mirror of
https://github.com/torvalds/linux.git
synced 2024-11-17 09:31:50 +00:00
8659c406ad
We found a situation on Linus' machine that the Nvidia timer quirk hit on a Intel chipset system. The problem is that the system has a fancy Nvidia card with an own PCI bridge, and the early-quirks code looking for any NVidia bridge triggered on it incorrectly. This didn't lead a boot failure by luck, but the timer routing code selecting the wrong timer first and some ugly messages. It might lead to real problems on other systems. I checked all the devices which are currently checked for by early_quirks and it turns out they are all located in the root bus zero. So change the early-quirks loop to only scan bus 0. This incidently also saves quite some unnecessary scanning work, because early_quirks doesn't go through all the non root busses. The graphics card is not on bus 0, so it is not matched anymore. Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
290 lines
7.2 KiB
C
290 lines
7.2 KiB
C
/* Various workarounds for chipset bugs.
|
|
This code runs very early and can't use the regular PCI subsystem
|
|
The entries are keyed to PCI bridges which usually identify chipsets
|
|
uniquely.
|
|
This is only for whole classes of chipsets with specific problems which
|
|
need early invasive action (e.g. before the timers are initialized).
|
|
Most PCI device specific workarounds can be done later and should be
|
|
in standard PCI quirks
|
|
Mainboard specific bugs should be handled by DMI entries.
|
|
CPU specific bugs in setup.c */
|
|
|
|
#include <linux/pci.h>
|
|
#include <linux/acpi.h>
|
|
#include <linux/pci_ids.h>
|
|
#include <asm/pci-direct.h>
|
|
#include <asm/dma.h>
|
|
#include <asm/io_apic.h>
|
|
#include <asm/apic.h>
|
|
#include <asm/iommu.h>
|
|
#include <asm/gart.h>
|
|
|
|
static void __init fix_hypertransport_config(int num, int slot, int func)
|
|
{
|
|
u32 htcfg;
|
|
/*
|
|
* we found a hypertransport bus
|
|
* make sure that we are broadcasting
|
|
* interrupts to all cpus on the ht bus
|
|
* if we're using extended apic ids
|
|
*/
|
|
htcfg = read_pci_config(num, slot, func, 0x68);
|
|
if (htcfg & (1 << 18)) {
|
|
printk(KERN_INFO "Detected use of extended apic ids "
|
|
"on hypertransport bus\n");
|
|
if ((htcfg & (1 << 17)) == 0) {
|
|
printk(KERN_INFO "Enabling hypertransport extended "
|
|
"apic interrupt broadcast\n");
|
|
printk(KERN_INFO "Note this is a bios bug, "
|
|
"please contact your hw vendor\n");
|
|
htcfg |= (1 << 17);
|
|
write_pci_config(num, slot, func, 0x68, htcfg);
|
|
}
|
|
}
|
|
|
|
|
|
}
|
|
|
|
static void __init via_bugs(int num, int slot, int func)
|
|
{
|
|
#ifdef CONFIG_GART_IOMMU
|
|
if ((max_pfn > MAX_DMA32_PFN || force_iommu) &&
|
|
!gart_iommu_aperture_allowed) {
|
|
printk(KERN_INFO
|
|
"Looks like a VIA chipset. Disabling IOMMU."
|
|
" Override with iommu=allowed\n");
|
|
gart_iommu_aperture_disabled = 1;
|
|
}
|
|
#endif
|
|
}
|
|
|
|
#ifdef CONFIG_ACPI
|
|
#ifdef CONFIG_X86_IO_APIC
|
|
|
|
static int __init nvidia_hpet_check(struct acpi_table_header *header)
|
|
{
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_X86_IO_APIC */
|
|
#endif /* CONFIG_ACPI */
|
|
|
|
static void __init nvidia_bugs(int num, int slot, int func)
|
|
{
|
|
#ifdef CONFIG_ACPI
|
|
#ifdef CONFIG_X86_IO_APIC
|
|
/*
|
|
* All timer overrides on Nvidia are
|
|
* wrong unless HPET is enabled.
|
|
* Unfortunately that's not true on many Asus boards.
|
|
* We don't know yet how to detect this automatically, but
|
|
* at least allow a command line override.
|
|
*/
|
|
if (acpi_use_timer_override)
|
|
return;
|
|
|
|
if (acpi_table_parse(ACPI_SIG_HPET, nvidia_hpet_check)) {
|
|
acpi_skip_timer_override = 1;
|
|
printk(KERN_INFO "Nvidia board "
|
|
"detected. Ignoring ACPI "
|
|
"timer override.\n");
|
|
printk(KERN_INFO "If you got timer trouble "
|
|
"try acpi_use_timer_override\n");
|
|
}
|
|
#endif
|
|
#endif
|
|
/* RED-PEN skip them on mptables too? */
|
|
|
|
}
|
|
|
|
#if defined(CONFIG_ACPI) && defined(CONFIG_X86_IO_APIC)
|
|
static u32 __init ati_ixp4x0_rev(int num, int slot, int func)
|
|
{
|
|
u32 d;
|
|
u8 b;
|
|
|
|
b = read_pci_config_byte(num, slot, func, 0xac);
|
|
b &= ~(1<<5);
|
|
write_pci_config_byte(num, slot, func, 0xac, b);
|
|
|
|
d = read_pci_config(num, slot, func, 0x70);
|
|
d |= 1<<8;
|
|
write_pci_config(num, slot, func, 0x70, d);
|
|
|
|
d = read_pci_config(num, slot, func, 0x8);
|
|
d &= 0xff;
|
|
return d;
|
|
}
|
|
|
|
static void __init ati_bugs(int num, int slot, int func)
|
|
{
|
|
u32 d;
|
|
u8 b;
|
|
|
|
if (acpi_use_timer_override)
|
|
return;
|
|
|
|
d = ati_ixp4x0_rev(num, slot, func);
|
|
if (d < 0x82)
|
|
acpi_skip_timer_override = 1;
|
|
else {
|
|
/* check for IRQ0 interrupt swap */
|
|
outb(0x72, 0xcd6); b = inb(0xcd7);
|
|
if (!(b & 0x2))
|
|
acpi_skip_timer_override = 1;
|
|
}
|
|
|
|
if (acpi_skip_timer_override) {
|
|
printk(KERN_INFO "SB4X0 revision 0x%x\n", d);
|
|
printk(KERN_INFO "Ignoring ACPI timer override.\n");
|
|
printk(KERN_INFO "If you got timer trouble "
|
|
"try acpi_use_timer_override\n");
|
|
}
|
|
}
|
|
|
|
static u32 __init ati_sbx00_rev(int num, int slot, int func)
|
|
{
|
|
u32 old, d;
|
|
|
|
d = read_pci_config(num, slot, func, 0x70);
|
|
old = d;
|
|
d &= ~(1<<8);
|
|
write_pci_config(num, slot, func, 0x70, d);
|
|
d = read_pci_config(num, slot, func, 0x8);
|
|
d &= 0xff;
|
|
write_pci_config(num, slot, func, 0x70, old);
|
|
|
|
return d;
|
|
}
|
|
|
|
static void __init ati_bugs_contd(int num, int slot, int func)
|
|
{
|
|
u32 d, rev;
|
|
|
|
if (acpi_use_timer_override)
|
|
return;
|
|
|
|
rev = ati_sbx00_rev(num, slot, func);
|
|
if (rev > 0x13)
|
|
return;
|
|
|
|
/* check for IRQ0 interrupt swap */
|
|
d = read_pci_config(num, slot, func, 0x64);
|
|
if (!(d & (1<<14)))
|
|
acpi_skip_timer_override = 1;
|
|
|
|
if (acpi_skip_timer_override) {
|
|
printk(KERN_INFO "SB600 revision 0x%x\n", rev);
|
|
printk(KERN_INFO "Ignoring ACPI timer override.\n");
|
|
printk(KERN_INFO "If you got timer trouble "
|
|
"try acpi_use_timer_override\n");
|
|
}
|
|
}
|
|
#else
|
|
static void __init ati_bugs(int num, int slot, int func)
|
|
{
|
|
}
|
|
|
|
static void __init ati_bugs_contd(int num, int slot, int func)
|
|
{
|
|
}
|
|
#endif
|
|
|
|
#define QFLAG_APPLY_ONCE 0x1
|
|
#define QFLAG_APPLIED 0x2
|
|
#define QFLAG_DONE (QFLAG_APPLY_ONCE|QFLAG_APPLIED)
|
|
struct chipset {
|
|
u32 vendor;
|
|
u32 device;
|
|
u32 class;
|
|
u32 class_mask;
|
|
u32 flags;
|
|
void (*f)(int num, int slot, int func);
|
|
};
|
|
|
|
/*
|
|
* Only works for devices on the root bus. If you add any devices
|
|
* not on bus 0 readd another loop level in early_quirks(). But
|
|
* be careful because at least the Nvidia quirk here relies on
|
|
* only matching on bus 0.
|
|
*/
|
|
static struct chipset early_qrk[] __initdata = {
|
|
{ PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID,
|
|
PCI_CLASS_BRIDGE_PCI, PCI_ANY_ID, QFLAG_APPLY_ONCE, nvidia_bugs },
|
|
{ PCI_VENDOR_ID_VIA, PCI_ANY_ID,
|
|
PCI_CLASS_BRIDGE_PCI, PCI_ANY_ID, QFLAG_APPLY_ONCE, via_bugs },
|
|
{ PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB,
|
|
PCI_CLASS_BRIDGE_HOST, PCI_ANY_ID, 0, fix_hypertransport_config },
|
|
{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS,
|
|
PCI_CLASS_SERIAL_SMBUS, PCI_ANY_ID, 0, ati_bugs },
|
|
{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS,
|
|
PCI_CLASS_SERIAL_SMBUS, PCI_ANY_ID, 0, ati_bugs_contd },
|
|
{}
|
|
};
|
|
|
|
/**
|
|
* check_dev_quirk - apply early quirks to a given PCI device
|
|
* @num: bus number
|
|
* @slot: slot number
|
|
* @func: PCI function
|
|
*
|
|
* Check the vendor & device ID against the early quirks table.
|
|
*
|
|
* If the device is single function, let early_quirks() know so we don't
|
|
* poke at this device again.
|
|
*/
|
|
static int __init check_dev_quirk(int num, int slot, int func)
|
|
{
|
|
u16 class;
|
|
u16 vendor;
|
|
u16 device;
|
|
u8 type;
|
|
int i;
|
|
|
|
class = read_pci_config_16(num, slot, func, PCI_CLASS_DEVICE);
|
|
|
|
if (class == 0xffff)
|
|
return -1; /* no class, treat as single function */
|
|
|
|
vendor = read_pci_config_16(num, slot, func, PCI_VENDOR_ID);
|
|
|
|
device = read_pci_config_16(num, slot, func, PCI_DEVICE_ID);
|
|
|
|
for (i = 0; early_qrk[i].f != NULL; i++) {
|
|
if (((early_qrk[i].vendor == PCI_ANY_ID) ||
|
|
(early_qrk[i].vendor == vendor)) &&
|
|
((early_qrk[i].device == PCI_ANY_ID) ||
|
|
(early_qrk[i].device == device)) &&
|
|
(!((early_qrk[i].class ^ class) &
|
|
early_qrk[i].class_mask))) {
|
|
if ((early_qrk[i].flags &
|
|
QFLAG_DONE) != QFLAG_DONE)
|
|
early_qrk[i].f(num, slot, func);
|
|
early_qrk[i].flags |= QFLAG_APPLIED;
|
|
}
|
|
}
|
|
|
|
type = read_pci_config_byte(num, slot, func,
|
|
PCI_HEADER_TYPE);
|
|
if (!(type & 0x80))
|
|
return -1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
void __init early_quirks(void)
|
|
{
|
|
int slot, func;
|
|
|
|
if (!early_pci_allowed())
|
|
return;
|
|
|
|
/* Poor man's PCI discovery */
|
|
/* Only scan the root bus */
|
|
for (slot = 0; slot < 32; slot++)
|
|
for (func = 0; func < 8; func++) {
|
|
/* Only probe function 0 on single fn devices */
|
|
if (check_dev_quirk(0, slot, func))
|
|
break;
|
|
}
|
|
}
|