mirror of
https://github.com/torvalds/linux.git
synced 2024-11-14 08:02:07 +00:00
7d12e780e0
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.
The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around. On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).
Where appropriate, an arch may override the generic storage facility and do
something different with the variable. On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.
Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions. Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller. A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.
I've build this code with allyesconfig for x86_64 and i386. I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.
This will affect all archs. Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:
struct pt_regs *old_regs = set_irq_regs(regs);
And put the old one back at the end:
set_irq_regs(old_regs);
Don't pass regs through to generic_handle_irq() or __do_IRQ().
In timer_interrupt(), this sort of change will be necessary:
- update_process_times(user_mode(regs));
- profile_tick(CPU_PROFILING, regs);
+ update_process_times(user_mode(get_irq_regs()));
+ profile_tick(CPU_PROFILING);
I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().
Some notes on the interrupt handling in the drivers:
(*) input_dev() is now gone entirely. The regs pointer is no longer stored in
the input_dev struct.
(*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does
something different depending on whether it's been supplied with a regs
pointer or not.
(*) Various IRQ handler function pointers have been moved to type
irq_handler_t.
Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
1604 lines
75 KiB
C
1604 lines
75 KiB
C
#ifndef __SOUND_EMU10K1_H
|
|
#define __SOUND_EMU10K1_H
|
|
|
|
/*
|
|
* Copyright (c) by Jaroslav Kysela <perex@suse.cz>,
|
|
* Creative Labs, Inc.
|
|
* Definitions for EMU10K1 (SB Live!) chips
|
|
*
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*
|
|
*/
|
|
|
|
#ifdef __KERNEL__
|
|
|
|
#include <sound/pcm.h>
|
|
#include <sound/rawmidi.h>
|
|
#include <sound/hwdep.h>
|
|
#include <sound/ac97_codec.h>
|
|
#include <sound/util_mem.h>
|
|
#include <sound/pcm-indirect.h>
|
|
#include <sound/timer.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/mutex.h>
|
|
#include <asm/io.h>
|
|
|
|
/* ------------------- DEFINES -------------------- */
|
|
|
|
#define EMUPAGESIZE 4096
|
|
#define MAXREQVOICES 8
|
|
#define MAXPAGES 8192
|
|
#define RESERVED 0
|
|
#define NUM_MIDI 16
|
|
#define NUM_G 64 /* use all channels */
|
|
#define NUM_FXSENDS 4
|
|
#define NUM_EFX_PLAYBACK 16
|
|
|
|
/* FIXME? - according to the OSS driver the EMU10K1 needs a 29 bit DMA mask */
|
|
#define EMU10K1_DMA_MASK 0x7fffffffUL /* 31bit */
|
|
#define AUDIGY_DMA_MASK 0x7fffffffUL /* 31bit FIXME - 32 should work? */
|
|
/* See ALSA bug #1276 - rlrevell */
|
|
|
|
#define TMEMSIZE 256*1024
|
|
#define TMEMSIZEREG 4
|
|
|
|
#define IP_TO_CP(ip) ((ip == 0) ? 0 : (((0x00001000uL | (ip & 0x00000FFFL)) << (((ip >> 12) & 0x000FL) + 4)) & 0xFFFF0000uL))
|
|
|
|
// Audigy specify registers are prefixed with 'A_'
|
|
|
|
/************************************************************************************************/
|
|
/* PCI function 0 registers, address = <val> + PCIBASE0 */
|
|
/************************************************************************************************/
|
|
|
|
#define PTR 0x00 /* Indexed register set pointer register */
|
|
/* NOTE: The CHANNELNUM and ADDRESS words can */
|
|
/* be modified independently of each other. */
|
|
#define PTR_CHANNELNUM_MASK 0x0000003f /* For each per-channel register, indicates the */
|
|
/* channel number of the register to be */
|
|
/* accessed. For non per-channel registers the */
|
|
/* value should be set to zero. */
|
|
#define PTR_ADDRESS_MASK 0x07ff0000 /* Register index */
|
|
#define A_PTR_ADDRESS_MASK 0x0fff0000
|
|
|
|
#define DATA 0x04 /* Indexed register set data register */
|
|
|
|
#define IPR 0x08 /* Global interrupt pending register */
|
|
/* Clear pending interrupts by writing a 1 to */
|
|
/* the relevant bits and zero to the other bits */
|
|
#define IPR_P16V 0x80000000 /* Bit set when the CA0151 P16V chip wishes
|
|
to interrupt */
|
|
#define IPR_GPIOMSG 0x20000000 /* GPIO message interrupt (RE'd, still not sure
|
|
which INTE bits enable it) */
|
|
|
|
/* The next two interrupts are for the midi port on the Audigy Drive (A_MPU1) */
|
|
#define IPR_A_MIDITRANSBUFEMPTY2 0x10000000 /* MIDI UART transmit buffer empty */
|
|
#define IPR_A_MIDIRECVBUFEMPTY2 0x08000000 /* MIDI UART receive buffer empty */
|
|
|
|
#define IPR_SPDIFBUFFULL 0x04000000 /* SPDIF capture related, 10k2 only? (RE) */
|
|
#define IPR_SPDIFBUFHALFFULL 0x02000000 /* SPDIF capture related? (RE) */
|
|
|
|
#define IPR_SAMPLERATETRACKER 0x01000000 /* Sample rate tracker lock status change */
|
|
#define IPR_FXDSP 0x00800000 /* Enable FX DSP interrupts */
|
|
#define IPR_FORCEINT 0x00400000 /* Force Sound Blaster interrupt */
|
|
#define IPR_PCIERROR 0x00200000 /* PCI bus error */
|
|
#define IPR_VOLINCR 0x00100000 /* Volume increment button pressed */
|
|
#define IPR_VOLDECR 0x00080000 /* Volume decrement button pressed */
|
|
#define IPR_MUTE 0x00040000 /* Mute button pressed */
|
|
#define IPR_MICBUFFULL 0x00020000 /* Microphone buffer full */
|
|
#define IPR_MICBUFHALFFULL 0x00010000 /* Microphone buffer half full */
|
|
#define IPR_ADCBUFFULL 0x00008000 /* ADC buffer full */
|
|
#define IPR_ADCBUFHALFFULL 0x00004000 /* ADC buffer half full */
|
|
#define IPR_EFXBUFFULL 0x00002000 /* Effects buffer full */
|
|
#define IPR_EFXBUFHALFFULL 0x00001000 /* Effects buffer half full */
|
|
#define IPR_GPSPDIFSTATUSCHANGE 0x00000800 /* GPSPDIF channel status change */
|
|
#define IPR_CDROMSTATUSCHANGE 0x00000400 /* CD-ROM channel status change */
|
|
#define IPR_INTERVALTIMER 0x00000200 /* Interval timer terminal count */
|
|
#define IPR_MIDITRANSBUFEMPTY 0x00000100 /* MIDI UART transmit buffer empty */
|
|
#define IPR_MIDIRECVBUFEMPTY 0x00000080 /* MIDI UART receive buffer empty */
|
|
#define IPR_CHANNELLOOP 0x00000040 /* Channel (half) loop interrupt(s) pending */
|
|
#define IPR_CHANNELNUMBERMASK 0x0000003f /* When IPR_CHANNELLOOP is set, indicates the */
|
|
/* highest set channel in CLIPL, CLIPH, HLIPL, */
|
|
/* or HLIPH. When IP is written with CL set, */
|
|
/* the bit in H/CLIPL or H/CLIPH corresponding */
|
|
/* to the CIN value written will be cleared. */
|
|
|
|
#define INTE 0x0c /* Interrupt enable register */
|
|
#define INTE_VIRTUALSB_MASK 0xc0000000 /* Virtual Soundblaster I/O port capture */
|
|
#define INTE_VIRTUALSB_220 0x00000000 /* Capture at I/O base address 0x220-0x22f */
|
|
#define INTE_VIRTUALSB_240 0x40000000 /* Capture at I/O base address 0x240 */
|
|
#define INTE_VIRTUALSB_260 0x80000000 /* Capture at I/O base address 0x260 */
|
|
#define INTE_VIRTUALSB_280 0xc0000000 /* Capture at I/O base address 0x280 */
|
|
#define INTE_VIRTUALMPU_MASK 0x30000000 /* Virtual MPU I/O port capture */
|
|
#define INTE_VIRTUALMPU_300 0x00000000 /* Capture at I/O base address 0x300-0x301 */
|
|
#define INTE_VIRTUALMPU_310 0x10000000 /* Capture at I/O base address 0x310 */
|
|
#define INTE_VIRTUALMPU_320 0x20000000 /* Capture at I/O base address 0x320 */
|
|
#define INTE_VIRTUALMPU_330 0x30000000 /* Capture at I/O base address 0x330 */
|
|
#define INTE_MASTERDMAENABLE 0x08000000 /* Master DMA emulation at 0x000-0x00f */
|
|
#define INTE_SLAVEDMAENABLE 0x04000000 /* Slave DMA emulation at 0x0c0-0x0df */
|
|
#define INTE_MASTERPICENABLE 0x02000000 /* Master PIC emulation at 0x020-0x021 */
|
|
#define INTE_SLAVEPICENABLE 0x01000000 /* Slave PIC emulation at 0x0a0-0x0a1 */
|
|
#define INTE_VSBENABLE 0x00800000 /* Enable virtual Soundblaster */
|
|
#define INTE_ADLIBENABLE 0x00400000 /* Enable AdLib emulation at 0x388-0x38b */
|
|
#define INTE_MPUENABLE 0x00200000 /* Enable virtual MPU */
|
|
#define INTE_FORCEINT 0x00100000 /* Continuously assert INTAN */
|
|
|
|
#define INTE_MRHANDENABLE 0x00080000 /* Enable the "Mr. Hand" logic */
|
|
/* NOTE: There is no reason to use this under */
|
|
/* Linux, and it will cause odd hardware */
|
|
/* behavior and possibly random segfaults and */
|
|
/* lockups if enabled. */
|
|
|
|
/* The next two interrupts are for the midi port on the Audigy Drive (A_MPU1) */
|
|
#define INTE_A_MIDITXENABLE2 0x00020000 /* Enable MIDI transmit-buffer-empty interrupts */
|
|
#define INTE_A_MIDIRXENABLE2 0x00010000 /* Enable MIDI receive-buffer-empty interrupts */
|
|
|
|
|
|
#define INTE_SAMPLERATETRACKER 0x00002000 /* Enable sample rate tracker interrupts */
|
|
/* NOTE: This bit must always be enabled */
|
|
#define INTE_FXDSPENABLE 0x00001000 /* Enable FX DSP interrupts */
|
|
#define INTE_PCIERRORENABLE 0x00000800 /* Enable PCI bus error interrupts */
|
|
#define INTE_VOLINCRENABLE 0x00000400 /* Enable volume increment button interrupts */
|
|
#define INTE_VOLDECRENABLE 0x00000200 /* Enable volume decrement button interrupts */
|
|
#define INTE_MUTEENABLE 0x00000100 /* Enable mute button interrupts */
|
|
#define INTE_MICBUFENABLE 0x00000080 /* Enable microphone buffer interrupts */
|
|
#define INTE_ADCBUFENABLE 0x00000040 /* Enable ADC buffer interrupts */
|
|
#define INTE_EFXBUFENABLE 0x00000020 /* Enable Effects buffer interrupts */
|
|
#define INTE_GPSPDIFENABLE 0x00000010 /* Enable GPSPDIF status interrupts */
|
|
#define INTE_CDSPDIFENABLE 0x00000008 /* Enable CDSPDIF status interrupts */
|
|
#define INTE_INTERVALTIMERENB 0x00000004 /* Enable interval timer interrupts */
|
|
#define INTE_MIDITXENABLE 0x00000002 /* Enable MIDI transmit-buffer-empty interrupts */
|
|
#define INTE_MIDIRXENABLE 0x00000001 /* Enable MIDI receive-buffer-empty interrupts */
|
|
|
|
#define WC 0x10 /* Wall Clock register */
|
|
#define WC_SAMPLECOUNTER_MASK 0x03FFFFC0 /* Sample periods elapsed since reset */
|
|
#define WC_SAMPLECOUNTER 0x14060010
|
|
#define WC_CURRENTCHANNEL 0x0000003F /* Channel [0..63] currently being serviced */
|
|
/* NOTE: Each channel takes 1/64th of a sample */
|
|
/* period to be serviced. */
|
|
|
|
#define HCFG 0x14 /* Hardware config register */
|
|
/* NOTE: There is no reason to use the legacy */
|
|
/* SoundBlaster emulation stuff described below */
|
|
/* under Linux, and all kinds of weird hardware */
|
|
/* behavior can result if you try. Don't. */
|
|
#define HCFG_LEGACYFUNC_MASK 0xe0000000 /* Legacy function number */
|
|
#define HCFG_LEGACYFUNC_MPU 0x00000000 /* Legacy MPU */
|
|
#define HCFG_LEGACYFUNC_SB 0x40000000 /* Legacy SB */
|
|
#define HCFG_LEGACYFUNC_AD 0x60000000 /* Legacy AD */
|
|
#define HCFG_LEGACYFUNC_MPIC 0x80000000 /* Legacy MPIC */
|
|
#define HCFG_LEGACYFUNC_MDMA 0xa0000000 /* Legacy MDMA */
|
|
#define HCFG_LEGACYFUNC_SPCI 0xc0000000 /* Legacy SPCI */
|
|
#define HCFG_LEGACYFUNC_SDMA 0xe0000000 /* Legacy SDMA */
|
|
#define HCFG_IOCAPTUREADDR 0x1f000000 /* The 4 LSBs of the captured I/O address. */
|
|
#define HCFG_LEGACYWRITE 0x00800000 /* 1 = write, 0 = read */
|
|
#define HCFG_LEGACYWORD 0x00400000 /* 1 = word, 0 = byte */
|
|
#define HCFG_LEGACYINT 0x00200000 /* 1 = legacy event captured. Write 1 to clear. */
|
|
/* NOTE: The rest of the bits in this register */
|
|
/* _are_ relevant under Linux. */
|
|
#define HCFG_CODECFORMAT_MASK 0x00070000 /* CODEC format */
|
|
#define HCFG_CODECFORMAT_AC97 0x00000000 /* AC97 CODEC format -- Primary Output */
|
|
#define HCFG_CODECFORMAT_I2S 0x00010000 /* I2S CODEC format -- Secondary (Rear) Output */
|
|
#define HCFG_GPINPUT0 0x00004000 /* External pin112 */
|
|
#define HCFG_GPINPUT1 0x00002000 /* External pin110 */
|
|
#define HCFG_GPOUTPUT_MASK 0x00001c00 /* External pins which may be controlled */
|
|
#define HCFG_GPOUT0 0x00001000 /* External pin? (spdif enable on 5.1) */
|
|
#define HCFG_GPOUT1 0x00000800 /* External pin? (IR) */
|
|
#define HCFG_GPOUT2 0x00000400 /* External pin? (IR) */
|
|
#define HCFG_JOYENABLE 0x00000200 /* Internal joystick enable */
|
|
#define HCFG_PHASETRACKENABLE 0x00000100 /* Phase tracking enable */
|
|
/* 1 = Force all 3 async digital inputs to use */
|
|
/* the same async sample rate tracker (ZVIDEO) */
|
|
#define HCFG_AC3ENABLE_MASK 0x000000e0 /* AC3 async input control - Not implemented */
|
|
#define HCFG_AC3ENABLE_ZVIDEO 0x00000080 /* Channels 0 and 1 replace ZVIDEO */
|
|
#define HCFG_AC3ENABLE_CDSPDIF 0x00000040 /* Channels 0 and 1 replace CDSPDIF */
|
|
#define HCFG_AC3ENABLE_GPSPDIF 0x00000020 /* Channels 0 and 1 replace GPSPDIF */
|
|
#define HCFG_AUTOMUTE 0x00000010 /* When set, the async sample rate convertors */
|
|
/* will automatically mute their output when */
|
|
/* they are not rate-locked to the external */
|
|
/* async audio source */
|
|
#define HCFG_LOCKSOUNDCACHE 0x00000008 /* 1 = Cancel bustmaster accesses to soundcache */
|
|
/* NOTE: This should generally never be used. */
|
|
#define HCFG_LOCKTANKCACHE_MASK 0x00000004 /* 1 = Cancel bustmaster accesses to tankcache */
|
|
/* NOTE: This should generally never be used. */
|
|
#define HCFG_LOCKTANKCACHE 0x01020014
|
|
#define HCFG_MUTEBUTTONENABLE 0x00000002 /* 1 = Master mute button sets AUDIOENABLE = 0. */
|
|
/* NOTE: This is a 'cheap' way to implement a */
|
|
/* master mute function on the mute button, and */
|
|
/* in general should not be used unless a more */
|
|
/* sophisticated master mute function has not */
|
|
/* been written. */
|
|
#define HCFG_AUDIOENABLE 0x00000001 /* 0 = CODECs transmit zero-valued samples */
|
|
/* Should be set to 1 when the EMU10K1 is */
|
|
/* completely initialized. */
|
|
|
|
//For Audigy, MPU port move to 0x70-0x74 ptr register
|
|
|
|
#define MUDATA 0x18 /* MPU401 data register (8 bits) */
|
|
|
|
#define MUCMD 0x19 /* MPU401 command register (8 bits) */
|
|
#define MUCMD_RESET 0xff /* RESET command */
|
|
#define MUCMD_ENTERUARTMODE 0x3f /* Enter_UART_mode command */
|
|
/* NOTE: All other commands are ignored */
|
|
|
|
#define MUSTAT MUCMD /* MPU401 status register (8 bits) */
|
|
#define MUSTAT_IRDYN 0x80 /* 0 = MIDI data or command ACK */
|
|
#define MUSTAT_ORDYN 0x40 /* 0 = MUDATA can accept a command or data */
|
|
|
|
#define A_IOCFG 0x18 /* GPIO on Audigy card (16bits) */
|
|
#define A_GPINPUT_MASK 0xff00
|
|
#define A_GPOUTPUT_MASK 0x00ff
|
|
|
|
// Audigy output/GPIO stuff taken from the kX drivers
|
|
#define A_IOCFG_GPOUT0 0x0044 /* analog/digital */
|
|
#define A_IOCFG_DISABLE_ANALOG 0x0040 /* = 'enable' for Audigy2 (chiprev=4) */
|
|
#define A_IOCFG_ENABLE_DIGITAL 0x0004
|
|
#define A_IOCFG_ENABLE_DIGITAL_AUDIGY4 0x0080
|
|
#define A_IOCFG_UNKNOWN_20 0x0020
|
|
#define A_IOCFG_DISABLE_AC97_FRONT 0x0080 /* turn off ac97 front -> front (10k2.1) */
|
|
#define A_IOCFG_GPOUT1 0x0002 /* IR? drive's internal bypass (?) */
|
|
#define A_IOCFG_GPOUT2 0x0001 /* IR */
|
|
#define A_IOCFG_MULTIPURPOSE_JACK 0x2000 /* center+lfe+rear_center (a2/a2ex) */
|
|
/* + digital for generic 10k2 */
|
|
#define A_IOCFG_DIGITAL_JACK 0x1000 /* digital for a2 platinum */
|
|
#define A_IOCFG_FRONT_JACK 0x4000
|
|
#define A_IOCFG_REAR_JACK 0x8000
|
|
#define A_IOCFG_PHONES_JACK 0x0100 /* LiveDrive */
|
|
|
|
/* outputs:
|
|
* for audigy2 platinum: 0xa00
|
|
* for a2 platinum ex: 0x1c00
|
|
* for a1 platinum: 0x0
|
|
*/
|
|
|
|
#define TIMER 0x1a /* Timer terminal count register */
|
|
/* NOTE: After the rate is changed, a maximum */
|
|
/* of 1024 sample periods should be allowed */
|
|
/* before the new rate is guaranteed accurate. */
|
|
#define TIMER_RATE_MASK 0x000003ff /* Timer interrupt rate in sample periods */
|
|
/* 0 == 1024 periods, [1..4] are not useful */
|
|
#define TIMER_RATE 0x0a00001a
|
|
|
|
#define AC97DATA 0x1c /* AC97 register set data register (16 bit) */
|
|
|
|
#define AC97ADDRESS 0x1e /* AC97 register set address register (8 bit) */
|
|
#define AC97ADDRESS_READY 0x80 /* Read-only bit, reflects CODEC READY signal */
|
|
#define AC97ADDRESS_ADDRESS 0x7f /* Address of indexed AC97 register */
|
|
|
|
/* Available on the Audigy 2 and Audigy 4 only. This is the P16V chip. */
|
|
#define PTR2 0x20 /* Indexed register set pointer register */
|
|
#define DATA2 0x24 /* Indexed register set data register */
|
|
#define IPR2 0x28 /* P16V interrupt pending register */
|
|
#define IPR2_PLAYBACK_CH_0_LOOP 0x00001000 /* Playback Channel 0 loop */
|
|
#define IPR2_PLAYBACK_CH_0_HALF_LOOP 0x00000100 /* Playback Channel 0 half loop */
|
|
#define IPR2_CAPTURE_CH_0_LOOP 0x00100000 /* Capture Channel 0 loop */
|
|
#define IPR2_CAPTURE_CH_0_HALF_LOOP 0x00010000 /* Capture Channel 0 half loop */
|
|
/* 0x00000100 Playback. Only in once per period.
|
|
* 0x00110000 Capture. Int on half buffer.
|
|
*/
|
|
#define INTE2 0x2c /* P16V Interrupt enable register. */
|
|
#define INTE2_PLAYBACK_CH_0_LOOP 0x00001000 /* Playback Channel 0 loop */
|
|
#define INTE2_PLAYBACK_CH_0_HALF_LOOP 0x00000100 /* Playback Channel 0 half loop */
|
|
#define INTE2_PLAYBACK_CH_1_LOOP 0x00002000 /* Playback Channel 1 loop */
|
|
#define INTE2_PLAYBACK_CH_1_HALF_LOOP 0x00000200 /* Playback Channel 1 half loop */
|
|
#define INTE2_PLAYBACK_CH_2_LOOP 0x00004000 /* Playback Channel 2 loop */
|
|
#define INTE2_PLAYBACK_CH_2_HALF_LOOP 0x00000400 /* Playback Channel 2 half loop */
|
|
#define INTE2_PLAYBACK_CH_3_LOOP 0x00008000 /* Playback Channel 3 loop */
|
|
#define INTE2_PLAYBACK_CH_3_HALF_LOOP 0x00000800 /* Playback Channel 3 half loop */
|
|
#define INTE2_CAPTURE_CH_0_LOOP 0x00100000 /* Capture Channel 0 loop */
|
|
#define INTE2_CAPTURE_CH_0_HALF_LOOP 0x00010000 /* Caputre Channel 0 half loop */
|
|
#define HCFG2 0x34 /* Defaults: 0, win2000 sets it to 00004201 */
|
|
/* 0x00000000 2-channel output. */
|
|
/* 0x00000200 8-channel output. */
|
|
/* 0x00000004 pauses stream/irq fail. */
|
|
/* Rest of bits no nothing to sound output */
|
|
/* bit 0: Enable P16V audio.
|
|
* bit 1: Lock P16V record memory cache.
|
|
* bit 2: Lock P16V playback memory cache.
|
|
* bit 3: Dummy record insert zero samples.
|
|
* bit 8: Record 8-channel in phase.
|
|
* bit 9: Playback 8-channel in phase.
|
|
* bit 11-12: Playback mixer attenuation: 0=0dB, 1=-6dB, 2=-12dB, 3=Mute.
|
|
* bit 13: Playback mixer enable.
|
|
* bit 14: Route SRC48 mixer output to fx engine.
|
|
* bit 15: Enable IEEE 1394 chip.
|
|
*/
|
|
#define IPR3 0x38 /* Cdif interrupt pending register */
|
|
#define INTE3 0x3c /* Cdif interrupt enable register. */
|
|
/************************************************************************************************/
|
|
/* PCI function 1 registers, address = <val> + PCIBASE1 */
|
|
/************************************************************************************************/
|
|
|
|
#define JOYSTICK1 0x00 /* Analog joystick port register */
|
|
#define JOYSTICK2 0x01 /* Analog joystick port register */
|
|
#define JOYSTICK3 0x02 /* Analog joystick port register */
|
|
#define JOYSTICK4 0x03 /* Analog joystick port register */
|
|
#define JOYSTICK5 0x04 /* Analog joystick port register */
|
|
#define JOYSTICK6 0x05 /* Analog joystick port register */
|
|
#define JOYSTICK7 0x06 /* Analog joystick port register */
|
|
#define JOYSTICK8 0x07 /* Analog joystick port register */
|
|
|
|
/* When writing, any write causes JOYSTICK_COMPARATOR output enable to be pulsed on write. */
|
|
/* When reading, use these bitfields: */
|
|
#define JOYSTICK_BUTTONS 0x0f /* Joystick button data */
|
|
#define JOYSTICK_COMPARATOR 0xf0 /* Joystick comparator data */
|
|
|
|
|
|
/********************************************************************************************************/
|
|
/* Emu10k1 pointer-offset register set, accessed through the PTR and DATA registers */
|
|
/********************************************************************************************************/
|
|
|
|
#define CPF 0x00 /* Current pitch and fraction register */
|
|
#define CPF_CURRENTPITCH_MASK 0xffff0000 /* Current pitch (linear, 0x4000 == unity pitch shift) */
|
|
#define CPF_CURRENTPITCH 0x10100000
|
|
#define CPF_STEREO_MASK 0x00008000 /* 1 = Even channel interleave, odd channel locked */
|
|
#define CPF_STOP_MASK 0x00004000 /* 1 = Current pitch forced to 0 */
|
|
#define CPF_FRACADDRESS_MASK 0x00003fff /* Linear fractional address of the current channel */
|
|
|
|
#define PTRX 0x01 /* Pitch target and send A/B amounts register */
|
|
#define PTRX_PITCHTARGET_MASK 0xffff0000 /* Pitch target of specified channel */
|
|
#define PTRX_PITCHTARGET 0x10100001
|
|
#define PTRX_FXSENDAMOUNT_A_MASK 0x0000ff00 /* Linear level of channel output sent to FX send bus A */
|
|
#define PTRX_FXSENDAMOUNT_A 0x08080001
|
|
#define PTRX_FXSENDAMOUNT_B_MASK 0x000000ff /* Linear level of channel output sent to FX send bus B */
|
|
#define PTRX_FXSENDAMOUNT_B 0x08000001
|
|
|
|
#define CVCF 0x02 /* Current volume and filter cutoff register */
|
|
#define CVCF_CURRENTVOL_MASK 0xffff0000 /* Current linear volume of specified channel */
|
|
#define CVCF_CURRENTVOL 0x10100002
|
|
#define CVCF_CURRENTFILTER_MASK 0x0000ffff /* Current filter cutoff frequency of specified channel */
|
|
#define CVCF_CURRENTFILTER 0x10000002
|
|
|
|
#define VTFT 0x03 /* Volume target and filter cutoff target register */
|
|
#define VTFT_VOLUMETARGET_MASK 0xffff0000 /* Volume target of specified channel */
|
|
#define VTFT_VOLUMETARGET 0x10100003
|
|
#define VTFT_FILTERTARGET_MASK 0x0000ffff /* Filter cutoff target of specified channel */
|
|
#define VTFT_FILTERTARGET 0x10000003
|
|
|
|
#define Z1 0x05 /* Filter delay memory 1 register */
|
|
|
|
#define Z2 0x04 /* Filter delay memory 2 register */
|
|
|
|
#define PSST 0x06 /* Send C amount and loop start address register */
|
|
#define PSST_FXSENDAMOUNT_C_MASK 0xff000000 /* Linear level of channel output sent to FX send bus C */
|
|
|
|
#define PSST_FXSENDAMOUNT_C 0x08180006
|
|
|
|
#define PSST_LOOPSTARTADDR_MASK 0x00ffffff /* Loop start address of the specified channel */
|
|
#define PSST_LOOPSTARTADDR 0x18000006
|
|
|
|
#define DSL 0x07 /* Send D amount and loop start address register */
|
|
#define DSL_FXSENDAMOUNT_D_MASK 0xff000000 /* Linear level of channel output sent to FX send bus D */
|
|
|
|
#define DSL_FXSENDAMOUNT_D 0x08180007
|
|
|
|
#define DSL_LOOPENDADDR_MASK 0x00ffffff /* Loop end address of the specified channel */
|
|
#define DSL_LOOPENDADDR 0x18000007
|
|
|
|
#define CCCA 0x08 /* Filter Q, interp. ROM, byte size, cur. addr register */
|
|
#define CCCA_RESONANCE 0xf0000000 /* Lowpass filter resonance (Q) height */
|
|
#define CCCA_INTERPROMMASK 0x0e000000 /* Selects passband of interpolation ROM */
|
|
/* 1 == full band, 7 == lowpass */
|
|
/* ROM 0 is used when pitch shifting downward or less */
|
|
/* then 3 semitones upward. Increasingly higher ROM */
|
|
/* numbers are used, typically in steps of 3 semitones, */
|
|
/* as upward pitch shifting is performed. */
|
|
#define CCCA_INTERPROM_0 0x00000000 /* Select interpolation ROM 0 */
|
|
#define CCCA_INTERPROM_1 0x02000000 /* Select interpolation ROM 1 */
|
|
#define CCCA_INTERPROM_2 0x04000000 /* Select interpolation ROM 2 */
|
|
#define CCCA_INTERPROM_3 0x06000000 /* Select interpolation ROM 3 */
|
|
#define CCCA_INTERPROM_4 0x08000000 /* Select interpolation ROM 4 */
|
|
#define CCCA_INTERPROM_5 0x0a000000 /* Select interpolation ROM 5 */
|
|
#define CCCA_INTERPROM_6 0x0c000000 /* Select interpolation ROM 6 */
|
|
#define CCCA_INTERPROM_7 0x0e000000 /* Select interpolation ROM 7 */
|
|
#define CCCA_8BITSELECT 0x01000000 /* 1 = Sound memory for this channel uses 8-bit samples */
|
|
#define CCCA_CURRADDR_MASK 0x00ffffff /* Current address of the selected channel */
|
|
#define CCCA_CURRADDR 0x18000008
|
|
|
|
#define CCR 0x09 /* Cache control register */
|
|
#define CCR_CACHEINVALIDSIZE 0x07190009
|
|
#define CCR_CACHEINVALIDSIZE_MASK 0xfe000000 /* Number of invalid samples cache for this channel */
|
|
#define CCR_CACHELOOPFLAG 0x01000000 /* 1 = Cache has a loop service pending */
|
|
#define CCR_INTERLEAVEDSAMPLES 0x00800000 /* 1 = A cache service will fetch interleaved samples */
|
|
#define CCR_WORDSIZEDSAMPLES 0x00400000 /* 1 = A cache service will fetch word sized samples */
|
|
#define CCR_READADDRESS 0x06100009
|
|
#define CCR_READADDRESS_MASK 0x003f0000 /* Location of cache just beyond current cache service */
|
|
#define CCR_LOOPINVALSIZE 0x0000fe00 /* Number of invalid samples in cache prior to loop */
|
|
/* NOTE: This is valid only if CACHELOOPFLAG is set */
|
|
#define CCR_LOOPFLAG 0x00000100 /* Set for a single sample period when a loop occurs */
|
|
#define CCR_CACHELOOPADDRHI 0x000000ff /* DSL_LOOPSTARTADDR's hi byte if CACHELOOPFLAG is set */
|
|
|
|
#define CLP 0x0a /* Cache loop register (valid if CCR_CACHELOOPFLAG = 1) */
|
|
/* NOTE: This register is normally not used */
|
|
#define CLP_CACHELOOPADDR 0x0000ffff /* Cache loop address (DSL_LOOPSTARTADDR [0..15]) */
|
|
|
|
#define FXRT 0x0b /* Effects send routing register */
|
|
/* NOTE: It is illegal to assign the same routing to */
|
|
/* two effects sends. */
|
|
#define FXRT_CHANNELA 0x000f0000 /* Effects send bus number for channel's effects send A */
|
|
#define FXRT_CHANNELB 0x00f00000 /* Effects send bus number for channel's effects send B */
|
|
#define FXRT_CHANNELC 0x0f000000 /* Effects send bus number for channel's effects send C */
|
|
#define FXRT_CHANNELD 0xf0000000 /* Effects send bus number for channel's effects send D */
|
|
|
|
#define MAPA 0x0c /* Cache map A */
|
|
|
|
#define MAPB 0x0d /* Cache map B */
|
|
|
|
#define MAP_PTE_MASK 0xffffe000 /* The 19 MSBs of the PTE indexed by the PTI */
|
|
#define MAP_PTI_MASK 0x00001fff /* The 13 bit index to one of the 8192 PTE dwords */
|
|
|
|
#define ENVVOL 0x10 /* Volume envelope register */
|
|
#define ENVVOL_MASK 0x0000ffff /* Current value of volume envelope state variable */
|
|
/* 0x8000-n == 666*n usec delay */
|
|
|
|
#define ATKHLDV 0x11 /* Volume envelope hold and attack register */
|
|
#define ATKHLDV_PHASE0 0x00008000 /* 0 = Begin attack phase */
|
|
#define ATKHLDV_HOLDTIME_MASK 0x00007f00 /* Envelope hold time (127-n == n*88.2msec) */
|
|
#define ATKHLDV_ATTACKTIME_MASK 0x0000007f /* Envelope attack time, log encoded */
|
|
/* 0 = infinite, 1 = 10.9msec, ... 0x7f = 5.5msec */
|
|
|
|
#define DCYSUSV 0x12 /* Volume envelope sustain and decay register */
|
|
#define DCYSUSV_PHASE1_MASK 0x00008000 /* 0 = Begin attack phase, 1 = begin release phase */
|
|
#define DCYSUSV_SUSTAINLEVEL_MASK 0x00007f00 /* 127 = full, 0 = off, 0.75dB increments */
|
|
#define DCYSUSV_CHANNELENABLE_MASK 0x00000080 /* 1 = Inhibit envelope engine from writing values in */
|
|
/* this channel and from writing to pitch, filter and */
|
|
/* volume targets. */
|
|
#define DCYSUSV_DECAYTIME_MASK 0x0000007f /* Volume envelope decay time, log encoded */
|
|
/* 0 = 43.7msec, 1 = 21.8msec, 0x7f = 22msec */
|
|
|
|
#define LFOVAL1 0x13 /* Modulation LFO value */
|
|
#define LFOVAL_MASK 0x0000ffff /* Current value of modulation LFO state variable */
|
|
/* 0x8000-n == 666*n usec delay */
|
|
|
|
#define ENVVAL 0x14 /* Modulation envelope register */
|
|
#define ENVVAL_MASK 0x0000ffff /* Current value of modulation envelope state variable */
|
|
/* 0x8000-n == 666*n usec delay */
|
|
|
|
#define ATKHLDM 0x15 /* Modulation envelope hold and attack register */
|
|
#define ATKHLDM_PHASE0 0x00008000 /* 0 = Begin attack phase */
|
|
#define ATKHLDM_HOLDTIME 0x00007f00 /* Envelope hold time (127-n == n*42msec) */
|
|
#define ATKHLDM_ATTACKTIME 0x0000007f /* Envelope attack time, log encoded */
|
|
/* 0 = infinite, 1 = 11msec, ... 0x7f = 5.5msec */
|
|
|
|
#define DCYSUSM 0x16 /* Modulation envelope decay and sustain register */
|
|
#define DCYSUSM_PHASE1_MASK 0x00008000 /* 0 = Begin attack phase, 1 = begin release phase */
|
|
#define DCYSUSM_SUSTAINLEVEL_MASK 0x00007f00 /* 127 = full, 0 = off, 0.75dB increments */
|
|
#define DCYSUSM_DECAYTIME_MASK 0x0000007f /* Envelope decay time, log encoded */
|
|
/* 0 = 43.7msec, 1 = 21.8msec, 0x7f = 22msec */
|
|
|
|
#define LFOVAL2 0x17 /* Vibrato LFO register */
|
|
#define LFOVAL2_MASK 0x0000ffff /* Current value of vibrato LFO state variable */
|
|
/* 0x8000-n == 666*n usec delay */
|
|
|
|
#define IP 0x18 /* Initial pitch register */
|
|
#define IP_MASK 0x0000ffff /* Exponential initial pitch shift */
|
|
/* 4 bits of octave, 12 bits of fractional octave */
|
|
#define IP_UNITY 0x0000e000 /* Unity pitch shift */
|
|
|
|
#define IFATN 0x19 /* Initial filter cutoff and attenuation register */
|
|
#define IFATN_FILTERCUTOFF_MASK 0x0000ff00 /* Initial filter cutoff frequency in exponential units */
|
|
/* 6 most significant bits are semitones */
|
|
/* 2 least significant bits are fractions */
|
|
#define IFATN_FILTERCUTOFF 0x08080019
|
|
#define IFATN_ATTENUATION_MASK 0x000000ff /* Initial attenuation in 0.375dB steps */
|
|
#define IFATN_ATTENUATION 0x08000019
|
|
|
|
|
|
#define PEFE 0x1a /* Pitch envelope and filter envelope amount register */
|
|
#define PEFE_PITCHAMOUNT_MASK 0x0000ff00 /* Pitch envlope amount */
|
|
/* Signed 2's complement, +/- one octave peak extremes */
|
|
#define PEFE_PITCHAMOUNT 0x0808001a
|
|
#define PEFE_FILTERAMOUNT_MASK 0x000000ff /* Filter envlope amount */
|
|
/* Signed 2's complement, +/- six octaves peak extremes */
|
|
#define PEFE_FILTERAMOUNT 0x0800001a
|
|
#define FMMOD 0x1b /* Vibrato/filter modulation from LFO register */
|
|
#define FMMOD_MODVIBRATO 0x0000ff00 /* Vibrato LFO modulation depth */
|
|
/* Signed 2's complement, +/- one octave extremes */
|
|
#define FMMOD_MOFILTER 0x000000ff /* Filter LFO modulation depth */
|
|
/* Signed 2's complement, +/- three octave extremes */
|
|
|
|
|
|
#define TREMFRQ 0x1c /* Tremolo amount and modulation LFO frequency register */
|
|
#define TREMFRQ_DEPTH 0x0000ff00 /* Tremolo depth */
|
|
/* Signed 2's complement, with +/- 12dB extremes */
|
|
|
|
#define TREMFRQ_FREQUENCY 0x000000ff /* Tremolo LFO frequency */
|
|
/* ??Hz steps, maximum of ?? Hz. */
|
|
#define FM2FRQ2 0x1d /* Vibrato amount and vibrato LFO frequency register */
|
|
#define FM2FRQ2_DEPTH 0x0000ff00 /* Vibrato LFO vibrato depth */
|
|
/* Signed 2's complement, +/- one octave extremes */
|
|
#define FM2FRQ2_FREQUENCY 0x000000ff /* Vibrato LFO frequency */
|
|
/* 0.039Hz steps, maximum of 9.85 Hz. */
|
|
|
|
#define TEMPENV 0x1e /* Tempory envelope register */
|
|
#define TEMPENV_MASK 0x0000ffff /* 16-bit value */
|
|
/* NOTE: All channels contain internal variables; do */
|
|
/* not write to these locations. */
|
|
|
|
/* 1f something */
|
|
|
|
#define CD0 0x20 /* Cache data 0 register */
|
|
#define CD1 0x21 /* Cache data 1 register */
|
|
#define CD2 0x22 /* Cache data 2 register */
|
|
#define CD3 0x23 /* Cache data 3 register */
|
|
#define CD4 0x24 /* Cache data 4 register */
|
|
#define CD5 0x25 /* Cache data 5 register */
|
|
#define CD6 0x26 /* Cache data 6 register */
|
|
#define CD7 0x27 /* Cache data 7 register */
|
|
#define CD8 0x28 /* Cache data 8 register */
|
|
#define CD9 0x29 /* Cache data 9 register */
|
|
#define CDA 0x2a /* Cache data A register */
|
|
#define CDB 0x2b /* Cache data B register */
|
|
#define CDC 0x2c /* Cache data C register */
|
|
#define CDD 0x2d /* Cache data D register */
|
|
#define CDE 0x2e /* Cache data E register */
|
|
#define CDF 0x2f /* Cache data F register */
|
|
|
|
/* 0x30-3f seem to be the same as 0x20-2f */
|
|
|
|
#define PTB 0x40 /* Page table base register */
|
|
#define PTB_MASK 0xfffff000 /* Physical address of the page table in host memory */
|
|
|
|
#define TCB 0x41 /* Tank cache base register */
|
|
#define TCB_MASK 0xfffff000 /* Physical address of the bottom of host based TRAM */
|
|
|
|
#define ADCCR 0x42 /* ADC sample rate/stereo control register */
|
|
#define ADCCR_RCHANENABLE 0x00000010 /* Enables right channel for writing to the host */
|
|
#define ADCCR_LCHANENABLE 0x00000008 /* Enables left channel for writing to the host */
|
|
/* NOTE: To guarantee phase coherency, both channels */
|
|
/* must be disabled prior to enabling both channels. */
|
|
#define A_ADCCR_RCHANENABLE 0x00000020
|
|
#define A_ADCCR_LCHANENABLE 0x00000010
|
|
|
|
#define A_ADCCR_SAMPLERATE_MASK 0x0000000F /* Audigy sample rate convertor output rate */
|
|
#define ADCCR_SAMPLERATE_MASK 0x00000007 /* Sample rate convertor output rate */
|
|
#define ADCCR_SAMPLERATE_48 0x00000000 /* 48kHz sample rate */
|
|
#define ADCCR_SAMPLERATE_44 0x00000001 /* 44.1kHz sample rate */
|
|
#define ADCCR_SAMPLERATE_32 0x00000002 /* 32kHz sample rate */
|
|
#define ADCCR_SAMPLERATE_24 0x00000003 /* 24kHz sample rate */
|
|
#define ADCCR_SAMPLERATE_22 0x00000004 /* 22.05kHz sample rate */
|
|
#define ADCCR_SAMPLERATE_16 0x00000005 /* 16kHz sample rate */
|
|
#define ADCCR_SAMPLERATE_11 0x00000006 /* 11.025kHz sample rate */
|
|
#define ADCCR_SAMPLERATE_8 0x00000007 /* 8kHz sample rate */
|
|
#define A_ADCCR_SAMPLERATE_12 0x00000006 /* 12kHz sample rate */
|
|
#define A_ADCCR_SAMPLERATE_11 0x00000007 /* 11.025kHz sample rate */
|
|
#define A_ADCCR_SAMPLERATE_8 0x00000008 /* 8kHz sample rate */
|
|
|
|
#define FXWC 0x43 /* FX output write channels register */
|
|
/* When set, each bit enables the writing of the */
|
|
/* corresponding FX output channel (internal registers */
|
|
/* 0x20-0x3f) to host memory. This mode of recording */
|
|
/* is 16bit, 48KHz only. All 32 channels can be enabled */
|
|
/* simultaneously. */
|
|
|
|
#define FXWC_DEFAULTROUTE_C (1<<0) /* left emu out? */
|
|
#define FXWC_DEFAULTROUTE_B (1<<1) /* right emu out? */
|
|
#define FXWC_DEFAULTROUTE_A (1<<12)
|
|
#define FXWC_DEFAULTROUTE_D (1<<13)
|
|
#define FXWC_ADCLEFT (1<<18)
|
|
#define FXWC_CDROMSPDIFLEFT (1<<18)
|
|
#define FXWC_ADCRIGHT (1<<19)
|
|
#define FXWC_CDROMSPDIFRIGHT (1<<19)
|
|
#define FXWC_MIC (1<<20)
|
|
#define FXWC_ZOOMLEFT (1<<20)
|
|
#define FXWC_ZOOMRIGHT (1<<21)
|
|
#define FXWC_SPDIFLEFT (1<<22) /* 0x00400000 */
|
|
#define FXWC_SPDIFRIGHT (1<<23) /* 0x00800000 */
|
|
|
|
#define TCBS 0x44 /* Tank cache buffer size register */
|
|
#define TCBS_MASK 0x00000007 /* Tank cache buffer size field */
|
|
#define TCBS_BUFFSIZE_16K 0x00000000
|
|
#define TCBS_BUFFSIZE_32K 0x00000001
|
|
#define TCBS_BUFFSIZE_64K 0x00000002
|
|
#define TCBS_BUFFSIZE_128K 0x00000003
|
|
#define TCBS_BUFFSIZE_256K 0x00000004
|
|
#define TCBS_BUFFSIZE_512K 0x00000005
|
|
#define TCBS_BUFFSIZE_1024K 0x00000006
|
|
#define TCBS_BUFFSIZE_2048K 0x00000007
|
|
|
|
#define MICBA 0x45 /* AC97 microphone buffer address register */
|
|
#define MICBA_MASK 0xfffff000 /* 20 bit base address */
|
|
|
|
#define ADCBA 0x46 /* ADC buffer address register */
|
|
#define ADCBA_MASK 0xfffff000 /* 20 bit base address */
|
|
|
|
#define FXBA 0x47 /* FX Buffer Address */
|
|
#define FXBA_MASK 0xfffff000 /* 20 bit base address */
|
|
|
|
/* 0x48 something - word access, defaults to 3f */
|
|
|
|
#define MICBS 0x49 /* Microphone buffer size register */
|
|
|
|
#define ADCBS 0x4a /* ADC buffer size register */
|
|
|
|
#define FXBS 0x4b /* FX buffer size register */
|
|
|
|
/* register: 0x4c..4f: ffff-ffff current amounts, per-channel */
|
|
|
|
/* The following mask values define the size of the ADC, MIX and FX buffers in bytes */
|
|
#define ADCBS_BUFSIZE_NONE 0x00000000
|
|
#define ADCBS_BUFSIZE_384 0x00000001
|
|
#define ADCBS_BUFSIZE_448 0x00000002
|
|
#define ADCBS_BUFSIZE_512 0x00000003
|
|
#define ADCBS_BUFSIZE_640 0x00000004
|
|
#define ADCBS_BUFSIZE_768 0x00000005
|
|
#define ADCBS_BUFSIZE_896 0x00000006
|
|
#define ADCBS_BUFSIZE_1024 0x00000007
|
|
#define ADCBS_BUFSIZE_1280 0x00000008
|
|
#define ADCBS_BUFSIZE_1536 0x00000009
|
|
#define ADCBS_BUFSIZE_1792 0x0000000a
|
|
#define ADCBS_BUFSIZE_2048 0x0000000b
|
|
#define ADCBS_BUFSIZE_2560 0x0000000c
|
|
#define ADCBS_BUFSIZE_3072 0x0000000d
|
|
#define ADCBS_BUFSIZE_3584 0x0000000e
|
|
#define ADCBS_BUFSIZE_4096 0x0000000f
|
|
#define ADCBS_BUFSIZE_5120 0x00000010
|
|
#define ADCBS_BUFSIZE_6144 0x00000011
|
|
#define ADCBS_BUFSIZE_7168 0x00000012
|
|
#define ADCBS_BUFSIZE_8192 0x00000013
|
|
#define ADCBS_BUFSIZE_10240 0x00000014
|
|
#define ADCBS_BUFSIZE_12288 0x00000015
|
|
#define ADCBS_BUFSIZE_14366 0x00000016
|
|
#define ADCBS_BUFSIZE_16384 0x00000017
|
|
#define ADCBS_BUFSIZE_20480 0x00000018
|
|
#define ADCBS_BUFSIZE_24576 0x00000019
|
|
#define ADCBS_BUFSIZE_28672 0x0000001a
|
|
#define ADCBS_BUFSIZE_32768 0x0000001b
|
|
#define ADCBS_BUFSIZE_40960 0x0000001c
|
|
#define ADCBS_BUFSIZE_49152 0x0000001d
|
|
#define ADCBS_BUFSIZE_57344 0x0000001e
|
|
#define ADCBS_BUFSIZE_65536 0x0000001f
|
|
|
|
|
|
#define CDCS 0x50 /* CD-ROM digital channel status register */
|
|
|
|
#define GPSCS 0x51 /* General Purpose SPDIF channel status register*/
|
|
|
|
#define DBG 0x52 /* DO NOT PROGRAM THIS REGISTER!!! MAY DESTROY CHIP */
|
|
|
|
#define REG53 0x53 /* DO NOT PROGRAM THIS REGISTER!!! MAY DESTROY CHIP */
|
|
|
|
#define A_DBG 0x53
|
|
#define A_DBG_SINGLE_STEP 0x00020000 /* Set to zero to start dsp */
|
|
#define A_DBG_ZC 0x40000000 /* zero tram counter */
|
|
#define A_DBG_STEP_ADDR 0x000003ff
|
|
#define A_DBG_SATURATION_OCCURED 0x20000000
|
|
#define A_DBG_SATURATION_ADDR 0x0ffc0000
|
|
|
|
// NOTE: 0x54,55,56: 64-bit
|
|
#define SPCS0 0x54 /* SPDIF output Channel Status 0 register */
|
|
|
|
#define SPCS1 0x55 /* SPDIF output Channel Status 1 register */
|
|
|
|
#define SPCS2 0x56 /* SPDIF output Channel Status 2 register */
|
|
|
|
#define SPCS_CLKACCYMASK 0x30000000 /* Clock accuracy */
|
|
#define SPCS_CLKACCY_1000PPM 0x00000000 /* 1000 parts per million */
|
|
#define SPCS_CLKACCY_50PPM 0x10000000 /* 50 parts per million */
|
|
#define SPCS_CLKACCY_VARIABLE 0x20000000 /* Variable accuracy */
|
|
#define SPCS_SAMPLERATEMASK 0x0f000000 /* Sample rate */
|
|
#define SPCS_SAMPLERATE_44 0x00000000 /* 44.1kHz sample rate */
|
|
#define SPCS_SAMPLERATE_48 0x02000000 /* 48kHz sample rate */
|
|
#define SPCS_SAMPLERATE_32 0x03000000 /* 32kHz sample rate */
|
|
#define SPCS_CHANNELNUMMASK 0x00f00000 /* Channel number */
|
|
#define SPCS_CHANNELNUM_UNSPEC 0x00000000 /* Unspecified channel number */
|
|
#define SPCS_CHANNELNUM_LEFT 0x00100000 /* Left channel */
|
|
#define SPCS_CHANNELNUM_RIGHT 0x00200000 /* Right channel */
|
|
#define SPCS_SOURCENUMMASK 0x000f0000 /* Source number */
|
|
#define SPCS_SOURCENUM_UNSPEC 0x00000000 /* Unspecified source number */
|
|
#define SPCS_GENERATIONSTATUS 0x00008000 /* Originality flag (see IEC-958 spec) */
|
|
#define SPCS_CATEGORYCODEMASK 0x00007f00 /* Category code (see IEC-958 spec) */
|
|
#define SPCS_MODEMASK 0x000000c0 /* Mode (see IEC-958 spec) */
|
|
#define SPCS_EMPHASISMASK 0x00000038 /* Emphasis */
|
|
#define SPCS_EMPHASIS_NONE 0x00000000 /* No emphasis */
|
|
#define SPCS_EMPHASIS_50_15 0x00000008 /* 50/15 usec 2 channel */
|
|
#define SPCS_COPYRIGHT 0x00000004 /* Copyright asserted flag -- do not modify */
|
|
#define SPCS_NOTAUDIODATA 0x00000002 /* 0 = Digital audio, 1 = not audio */
|
|
#define SPCS_PROFESSIONAL 0x00000001 /* 0 = Consumer (IEC-958), 1 = pro (AES3-1992) */
|
|
|
|
/* The 32-bit CLIx and SOLx registers all have one bit per channel control/status */
|
|
#define CLIEL 0x58 /* Channel loop interrupt enable low register */
|
|
|
|
#define CLIEH 0x59 /* Channel loop interrupt enable high register */
|
|
|
|
#define CLIPL 0x5a /* Channel loop interrupt pending low register */
|
|
|
|
#define CLIPH 0x5b /* Channel loop interrupt pending high register */
|
|
|
|
#define SOLEL 0x5c /* Stop on loop enable low register */
|
|
|
|
#define SOLEH 0x5d /* Stop on loop enable high register */
|
|
|
|
#define SPBYPASS 0x5e /* SPDIF BYPASS mode register */
|
|
#define SPBYPASS_SPDIF0_MASK 0x00000003 /* SPDIF 0 bypass mode */
|
|
#define SPBYPASS_SPDIF1_MASK 0x0000000c /* SPDIF 1 bypass mode */
|
|
/* bypass mode: 0 - DSP; 1 - SPDIF A, 2 - SPDIF B, 3 - SPDIF C */
|
|
#define SPBYPASS_FORMAT 0x00000f00 /* If 1, SPDIF XX uses 24 bit, if 0 - 20 bit */
|
|
|
|
#define AC97SLOT 0x5f /* additional AC97 slots enable bits */
|
|
#define AC97SLOT_REAR_RIGHT 0x01 /* Rear left */
|
|
#define AC97SLOT_REAR_LEFT 0x02 /* Rear right */
|
|
#define AC97SLOT_CNTR 0x10 /* Center enable */
|
|
#define AC97SLOT_LFE 0x20 /* LFE enable */
|
|
|
|
// NOTE: 0x60,61,62: 64-bit
|
|
#define CDSRCS 0x60 /* CD-ROM Sample Rate Converter status register */
|
|
|
|
#define GPSRCS 0x61 /* General Purpose SPDIF sample rate cvt status */
|
|
|
|
#define ZVSRCS 0x62 /* ZVideo sample rate converter status */
|
|
/* NOTE: This one has no SPDIFLOCKED field */
|
|
/* Assumes sample lock */
|
|
|
|
/* These three bitfields apply to CDSRCS, GPSRCS, and (except as noted) ZVSRCS. */
|
|
#define SRCS_SPDIFVALID 0x04000000 /* SPDIF stream valid */
|
|
#define SRCS_SPDIFLOCKED 0x02000000 /* SPDIF stream locked */
|
|
#define SRCS_RATELOCKED 0x01000000 /* Sample rate locked */
|
|
#define SRCS_ESTSAMPLERATE 0x0007ffff /* Do not modify this field. */
|
|
|
|
/* Note that these values can vary +/- by a small amount */
|
|
#define SRCS_SPDIFRATE_44 0x0003acd9
|
|
#define SRCS_SPDIFRATE_48 0x00040000
|
|
#define SRCS_SPDIFRATE_96 0x00080000
|
|
|
|
#define MICIDX 0x63 /* Microphone recording buffer index register */
|
|
#define MICIDX_MASK 0x0000ffff /* 16-bit value */
|
|
#define MICIDX_IDX 0x10000063
|
|
|
|
#define ADCIDX 0x64 /* ADC recording buffer index register */
|
|
#define ADCIDX_MASK 0x0000ffff /* 16 bit index field */
|
|
#define ADCIDX_IDX 0x10000064
|
|
|
|
#define A_ADCIDX 0x63
|
|
#define A_ADCIDX_IDX 0x10000063
|
|
|
|
#define A_MICIDX 0x64
|
|
#define A_MICIDX_IDX 0x10000064
|
|
|
|
#define FXIDX 0x65 /* FX recording buffer index register */
|
|
#define FXIDX_MASK 0x0000ffff /* 16-bit value */
|
|
#define FXIDX_IDX 0x10000065
|
|
|
|
/* The 32-bit HLIx and HLIPx registers all have one bit per channel control/status */
|
|
#define HLIEL 0x66 /* Channel half loop interrupt enable low register */
|
|
|
|
#define HLIEH 0x67 /* Channel half loop interrupt enable high register */
|
|
|
|
#define HLIPL 0x68 /* Channel half loop interrupt pending low register */
|
|
|
|
#define HLIPH 0x69 /* Channel half loop interrupt pending high register */
|
|
|
|
// 0x6a,6b,6c used for some recording
|
|
// 0x6d unused
|
|
// 0x6e,6f - tanktable base / offset
|
|
|
|
/* This is the MPU port on the card (via the game port) */
|
|
#define A_MUDATA1 0x70
|
|
#define A_MUCMD1 0x71
|
|
#define A_MUSTAT1 A_MUCMD1
|
|
|
|
/* This is the MPU port on the Audigy Drive */
|
|
#define A_MUDATA2 0x72
|
|
#define A_MUCMD2 0x73
|
|
#define A_MUSTAT2 A_MUCMD2
|
|
|
|
/* The next two are the Audigy equivalent of FXWC */
|
|
/* the Audigy can record any output (16bit, 48kHz, up to 64 channel simultaneously) */
|
|
/* Each bit selects a channel for recording */
|
|
#define A_FXWC1 0x74 /* Selects 0x7f-0x60 for FX recording */
|
|
#define A_FXWC2 0x75 /* Selects 0x9f-0x80 for FX recording */
|
|
|
|
#define A_SPDIF_SAMPLERATE 0x76 /* Set the sample rate of SPDIF output */
|
|
#define A_SAMPLE_RATE 0x76 /* Various sample rate settings. */
|
|
#define A_SAMPLE_RATE_NOT_USED 0x0ffc111e /* Bits that are not used and cannot be set. */
|
|
#define A_SAMPLE_RATE_UNKNOWN 0xf0030001 /* Bits that can be set, but have unknown use. */
|
|
#define A_SPDIF_RATE_MASK 0x000000e0 /* Any other values for rates, just use 48000 */
|
|
#define A_SPDIF_48000 0x00000000
|
|
#define A_SPDIF_192000 0x00000020
|
|
#define A_SPDIF_96000 0x00000040
|
|
#define A_SPDIF_44100 0x00000080
|
|
|
|
#define A_I2S_CAPTURE_RATE_MASK 0x00000e00 /* This sets the capture PCM rate, but it is */
|
|
#define A_I2S_CAPTURE_48000 0x00000000 /* unclear if this sets the ADC rate as well. */
|
|
#define A_I2S_CAPTURE_192000 0x00000200
|
|
#define A_I2S_CAPTURE_96000 0x00000400
|
|
#define A_I2S_CAPTURE_44100 0x00000800
|
|
|
|
#define A_PCM_RATE_MASK 0x0000e000 /* This sets the playback PCM rate on the P16V */
|
|
#define A_PCM_48000 0x00000000
|
|
#define A_PCM_192000 0x00002000
|
|
#define A_PCM_96000 0x00004000
|
|
#define A_PCM_44100 0x00008000
|
|
|
|
/* 0x77,0x78,0x79 "something i2s-related" - default to 0x01080000 on my audigy 2 ZS --rlrevell */
|
|
/* 0x7a, 0x7b - lookup tables */
|
|
|
|
#define A_FXRT2 0x7c
|
|
#define A_FXRT_CHANNELE 0x0000003f /* Effects send bus number for channel's effects send E */
|
|
#define A_FXRT_CHANNELF 0x00003f00 /* Effects send bus number for channel's effects send F */
|
|
#define A_FXRT_CHANNELG 0x003f0000 /* Effects send bus number for channel's effects send G */
|
|
#define A_FXRT_CHANNELH 0x3f000000 /* Effects send bus number for channel's effects send H */
|
|
|
|
#define A_SENDAMOUNTS 0x7d
|
|
#define A_FXSENDAMOUNT_E_MASK 0xFF000000
|
|
#define A_FXSENDAMOUNT_F_MASK 0x00FF0000
|
|
#define A_FXSENDAMOUNT_G_MASK 0x0000FF00
|
|
#define A_FXSENDAMOUNT_H_MASK 0x000000FF
|
|
/* 0x7c, 0x7e "high bit is used for filtering" */
|
|
|
|
/* The send amounts for this one are the same as used with the emu10k1 */
|
|
#define A_FXRT1 0x7e
|
|
#define A_FXRT_CHANNELA 0x0000003f
|
|
#define A_FXRT_CHANNELB 0x00003f00
|
|
#define A_FXRT_CHANNELC 0x003f0000
|
|
#define A_FXRT_CHANNELD 0x3f000000
|
|
|
|
|
|
/* Each FX general purpose register is 32 bits in length, all bits are used */
|
|
#define FXGPREGBASE 0x100 /* FX general purpose registers base */
|
|
#define A_FXGPREGBASE 0x400 /* Audigy GPRs, 0x400 to 0x5ff */
|
|
|
|
#define A_TANKMEMCTLREGBASE 0x100 /* Tank memory control registers base - only for Audigy */
|
|
#define A_TANKMEMCTLREG_MASK 0x1f /* only 5 bits used - only for Audigy */
|
|
|
|
/* Tank audio data is logarithmically compressed down to 16 bits before writing to TRAM and is */
|
|
/* decompressed back to 20 bits on a read. There are a total of 160 locations, the last 32 */
|
|
/* locations are for external TRAM. */
|
|
#define TANKMEMDATAREGBASE 0x200 /* Tank memory data registers base */
|
|
#define TANKMEMDATAREG_MASK 0x000fffff /* 20 bit tank audio data field */
|
|
|
|
/* Combined address field and memory opcode or flag field. 160 locations, last 32 are external */
|
|
#define TANKMEMADDRREGBASE 0x300 /* Tank memory address registers base */
|
|
#define TANKMEMADDRREG_ADDR_MASK 0x000fffff /* 20 bit tank address field */
|
|
#define TANKMEMADDRREG_CLEAR 0x00800000 /* Clear tank memory */
|
|
#define TANKMEMADDRREG_ALIGN 0x00400000 /* Align read or write relative to tank access */
|
|
#define TANKMEMADDRREG_WRITE 0x00200000 /* Write to tank memory */
|
|
#define TANKMEMADDRREG_READ 0x00100000 /* Read from tank memory */
|
|
|
|
#define MICROCODEBASE 0x400 /* Microcode data base address */
|
|
|
|
/* Each DSP microcode instruction is mapped into 2 doublewords */
|
|
/* NOTE: When writing, always write the LO doubleword first. Reads can be in either order. */
|
|
#define LOWORD_OPX_MASK 0x000ffc00 /* Instruction operand X */
|
|
#define LOWORD_OPY_MASK 0x000003ff /* Instruction operand Y */
|
|
#define HIWORD_OPCODE_MASK 0x00f00000 /* Instruction opcode */
|
|
#define HIWORD_RESULT_MASK 0x000ffc00 /* Instruction result */
|
|
#define HIWORD_OPA_MASK 0x000003ff /* Instruction operand A */
|
|
|
|
|
|
/* Audigy Soundcard have a different instruction format */
|
|
#define A_MICROCODEBASE 0x600
|
|
#define A_LOWORD_OPY_MASK 0x000007ff
|
|
#define A_LOWORD_OPX_MASK 0x007ff000
|
|
#define A_HIWORD_OPCODE_MASK 0x0f000000
|
|
#define A_HIWORD_RESULT_MASK 0x007ff000
|
|
#define A_HIWORD_OPA_MASK 0x000007ff
|
|
|
|
|
|
/* ------------------- STRUCTURES -------------------- */
|
|
|
|
enum {
|
|
EMU10K1_EFX,
|
|
EMU10K1_PCM,
|
|
EMU10K1_SYNTH,
|
|
EMU10K1_MIDI
|
|
};
|
|
|
|
struct snd_emu10k1;
|
|
|
|
struct snd_emu10k1_voice {
|
|
struct snd_emu10k1 *emu;
|
|
int number;
|
|
unsigned int use: 1,
|
|
pcm: 1,
|
|
efx: 1,
|
|
synth: 1,
|
|
midi: 1;
|
|
void (*interrupt)(struct snd_emu10k1 *emu, struct snd_emu10k1_voice *pvoice);
|
|
|
|
struct snd_emu10k1_pcm *epcm;
|
|
};
|
|
|
|
enum {
|
|
PLAYBACK_EMUVOICE,
|
|
PLAYBACK_EFX,
|
|
CAPTURE_AC97ADC,
|
|
CAPTURE_AC97MIC,
|
|
CAPTURE_EFX
|
|
};
|
|
|
|
struct snd_emu10k1_pcm {
|
|
struct snd_emu10k1 *emu;
|
|
int type;
|
|
struct snd_pcm_substream *substream;
|
|
struct snd_emu10k1_voice *voices[NUM_EFX_PLAYBACK];
|
|
struct snd_emu10k1_voice *extra;
|
|
unsigned short running;
|
|
unsigned short first_ptr;
|
|
struct snd_util_memblk *memblk;
|
|
unsigned int start_addr;
|
|
unsigned int ccca_start_addr;
|
|
unsigned int capture_ipr; /* interrupt acknowledge mask */
|
|
unsigned int capture_inte; /* interrupt enable mask */
|
|
unsigned int capture_ba_reg; /* buffer address register */
|
|
unsigned int capture_bs_reg; /* buffer size register */
|
|
unsigned int capture_idx_reg; /* buffer index register */
|
|
unsigned int capture_cr_val; /* control value */
|
|
unsigned int capture_cr_val2; /* control value2 (for audigy) */
|
|
unsigned int capture_bs_val; /* buffer size value */
|
|
unsigned int capture_bufsize; /* buffer size in bytes */
|
|
};
|
|
|
|
struct snd_emu10k1_pcm_mixer {
|
|
/* mono, left, right x 8 sends (4 on emu10k1) */
|
|
unsigned char send_routing[3][8];
|
|
unsigned char send_volume[3][8];
|
|
unsigned short attn[3];
|
|
struct snd_emu10k1_pcm *epcm;
|
|
};
|
|
|
|
#define snd_emu10k1_compose_send_routing(route) \
|
|
((route[0] | (route[1] << 4) | (route[2] << 8) | (route[3] << 12)) << 16)
|
|
|
|
#define snd_emu10k1_compose_audigy_fxrt1(route) \
|
|
((unsigned int)route[0] | ((unsigned int)route[1] << 8) | ((unsigned int)route[2] << 16) | ((unsigned int)route[3] << 24))
|
|
|
|
#define snd_emu10k1_compose_audigy_fxrt2(route) \
|
|
((unsigned int)route[4] | ((unsigned int)route[5] << 8) | ((unsigned int)route[6] << 16) | ((unsigned int)route[7] << 24))
|
|
|
|
struct snd_emu10k1_memblk {
|
|
struct snd_util_memblk mem;
|
|
/* private part */
|
|
int first_page, last_page, pages, mapped_page;
|
|
unsigned int map_locked;
|
|
struct list_head mapped_link;
|
|
struct list_head mapped_order_link;
|
|
};
|
|
|
|
#define snd_emu10k1_memblk_offset(blk) (((blk)->mapped_page << PAGE_SHIFT) | ((blk)->mem.offset & (PAGE_SIZE - 1)))
|
|
|
|
#define EMU10K1_MAX_TRAM_BLOCKS_PER_CODE 16
|
|
|
|
struct snd_emu10k1_fx8010_ctl {
|
|
struct list_head list; /* list link container */
|
|
unsigned int vcount;
|
|
unsigned int count; /* count of GPR (1..16) */
|
|
unsigned short gpr[32]; /* GPR number(s) */
|
|
unsigned int value[32];
|
|
unsigned int min; /* minimum range */
|
|
unsigned int max; /* maximum range */
|
|
unsigned int translation; /* translation type (EMU10K1_GPR_TRANSLATION*) */
|
|
struct snd_kcontrol *kcontrol;
|
|
};
|
|
|
|
typedef void (snd_fx8010_irq_handler_t)(struct snd_emu10k1 *emu, void *private_data);
|
|
|
|
struct snd_emu10k1_fx8010_irq {
|
|
struct snd_emu10k1_fx8010_irq *next;
|
|
snd_fx8010_irq_handler_t *handler;
|
|
unsigned short gpr_running;
|
|
void *private_data;
|
|
};
|
|
|
|
struct snd_emu10k1_fx8010_pcm {
|
|
unsigned int valid: 1,
|
|
opened: 1,
|
|
active: 1;
|
|
unsigned int channels; /* 16-bit channels count */
|
|
unsigned int tram_start; /* initial ring buffer position in TRAM (in samples) */
|
|
unsigned int buffer_size; /* count of buffered samples */
|
|
unsigned short gpr_size; /* GPR containing size of ring buffer in samples (host) */
|
|
unsigned short gpr_ptr; /* GPR containing current pointer in the ring buffer (host = reset, FX8010) */
|
|
unsigned short gpr_count; /* GPR containing count of samples between two interrupts (host) */
|
|
unsigned short gpr_tmpcount; /* GPR containing current count of samples to interrupt (host = set, FX8010) */
|
|
unsigned short gpr_trigger; /* GPR containing trigger (activate) information (host) */
|
|
unsigned short gpr_running; /* GPR containing info if PCM is running (FX8010) */
|
|
unsigned char etram[32]; /* external TRAM address & data */
|
|
struct snd_pcm_indirect pcm_rec;
|
|
unsigned int tram_pos;
|
|
unsigned int tram_shift;
|
|
struct snd_emu10k1_fx8010_irq *irq;
|
|
};
|
|
|
|
struct snd_emu10k1_fx8010 {
|
|
unsigned short fxbus_mask; /* used FX buses (bitmask) */
|
|
unsigned short extin_mask; /* used external inputs (bitmask) */
|
|
unsigned short extout_mask; /* used external outputs (bitmask) */
|
|
unsigned short pad1;
|
|
unsigned int itram_size; /* internal TRAM size in samples */
|
|
struct snd_dma_buffer etram_pages; /* external TRAM pages and size */
|
|
unsigned int dbg; /* FX debugger register */
|
|
unsigned char name[128];
|
|
int gpr_size; /* size of allocated GPR controls */
|
|
int gpr_count; /* count of used kcontrols */
|
|
struct list_head gpr_ctl; /* GPR controls */
|
|
struct mutex lock;
|
|
struct snd_emu10k1_fx8010_pcm pcm[8];
|
|
spinlock_t irq_lock;
|
|
struct snd_emu10k1_fx8010_irq *irq_handlers;
|
|
};
|
|
|
|
#define emu10k1_gpr_ctl(n) list_entry(n, struct snd_emu10k1_fx8010_ctl, list)
|
|
|
|
struct snd_emu10k1_midi {
|
|
struct snd_emu10k1 *emu;
|
|
struct snd_rawmidi *rmidi;
|
|
struct snd_rawmidi_substream *substream_input;
|
|
struct snd_rawmidi_substream *substream_output;
|
|
unsigned int midi_mode;
|
|
spinlock_t input_lock;
|
|
spinlock_t output_lock;
|
|
spinlock_t open_lock;
|
|
int tx_enable, rx_enable;
|
|
int port;
|
|
int ipr_tx, ipr_rx;
|
|
void (*interrupt)(struct snd_emu10k1 *emu, unsigned int status);
|
|
};
|
|
|
|
struct snd_emu_chip_details {
|
|
u32 vendor;
|
|
u32 device;
|
|
u32 subsystem;
|
|
unsigned char revision;
|
|
unsigned char emu10k1_chip; /* Original SB Live. Not SB Live 24bit. */
|
|
unsigned char emu10k2_chip; /* Audigy 1 or Audigy 2. */
|
|
unsigned char ca0102_chip; /* Audigy 1 or Audigy 2. Not SB Audigy 2 Value. */
|
|
unsigned char ca0108_chip; /* Audigy 2 Value */
|
|
unsigned char ca_cardbus_chip; /* Audigy 2 ZS Notebook */
|
|
unsigned char ca0151_chip; /* P16V */
|
|
unsigned char spk71; /* Has 7.1 speakers */
|
|
unsigned char sblive51; /* SBLive! 5.1 - extout 0x11 -> center, 0x12 -> lfe */
|
|
unsigned char spdif_bug; /* Has Spdif phasing bug */
|
|
unsigned char ac97_chip; /* Has an AC97 chip: 1 = mandatory, 2 = optional */
|
|
unsigned char ecard; /* APS EEPROM */
|
|
unsigned char emu1212m; /* EMU 1212m card */
|
|
unsigned char spi_dac; /* SPI interface for DAC */
|
|
unsigned char i2c_adc; /* I2C interface for ADC */
|
|
unsigned char adc_1361t; /* Use Philips 1361T ADC */
|
|
const char *driver;
|
|
const char *name;
|
|
const char *id; /* for backward compatibility - can be NULL if not needed */
|
|
};
|
|
|
|
struct snd_emu10k1 {
|
|
int irq;
|
|
|
|
unsigned long port; /* I/O port number */
|
|
unsigned int tos_link: 1, /* tos link detected */
|
|
rear_ac97: 1, /* rear channels are on AC'97 */
|
|
enable_ir: 1;
|
|
/* Contains profile of card capabilities */
|
|
const struct snd_emu_chip_details *card_capabilities;
|
|
unsigned int audigy; /* is Audigy? */
|
|
unsigned int revision; /* chip revision */
|
|
unsigned int serial; /* serial number */
|
|
unsigned short model; /* subsystem id */
|
|
unsigned int card_type; /* EMU10K1_CARD_* */
|
|
unsigned int ecard_ctrl; /* ecard control bits */
|
|
unsigned long dma_mask; /* PCI DMA mask */
|
|
int max_cache_pages; /* max memory size / PAGE_SIZE */
|
|
struct snd_dma_buffer silent_page; /* silent page */
|
|
struct snd_dma_buffer ptb_pages; /* page table pages */
|
|
struct snd_dma_device p16v_dma_dev;
|
|
struct snd_dma_buffer p16v_buffer;
|
|
|
|
struct snd_util_memhdr *memhdr; /* page allocation list */
|
|
struct snd_emu10k1_memblk *reserved_page; /* reserved page */
|
|
|
|
struct list_head mapped_link_head;
|
|
struct list_head mapped_order_link_head;
|
|
void **page_ptr_table;
|
|
unsigned long *page_addr_table;
|
|
spinlock_t memblk_lock;
|
|
|
|
unsigned int spdif_bits[3]; /* s/pdif out setup */
|
|
|
|
struct snd_emu10k1_fx8010 fx8010; /* FX8010 info */
|
|
int gpr_base;
|
|
|
|
struct snd_ac97 *ac97;
|
|
|
|
struct pci_dev *pci;
|
|
struct snd_card *card;
|
|
struct snd_pcm *pcm;
|
|
struct snd_pcm *pcm_mic;
|
|
struct snd_pcm *pcm_efx;
|
|
struct snd_pcm *pcm_multi;
|
|
struct snd_pcm *pcm_p16v;
|
|
|
|
spinlock_t synth_lock;
|
|
void *synth;
|
|
int (*get_synth_voice)(struct snd_emu10k1 *emu);
|
|
|
|
spinlock_t reg_lock;
|
|
spinlock_t emu_lock;
|
|
spinlock_t voice_lock;
|
|
|
|
struct snd_emu10k1_voice voices[NUM_G];
|
|
struct snd_emu10k1_voice p16v_voices[4];
|
|
struct snd_emu10k1_voice p16v_capture_voice;
|
|
int p16v_device_offset;
|
|
u32 p16v_capture_source;
|
|
u32 p16v_capture_channel;
|
|
struct snd_emu10k1_pcm_mixer pcm_mixer[32];
|
|
struct snd_emu10k1_pcm_mixer efx_pcm_mixer[NUM_EFX_PLAYBACK];
|
|
struct snd_kcontrol *ctl_send_routing;
|
|
struct snd_kcontrol *ctl_send_volume;
|
|
struct snd_kcontrol *ctl_attn;
|
|
struct snd_kcontrol *ctl_efx_send_routing;
|
|
struct snd_kcontrol *ctl_efx_send_volume;
|
|
struct snd_kcontrol *ctl_efx_attn;
|
|
|
|
void (*hwvol_interrupt)(struct snd_emu10k1 *emu, unsigned int status);
|
|
void (*capture_interrupt)(struct snd_emu10k1 *emu, unsigned int status);
|
|
void (*capture_mic_interrupt)(struct snd_emu10k1 *emu, unsigned int status);
|
|
void (*capture_efx_interrupt)(struct snd_emu10k1 *emu, unsigned int status);
|
|
void (*spdif_interrupt)(struct snd_emu10k1 *emu, unsigned int status);
|
|
void (*dsp_interrupt)(struct snd_emu10k1 *emu);
|
|
|
|
struct snd_pcm_substream *pcm_capture_substream;
|
|
struct snd_pcm_substream *pcm_capture_mic_substream;
|
|
struct snd_pcm_substream *pcm_capture_efx_substream;
|
|
struct snd_pcm_substream *pcm_playback_efx_substream;
|
|
|
|
struct snd_timer *timer;
|
|
|
|
struct snd_emu10k1_midi midi;
|
|
struct snd_emu10k1_midi midi2; /* for audigy */
|
|
|
|
unsigned int efx_voices_mask[2];
|
|
unsigned int next_free_voice;
|
|
|
|
#ifdef CONFIG_PM
|
|
unsigned int *saved_ptr;
|
|
unsigned int *saved_gpr;
|
|
unsigned int *tram_val_saved;
|
|
unsigned int *tram_addr_saved;
|
|
unsigned int *saved_icode;
|
|
unsigned int *p16v_saved;
|
|
unsigned int saved_a_iocfg, saved_hcfg;
|
|
#endif
|
|
|
|
};
|
|
|
|
int snd_emu10k1_create(struct snd_card *card,
|
|
struct pci_dev *pci,
|
|
unsigned short extin_mask,
|
|
unsigned short extout_mask,
|
|
long max_cache_bytes,
|
|
int enable_ir,
|
|
uint subsystem,
|
|
struct snd_emu10k1 ** remu);
|
|
|
|
int snd_emu10k1_pcm(struct snd_emu10k1 * emu, int device, struct snd_pcm ** rpcm);
|
|
int snd_emu10k1_pcm_mic(struct snd_emu10k1 * emu, int device, struct snd_pcm ** rpcm);
|
|
int snd_emu10k1_pcm_efx(struct snd_emu10k1 * emu, int device, struct snd_pcm ** rpcm);
|
|
int snd_p16v_pcm(struct snd_emu10k1 * emu, int device, struct snd_pcm ** rpcm);
|
|
int snd_p16v_free(struct snd_emu10k1 * emu);
|
|
int snd_p16v_mixer(struct snd_emu10k1 * emu);
|
|
int snd_emu10k1_pcm_multi(struct snd_emu10k1 * emu, int device, struct snd_pcm ** rpcm);
|
|
int snd_emu10k1_fx8010_pcm(struct snd_emu10k1 * emu, int device, struct snd_pcm ** rpcm);
|
|
int snd_emu10k1_mixer(struct snd_emu10k1 * emu, int pcm_device, int multi_device);
|
|
int snd_emu10k1_timer(struct snd_emu10k1 * emu, int device);
|
|
int snd_emu10k1_fx8010_new(struct snd_emu10k1 *emu, int device, struct snd_hwdep ** rhwdep);
|
|
|
|
irqreturn_t snd_emu10k1_interrupt(int irq, void *dev_id);
|
|
|
|
void snd_emu10k1_voice_init(struct snd_emu10k1 * emu, int voice);
|
|
int snd_emu10k1_init_efx(struct snd_emu10k1 *emu);
|
|
void snd_emu10k1_free_efx(struct snd_emu10k1 *emu);
|
|
int snd_emu10k1_fx8010_tram_setup(struct snd_emu10k1 *emu, u32 size);
|
|
int snd_emu10k1_done(struct snd_emu10k1 * emu);
|
|
|
|
/* I/O functions */
|
|
unsigned int snd_emu10k1_ptr_read(struct snd_emu10k1 * emu, unsigned int reg, unsigned int chn);
|
|
void snd_emu10k1_ptr_write(struct snd_emu10k1 *emu, unsigned int reg, unsigned int chn, unsigned int data);
|
|
unsigned int snd_emu10k1_ptr20_read(struct snd_emu10k1 * emu, unsigned int reg, unsigned int chn);
|
|
void snd_emu10k1_ptr20_write(struct snd_emu10k1 *emu, unsigned int reg, unsigned int chn, unsigned int data);
|
|
int snd_emu10k1_spi_write(struct snd_emu10k1 * emu, unsigned int data);
|
|
unsigned int snd_emu10k1_efx_read(struct snd_emu10k1 *emu, unsigned int pc);
|
|
void snd_emu10k1_intr_enable(struct snd_emu10k1 *emu, unsigned int intrenb);
|
|
void snd_emu10k1_intr_disable(struct snd_emu10k1 *emu, unsigned int intrenb);
|
|
void snd_emu10k1_voice_intr_enable(struct snd_emu10k1 *emu, unsigned int voicenum);
|
|
void snd_emu10k1_voice_intr_disable(struct snd_emu10k1 *emu, unsigned int voicenum);
|
|
void snd_emu10k1_voice_intr_ack(struct snd_emu10k1 *emu, unsigned int voicenum);
|
|
void snd_emu10k1_voice_half_loop_intr_enable(struct snd_emu10k1 *emu, unsigned int voicenum);
|
|
void snd_emu10k1_voice_half_loop_intr_disable(struct snd_emu10k1 *emu, unsigned int voicenum);
|
|
void snd_emu10k1_voice_half_loop_intr_ack(struct snd_emu10k1 *emu, unsigned int voicenum);
|
|
void snd_emu10k1_voice_set_loop_stop(struct snd_emu10k1 *emu, unsigned int voicenum);
|
|
void snd_emu10k1_voice_clear_loop_stop(struct snd_emu10k1 *emu, unsigned int voicenum);
|
|
void snd_emu10k1_wait(struct snd_emu10k1 *emu, unsigned int wait);
|
|
static inline unsigned int snd_emu10k1_wc(struct snd_emu10k1 *emu) { return (inl(emu->port + WC) >> 6) & 0xfffff; }
|
|
unsigned short snd_emu10k1_ac97_read(struct snd_ac97 *ac97, unsigned short reg);
|
|
void snd_emu10k1_ac97_write(struct snd_ac97 *ac97, unsigned short reg, unsigned short data);
|
|
unsigned int snd_emu10k1_rate_to_pitch(unsigned int rate);
|
|
|
|
#ifdef CONFIG_PM
|
|
void snd_emu10k1_suspend_regs(struct snd_emu10k1 *emu);
|
|
void snd_emu10k1_resume_init(struct snd_emu10k1 *emu);
|
|
void snd_emu10k1_resume_regs(struct snd_emu10k1 *emu);
|
|
int snd_emu10k1_efx_alloc_pm_buffer(struct snd_emu10k1 *emu);
|
|
void snd_emu10k1_efx_free_pm_buffer(struct snd_emu10k1 *emu);
|
|
void snd_emu10k1_efx_suspend(struct snd_emu10k1 *emu);
|
|
void snd_emu10k1_efx_resume(struct snd_emu10k1 *emu);
|
|
int snd_p16v_alloc_pm_buffer(struct snd_emu10k1 *emu);
|
|
void snd_p16v_free_pm_buffer(struct snd_emu10k1 *emu);
|
|
void snd_p16v_suspend(struct snd_emu10k1 *emu);
|
|
void snd_p16v_resume(struct snd_emu10k1 *emu);
|
|
#endif
|
|
|
|
/* memory allocation */
|
|
struct snd_util_memblk *snd_emu10k1_alloc_pages(struct snd_emu10k1 *emu, struct snd_pcm_substream *substream);
|
|
int snd_emu10k1_free_pages(struct snd_emu10k1 *emu, struct snd_util_memblk *blk);
|
|
struct snd_util_memblk *snd_emu10k1_synth_alloc(struct snd_emu10k1 *emu, unsigned int size);
|
|
int snd_emu10k1_synth_free(struct snd_emu10k1 *emu, struct snd_util_memblk *blk);
|
|
int snd_emu10k1_synth_bzero(struct snd_emu10k1 *emu, struct snd_util_memblk *blk, int offset, int size);
|
|
int snd_emu10k1_synth_copy_from_user(struct snd_emu10k1 *emu, struct snd_util_memblk *blk, int offset, const char __user *data, int size);
|
|
int snd_emu10k1_memblk_map(struct snd_emu10k1 *emu, struct snd_emu10k1_memblk *blk);
|
|
|
|
/* voice allocation */
|
|
int snd_emu10k1_voice_alloc(struct snd_emu10k1 *emu, int type, int pair, struct snd_emu10k1_voice **rvoice);
|
|
int snd_emu10k1_voice_free(struct snd_emu10k1 *emu, struct snd_emu10k1_voice *pvoice);
|
|
|
|
/* MIDI uart */
|
|
int snd_emu10k1_midi(struct snd_emu10k1 * emu);
|
|
int snd_emu10k1_audigy_midi(struct snd_emu10k1 * emu);
|
|
|
|
/* proc interface */
|
|
int snd_emu10k1_proc_init(struct snd_emu10k1 * emu);
|
|
|
|
/* fx8010 irq handler */
|
|
int snd_emu10k1_fx8010_register_irq_handler(struct snd_emu10k1 *emu,
|
|
snd_fx8010_irq_handler_t *handler,
|
|
unsigned char gpr_running,
|
|
void *private_data,
|
|
struct snd_emu10k1_fx8010_irq **r_irq);
|
|
int snd_emu10k1_fx8010_unregister_irq_handler(struct snd_emu10k1 *emu,
|
|
struct snd_emu10k1_fx8010_irq *irq);
|
|
|
|
#endif /* __KERNEL__ */
|
|
|
|
/*
|
|
* ---- FX8010 ----
|
|
*/
|
|
|
|
#define EMU10K1_CARD_CREATIVE 0x00000000
|
|
#define EMU10K1_CARD_EMUAPS 0x00000001
|
|
|
|
#define EMU10K1_FX8010_PCM_COUNT 8
|
|
|
|
/* instruction set */
|
|
#define iMAC0 0x00 /* R = A + (X * Y >> 31) ; saturation */
|
|
#define iMAC1 0x01 /* R = A + (-X * Y >> 31) ; saturation */
|
|
#define iMAC2 0x02 /* R = A + (X * Y >> 31) ; wraparound */
|
|
#define iMAC3 0x03 /* R = A + (-X * Y >> 31) ; wraparound */
|
|
#define iMACINT0 0x04 /* R = A + X * Y ; saturation */
|
|
#define iMACINT1 0x05 /* R = A + X * Y ; wraparound (31-bit) */
|
|
#define iACC3 0x06 /* R = A + X + Y ; saturation */
|
|
#define iMACMV 0x07 /* R = A, acc += X * Y >> 31 */
|
|
#define iANDXOR 0x08 /* R = (A & X) ^ Y */
|
|
#define iTSTNEG 0x09 /* R = (A >= Y) ? X : ~X */
|
|
#define iLIMITGE 0x0a /* R = (A >= Y) ? X : Y */
|
|
#define iLIMITLT 0x0b /* R = (A < Y) ? X : Y */
|
|
#define iLOG 0x0c /* R = linear_data, A (log_data), X (max_exp), Y (format_word) */
|
|
#define iEXP 0x0d /* R = log_data, A (linear_data), X (max_exp), Y (format_word) */
|
|
#define iINTERP 0x0e /* R = A + (X * (Y - A) >> 31) ; saturation */
|
|
#define iSKIP 0x0f /* R = A (cc_reg), X (count), Y (cc_test) */
|
|
|
|
/* GPRs */
|
|
#define FXBUS(x) (0x00 + (x)) /* x = 0x00 - 0x0f */
|
|
#define EXTIN(x) (0x10 + (x)) /* x = 0x00 - 0x0f */
|
|
#define EXTOUT(x) (0x20 + (x)) /* x = 0x00 - 0x0f physical outs -> FXWC low 16 bits */
|
|
#define FXBUS2(x) (0x30 + (x)) /* x = 0x00 - 0x0f copies of fx buses for capture -> FXWC high 16 bits */
|
|
/* NB: 0x31 and 0x32 are shared with Center/LFE on SB live 5.1 */
|
|
|
|
#define C_00000000 0x40
|
|
#define C_00000001 0x41
|
|
#define C_00000002 0x42
|
|
#define C_00000003 0x43
|
|
#define C_00000004 0x44
|
|
#define C_00000008 0x45
|
|
#define C_00000010 0x46
|
|
#define C_00000020 0x47
|
|
#define C_00000100 0x48
|
|
#define C_00010000 0x49
|
|
#define C_00080000 0x4a
|
|
#define C_10000000 0x4b
|
|
#define C_20000000 0x4c
|
|
#define C_40000000 0x4d
|
|
#define C_80000000 0x4e
|
|
#define C_7fffffff 0x4f
|
|
#define C_ffffffff 0x50
|
|
#define C_fffffffe 0x51
|
|
#define C_c0000000 0x52
|
|
#define C_4f1bbcdc 0x53
|
|
#define C_5a7ef9db 0x54
|
|
#define C_00100000 0x55 /* ?? */
|
|
#define GPR_ACCU 0x56 /* ACCUM, accumulator */
|
|
#define GPR_COND 0x57 /* CCR, condition register */
|
|
#define GPR_NOISE0 0x58 /* noise source */
|
|
#define GPR_NOISE1 0x59 /* noise source */
|
|
#define GPR_IRQ 0x5a /* IRQ register */
|
|
#define GPR_DBAC 0x5b /* TRAM Delay Base Address Counter */
|
|
#define GPR(x) (FXGPREGBASE + (x)) /* free GPRs: x = 0x00 - 0xff */
|
|
#define ITRAM_DATA(x) (TANKMEMDATAREGBASE + 0x00 + (x)) /* x = 0x00 - 0x7f */
|
|
#define ETRAM_DATA(x) (TANKMEMDATAREGBASE + 0x80 + (x)) /* x = 0x00 - 0x1f */
|
|
#define ITRAM_ADDR(x) (TANKMEMADDRREGBASE + 0x00 + (x)) /* x = 0x00 - 0x7f */
|
|
#define ETRAM_ADDR(x) (TANKMEMADDRREGBASE + 0x80 + (x)) /* x = 0x00 - 0x1f */
|
|
|
|
#define A_ITRAM_DATA(x) (TANKMEMDATAREGBASE + 0x00 + (x)) /* x = 0x00 - 0xbf */
|
|
#define A_ETRAM_DATA(x) (TANKMEMDATAREGBASE + 0xc0 + (x)) /* x = 0x00 - 0x3f */
|
|
#define A_ITRAM_ADDR(x) (TANKMEMADDRREGBASE + 0x00 + (x)) /* x = 0x00 - 0xbf */
|
|
#define A_ETRAM_ADDR(x) (TANKMEMADDRREGBASE + 0xc0 + (x)) /* x = 0x00 - 0x3f */
|
|
#define A_ITRAM_CTL(x) (A_TANKMEMCTLREGBASE + 0x00 + (x)) /* x = 0x00 - 0xbf */
|
|
#define A_ETRAM_CTL(x) (A_TANKMEMCTLREGBASE + 0xc0 + (x)) /* x = 0x00 - 0x3f */
|
|
|
|
#define A_FXBUS(x) (0x00 + (x)) /* x = 0x00 - 0x3f FX buses */
|
|
#define A_EXTIN(x) (0x40 + (x)) /* x = 0x00 - 0x0f physical ins */
|
|
#define A_P16VIN(x) (0x50 + (x)) /* x = 0x00 - 0x0f p16v ins (A2 only) "EMU32 inputs" */
|
|
#define A_EXTOUT(x) (0x60 + (x)) /* x = 0x00 - 0x1f physical outs -> A_FXWC1 0x79-7f unknown */
|
|
#define A_FXBUS2(x) (0x80 + (x)) /* x = 0x00 - 0x1f extra outs used for EFX capture -> A_FXWC2 */
|
|
#define A_EMU32OUTH(x) (0xa0 + (x)) /* x = 0x00 - 0x0f "EMU32_OUT_10 - _1F" - ??? */
|
|
#define A_EMU32OUTL(x) (0xb0 + (x)) /* x = 0x00 - 0x0f "EMU32_OUT_1 - _F" - ??? */
|
|
#define A_GPR(x) (A_FXGPREGBASE + (x))
|
|
|
|
/* cc_reg constants */
|
|
#define CC_REG_NORMALIZED C_00000001
|
|
#define CC_REG_BORROW C_00000002
|
|
#define CC_REG_MINUS C_00000004
|
|
#define CC_REG_ZERO C_00000008
|
|
#define CC_REG_SATURATE C_00000010
|
|
#define CC_REG_NONZERO C_00000100
|
|
|
|
/* FX buses */
|
|
#define FXBUS_PCM_LEFT 0x00
|
|
#define FXBUS_PCM_RIGHT 0x01
|
|
#define FXBUS_PCM_LEFT_REAR 0x02
|
|
#define FXBUS_PCM_RIGHT_REAR 0x03
|
|
#define FXBUS_MIDI_LEFT 0x04
|
|
#define FXBUS_MIDI_RIGHT 0x05
|
|
#define FXBUS_PCM_CENTER 0x06
|
|
#define FXBUS_PCM_LFE 0x07
|
|
#define FXBUS_PCM_LEFT_FRONT 0x08
|
|
#define FXBUS_PCM_RIGHT_FRONT 0x09
|
|
#define FXBUS_MIDI_REVERB 0x0c
|
|
#define FXBUS_MIDI_CHORUS 0x0d
|
|
#define FXBUS_PCM_LEFT_SIDE 0x0e
|
|
#define FXBUS_PCM_RIGHT_SIDE 0x0f
|
|
#define FXBUS_PT_LEFT 0x14
|
|
#define FXBUS_PT_RIGHT 0x15
|
|
|
|
/* Inputs */
|
|
#define EXTIN_AC97_L 0x00 /* AC'97 capture channel - left */
|
|
#define EXTIN_AC97_R 0x01 /* AC'97 capture channel - right */
|
|
#define EXTIN_SPDIF_CD_L 0x02 /* internal S/PDIF CD - onboard - left */
|
|
#define EXTIN_SPDIF_CD_R 0x03 /* internal S/PDIF CD - onboard - right */
|
|
#define EXTIN_ZOOM_L 0x04 /* Zoom Video I2S - left */
|
|
#define EXTIN_ZOOM_R 0x05 /* Zoom Video I2S - right */
|
|
#define EXTIN_TOSLINK_L 0x06 /* LiveDrive - TOSLink Optical - left */
|
|
#define EXTIN_TOSLINK_R 0x07 /* LiveDrive - TOSLink Optical - right */
|
|
#define EXTIN_LINE1_L 0x08 /* LiveDrive - Line/Mic 1 - left */
|
|
#define EXTIN_LINE1_R 0x09 /* LiveDrive - Line/Mic 1 - right */
|
|
#define EXTIN_COAX_SPDIF_L 0x0a /* LiveDrive - Coaxial S/PDIF - left */
|
|
#define EXTIN_COAX_SPDIF_R 0x0b /* LiveDrive - Coaxial S/PDIF - right */
|
|
#define EXTIN_LINE2_L 0x0c /* LiveDrive - Line/Mic 2 - left */
|
|
#define EXTIN_LINE2_R 0x0d /* LiveDrive - Line/Mic 2 - right */
|
|
|
|
/* Outputs */
|
|
#define EXTOUT_AC97_L 0x00 /* AC'97 playback channel - left */
|
|
#define EXTOUT_AC97_R 0x01 /* AC'97 playback channel - right */
|
|
#define EXTOUT_TOSLINK_L 0x02 /* LiveDrive - TOSLink Optical - left */
|
|
#define EXTOUT_TOSLINK_R 0x03 /* LiveDrive - TOSLink Optical - right */
|
|
#define EXTOUT_AC97_CENTER 0x04 /* SB Live 5.1 - center */
|
|
#define EXTOUT_AC97_LFE 0x05 /* SB Live 5.1 - LFE */
|
|
#define EXTOUT_HEADPHONE_L 0x06 /* LiveDrive - Headphone - left */
|
|
#define EXTOUT_HEADPHONE_R 0x07 /* LiveDrive - Headphone - right */
|
|
#define EXTOUT_REAR_L 0x08 /* Rear channel - left */
|
|
#define EXTOUT_REAR_R 0x09 /* Rear channel - right */
|
|
#define EXTOUT_ADC_CAP_L 0x0a /* ADC Capture buffer - left */
|
|
#define EXTOUT_ADC_CAP_R 0x0b /* ADC Capture buffer - right */
|
|
#define EXTOUT_MIC_CAP 0x0c /* MIC Capture buffer */
|
|
#define EXTOUT_AC97_REAR_L 0x0d /* SB Live 5.1 (c) 2003 - Rear Left */
|
|
#define EXTOUT_AC97_REAR_R 0x0e /* SB Live 5.1 (c) 2003 - Rear Right */
|
|
#define EXTOUT_ACENTER 0x11 /* Analog Center */
|
|
#define EXTOUT_ALFE 0x12 /* Analog LFE */
|
|
|
|
/* Audigy Inputs */
|
|
#define A_EXTIN_AC97_L 0x00 /* AC'97 capture channel - left */
|
|
#define A_EXTIN_AC97_R 0x01 /* AC'97 capture channel - right */
|
|
#define A_EXTIN_SPDIF_CD_L 0x02 /* digital CD left */
|
|
#define A_EXTIN_SPDIF_CD_R 0x03 /* digital CD left */
|
|
#define A_EXTIN_OPT_SPDIF_L 0x04 /* audigy drive Optical SPDIF - left */
|
|
#define A_EXTIN_OPT_SPDIF_R 0x05 /* right */
|
|
#define A_EXTIN_LINE2_L 0x08 /* audigy drive line2/mic2 - left */
|
|
#define A_EXTIN_LINE2_R 0x09 /* right */
|
|
#define A_EXTIN_ADC_L 0x0a /* Philips ADC - left */
|
|
#define A_EXTIN_ADC_R 0x0b /* right */
|
|
#define A_EXTIN_AUX2_L 0x0c /* audigy drive aux2 - left */
|
|
#define A_EXTIN_AUX2_R 0x0d /* - right */
|
|
|
|
/* Audigiy Outputs */
|
|
#define A_EXTOUT_FRONT_L 0x00 /* digital front left */
|
|
#define A_EXTOUT_FRONT_R 0x01 /* right */
|
|
#define A_EXTOUT_CENTER 0x02 /* digital front center */
|
|
#define A_EXTOUT_LFE 0x03 /* digital front lfe */
|
|
#define A_EXTOUT_HEADPHONE_L 0x04 /* headphone audigy drive left */
|
|
#define A_EXTOUT_HEADPHONE_R 0x05 /* right */
|
|
#define A_EXTOUT_REAR_L 0x06 /* digital rear left */
|
|
#define A_EXTOUT_REAR_R 0x07 /* right */
|
|
#define A_EXTOUT_AFRONT_L 0x08 /* analog front left */
|
|
#define A_EXTOUT_AFRONT_R 0x09 /* right */
|
|
#define A_EXTOUT_ACENTER 0x0a /* analog center */
|
|
#define A_EXTOUT_ALFE 0x0b /* analog LFE */
|
|
#define A_EXTOUT_ASIDE_L 0x0c /* analog side left - Audigy 2 ZS */
|
|
#define A_EXTOUT_ASIDE_R 0x0d /* right - Audigy 2 ZS */
|
|
#define A_EXTOUT_AREAR_L 0x0e /* analog rear left */
|
|
#define A_EXTOUT_AREAR_R 0x0f /* right */
|
|
#define A_EXTOUT_AC97_L 0x10 /* AC97 left (front) */
|
|
#define A_EXTOUT_AC97_R 0x11 /* right */
|
|
#define A_EXTOUT_ADC_CAP_L 0x16 /* ADC capture buffer left */
|
|
#define A_EXTOUT_ADC_CAP_R 0x17 /* right */
|
|
#define A_EXTOUT_MIC_CAP 0x18 /* Mic capture buffer */
|
|
|
|
/* Audigy constants */
|
|
#define A_C_00000000 0xc0
|
|
#define A_C_00000001 0xc1
|
|
#define A_C_00000002 0xc2
|
|
#define A_C_00000003 0xc3
|
|
#define A_C_00000004 0xc4
|
|
#define A_C_00000008 0xc5
|
|
#define A_C_00000010 0xc6
|
|
#define A_C_00000020 0xc7
|
|
#define A_C_00000100 0xc8
|
|
#define A_C_00010000 0xc9
|
|
#define A_C_00000800 0xca
|
|
#define A_C_10000000 0xcb
|
|
#define A_C_20000000 0xcc
|
|
#define A_C_40000000 0xcd
|
|
#define A_C_80000000 0xce
|
|
#define A_C_7fffffff 0xcf
|
|
#define A_C_ffffffff 0xd0
|
|
#define A_C_fffffffe 0xd1
|
|
#define A_C_c0000000 0xd2
|
|
#define A_C_4f1bbcdc 0xd3
|
|
#define A_C_5a7ef9db 0xd4
|
|
#define A_C_00100000 0xd5
|
|
#define A_GPR_ACCU 0xd6 /* ACCUM, accumulator */
|
|
#define A_GPR_COND 0xd7 /* CCR, condition register */
|
|
#define A_GPR_NOISE0 0xd8 /* noise source */
|
|
#define A_GPR_NOISE1 0xd9 /* noise source */
|
|
#define A_GPR_IRQ 0xda /* IRQ register */
|
|
#define A_GPR_DBAC 0xdb /* TRAM Delay Base Address Counter - internal */
|
|
#define A_GPR_DBACE 0xde /* TRAM Delay Base Address Counter - external */
|
|
|
|
/* definitions for debug register */
|
|
#define EMU10K1_DBG_ZC 0x80000000 /* zero tram counter */
|
|
#define EMU10K1_DBG_SATURATION_OCCURED 0x02000000 /* saturation control */
|
|
#define EMU10K1_DBG_SATURATION_ADDR 0x01ff0000 /* saturation address */
|
|
#define EMU10K1_DBG_SINGLE_STEP 0x00008000 /* single step mode */
|
|
#define EMU10K1_DBG_STEP 0x00004000 /* start single step */
|
|
#define EMU10K1_DBG_CONDITION_CODE 0x00003e00 /* condition code */
|
|
#define EMU10K1_DBG_SINGLE_STEP_ADDR 0x000001ff /* single step address */
|
|
|
|
/* tank memory address line */
|
|
#ifndef __KERNEL__
|
|
#define TANKMEMADDRREG_ADDR_MASK 0x000fffff /* 20 bit tank address field */
|
|
#define TANKMEMADDRREG_CLEAR 0x00800000 /* Clear tank memory */
|
|
#define TANKMEMADDRREG_ALIGN 0x00400000 /* Align read or write relative to tank access */
|
|
#define TANKMEMADDRREG_WRITE 0x00200000 /* Write to tank memory */
|
|
#define TANKMEMADDRREG_READ 0x00100000 /* Read from tank memory */
|
|
#endif
|
|
|
|
struct snd_emu10k1_fx8010_info {
|
|
unsigned int internal_tram_size; /* in samples */
|
|
unsigned int external_tram_size; /* in samples */
|
|
char fxbus_names[16][32]; /* names of FXBUSes */
|
|
char extin_names[16][32]; /* names of external inputs */
|
|
char extout_names[32][32]; /* names of external outputs */
|
|
unsigned int gpr_controls; /* count of GPR controls */
|
|
};
|
|
|
|
#define EMU10K1_GPR_TRANSLATION_NONE 0
|
|
#define EMU10K1_GPR_TRANSLATION_TABLE100 1
|
|
#define EMU10K1_GPR_TRANSLATION_BASS 2
|
|
#define EMU10K1_GPR_TRANSLATION_TREBLE 3
|
|
#define EMU10K1_GPR_TRANSLATION_ONOFF 4
|
|
|
|
struct snd_emu10k1_fx8010_control_gpr {
|
|
struct snd_ctl_elem_id id; /* full control ID definition */
|
|
unsigned int vcount; /* visible count */
|
|
unsigned int count; /* count of GPR (1..16) */
|
|
unsigned short gpr[32]; /* GPR number(s) */
|
|
unsigned int value[32]; /* initial values */
|
|
unsigned int min; /* minimum range */
|
|
unsigned int max; /* maximum range */
|
|
union {
|
|
snd_kcontrol_tlv_rw_t *c;
|
|
unsigned int *p;
|
|
} tlv;
|
|
unsigned int translation; /* translation type (EMU10K1_GPR_TRANSLATION*) */
|
|
};
|
|
|
|
struct snd_emu10k1_fx8010_code {
|
|
char name[128];
|
|
|
|
DECLARE_BITMAP(gpr_valid, 0x200); /* bitmask of valid initializers */
|
|
u_int32_t __user *gpr_map; /* initializers */
|
|
|
|
unsigned int gpr_add_control_count; /* count of GPR controls to add/replace */
|
|
struct snd_emu10k1_fx8010_control_gpr __user *gpr_add_controls; /* GPR controls to add/replace */
|
|
|
|
unsigned int gpr_del_control_count; /* count of GPR controls to remove */
|
|
struct snd_ctl_elem_id __user *gpr_del_controls; /* IDs of GPR controls to remove */
|
|
|
|
unsigned int gpr_list_control_count; /* count of GPR controls to list */
|
|
unsigned int gpr_list_control_total; /* total count of GPR controls */
|
|
struct snd_emu10k1_fx8010_control_gpr __user *gpr_list_controls; /* listed GPR controls */
|
|
|
|
DECLARE_BITMAP(tram_valid, 0x100); /* bitmask of valid initializers */
|
|
u_int32_t __user *tram_data_map; /* data initializers */
|
|
u_int32_t __user *tram_addr_map; /* map initializers */
|
|
|
|
DECLARE_BITMAP(code_valid, 1024); /* bitmask of valid instructions */
|
|
u_int32_t __user *code; /* one instruction - 64 bits */
|
|
};
|
|
|
|
struct snd_emu10k1_fx8010_tram {
|
|
unsigned int address; /* 31.bit == 1 -> external TRAM */
|
|
unsigned int size; /* size in samples (4 bytes) */
|
|
unsigned int *samples; /* pointer to samples (20-bit) */
|
|
/* NULL->clear memory */
|
|
};
|
|
|
|
struct snd_emu10k1_fx8010_pcm_rec {
|
|
unsigned int substream; /* substream number */
|
|
unsigned int res1; /* reserved */
|
|
unsigned int channels; /* 16-bit channels count, zero = remove this substream */
|
|
unsigned int tram_start; /* ring buffer position in TRAM (in samples) */
|
|
unsigned int buffer_size; /* count of buffered samples */
|
|
unsigned short gpr_size; /* GPR containing size of ringbuffer in samples (host) */
|
|
unsigned short gpr_ptr; /* GPR containing current pointer in the ring buffer (host = reset, FX8010) */
|
|
unsigned short gpr_count; /* GPR containing count of samples between two interrupts (host) */
|
|
unsigned short gpr_tmpcount; /* GPR containing current count of samples to interrupt (host = set, FX8010) */
|
|
unsigned short gpr_trigger; /* GPR containing trigger (activate) information (host) */
|
|
unsigned short gpr_running; /* GPR containing info if PCM is running (FX8010) */
|
|
unsigned char pad; /* reserved */
|
|
unsigned char etram[32]; /* external TRAM address & data (one per channel) */
|
|
unsigned int res2; /* reserved */
|
|
};
|
|
|
|
#define SNDRV_EMU10K1_IOCTL_INFO _IOR ('H', 0x10, struct snd_emu10k1_fx8010_info)
|
|
#define SNDRV_EMU10K1_IOCTL_CODE_POKE _IOW ('H', 0x11, struct snd_emu10k1_fx8010_code)
|
|
#define SNDRV_EMU10K1_IOCTL_CODE_PEEK _IOWR('H', 0x12, struct snd_emu10k1_fx8010_code)
|
|
#define SNDRV_EMU10K1_IOCTL_TRAM_SETUP _IOW ('H', 0x20, int)
|
|
#define SNDRV_EMU10K1_IOCTL_TRAM_POKE _IOW ('H', 0x21, struct snd_emu10k1_fx8010_tram)
|
|
#define SNDRV_EMU10K1_IOCTL_TRAM_PEEK _IOWR('H', 0x22, struct snd_emu10k1_fx8010_tram)
|
|
#define SNDRV_EMU10K1_IOCTL_PCM_POKE _IOW ('H', 0x30, struct snd_emu10k1_fx8010_pcm_rec)
|
|
#define SNDRV_EMU10K1_IOCTL_PCM_PEEK _IOWR('H', 0x31, struct snd_emu10k1_fx8010_pcm_rec)
|
|
#define SNDRV_EMU10K1_IOCTL_STOP _IO ('H', 0x80)
|
|
#define SNDRV_EMU10K1_IOCTL_CONTINUE _IO ('H', 0x81)
|
|
#define SNDRV_EMU10K1_IOCTL_ZERO_TRAM_COUNTER _IO ('H', 0x82)
|
|
#define SNDRV_EMU10K1_IOCTL_SINGLE_STEP _IOW ('H', 0x83, int)
|
|
#define SNDRV_EMU10K1_IOCTL_DBG_READ _IOR ('H', 0x84, int)
|
|
|
|
/* typedefs for compatibility to user-space */
|
|
typedef struct snd_emu10k1_fx8010_info emu10k1_fx8010_info_t;
|
|
typedef struct snd_emu10k1_fx8010_control_gpr emu10k1_fx8010_control_gpr_t;
|
|
typedef struct snd_emu10k1_fx8010_code emu10k1_fx8010_code_t;
|
|
typedef struct snd_emu10k1_fx8010_tram emu10k1_fx8010_tram_t;
|
|
typedef struct snd_emu10k1_fx8010_pcm_rec emu10k1_fx8010_pcm_t;
|
|
|
|
#endif /* __SOUND_EMU10K1_H */
|