Linus Walleij adc8ec5ff1 iio: inkern: pass through raw values if no scaling ... When a consumer calls iio_read_channel_processed() the IIO core tries to apply scaling to the value, but if the channel only supports reading raw values, we should return that raw value to the cosumer instead of an error. This is what userspace is expected to do with sensors only providing raw values so the kernel should do the same, so as to avoid adding scaling boilerplate to drivers for hardware that actually return processed values from raw reads. A sensor not providing a scale, but providing a _raw attribute could be valid if for example the scale is the default of 1, but an offset needs to be applied to convert to the _processed form. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>		2017-01-14 12:20:18 +00:00
..
accel	iio:kfifo_buf header include push down.	2017-01-10 19:54:53 +00:00
adc	iio:adc:qcom-spmi-vadc: use div64_s64 instead of direct 64 bit division.	2017-01-10 21:13:39 +00:00
amplifiers
buffer	iio:buffer.h - split into buffer.h and buffer_impl.h	2017-01-10 19:54:55 +00:00
chemical	iio:chemical:atlas-ph-sensor: Fix use of 32 bit int to hold 16 bit big endian value	2016-10-23 22:18:27 +01:00
common	iio:kfifo_buf header include push down.	2017-01-10 19:54:53 +00:00
counter	iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8	2016-10-01 17:06:21 +01:00
dac	iio: dac: ad5593r: Add ACPI support	2016-12-30 17:20:14 +00:00
dummy	iio:dummy: Stop enabling timestamp by default.	2017-01-10 19:54:55 +00:00
frequency	iio: frequency: ad9523: use unsigned int rather then bare unsigned	2016-04-17 10:31:03 +01:00
gyro	iio:kfifo_buf header include push down.	2017-01-10 19:54:53 +00:00
health	First round of IIO new device support, features and cleanups for the 4.8 cycle.	2016-06-09 09:15:58 -07:00
humidity	iio: humidity: Support acpi probe for hts211	2016-12-03 08:56:28 +00:00
imu	iio: bmi160: Add of device table for spi	2016-12-30 10:38:19 +00:00
light	iio: light: add driver for Capella CM3605	2016-12-30 17:17:39 +00:00
magnetometer	iio: magnetometer: separate the values of attributes based on their usage type for HID compass sensor	2016-11-24 20:41:30 +00:00
orientation	iio: orientation: hid-sensor-rotation: Add PM function (fix non working driver)	2016-11-05 17:47:47 +00:00
potentiometer	iio: mcp4531: provide range of available raw values	2016-11-13 11:40:26 +00:00
potentiostat	iio: potentiostat: add LMP91000 support	2016-09-27 20:33:03 +01:00
pressure	iio: st_pressure: Export sampling frequency for lps25h and lps331ap	2016-12-30 11:33:56 +00:00
proximity	iio: pulsedlight-lidar-lite-v2: add lidar-lite-v3 property	2016-12-31 15:18:31 +00:00
temperature	iio:temperature: Add support for TI TMP007 sensor	2017-01-14 10:45:05 +00:00
trigger	iio:trigger: Experimental kthread tight loop trigger (thread only)	2016-06-03 13:18:44 +01:00
iio_core_trigger.h
iio_core.h	iio:core: timestamping clock selection support	2016-06-30 19:41:38 +01:00
industrialio-buffer.c	iio:buffer.h - split into buffer.h and buffer_impl.h	2017-01-10 19:54:55 +00:00
industrialio-configfs.c
industrialio-core.c	iio:buffer.h - split into buffer.h and buffer_impl.h	2017-01-10 19:54:55 +00:00
industrialio-event.c	iio: iio_push_event(): Don't crash if the event interface is not registered	2016-09-10 16:40:44 +01:00
industrialio-sw-device.c	iio: Add support for creating IIO devices via configfs	2016-05-04 11:43:54 +01:00
industrialio-sw-trigger.c
industrialio-trigger.c	iio:trigger: Add helper function to verify that a trigger belongs to the same device	2016-09-27 20:32:55 +01:00
industrialio-triggered-event.c
inkern.c	iio: inkern: pass through raw values if no scaling	2017-01-14 12:20:18 +00:00
Kconfig	iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8	2016-10-01 17:06:21 +01:00
Makefile	iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8	2016-10-01 17:06:21 +01:00