linux/fs/Makefile
Al Viro efb170c228 take fs_pin stuff to fs/*
Add a new field to fs_pin - kill(pin).  That's what umount and r/o remount
will be calling for all pins attached to vfsmount and superblock resp.
Called after bumping the refcount, so it won't go away under us.  Dropping
the refcount is responsibility of the instance.  All generic stuff moved to
fs/fs_pin.c; the next step will rip all the knowledge of kernel/acct.c from
fs/super.c and fs/namespace.c.  After that - death to mnt_pin(); it was
intended to be usable as generic mechanism for code that wants to attach
objects to vfsmount, so that they would not make the sucker busy and
would get killed on umount.  Never got it right; it remained acct.c-specific
all along.  Now it's very close to being killable.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-08-07 14:40:08 -04:00

128 lines
4.1 KiB
Makefile

#
# Makefile for the Linux filesystems.
#
# 14 Sep 2000, Christoph Hellwig <hch@infradead.org>
# Rewritten to use lists instead of if-statements.
#
obj-y := open.o read_write.o file_table.o super.o \
char_dev.o stat.o exec.o pipe.o namei.o fcntl.o \
ioctl.o readdir.o select.o dcache.o inode.o \
attr.o bad_inode.o file.o filesystems.o namespace.o \
seq_file.o xattr.o libfs.o fs-writeback.o \
pnode.o splice.o sync.o utimes.o \
stack.o fs_struct.o statfs.o fs_pin.o
ifeq ($(CONFIG_BLOCK),y)
obj-y += buffer.o block_dev.o direct-io.o mpage.o
else
obj-y += no-block.o
endif
obj-$(CONFIG_PROC_FS) += proc_namespace.o
obj-y += notify/
obj-$(CONFIG_EPOLL) += eventpoll.o
obj-$(CONFIG_ANON_INODES) += anon_inodes.o
obj-$(CONFIG_SIGNALFD) += signalfd.o
obj-$(CONFIG_TIMERFD) += timerfd.o
obj-$(CONFIG_EVENTFD) += eventfd.o
obj-$(CONFIG_AIO) += aio.o
obj-$(CONFIG_FILE_LOCKING) += locks.o
obj-$(CONFIG_COMPAT) += compat.o compat_ioctl.o
obj-$(CONFIG_BINFMT_AOUT) += binfmt_aout.o
obj-$(CONFIG_BINFMT_EM86) += binfmt_em86.o
obj-$(CONFIG_BINFMT_MISC) += binfmt_misc.o
obj-$(CONFIG_BINFMT_SCRIPT) += binfmt_script.o
obj-$(CONFIG_BINFMT_ELF) += binfmt_elf.o
obj-$(CONFIG_COMPAT_BINFMT_ELF) += compat_binfmt_elf.o
obj-$(CONFIG_BINFMT_ELF_FDPIC) += binfmt_elf_fdpic.o
obj-$(CONFIG_BINFMT_SOM) += binfmt_som.o
obj-$(CONFIG_BINFMT_FLAT) += binfmt_flat.o
obj-$(CONFIG_FS_MBCACHE) += mbcache.o
obj-$(CONFIG_FS_POSIX_ACL) += posix_acl.o
obj-$(CONFIG_NFS_COMMON) += nfs_common/
obj-$(CONFIG_COREDUMP) += coredump.o
obj-$(CONFIG_SYSCTL) += drop_caches.o
obj-$(CONFIG_FHANDLE) += fhandle.o
obj-y += quota/
obj-$(CONFIG_PROC_FS) += proc/
obj-$(CONFIG_KERNFS) += kernfs/
obj-$(CONFIG_SYSFS) += sysfs/
obj-$(CONFIG_CONFIGFS_FS) += configfs/
obj-y += devpts/
obj-$(CONFIG_PROFILING) += dcookies.o
obj-$(CONFIG_DLM) += dlm/
# Do not add any filesystems before this line
obj-$(CONFIG_FSCACHE) += fscache/
obj-$(CONFIG_REISERFS_FS) += reiserfs/
obj-$(CONFIG_EXT3_FS) += ext3/ # Before ext2 so root fs can be ext3
obj-$(CONFIG_EXT2_FS) += ext2/
# We place ext4 after ext2 so plain ext2 root fs's are mounted using ext2
# unless explicitly requested by rootfstype
obj-$(CONFIG_EXT4_FS) += ext4/
obj-$(CONFIG_JBD) += jbd/
obj-$(CONFIG_JBD2) += jbd2/
obj-$(CONFIG_CRAMFS) += cramfs/
obj-$(CONFIG_SQUASHFS) += squashfs/
obj-y += ramfs/
obj-$(CONFIG_HUGETLBFS) += hugetlbfs/
obj-$(CONFIG_CODA_FS) += coda/
obj-$(CONFIG_MINIX_FS) += minix/
obj-$(CONFIG_FAT_FS) += fat/
obj-$(CONFIG_BFS_FS) += bfs/
obj-$(CONFIG_ISO9660_FS) += isofs/
obj-$(CONFIG_HFSPLUS_FS) += hfsplus/ # Before hfs to find wrapped HFS+
obj-$(CONFIG_HFS_FS) += hfs/
obj-$(CONFIG_ECRYPT_FS) += ecryptfs/
obj-$(CONFIG_VXFS_FS) += freevxfs/
obj-$(CONFIG_NFS_FS) += nfs/
obj-$(CONFIG_EXPORTFS) += exportfs/
obj-$(CONFIG_NFSD) += nfsd/
obj-$(CONFIG_LOCKD) += lockd/
obj-$(CONFIG_NLS) += nls/
obj-$(CONFIG_SYSV_FS) += sysv/
obj-$(CONFIG_CIFS) += cifs/
obj-$(CONFIG_NCP_FS) += ncpfs/
obj-$(CONFIG_HPFS_FS) += hpfs/
obj-$(CONFIG_NTFS_FS) += ntfs/
obj-$(CONFIG_UFS_FS) += ufs/
obj-$(CONFIG_EFS_FS) += efs/
obj-$(CONFIG_JFFS2_FS) += jffs2/
obj-$(CONFIG_LOGFS) += logfs/
obj-$(CONFIG_UBIFS_FS) += ubifs/
obj-$(CONFIG_AFFS_FS) += affs/
obj-$(CONFIG_ROMFS_FS) += romfs/
obj-$(CONFIG_QNX4FS_FS) += qnx4/
obj-$(CONFIG_QNX6FS_FS) += qnx6/
obj-$(CONFIG_AUTOFS4_FS) += autofs4/
obj-$(CONFIG_ADFS_FS) += adfs/
obj-$(CONFIG_FUSE_FS) += fuse/
obj-$(CONFIG_UDF_FS) += udf/
obj-$(CONFIG_SUN_OPENPROMFS) += openpromfs/
obj-$(CONFIG_OMFS_FS) += omfs/
obj-$(CONFIG_JFS_FS) += jfs/
obj-$(CONFIG_XFS_FS) += xfs/
obj-$(CONFIG_9P_FS) += 9p/
obj-$(CONFIG_AFS_FS) += afs/
obj-$(CONFIG_NILFS2_FS) += nilfs2/
obj-$(CONFIG_BEFS_FS) += befs/
obj-$(CONFIG_HOSTFS) += hostfs/
obj-$(CONFIG_HPPFS) += hppfs/
obj-$(CONFIG_CACHEFILES) += cachefiles/
obj-$(CONFIG_DEBUG_FS) += debugfs/
obj-$(CONFIG_OCFS2_FS) += ocfs2/
obj-$(CONFIG_BTRFS_FS) += btrfs/
obj-$(CONFIG_GFS2_FS) += gfs2/
obj-$(CONFIG_F2FS_FS) += f2fs/
obj-y += exofs/ # Multiple modules
obj-$(CONFIG_CEPH_FS) += ceph/
obj-$(CONFIG_PSTORE) += pstore/
obj-$(CONFIG_EFIVAR_FS) += efivarfs/