name);
|
|
} else {
|
|
csr |= AT91_SMC_DBW_16;
|
|
pr_debug("%s: 16bit i/o bus\n", driver_name);
|
|
}
|
|
at91_sys_write(AT91_SMC_CSR(cf->board->chipselect), csr);
|
|
|
|
io->start = cf->socket.io_offset;
|
|
io->stop = io->start + SZ_2K - 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* pcmcia layer maps/unmaps mem regions */
|
|
static int
|
|
at91_cf_set_mem_map(struct pcmcia_socket *s, struct pccard_mem_map *map)
|
|
{
|
|
struct at91_cf_socket *cf;
|
|
|
|
if (map->card_start)
|
|
return -EINVAL;
|
|
|
|
cf = container_of(s, struct at91_cf_socket, socket);
|
|
|
|
map->flags &= (MAP_ACTIVE | MAP_ATTRIB | MAP_16BIT);
|
|
if (map->flags & MAP_ATTRIB)
|
|
map->static_start = cf->phys_baseaddr + CF_ATTR_PHYS;
|
|
else
|
|
map->static_start = cf->phys_baseaddr + CF_MEM_PHYS;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct pccard_operations at91_cf_ops = {
|
|
.init = at91_cf_ss_init,
|
|
.suspend = at91_cf_ss_suspend,
|
|
.get_status = at91_cf_get_status,
|
|
.set_socket = at91_cf_set_socket,
|
|
.set_io_map = at91_cf_set_io_map,
|
|
.set_mem_map = at91_cf_set_mem_map,
|
|
};
|
|
|
|
/*--------------------------------------------------------------------------*/
|
|
|
|
static int __init at91_cf_probe(struct platform_device *pdev)
|
|
{
|
|
struct at91_cf_socket *cf;
|
|
struct at91_cf_data *board = pdev->dev.platform_data;
|
|
struct resource *io;
|
|
int status;
|
|
|
|
if (!board || !board->det_pin || !board->rst_pin)
|
|
return -ENODEV;
|
|
|
|
io = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!io)
|
|
return -ENODEV;
|
|
|
|
cf = kzalloc(sizeof *cf, GFP_KERNEL);
|
|
if (!cf)
|
|
return -ENOMEM;
|
|
|
|
cf->board = board;
|
|
cf->pdev = pdev;
|
|
cf->phys_baseaddr = io->start;
|
|
platform_set_drvdata(pdev, cf);
|
|
|
|
/* must be a GPIO; ergo must trigger on both edges */
|
|
status = request_irq(board->det_pin, at91_cf_irq, 0, driver_name, cf);
|
|
if (status < 0)
|
|
goto fail0;
|
|
device_init_wakeup(&pdev->dev, 1);
|
|
|
|
/*
|
|
* The card driver will request this irq later as needed.
|
|
* but it causes lots of "irqNN: nobody cared" messages
|
|
* unless we report that we handle everything (sigh).
|
|
* (Note: DK board doesn't wire the IRQ pin...)
|
|
*/
|
|
if (board->irq_pin) {
|
|
status = request_irq(board->irq_pin, at91_cf_irq,
|
|
IRQF_SHARED, driver_name, cf);
|
|
if (status < 0)
|
|
goto fail0a;
|
|
cf->socket.pci_irq = board->irq_pin;
|
|
} else
|
|
cf->socket.pci_irq = NR_IRQS + 1;
|
|
|
|
/* pcmcia layer only remaps "real" memory not iospace */
|
|
cf->socket.io_offset = (unsigned long) ioremap(cf->phys_baseaddr + CF_IO_PHYS, SZ_2K);
|
|
if (!cf->socket.io_offset) {
|
|
status = -ENXIO;
|
|
goto fail1;
|
|
}
|
|
|
|
/* reserve chip-select regions */
|
|
if (!request_mem_region(io->start, io->end + 1 - io->start,
|
|
driver_name)) {
|
|
status = -ENXIO;
|
|
goto fail1;
|
|
}
|
|
|
|
pr_info("%s: irqs det #%d, io #%d\n", driver_name,
|
|
board->det_pin, board->irq_pin);
|
|
|
|
cf->socket.owner = THIS_MODULE;
|
|
cf->socket.dev.parent = &pdev->dev;
|
|
cf->socket.ops = &at91_cf_ops;
|
|
cf->socket.resource_ops = &pccard_static_ops;
|
|
cf->socket.features = SS_CAP_PCCARD | SS_CAP_STATIC_MAP
|
|
| SS_CAP_MEM_ALIGN;
|
|
cf->socket.map_size = SZ_2K;
|
|
cf->socket.io[0].res = io;
|
|
|
|
status = pcmcia_register_socket(&cf->socket);
|
|
if (status < 0)
|
|
goto fail2;
|
|
|
|
return 0;
|
|
|
|
fail2:
|
|
release_mem_region(io->start, io->end + 1 - io->start);
|
|
fail1:
|
|
if (cf->socket.io_offset)
|
|
iounmap((void __iomem *) cf->socket.io_offset);
|
|
if (board->irq_pin)
|
|
free_irq(board->irq_pin, cf);
|
|
fail0a:
|
|
device_init_wakeup(&pdev->dev, 0);
|
|
free_irq(board->det_pin, cf);
|
|
fail0:
|
|
kfree(cf);
|
|
return status;
|
|
}
|
|
|
|
static int __exit at91_cf_remove(struct platform_device *pdev)
|
|
{
|
|
struct at91_cf_socket *cf = platform_get_drvdata(pdev);
|
|
struct at91_cf_data *board = cf->board;
|
|
struct resource *io = cf->socket.io[0].res;
|
|
|
|
pcmcia_unregister_socket(&cf->socket);
|
|
if (board->irq_pin)
|
|
free_irq(board->irq_pin, cf);
|
|
device_init_wakeup(&pdev->dev, 0);
|
|
free_irq(board->det_pin, cf);
|
|
iounmap((void __iomem *) cf->socket.io_offset);
|
|
release_mem_region(io->start, io->end + 1 - io->start);
|
|
|
|
kfree(cf);
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
|
|
static int at91_cf_suspend(struct platform_device *pdev, pm_message_t mesg)
|
|
{
|
|
struct at91_cf_socket *cf = platform_get_drvdata(pdev);
|
|
struct at91_cf_data *board = cf->board;
|
|
|
|
pcmcia_socket_dev_suspend(&pdev->dev, mesg);
|
|
if (device_may_wakeup(&pdev->dev)) {
|
|
enable_irq_wake(board->det_pin);
|
|
if (board->irq_pin)
|
|
enable_irq_wake(board->irq_pin);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int at91_cf_resume(struct platform_device *pdev)
|
|
{
|
|
struct at91_cf_socket *cf = platform_get_drvdata(pdev);
|
|
struct at91_cf_data *board = cf->board;
|
|
|
|
if (device_may_wakeup(&pdev->dev)) {
|
|
disable_irq_wake(board->det_pin);
|
|
if (board->irq_pin)
|
|
disable_irq_wake(board->irq_pin);
|
|
}
|
|
|
|
pcmcia_socket_dev_resume(&pdev->dev);
|
|
return 0;
|
|
}
|
|
|
|
#else
|
|
#define at91_cf_suspend NULL
|
|
#define at91_cf_resume NULL
|
|
#endif
|
|
|
|
static struct platform_driver at91_cf_driver = {
|
|
.driver = {
|
|
.name = (char *) driver_name,
|
|
.owner = THIS_MODULE,
|
|
},
|
|
.remove = __exit_p(at91_cf_remove),
|
|
.suspend = at91_cf_suspend,
|
|
.resume = at91_cf_resume,
|
|
};
|
|
|
|
/*--------------------------------------------------------------------------*/
|
|
|
|
static int __init at91_cf_init(void)
|
|
{
|
|
return platform_driver_probe(&at91_cf_driver, at91_cf_probe);
|
|
}
|
|
module_init(at91_cf_init);
|
|
|
|
static void __exit at91_cf_exit(void)
|
|
{
|
|
platform_driver_unregister(&at91_cf_driver);
|
|
}
|
|
module_exit(at91_cf_exit);
|
|
|
|
MODULE_DESCRIPTION("AT91 Compact Flash Driver");
|
|
MODULE_AUTHOR("David Brownell");
|
|
MODULE_LICENSE("GPL");
|